Help needed - app developed with 3.6, yet will not load - asking for 3.2 swz

Hi
I'm developing a flex 3 application
I recently uploaded an update to a test environment and bumped into a strage behaviour
the project started a while back and went through a number of versions of the sdk, namely 3.2, 3.5, 3.6
the project is clearly set for 3.6 now and I made sure both the framework swf & swz were uploaded to the same location of the index html page and the application swf.
for some wierd reason, when I test it on other computers, it displays the built in preloader, but fail to load the application,
this is because during the preloading phase the framework is not yet loaded and initialized.
when I checked the network monitor, it showd me a call to the 3.2 version of the flex framework, that could not be loaded
I've made sure again - a - that my project uses 3.6 sdk, and b - that all versions of the framework (3.2, 3.5, 3.6) are up on the server.
any Ideas on where I can go from here?
it would be really appreciated
cheers
Yariv

Hi and thank you for your comment
I've made sure all sdk's and dependencies in the project lead to the right location on the hard drive where the 3.6 SDK is located
it did not change anything
when I test it on other computers and check the network monitor
it still asks for 3.2 swz for an unknown reason
the thing is, even when I've uploaded 3.2 swz & swf to the server
the call for them is still returning a 404 not found...
this is really fastrating
any other ideas please?
thanks
Yariv

Similar Messages

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Firefox was my default, it went to boxes with statements,now it will not load,

Firefox stopped working yesterday for no reason, when I open the default page, all I get is 9 oblong boxes stacked one on top of the other with statements and a search button for each one, but nothing happens, which means I cannot access my computer via firefox.

Thanks for the input, but it still didn't work. I tried resetting, then I reinstalled the Photobucket App. It asked me to sign in, but when I attempt to go to "My Albums" at the bottom of the page, it just freezes when it says "Loading Albums". Just like it did before.
At least the camera still works. I'm about ready to take a picture of a target, set it up about 50 feet away and use this **** thing for the one thing it's good for, catching a bullet.
What really ****** me off was when I wanted to speak to a live Apple employee for help. $19 for help fixing what is obviously a problem with their "update"?!?! I'm totally convinced that Apple could care less about their customers. Sure, some people are not experiencing problems with iOS6, but from the posts here searching for help, it's clear Apple totally dropped the ball on this one.
Thanks Apple.

Weather Channel App will not Stop asking for Permission

Device = BB Torch 9810
Have installed/removed/re-installed Weather Channel App several times and it Constantly keeps asking for Permission (@ least 10 times a Day).
Solution Please?

Hi and welcome to the forums!
Some of these apps get pretty tricky, let's take it on!
You will need to turn your radio off, so pick a time when you can be close to the home phone.
Go click on the options icon>click on device> the scroll to Application Resource monitor turn it on
and let it shut down streaming apps as well. Save and exit. We just set the first trap!
No scroll up one to application management. Click to open and Under Applications select optional.
Now make sure the you delete every instance of the Weather Channel there may be a group of several. Save and exit and open your browser .click>options select clear browsing data. Clear everything cookies pushed content, download list cache, and history. Click the back button twice and leave the browser. Turn your a radios back on. Let's if our trap works and the app is pushing content to your phone.
Let me know how it goes!
Thanks,
Bifocals
T
urn your radios off while you
Blackbery 9810 User manual.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

If i restore an iPhone with iCloud already attach will it still ask for the sam iCloud already attached

i recieved an iphone 4 that was diasabled and i was wandering if i restore the iphone with the current icloud on it will it ask for the icloud after restoring

Yes.

Old FP-1000 app developed with LabVIEW 5.1.1, not running correctly since updating to MAX 4.5/FP6.0.2

I have an old application built under LabVIEW 5.1.1 which opens an .iak file (the file path is embedded in the app) and reads/writes to modules attached to an FP-1000. Recently I was forced to move the setup onto a new PC and now I'm unable to get the app to communicate with the FP hardware. The new PC has recent drivers installed (MAX 4.5, FP drivers 6.0.2). From MAX, I can open the .iak file and communicate with the FP hardware, so I'm unsure of where the problem lies. Are there version limitations with such old LabVIEW code and new FieldPoint drivers? Sorry, I haven't visited this setup for a long time (nor did I create it originally), so I'm a bit rusty on FieldPoint setups. Any guidance would be much appreciated - I'm trying to avoid having to redevelop the app.
Thanks,
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

Thanks, Chris, for replying.
I have every version of LabVIEW from 5.0 through 2009 beta available, though not presently installed. I was trying to avoid having to bring this app back into the development environment.
Since I posted last, I experimented and fixed the issue. I took a current copy of FPLVMgr.dll (version 6.0.0) and dropped it into the support directory for the app, replacing the old (3.0.0) DLL which was there. So, the answer to my question seems to be, an old LV executable can use a new FP DLL, and apparently must do so if the MAX/FP driver installation is updated.
Hope this info is useful to others.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

With 4.0 I can play Cafe World. With 9.0 it will not load. HELP!

