Help needed-ESS/MSS for Travel Mgt

Hello People,
I have a scenario where the Trip request is either raised by employee or the supervisor on behalf of employee, which then goes for 3 levels of approval. Now when you execute transaction TRIP in R/3, sap creates a travel request and that goes for an approval to A002 /A012. Thus it gets approved.
Now I want to do the same thing in ESS/MSS. I know in ESS there is a standard Tab available for Travel. Can anyone help me with details of config to have employee raise trip request and that going to UWL of MSS or POWL of ESS where it gets approved. Also what are the possibilities to cover the whole scenario in ESS/MSS.
I am intending to do it in standard so Transaction IVIEW of TRIP is not desired by me. Urgent help is requested. Comprehensive guide for this config would be like a icing on a cake. Thx.Scenario steps is as below
1) employee or Supervisor of employee raises Trip request in ESS
2) It goes for 3 levels of approval either in POWL of ESS or UWL of MSS
3)Approved/Rejected.
4)Automails
Thx again

Dear Rajaram
You can have the WD
FITV_POWL_APPROVER
used in 2 ways:
1) reading the POWL data defined with personalization
To personalize that you will need to run this WD
FPB_DIALOG_COMP with App. ID: FITV_POWL_PERSONALIZATION
2) otherwise if you want to have FITV_POWL_APPROVER reading the trips from the inbox instead
you can enhance its feeder class
CL_FITV_POWL_TRIPS_TOBEAPPROVE
With 2nd option you can always create a workflow around BOR object: bus2089.
And in that workflow you can put your sending emails, etc...
Kind Regards
/Ricardo Quintas

Similar Messages

ESS, MSS for Finland

Dear All,
I have worked for ESS-MSS for an Indian Client, on all standard application provided by the SAP.
Can anybody help me to understand standard application provided by the SAP for the Finland, prerequisites, business packages etc.
Regards,
Priyanka

This is a vast question - in terms of all ESS and MSS
For say Personal Data in Webdynpro JAVA there is ess~fi* java applications delivered with SAP_ESS 600,603,633 for Personal Data infotypes that can be run using Business Package 1.4 or below
For say Personal Profile in Webdynpro ABAP there are DTL screens delivered for Finland for the personal data infotypes in EHP5 business switch
HCM_ESS_WDA_1 and ESS Business Package 1.51
There may also be additional localized ESS applications for Finland
Mostly though the rest of ESS/MSS is international and just needs to be adapted for use with your company

HELP NEEDED: ESS Sick Leave Workflow

Hi ESS/MSS Gurus,
Good day!
I am a newbie workflow consultant currently working on enabling ESS-MSS for a client. In summary, here are their requirements:
1. Leave Requests and Clock In/Out Corrections - Upon initiation of employee request, the work item is sent to the manager for approval. Regardless of the decision (either approve or reject), the employee will be notified via an email notification
2. Sick Leave Requests - upon initiation of employee request, the work item is sent to the company doctor for approval. Regardless of the decision (either approve or reject), both the employee and his/her immediate manager will be notified via an email notification
Here are some details regarding how I went about it:
1. Leave Requests and Clock In/Out Corrections - Created a copy of workflow WS12300111 and included send mail steps after TS12300097 (Approval Process) to notify the work item initiators.
2. Sick Leave Request - Created a copy of workflow WS12300111 and included send mail steps after TS12300097 (Approval Process). The approval process is pointed to the Position Company Doctor. After which a step was inserted after the approval process which uses a customized method (using FM SWX_GET_MANAGER) to determine the employee's manager. Then send mail steps are executed for the employee and the manager
3. Clock Corrections and Sick Leave/Leave Requests belong to the same Rule Group
During testing in our sandbox client I was able to successfully test all of the workflows. However, when I migrated the changes into our pseudo-QA system, I cannot launch the Sick Leave workflow from ESS. I encountered the following errors in PTARQ (standard leave request and clock in/out correction are ok):
1. Scenario 1: applied leave coincides with the working time of the employee
   "Document created with information: P2 848: Absence encompasses planned work time
2. Scenario 2: when only the total nmber of hours is entered for the applied sick leave date
   "No document created: HRTIM_ABS_REQ 094 Indentical clock times were adjusted, Check the entries"
3. Scenario 3: applied leavedoues not coincide with the working time
   "Document created with warning" HRTIM00BLPRETRO 001 Time entry triggers retroactive accounting in payroll"
For all cases, no work item was created in the back end.
I would like to tap unto your wealth of knowledge and experience on how to address such errors. I need to determine if this is a misstep in the workflow, HCM, or ESS/MSS configuration to better isolate the errors.
Your immediate response is highly appreciated.
Regards,

