Help: my process priority of 'ora_pmon_sid' is decreased to 0 by OS!

Hi, I see this is a group about Linux, but it seems its the most appropriate forum to post my problem.
My world is composed of Unixware7 and Oracle 8.1.5 and some processes of my owner application.
Everything is OK after my application started, but several hours later, the prioriy of process 'ora_pmon_sid' is decreased to 0(I found out using ps -ef|grep ora_), while all other processes seems alright and my application runs on.
To my best knowledge, OS will decrease a process's priority if only it occupied too many resources. I have no idea what it is doing now, anyone help me?
No warnings, no errors, the %idle of CPU remains 50%.

You should look at the Windows Event Log for errors / reasons.
Probably (this is a guess), you ran out of space for the Paging file.

Similar Messages

Help: my process priority is decreased to zero by OS?

Hi, I see this is a group about Linux, but it seems its the most appropriate forum to post my problem.
My world is composed of Unixware7 and Oracle 8.1.5 and some processes of my owner application.
Everything is OK after my application started, but several hours later, the prioriy of process 'ora_pmon_sid' is decreased to 0(I found out using ps -ef|grep ora_), while all other processes seems alright and my application runs on.
To my best knowledge, OS will decrease a process's priority if only it occupied too many resources. I have no idea what it is doing now, anyone help me?
No warnings, no errors, the %idle of CPU remains 50%.

Hi
On linux, priority goes from -20 (highest priority) to 20 (lower priority) so a priority of 0 is not bad ;)
Most UNIX do this, so first check the priority system under your UNIX, and get the highest/lower value...
Anyway if CPU is 50% the machine is working fine, is not hanged.....
A10!
PS: How many simultaneous connections to the database and machine did you have?

Help for Process Priority (STOP buttons)

I , I have a problem with my program.
I make the acquisition with a device connected to GPIB.
I want to have my main program with 2 For Loop and a stop button which stop the program and the device.
The problem is that, if the program is doing an acquisition and is in a For loop, I can press stop button and nothing happens until the end of the for loop.
I can stop with main stop red button but my device is not Off.
I tried an event structure but it don’t works.
The goal is to have a stop process priority to the acquisition process.
I attached my structure of program. I only need to keep the 2 For Loop.
Event structure and while Loop can be removed.
I use LV2012 sp1f5 but I can upgrade to LV2014 if really necessary
thanks in advance for your help.
Solved!
Go to Solution.
Attachments:
priority_process_LV2012.vi ‏16 KB
Capture.JPG ‏114 KB

Rigth click on the border of the loop you want to leave and add the conditional terminal.
Place the Stop button inside the loop.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Display array contents & prompt user for process priority

Hi, i need help developing an interface.
I have an array which contains a complete list of models available at my company. Now, i want to create an interface where the contents are displayed and user is able enter numbers to select the models he/she wants to run and the process priority.
eg: The array contains models A to Z. The user is able to select models D, A, G and B and instruct the program to process them at the same sequence.
How do i acheive this in Labview?
I'm very poor at designing interface, can someone point me to any literature and tutorials in developing frontpanel interface in Labview?
Thank you.

Hey, I have done something similar to this in the past. The way I did it was by using a listbox. I had buttons that the user would select to tell me what to do and how to modify the listbox contents. For example, in your case, I would have an Edit button. When the user selects the Model and hits Edit, I would pop up a screen asking him which process he would like to assign to the model. Then I would check for errors and if none existed, I would update the listbox contents with the new information.
Let me know if this helps or if I should provide more explantation.
Thanks!
Dan
Daniel Eaton
National Instruments
Systems Engineering
Embedded and Industrial Control

How can I change the default process priority for plugin-container?