Cafe World is a game on Facebook. Zynga says Mozilla 9.0 is not compatible with Cafe World. All my Cafe World friends had to downgrade back to 4.0 if they wanted to use Mozilla. I started using Google Chrome for a few months hoping it would be fixed soon. But then I gave up and downgraded to 4.0 so I could play the game on Mozilla because I like it better.

Start here.

1.42 Mac Mini with External Boot (HFS) will not Load Leopard

The Mac Mini will restart to start the loading from the DVD. The drive will spin up and will act like it is going to work then I get the wonderful "grey screen of death" telling me to power up the mac again. I have tried shutting down all other external drives but the one I need to install on. Even though I know the dive in the mini is bad I tried to run with only it and boot from the DVD and that didnt work either. Any help is greatly appreciated. I am not touching the MacBook till I see that this will work. Very dissappointed so far. Have never had an issue with upgrades from Apple before.
I have check my software update.. completely up to date. I have scoured the downloads for any firmware updates and the few I have found say I am not eligible for that update.

I disconnexted all drives and externals. Then tried again. That seemed to help. Have new issues which I am getting ready to post.

HELP!!!! My iTunes Library will not load...

So, I uninstalled the Safari tool, I never use it. I restarted my computer and now my iTunes library is empty. I try to import the library from my music folder, and I get an error that says "The file iTunes library.itl cannot be imported because it does not appear to be a valid exported file"
What the heck did I do? And is there any way to fix it? All of my playlists and podcasts and purchased music and TV shows are gone. !!!
Thanks in advance...

Did you have your library file iTunes Library.itl on the external drive?
If you did, you could try a shift key start - hold down the shift key while starting iTunes and you should be asked to choose a library. Navigate to the location of your library file on the external disk and choose iTunes Library.itl.
If you had your Library file in the iTunes folder on your c: drive, it has most likely been damaged and iTunes has created a new one.
There is a small possiblity that you can reacreate it from the xml file:
http://docs.info.apple.com/article.html?artnum=93313
Otherwise you just add your iTunes Music folder to iTunes with File>>Add folder to library. This loses all counts ratings and playlists.
Be sure you have the location of your iTunes Music folder correctly set in Edit>>Preferences>>Advanced>>General.

ITouch (4th Gen) will not load updates for the apps.

5 are stuck "installing" for days - fix?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Download the updates into your iTunes library and sync.
- Restore from backup
- Restore to factory settings/new iPod.

Images with www in URL will not load

Okay so suddenly Firefox has decided that it cannot read file URLs that contain the www prefix. This means http://timelesschaos.com/transferFiles/411tribalChallenge.gif will load fine, but http://www.timelesschaos.com/transferFiles/411tribalChallenge.gif will not load at all. To be clear, it was working perfectly fine two days ago. This also holds true for a multitude of websites, and is not isolated to any one. I don't think I changed any settings, and I just updated firefox to be sure. They also work fine in other browsers.
If I try to directly view the content I get this message
"File not found
Firefox can't find the file at http://www.timelesschaos.com/transferFiles/411tribalChallenge.gif."
Again, getting rid of the www makes it work perfectly.
== This happened ==
Every time Firefox opened
== Yesterday

Hello Anonymous,
follow these steps to unblock images:
*Go to Tools > Options. Click the '''Content''' tab.
*In the Content section, next to '''Load images automatically''', click the '''Exceptions''' button.
*Now, find the site you want to re-allow images for, click it and hit the '''Remove''' button
Other advice can be found in the [[Images or animations do not show]] article.
Kind regards,
Tobbi
Firefox Support Volunteer

My ipad 2, with IOS 7.1, will not load google maps.

The message I get is " There was a problem connecting to the network". My iPhone loads google maps on the same network.

Try resetting the iPad and then see if you can connect.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT4528 whenever i try to download a free app on Iphone 4, it asks for my password. It then returns to the"free" sign with a "+". It will not let me download apps. help!

Whenever i try to download a free app, I click, "free", It then breifly says "installing" before requesting my password. After i put in my password, it does not install, but instead now once again says "free" but sometimes with a small "+" sign. Please help!

There are a variety of acceptable forms of payment. If you don't want to use a credit card purchase and enter an iTunes gift card. You will not be charged for free apps but you do need to have an acceptable form of payment entered at this point.
http://support.apple.com/kb/HT5552

Need apps compatible with ios 4.2.1

need apps compatible with ios 4.2.1

To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

App developed with AIR 1.5 (or Flex 3 sdk) export to Tablet

I have an enterpise app maked with Adobe AIR 1.5, developed with Flex 3 SDK and halo components (MX not Spark).
I want to export this app to a tablet for my client (this app is very easy to use in a touch screen). But i supose that i have to rewrite all app in Flex Hero SDK (and export with AIR 2.6) and its hard.
Anyone has export an app developed with Air 1.5 or Flex 3 SDK to a tablet of android, blackberry or IOS with AdobeAIR 2.5 or 2.6?
Perhaps it could run in a tablet of Windows 7 but this tablets seems realy poor...
Thanks guys!

Anyone has an old app made in flex 3 or air 1.5 who wants to export an tablet?

Help needed - app developed with 3.6, yet will not load - asking for 3.2 swz

Similar Messages

Maybe you are looking for