you dont need a custom WF first of all, You can directly use standard one cause we have a standard mail program
called rptarqemail
ie
The mails will be directly triggered to the mail address once you run rptarqemail.
Please check if you are running the report using the option since last
run. The procedure is usually this :
1. Create a Leave Request
2. Execute the report RPTARQEMAIL.
3. Approve the Leave Request.
4. Execute the report RPTARQPOST.
5. Execute the report RPTARQEMAIL.
Now to determine different approvers for different types of leave you can use the option of badi PT_GEN_REQ
IF_EX_PT_GEN_REQ~FIND_RESP_AND_DEFAULT_NEXT_PRC.
Method FIND_RESP_AND_DEFAULT_NEXT_PRC of badi
PT_GET_REQ might be utilised here.
Please have a look at the method
CL_PT_REQ_SEARCH_NEXT_P~SEARCH_NEXT_PROCESSOR.
If you are implementing the badi then make sure you copy all the methods
and implement the one, as mentioned.
also note that
Standard Leave request application offers the following options to
determine the Next agent. This specifies whether and how the next agent
of a leave request is to be determined.
Last Agent: The system reads from the database the last agent to have
had requests from this employee.
Line Manager: The system uses the organizational model to determine the
agent.
Last Agent, Then Line Manager: If no agent is entered in the database,
the system then uses the organizational model to determine the agent.
No Calculation/Manual Entry: The system does not determine a next agent.
Employees can enter an agent manually.
However if the customer has a different requirement, the BADI PT_GET_REQ
method FIND_RESP_AND_DEFAULT_NEXT_PRC is provided for this purpose.
the message you get is correct and its a information message which will not stop leave request, they depend upon customisation which can be hidden too
check here
http://wiki.sdn.sap.com/wiki/display/ERPHCM/LeaveRequestCustom+Messages

Help needed ESS and MSS

Hello All,
I am new to ESS/MSS development. Can anybody guide me how to start with the ESS and MSS activities.
What are the areas we need to concentrate when it comes to ESS/MSS.
how many sub-contents are there in ESS and MSS (like payroll, timesheet etc.,) ?
Any pdf's/doc's in this regards would be highly appreciated. Appreciate your time and valuable inputs.
Kind Regards,
Anil Kumar.

Are you asking strictly about ESS/MSS ...DEVELOPMENT....not CONFIGURATION? Two separate areas of focus.
In general, the information you will need will depend largely on the backend system you are supporting. ESS/MSS will have different capabilities/services available. If you just want general information, searching this site (using the search on the left panel over there) will provide you with lots of presentations and documents. Searching this forum itself will also yiled lots of general "what is ESS?MSS" or "how do I confgure ESS" kind of posts (since no one seems to ever search before posting up yet another "how do I configure" question). Finally...actually, the first place to look....check out help.sap.com (again, select your backend system and then locate the chapter(s) on ESS/MSS).

Need help on ESS/MSS BP's impact due to Upgrade from ECC 5 to ECC 6 EHP5

Hi,
We are upgrading from ECC 5.0 to ECC 6.0 EHP5 and EP 6.0 SP23 to EP 7.0 EHP2 {7.02}.
Right now the ESS/MSS BP's used in the Existing system (ECC 5.0 and EP 6.0) are given below.
sap.com BP_ERP4ESS 60.2 SP0 (1000.60.2.0.0.20050419020715)
sap.com BP_ERP4MSS 60.1 SP1 (1000.60.1.1.0.20080618080447)
i.e.
sap.com SAP_ESS 100 SP16 (1000.100.0.16.0.20090316001300)
sap.com SAP_MSS 100 SP20 (1000.100.0.20.0.20081013052238)
sap.com SAPPCUI_GP 100 SP20 (1000.100.0.20.0.20081013052239)
We want to run the same BP's in the New environment (ECC 6.0 EHP5 and EP 7.0 EHP2 {7.02}).
If anyone has idea on this, Please let me know is it possible or any modifications to be done ?
Please send me some documentation to get clear idea.
Thanks & Regards,
Ashok M.
Edited by: Ashok Kumar Munugoti on Oct 20, 2011 8:22 AM