I'm on Windows XP and using Firefox 16.0.2.
While browsing the web I often listen to pandora, but the music playback is always choppy or jerky. It especially occurs when scrolling pages up/down on other tabs. I saw on another question - https://support.mozilla.org/en-US/questions/930496 - that one solution is to change the plugin-container.exe priority to AboveNormal. I've done this several times and it works really well!!
I also tried changing the firefox.exe priority up and down, but this is ineffective (choppy playback problem still occurs). It is very much related to the plugin-container priority.
Please could you provide an about:config option to set the default process priority for the plugin-container. It would make a big difference for those users who have the problem. Thanks!

thanks
i also found solution for my poblem:
i have this code:
jMenuItem jMnItEdit;
jMnItEdit.setAccelerator( KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_ENTER, 0));
also i had ActionListener bounded to this JMenuItem
but Ialso had in form JTable and it always grabbed my VK_ENTER event and that menu item wasn't working at all
but when i overrode that input map for JTable and set
tableInputMap.put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0, false), "none");
everything started to work perfectly,
thanks a lot

Can I setup process priority on WebLogic?

Hi,
I try to find out if WebLogic provides any process priority features ?
Using JMS message property field is one way. Are there any other
alternatives?
Chris

Not yet. We do not allow prioritization of given services. This is
something we plan to add in a future release.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Chris Chen" <[email protected]> wrote in message
news:3a71152e$[email protected]..
Hi,
I try to find out if WebLogic provides any process priority features ?
Using JMS message property field is one way. Are there any other
alternatives?
Chris

Err:Help- Parellel processing of delivery generation is active*

Hi
I got this while creating a delivery in VL10.
"Wait for next parellel processing , wait for all 1 parell processing session or return to the list by selecting cancel "
in another pop box, Help- Parellel processing of delivery generation is active
If any one familiar with this error , pls help me to understand what could be the reason and what I need to do for fixing it pls .....
Thanks In Advance

Jaya,
On your User Role Tab, try setting the Max number of tasks to zero. Depending on your config, this field may not be locked. Otherwise, try finding a Role/Scenario combination which presets this field to zero.
Try setting 'List of blocked documents' to blank.
Try setting 'list type' to '2'
Try deselecting 'Selected items' checkbox.
This is not goof-proof, VL10 sometimes likes to fire off in parallel on its own. There are a host of OSS notes about this transaction, some of which talk about parallel processing. Check [OSS 399068|https://service.sap.com/sap/support/notes/399068] and related notes.
Also, check for any jobs running program RVV50R10S (this is VL10) in the background. If these are running parallel tasks, you may have to wait for them to finish before you can begin new parallel tasks.
Regards,
DB49

Keeping processing priority of Elements out of defaults

Dear Experts,
Can I keep my own custom processing priority of elements which will obviously be out of defaults. Will it have any negative affect?
Regards,
Muhammad Noman Shafique

Hi Muhammad,
You can have your own processing priority for the elements, as long as it is between the DEFAULT_HIGH_PRIORITY and DEFAULT_LOW_PRIORITY
Consider an example -
Bonus for each employee is based on a % of Basic Salary.
So your Bonus element's priority should be greater than Basic salary. Say 2005 for Bonus and 2000 from Basic Salary.
If some other element's processing is based on Bonus, its priority should be greater than 2005 but less than the default High Priority.
System will still allow you to have the priority outside the HIGH/LOW values, but the balances would not be populated in the correct order for payroll processing.
If there is a requirement to use an element to circumvent the balance, then you can have the priority outside the High/Low values.
Cheers,
Vignesh

How to discover/list 'NICE' process priority ???

