Help me!!! SWFLoader loads black screen in front of Flashpaper2

if(printVB.getChildByName("fpSendfax")){printVB.re moveChild(printVB.getChildByName("fpSendfax"));}
var ldr:SWFLoader = new SWFLoader();
ldr.name = "fpSendfax";
var url:String = "flash/flashpaperloader.swf";
ldr.load(url);
ldr.addEventListener(Event.COMPLETE, function(event:Event):void {printVB.addChild(ldr)});
I use the above code to load a flashpaper which is generated by coldfusion cfc. When I load the movie for the first time it works great.
If i reload another movie I get a black screen and the flashpaper loads in the background.
why???
It there anything we can do?

I'm having the exact same problem... did you find a solution????

Similar Messages

Windows boots but won't load (Black screen with cursor)

[Sorry for the long post, but I feel the need to fully explain my situation]
I have the following problem:
I turn on my PC, and Windows shows it's normal loading screen, after which it goes into a completely black screen, with just the mouse in the middle. By the cursor size I can tell that it's in a low resolution, probably 800x600 (compared to my usual 1920x1080). I am able to move the mouse around, but with no particular use without something to click on. No other keyboard input seems to work, except for Shift key 5 times, which brings up the Sticky Keys dialog box (with just "Yes" or "No" options, no other link); and Windows key+U which brings up the Ease of Access center. Ctr+Alt+Del does NOT work.
So far this is what I have tried (in chronological order):
Boot into Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Booting in low resolution video, Last known good configuration: all yield the same result as booting normally.
Repair your computer:
Startup Repair: Found Registry Errors (I realized and fixed this later on)
System Restore: Did not find any previous restore points (I know for sure that there are, I made a habit of making restore points regularly).
Windows Memory Diagnostics: Did not find errors.
Command prompt:
Ran chkdsk /f /r command, did not report errors.
Ran sfc /scannow : I don't remember the exact report, but it asked for a restart to finish repairing problems. I restarted, and ran the command again for the same result.
Forced the scan with: sfc /scannow /offbootdir=c:\ /offwindir=c:\windows , it found and repaired some errors, still could not load windows.
Ran Dell Startup Diagnostics, found no errors.
Ran Startup Repair again, found the registry errors again. I found the solution to this in a Microsoft Help forum ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ), and fixed the issue. I rebooted, but the problem persists.
Startup Repair now finds no errors. I tried System Restore again, it found 2 restore points dated AFTER my problem started. I decided to restore anyways, but neither of them worked.
I ran Windows Defender Offline:
Quick Scan: and found 2 threats and removed them.
Full System Scan: found 4 more threats, removed 2 of them, the other two couldn't be removed because they were within an ISO file.
I tried Steps 1, 2 and 3 again with no luck.
With each step I am aware that I'm closer to having to reinstall Windows, so I decided to see if I could still access my HHDD to save my personal files. I made a Linux live CD (with Ubuntu), but I am having trouble mounting the drives, because they are in a RAID0 configuration. "sudo dmraid -s" gives the following error: "ERROR: isw: wrong number of devices in RAID set "isw_dbdffjficc_ARRAY0" [1/2] on /dev/sdb".
Important Details:
I changed my graphics card about 4 months ago (an Nvidia GTX 750ti for an ATI Radeon HD 6450), and I was told that I may be running short with the Power Supply. The new card asks for a minimum of 450W and I think my PSU is 460W. This may or may not have something to do with this issue, I have no idea.
The RAID0 configuration of my 2 500GB Hard Drives brought me a lot of problems from day 1. One of the HDD would randomly fail (I am able to hear a different clicking sound when this happens), and the computer would crash. Upon startup, it would ask for a boot device. The Dell startup utility would then only recognize 1 of the drives, but would finish without errors. After a restart or two, all would be fine and windows would boot normally (aside from the usual error recovery screen) without any sign of corrupted data or anything. Like I said, this has been happening form the day my PC arrived, but restarting a couple of times always fixed it. As of now, both HHDD seem to be working fine, the Dell utility recognizes both of them, and does not find errors in any of them, and I can access any directory from the command prompt.
Is there anything else I should try before reinstalling Windows?
Before the install, I would really like to be able to recover my files (I have important documents from college), is there any way to do this?
Sorry again for the extremely long post (and for any language errors, English is not my native language), and thanks in advance.

Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
Use a Windows 7 Reinstallation DVD when installing ensure you select...
Select Custom: Install Windows only (advanced)
If you do not select any of the drive options and simply highlight the largest partition and select next:
Windows will dump all the old installation files in the Windows.old folder

HELP!!! Black screen, nothing helps

PLease help. My ibook g4 started having black screen: i can hear the chime but the screen remains black. Sometimes it does turn on, but almost immediately the message asking to restart appears. I have tried all the regular fixes: setting changing, os re-installed etc. Support told me that it is probably hardware issue. What do I do now? Do I go to the store and pay them to fix it? Does anyone know how much? Please help.