Well i would recommend to use lates BP cause lot has changed from ECC 500 to ECC 600
and they wont be supported and you ll definately get support mismatch here
read here for compatibilty issues
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES

ESS/MSS for International Country grouping

Hi all,
Scenario: We are implementing Portal ESS/MSS on ECC6 and have loaded the Best Practices with the below components.
SAP NetWeaver Portal 7.0 SP12 with the following additional software components
     BP ERP05 Common Parts 1.0 SP08 (BP_ERP5COM)
     BP ERP05 ESS 1.0 SP08 (BP_ERP5ESS))
     BP ERP05 MSS 1.0 SP08 (BP_ERP5MSS)
     SAP ESS 600 SP08 (SAP_ESS)
     SAP MSS 600 SP08 (SAP_MSS)
     SAP PCUI_GP 600 SP08 (SAPPCUI_GP)
Now, the ESS and MSS is to be implemented for a Country Grouping 99 - International and not any specific country.
Problem: The iViews are not loading for International, when the R/3 config setting is for 99. While it seems to be calling the right iViews for 10 - USA or 12 - Belgium.
Can you please assist on how to link up the Users to the roles and correct iViews.
Thank you.
Sandeep

Hi Anil,
Steps in brief:
0. Once you have implemented the Busin. Packages from SAP you will get all the Portal Content which is country specific. This is the same content being called from R/3 using country specific resources.
1. Go to R/3 -> Pers Admin -> ESS -> General Settings -> Home Page for SS -> Services -> Define Country Srvcs.
Go into Define Country specific srvcs and you will see the view V_T7XSSSERSRVCG
2. This table contains all the country specific implementations offerred by SAP. You can use some of these and copy/create for CGrpng 99 as below. This should be based on what services you want to use on ESS.
EMPLOYEE_PERSINFO_ADDRESS         99    EMPLOYEE_ADDRESS_BE_SERVICE
EMPLOYEE_PERSINFO_ADDRESS05       99    EMPLOYEE_ADDRESS_BE_SERVICE05
EMPLOYEE_PERSINFO_BANK            99    EMPLOYEE_BANK_BE_SERVICE
EMPLOYEE_PERSINFO_BANK05          99    EMPLOYEE_BANK_BE_SERVICE05
EMPLOYEE_PERSINFO_FAMMEMBER       99    EMPLOYEE_FAMMEMBER_BE_SERVICE
EMPLOYEE_PERSINFO_FAMMEMBER05     99    EMPLOYEE_FAMMEMBER_BE_SERVICE05
3. Also make sure your CGrpng in Pers Area/ PSA is set to 99, basically Employee shold belong to 99.
Hope this helps in figuring out a few more things !!
Good luck
~ Sandeep

Help about ESS/MSS - Deploy error and landscape question

Hi.
I read a lot of post about this topic, but I continue something confuse about them.
I want to configure ESS and MSS.
My landscape is:
- J2EE 7.0 with Portal 7.0 (2004s) in a server A.
- ECC 5.0 ( with HR component SP05) in a server B.
Server B, has only stack Abap.
Server A is the latest version of Netweaver today. (stack j2ee and stack abap, BI, XI, Portal, etc)
I download and deploy in server A (J2EE 7.0), this components:
- BP ESS for erp2004
- BP MSS for erp2004
When I deploy the ESS BP, the deployment break raising this kind of error with the most of components, for example:

===========================================================================
Deployment started Tue Apr 10 12:01:57 ART 2007
===========================================================================
Starting Deployment of ess/au/addr
Aborted: development component 'ess/au/addr'/'sap.com'/'MAIN_xss04PAT_C'/'1178669'/'0', grouped by software component 'SAP_ESS'/'sap.com'/'MAIN_xss04PAT_C'/'1000.100.0.15.1.20070309085432''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/essauaddr.. Reason: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of ess/au/addr finished with Error (Duration 5187 ms)
Starting Deployment of SAP_ESS
Aborted: software component 'SAP_ESS'/'sap.com'/'MAIN_xss04PAT_C'/'1000.100.0.15.1.20070309085432''/'0':
Failed deployment of SDAs:
development component 'ess/au/addr'/'sap.com'/'MAIN_xss04PAT_C'/'1178669'/'0' : aborted
Please, look at error logs above for more information!
Deployment of SAP_ESS finished with Error (Duration 4781 ms)

Obviously, for this reason the most of iviews raise errors. A few of these works ok.
I assign role, and others configuration steps, this part I thinks that is OK
I configured the Jco, the role in Portal, the profile in ERP for ESS, etc.
My principal question is:
Can I use Portal 7.0 against ECC 5.0 in order tu use ESS/MSS based on webdynpro, without stack j2ee in ECC server (B) ?
Is necesary install J2ee stack in my server B ? or not?
Where I need to deploy the XSS 500 components ? in the J2EE 7.0 ?
Why when I deploy have this problem and the most of components cant deploy it?
For my landscape, which is the recommended setup ?
thanks in advance.!
Leandro.