I know how to change it.
How do you LIST them ?
TY

Ermanno Polli wrote:
orangekay wrote:
That's because you left out the "your favorite options" part. Try something like
LOL :-D
I thought he was more unix savy, judging by his request.
If he knows how to change the "niceness" of a process, he has to know how to list them.
Since nice is not in the standard listing, it could be normal to not remember the right option.
But he should have known how to use man, on the other hand..
Oh, well...
ps aux -O nice
Ciao,
Ermanno
Hey Ermanno, new friend...
*I DO Know how to use 'man'*.. - even said :"nor did *apropos display priority* & Variations... tho I Found 'Getpriority' which doesn't seem to be present:(
" {Anyone know why it isn't, BTW ??} - Generally, I find apropos about as useful as +<milk production spigots,4 letters>+ on a Bull...
{On the subject: does anyone now of a decent online help fast DB Tool for OS X /Darwin/BSD? -the type of programmers tool I used to use with CodeWorrier (sic) for system calls, syntax & similar when I was still programming...)
BUT, when someone responds with
ps -O nice
In answer to a question like mine.. You copy,paste and GO, don't you?
I Got results that looked right/reasonable. The Command looked right, HAD 'nice' in it, so I naturally assumed (wrongly,of course) that 'nice' was expected in the results (silly me ) and so posted back rather than going for man (gotta admit, man is often scarcely comprehensible -I think the system needs a SUPERman - more like 'Help - and more helpful than 'Help... man is more a 'memory jogger' than anything else IMNSHO
You're just trying to get outa admitting that it woulda been just as easy to have given me:
ps aux -O nice
:P
But thank you very kindly for the assistance.
+(Just FYI: wikip says "...A niceness of −20 is the highest priority and *19 is the lowest* priority. ...".+ Further: +"...Thus a process run with nice +15 will receive 1/4 of the CPU time allocated to a normal-priority process: (20-15)/(20-0)=1/4. *On the BSD 4.x scheduler, on the other hand, the ratio in the same example is about ten to one.....*"+ Wonder what it is on Mac/Darwin ...
I Gotta award the 'Solved' to someone...
I thank everyone - and wish this system would allow me to award more 'Helpful' points... seems unfair.
so: THANK YOU:-
orangekay
Courcoul
glsmith
- and even * 'I love my macbo...'* - for trying to help.
and,of course,
Ermanno
To whom,
Ciao...
Problem solved.

Needs help to process data from a form in php

Hello there,
Under "About us", is the contact us page where I would like
to collect data. But I could not get it processed.
I used but am very new to php. Anyhow, what I want to process
is to send all the data collected to my email address, and at the
same time, to display a simple Thank You page. I am attaching my
code.
I certainly HOPE someone can help me out as I have been
trying for quite a while now and need to get it done ASAP...
Many Thanks,
matt
Text

Hi Sayaf
It sounds like you need to use "Array Subset.vi" to split the 2000000 into 250000 element blocks.
Set the index on Array Subset to 0 and then increment by 250000 after processing and displaying each block.
Good luck
Neil

Urgent help regarding process chain error

hi experts ,,
one of the process chain is not running properly for last 5 days ....
now current status of process chain is red ...and msg is last delta isrunning/has errors ..couldnt process request
msg of yester days chain ........
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
error msg in bd87 (with idoc status 02 )
tried to process idoc manually but it didnt happen ...throughing same error....
one more thing here is same process chain status on 16th is in yellow status .....
its in yellow status at dtp load step ....on right click on dtp_load variant --->in batch montior --->job overview
dtp_laod job was is ready status ....
i thought this status effecting others so tried to schedule the job couldnt ....
so deleted job in confession....
now and process which is bfr dtp_load is in yellow and whole chain is in yellow ....
what shall i do now ??how to correct this ??
shall run dtp manually and dso activation manually ???and shall i make process into green status ???
or shall retrive deleted job wit basis ppl help???
please help me...
whoever helps me to fix this issue will rewarded wit full points and i will be greatful to them ...
Regars, \
Harry...

Yes, as rightly said you need to run the previous delta before updating new records in the latest request. If possible de-schedule the chains for a while, delete the old deltas (assuming you are using flexible updates?) and try to repeat the loads manually & proceed to activate & schedule once the delta has finished processing. If you still think this is an issue related to idocs processing, you can do the re-processing, provided they do not create fresh batch of idocs in the source system. You can re-process the idocs both inbound & out bound using reports like RBDAGAIN (But again, use extreme caution on these!). Please refer the #scn wiki on http://goo.gl/njVLS for more information on the idocs. For reprocessing please check this http://goo.gl/8aAcz. Thanks.