Andosia, did you call Apple?  What did they say?
I've had a dead iBook G4 since last November-ish.  There are a few suggested fixes, one of which is taking your iBook apart and putting a shim in the case to put pressure on the chip.
A couple of months ago I put a wood clamp on the left palm rest of my iBook and it booted up without a problem.  I had it running (with the clamp attached) for nearly six hours without a single problem, and during that time I was able to get all my personal information off of it.
Now, in the past I was quite adamant about not taking apart my iBook when it's the responsibility of Apple to fix this issue, but today I finally broke down and took it apart.  I figured I may as well, it was just a $1100 paperweight as it was.  But as I type this on my wife's MacBook (which we bought to replace her iBook), I have her previously dead iBook up and running with a shim placed on top of the graphics chip.  I'm currently loading Panther from the Restore Disk because I wanted to give it a clean re-install, but it hasn't given me a single problem yet.
I still very much feel it's Apple's responsibility to fix this problem, but I'm not holding my breath, and at least now I have a working (for how long?) iBook.

YouTube loads black screen for first five seconds

Starting early January 2013 in Firefox, YouTube videos are loaded as blank black screens for the first five seconds. At the 0:06 mark, videos start playing normally. This is not an issue in Chrome or IE. Tested with all plug-ins and add-ons disabled (except Flash player). Plug-ins/add-ons updated. Tried re-installing Firefox with no solution. Help? Thanks!

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Why do I get a black screen in front row when watching some iTunes store purchases? esp Cars 2

We bought Cars 2 a few months ago from the iTunes store. The movie won't work in Front Row, we only get a black screen (except for the blue Front Row controls at the bottom) although the audio comes through just fine. The annoying part is all of our other iTunes store movies work fine in Front Row. Just Cars 2 is broken. I don't think that it is an authorisation problem because it plays okay in iTunes, Quicktime, even via airplay to an appleTV or via Home Sharing to our iPad.
The movie is only standard definition so I am guessing that it is not an HDCP issue; I understand that there is only HDCP on HD movies. We are playing it on a Mac Mini (core 2 duo) on a Sony Bravia via a VGA connector.
After a little bit of complaining, apple let us download the movie again in case the file was corrupted, but unfortunately the same problem with the new version.
The computer did have Perian installed at one point, but uninstalling and restarting made no difference.
I have found lots of reports of movies with missing picture in Front Row but these are all ripped videos, never with an iTunes Store purchase.
Apple won't refund our money as the purchase was more than 60 days ago by the time I gave up troubleshooting and reported the problem.

Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back

Computer loads black screen installing Windows 7 / 8

Hello,
I have installed Windows 7 on my machine several times without any problems. After updating to Mountain Lion however my computer will always hang at a black screen when it is time to run the Windows installer.
I have tried this with Windows 8 and experience the same issue.
Any ideas / help would be very appreciated
Thank you so much
Joseph

bump

I am using an iphone 3Gs and Itunes won't allow me to restore it?!?! help me fix my black screen of death!

Ok, I am trying to restore my iPhone 3Gs to 5.0.1 and when I do, it looks like it is going well until it says that is it preparing to restore, it keeps me stuck at that spinning bar and then after a while it gives me the error 1601 unknown error has occurred. I have tried looking on Google for over 3 hours now trying to find the answer to my problem and sadly I cant find one, I am trying to restore my IPhone because earlier I was playing with it and it ran out of battery and I let it change and walked away form it, I came back 1 hour later and it was still at the boot logo of apple, I waited 2 hours and it did nothing, just stayed with the boot logo. I then put it into DFU mode and it appears in iTunes as in DFU mode and can be restored but like I said above that it just gives me an error. I have looked into Google and tried every way possible and found out that I may have the black screen of death. If you have this problem and found a way other than getting a new iPhone, please contact me on this page because I am not in the mood to buy a new iPhone because this one has an expired warranty.
Also i have tryed all the things in the error support page and nothing works, uninstalled itunes completely and did all that other stuff but still the same problem and i have not found a way to fix this.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

[SOLVED] X11 Fails to load, black screen

alright, just so everyone knows im a linux noob.
ive just install arch after many hours of work, configured everything, made sure hal was running ect
when i do startx, it just goes to a blank screen.
ive made sure im using the right drivers, and that xterm is the only active DE in .xinitrc
suggestions?
Last edited by supaflyx3 (2010-05-02 20:54:39)

How old is your computer? About 5yo or more? I think your card is quite old and may not work with the recent drivers. Unfortunately the old drivers (xf86-video-intel-legacy) don't work w/ the new xorg so you (and I for that matter, as I have an old intel card too) are pretty much f***ed.
I can get my computer to run, but it will freeze 20 times a day so it's no fun. That's why I stick w/ the old drivers and the old xorg and I'm fine :-)
> xterm is the only active DE in .xinitrc
Can you post your .xinitrc? I think xterm should run ...
> im not getting any errors, just a blank black screen.
OK, what about the logs? 'grep EE /var/log/Xorg.0.log' will show the errors.
How did you configure xorg, do you have xorg.conf?