My principal question is:
Can I use Portal 7.0 against ECC 5.0 in order tu use ESS/MSS based on webdynpro, without stack j2ee in ECC server (B) ?
You can use Portal 7.0 against ECC 5.0
Is necesary install J2ee stack in my server B ? or not?
You don't need to install J2EE stack on ECC system
Where I need to deploy the XSS 500 components ? in the J2EE 7.0 ?
Deploy XSS on Portal server not on ECC.
Why when I deploy have this problem and the most of components cant deploy it?
There won't be any issue. Go for ERP 2005
For my landscape, which is the recommended setup ?
As per the landscape mentioned by you, I will suggest go for ERP 2005 & XSS 600.
If you have further queries, mail me at [email protected]

Need Ess/Mss Workflow Scenarious tutorials ?

Friends,
Can u Send me the links for downloading the ESS / MSS workflow scenarios... I searched in the net and the forum i didnt get the correct link... Hope u guys ill help....

This describes a simple HCM Forms WF Scenario:
[url]http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/45/74f4abd6e74d7aaaa4cc02c81be7c5/frameset.htm[url]

ESS: Badi for Travel Services

Hi all,
I need to apply few check while travel services like Train, Outbound Flight, Inbound Flight, Car are filled up by employee, Please Suggest some BADI for travel services...

Hi,
Its not a transaction, its ESS service.

Help with ESS MSS documentation

Dear All,
please help me with the documentation on ESS MSS.
Thanks in advance
Regards
Minal

Hi,
Check this links:
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
Regards,
NR

Help needed from Adobe for unauthorised activity on my account

Help please!
I bought some education software from an Adobe supplier on the recommendation of my school. It turns out (without me knowing or being told when I placed the order) that I was being sold old software, at what he now claims was cost price (interesting as I subsequently bought the next version for just $30 more). I have not been able to register that software as it was the wrong version for my region, and after a month of trying I asked for a refund.
He is now accessing my account, (probably from a link in an email i sent him!!) and is trying to get the software he sold me registered so he doesn't have to refund me!
Okay, so bad enough that I have hassles with this "person" but worse that he has access to my account and I seem unable to change this.
This whole process has been a nightmare!! I need to close two open cases immediately but can't get hold of Adobe by phone or on chat!!! Help please!

You should be able to contact chat support from http://adobe.ly/yxj0t6

Help needed in BAPI for uploading data in FB01 - Urgent!!!

Hi,
    i need to post a document in FB01.
i am getting the following details from the user in a .CSV file.
Vendor no, vendor name, amount, document date, posting datem reference vendor line item text and Gl account line item text.
i am using BAPI BAPI_ACC_DOCUMENT_POST to post the document.
Now my req is if the amount is in negative then
   use posting key 31 against the vendor and 40 for GL account
if its positive amounts
use posting key of 24 against vendor and 50 against the GL account.
Now by default, when the amount is negative the function is working fine.
                but when its is positive its posting 21 against vendor and 50 against GL account. but i need 24 against vendor
can any one tel me, where should i pass these value in the BAPI?
or is there any other way of doing it?
Regards,
Niyaz

Hi,
the posting keys 31/21 (01/11 and 40/50) are hard coded and cannot be populated from the interface. This is because a different posting key could have a different posting logic from what is implemented in the BAPI.
So unless you want to do some modifications here, you have to use the fixed PKs. Pls. let me know if you are interested in where exactly the PKs are defined (hardcoded). I have this noticed for myself earlier but my notices are on another PC
Hope that helps, points welcome
Csaba