Urgent help for processing XML stream read from a JAR file

Hi, everyone,
Urgently need your help!
I am reading an XML config file from a jar file. It can print out the result well when I use the following code:
===============================================
InputStream is = getClass().getResourceAsStream("conf/config.xml");
BufferedReader br = new BufferedReader(new InputStreamReader(is));
String line;
while ((line = br.readLine()) != null) {
System.out.println(line); // It works fine here, which means that the inputstream is correct
// process the XML stream I read from above
NodeIterator ni = processXPath("//grid/gridinfo", is);
Below is the processXPath() function I have written:
public static NodeIterator processXPath(String xpath, InputStream byteStream) throws Exception {
// Set up a DOM tree to query.
InputSource in = new InputSource(byteStream);
DocumentBuilderFactory dfactory = DocumentBuilderFactory.newInstance();
dfactory.setNamespaceAware(true);
Document doc = dfactory.newDocumentBuilder().parse(in);
// Use the simple XPath API to select a nodeIterator.
System.out.println("Querying DOM using " + xpath);
NodeIterator ni = XPathAPI.selectNodeIterator(doc, xpath);
return ni;
It gives me so much errors:
org.xml.sax.SAXParseException: The root element is required in a well-formed doc
ument.
at org.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1213
at org.apache.xerces.framework.XMLDocumentScanner.reportFatalXMLError(XM
LDocumentScanner.java:570)
at org.apache.xerces.framework.XMLDocumentScanner$XMLDeclDispatcher.endO
fInput(XMLDocumentScanner.java:790)
at org.apache.xerces.framework.XMLDocumentScanner.endOfInput(XMLDocument
Scanner.java:418)
at org.apache.xerces.validators.common.XMLValidator.sendEndOfInputNotifi
cations(XMLValidator.java:712)
at org.apache.xerces.readers.DefaultEntityHandler.changeReaders(DefaultE
ntityHandler.java:1031)
at org.apache.xerces.readers.XMLEntityReader.changeReaders(XMLEntityRead
er.java:168)
at org.apache.xerces.readers.UTF8Reader.changeReaders(UTF8Reader.java:18
2)
at org.apache.xerces.readers.UTF8Reader.lookingAtChar(UTF8Reader.java:19
7)
at org.apache.xerces.framework.XMLDocumentScanner$XMLDeclDispatcher.disp
atch(XMLDocumentScanner.java:686)
at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentS
canner.java:381)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.
java:195)
at processXPath(Unknown Source)
Thank you very much!
Sincerely Yours
David

org.xml.sax.SAXParseException: The root element is required in a well-formed document.This often means that the parser can't find the document. You think it should be able to find the document because your test code could. However if your test code was not in the same package as your real (failing) code, your test is no good because getResourceAsStream("conf/config.xml") is looking for that file name relative to the package of the class that contains that line of code.
If your test code wasn't in any package, put a slash before the filename and see if that works.

Help with processing groups of records in database

Ok i'm at work right now trying to finish up a project for my class and what it is is a basic class to process an inner join sql statement generated table from access and order it by the student id in order to group each student together. I have written the sql statement and logic to access the database and return the array of row objects to the command line so i know it is grouping and returning info properly. I have written the conditional if statement to get the gradePoints for A = 4, B = 3, C = 2, D = 1, and F = 0 in a class method (KEEP IN MIND THE GENERATED TABLE CONSISTS OF SID, NAME, COURSE#, COURSETITLE, AND LETTERGRADE) now I just need to process each group of students individually and calculate their overall gpa's. Here in lies the problem. I imagine i need to define current student variables as like
currentID = s[0].getStudentID();
currentName = s[0].getStudentName();
then loop through the values of the array with something like
for(int j = 0; j < s; ++j)
if(s[j].getStudentID != currentID)
Process the grade records for the group Then reset the
current student to the next in line with another variable
assignment like
currentID = s[j].getStudentID();
currentName = s[j].getStudentName();
}(end of if)
Process the row object for the student created by this loop and then add it to the output string
} (end of for loop)
Ok so where i need help is the logic to process the grade records for the individual groups and then processing the row object. We haven't gone over anything like this in class and it is the last thing on my list to to do so any help would be appreciated. Also, if you think i'm an idiot keep it to yourself please it's not fun for people who really need help and really would like to know for future reference how to do something to be belittled. Thanks again
Matt
Message was edited by:
djmd02