PLEASE HELP!!! Black Screen with white curser at startup...

at startup after grey screen fan turns on and screen turns black with a white curser in the upper left. Then one line of text shows saying something to do with single user mode failed with a bunch of other text. (sorry I didn't write it down) It then vanishes for a minute with just the white curser remaining and repeats.
Ran hardware test... everything OK
I have repaired permissions which took almost an hour of CD.
I tried repairing disk failed " Invalid Key Length, volume check failed" twice.
I am currently running os off external backup HD.
I tried doing a archive and install but said I could not because the my os software(10.4.11) was newer than my original CD (10.4), is that correct?
I do not know what to do? Please help!!!!

You will need to reinstall OS X, but you cannot do an Archive and Install until you repair the drive. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Videos app loads black screen

Now whenever I load the Videos app the screen turns black, I left it for a few minutes and still black, I restarted the device and still have the same issue. Worked well before even after the iOS 4.2 update. I'll try to restore when I get home from work.
Anybody else having this issue?

Okay connecting the ipad to my machine I removed all the "Movies" from the device, after that the Videos app would open. I then began to re-sync each video (all mp4) to the device one at a time.
All the video is back on the device and the app seems to work now. Not sure what caused the issue.

Help! Acer Aspire9410 Black Screen

I will try to be brief.....here is my problem. Over the weekend I took this laptop to my local BestBuy to upgrade
my memory from 1GB to 4GB. The Geek Squad installed (2) Kingston PC2-5300 2GB DDR2. All has been well until today;
I logged online this morning and nothing!! The Acer logo screen appears than the screen goes to black, no clicks, beeps nothing.
I tried to get a safe mode screen by holding the F8 button and the boot screen does not appear. I turnoff and repeatedly
pressed the F8 button to get the safe mode screen to appear nothing. The only screens that will appear are the F2-Setup
and the F12-Setup Utility screen. Could the Ram Cards be defective? Or am I having a hard drive issue?
Thanks!!!

Usually on the first screen that comes up in the BIOS, you can see the type of memory modules installed and the amount of ram installed. If the memory bank installed in is blank or some other dubious number chances are its not compatible.
Also, removing the memory from yoru Laptop is easier then you think, you just remove the panel where the memory is installed, remove the added memory off the clip and close the cover and restart the computer to see if the memory is bad or not.
As for the BIOS if you are just checking for reported memory, you can exit and discard the saved changes because nothing really has changed.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

CP5 - W7 - Movie not loaded - Black Screen

Hi all Captivaters,
For the first time in my life I experienced this problem.
A caprivate priview/publish can not load its own swf.
A totally normal project, among several other projects with the same settings as all projects I have can not suddenly load?
I searched the forum, but could not find any other captivater with the same problem.
I am willing to send my project to captivate "central" support if they want to investigate, and are happy for all tips I can get.
Below is what I can se if I preview (F12) or publish to a LMS or publish to desktop or publish as an EXE (Media).
Some settings that I think could be valuable to know.
Setting 1
Setting 2
Thank you in Advanced
// Daniel

Aktually, this seams to be a bigger issue than a single project!
All my projects are black, and I wonder if it has to do with the latest Adobe AIR update....
everything worked fie yesterday, and at the afternoon we both said yes to the prompted install.
Are there any known updates or bugs that creates this problem?
// Daniel

Help!GT780DX got black screen after flashing vbios

i tried to unlock 570M and flashed video bios in Windows(using vflash) but when i restart my laptop, it turn black and cannot boot OS
i really need help now

Seems you bricked the vga with wrongly flashing a vbios not intended for your system. Guess you have to send it to MSI for a at the owner's expense repair.
>>How to contact MSI.<<

Help needed iPhone 3gs Black Screen/Crashing iTunes.

Good afternoon!
So my problem is rather annoying. Last night my phone was on my night stand. I woke up and it was not responding. I thought it was dead so I set on the computer to charge. Itunes wouldn't open. So I disconnected the phone, and started iTunes on its own. Once that was up I replugged in my phone. It's crashing the program. What worst is that my computer brings up the window asking about the pictures, etc like it does for any other camera. Still..no picture on the screen. Does anyone have any tips? I've tried the holding both buttons for 4 seconds, then releasing the sleep/power while holding the square for 10 more seconds and nothing. I love my iphone, but this is rediculous and my only phone.

Reset the phone if you haven't already - press both the home and on/off buttons for at least 10 seconds until the Apple logo appears.
If no go, the phone has hardware damage and can't be fixed with any troublshooting-software methods.

HT201401 iPhone 4S rear camera black screen but front facing camera perfectly fine and freezing updated to iOS 7.0.4

iPhone 4S brought couple of years ago, no apple warranty or AppleCare and since updating to iOS 7.0.4 there has been trouble with the rear facing camera, i dont want to go to apple store because i know that they will be like "You have to pay £200" and for me that is alot of money, now i didnt know if anyone else has the same issue as i know alot of other people are, and apple however isnt listening and needs to fix this immediately or they will lose customers.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Help me!!! SWFLoader loads black screen in front of Flashpaper2

Similar Messages

Maybe you are looking for