sorry i guess is hopuld explain this better...I know
sql relatively well and the sql statement for my
query string is rediculously long with two inner
joins and what it returns is the sid, name,
coursenumber, coursename, and lettergrade So if you know SQL so well, why haven't you created a ViEW using this "ridiculously long" query and made your life easier?
Two inner joins? Nothing extraordinary about that.
this query
generated table is then used to populate an array of
objects for each entry in the table. They are already
put in order depending on sid by the sql statement
(for example)
11111 matt deClercq 3380 intro to java A
11111 matt deClercq 3382 database management A
11112 john doe 3380 intro to java A>
and so on. The problem i am having is within the for
loop to detect the end of each student and process
their grades for each class and calculate the gpa for
the whole group of grades that that student has.SQL is a declarative language, not procedural. If you're "looping", it suggests to me that you're pulling all that data into the middle tier and doing the calculation in Java.
I'm suggesting that there's a perfectly good way to do this calculation in SQL without using your ridiculous query. You might be better served if you try and figure out what that is.
Hope this makes things a little more clear and makes
me look a little bit more intelligent than i seemStop worrying about what people think and concentrate on your problem. You're a student. It's unlikely that you're going to appear to be on the level of Bill Joy at this point in your career. I'd be a lot more impressed if you'd stop whining about how people perceive you.
%

Help in Process Chains?

Hi Guru's,
I am new to Process chain topic.we have almost 60 PC's , My question is ,chain steps are START ->LOAD(clentnumber)->ACR->Abend program,this is flow of data in chain ,alternatively the chain was failes only on load step?As per my knowledge due to duplicats recordes loading .but i want permanent solution for this resason ,why it fails only on load step?
so plz could any body help on this.
Thanks&Regards,
Goodyear,

Hi Good year,
You are having problem with your data(duplicate records) thats why it is failing at loaing. Some times PC's fails at ACR(attribute change run), bcoz of ACR locking.
For more info..see the below links.. similar posts
Re: Master data load: Duplicate Records
Hope this Helps
Srini

Need help to process attachment data

Dear all,
I have the following use case.
1. I have one BPEL process which takes multipart MIME attachment with others parameters.
2. i have to save the attachment to the database through DBAdpter and do some business process.
My BPEL process taking attachment from standalone client and another BPEL process requester, All workings fine when the content-Id of the mime part is the physical address of the attachment file and the client and BPEL process in the same machine. By readFile() function i can get the file.
But if i will send file with content-id:<[email protected]> - certainly it's not working.
I would like to get any information how the Mime attachment works in BPEL process also how to retrieve the mime attachment from the SOAP message in BPEL.
I examine the samples and demos supplied with SOA suit but can't figured. My SOA suit is 10.1.3.1
Any help or suggestion will be welcome. Thank'x in advance.
Best Regards
Shamim

Is there also a way to set up the new Hard Drive so that my old programs will work again (GarageBand, iTunes' DRM-encoded mp4's that require the "original" signal, etc.) And how do I take off the second copy of OS X from my old hard drive before I get the disc image for a new hard drive?? Essentially, how do I set up the new drive so that it's like my original setup?

Help: my process priority of 'ora_pmon_sid' is decreased to 0 by OS!

Similar Messages

Maybe you are looking for