Help Needed: Automator Applescript for Folder Action - Encode Video

Hi !
I have created an Automator Applescript for a Folder Action to do the following:
When a new video file is moved to the target folder (i.e. Download of Vuze is done), automatically launch the Applescript Action that does the followin g(Applescripted):
1) Using "run shell script" and FFMPEG on a UNIX command line, determine Width/Height, Framerate, Bitrate
2) Calculate encoding parameters (slightly reduced bitrate, reduced Aspect etc.)
3) Using "run shell script" with ffmpeg on the command line and the calculated parameters to encode the video file
At the same time, the action is written to a log file so I know if a file is recognized, when encoding started etc.
It works fine if I save this Action as an .app, make an alias on the Desktop and drop video files on it.
It also works fine if I attach the script to a folder as a folder action and drag a video file in there.
However, when I attach the script as a folder action to the Vuze download folder, it encodes only some video files, i.e. if there was a download of 5 files, chances are good that it will not encode 1 or 2 files out of those 5.
If for example a second download finishes while the encoding for the first download is still going on, sometimes the second file starts encoding after the first encode finishes, sometimes it does not, the file does not make the log file at all, i.e. the folder action missed it or the automator action dropped it because it was still encoding. Still, sometimes it happens, sometimes not.
As I need a solution that is 100% accurate, I would like to ask if there are any ideas on how to do this better maybe? As I am not an Applescript Guru, I would need some help to know what works and what doesn't and what the syntax is.
My main idea right now:
Similar to how ffmpegX works with its "process" application, have a second script (as .app) that receives the files to be encoded from the automator action and puts them in a queue, then proceeds to encode this queue while the main automator action is free to receive the next file.
Writing this second app is quite straightforward (a modified version of my current script) but I have some questions I need help with:
1) How do I call another applescript from within an existing applescript that launches the new applescript in a new process?
2) How do I pass parameters to this new applescript?
3) In case of this "Queueing" Idea, once I called the external applescript the first time, how do I make sure when I call next time, that I don't open a second instance of this script but rather pass another queue item to the original instance to be processed?
Or in general: Is there a better way to achieve this automatic encoding solution that I have not thought about?
Alternatively:
Does anyone know how to call the "process" application that comes with the ffmpegX package with the correct parameters to use as a queueing / processing tool?
Thanks!
Joe
Message was edited by: Joe15000
Message was edited by: Joe15000

To do this, I created an Automator workflow with an Applescript snippet to change the 'media kind'.
Here is the 'Run Applescript' workflow step code:
on run {input, parameters}
          tell application "iTunes"
                    set video kind of (item 1 of input) to movie
          end tell
          return input
end run
Prior to this running, I have an 'Import Files into iTunes' workflow step.
You can switch out 'movie' with: 'TV show', 'music video', or anything in ITLibMediaItemMediaKind.
Good luck,
Glenn

Help needed with DisplayConfigX for Philips 32PW9551/12 CRT TV

Hi everyone,
I've been following this part of Apple Discussions closely for some time now, and I realise that I'm not the only one having trouble connecting my Mac Mini (Core Duo) to my TV. I'm hoping that BSteely or somebody else here could take a look at my specific problem. I'll try to provide as much relevant info as I can, if more input is needed, please specify.
Here goes :
TV model : Philips 32PW9551/12 That's a CRT, but with HDMI input. The manual says that it should accept 480p, 576p, 720p and 1080i.
Cable : DVI-HDMI
Using VNC over Airport when things go wrong, resetting back to the original resolutions.
Problem : can't get 720p resolution to work, only 640x480 fills screen. 640x480 is too low, since Remote Buddy's menu does not even fit on it.
When I select 1280x720 the image is on the left of the TV, leaving a wide black bar on the right and dropping a lot on the right. Other resolutions either don't work at all, are seriously overscanned (no dock, no menu) or are horrible to look at.
I've been fiddling with DisplayConfigX and SwitchResX, but I feel it's out of my league, so I'm not getting anywhere. I did export settings via SwitchResX, I hope that provides some insights.
Thank you very much in advance for helping me get my setup to work by creating a tailormade timing !
Kind regards,
Also Starring
Belgium
DDC block report generated by SwitchResX for display
PhilipsTV
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 41 0C 51 95 01 01 01 01
1 | 06 10 01 03 80 42 25 78 0A 0D C9 A0 57 47 98 27
2 | 12 48 4C 20 00 00 01 01 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 01 1D 80 D0 72 1C 16 20 10 2C
4 | 25 80 94 72 21 00 00 9E 01 1D 00 72 51 D0 1E 20
5 | 6E 28 55 00 94 72 21 00 00 1E 00 00 00 FD 00 31
6 | 3D 1C 2E 08 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 4C 30 36 48 44 20 76 31 20 31 36 3A 39 01 29
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........PHL
Product Code........20885 (5195) (9551)
Serial Number.......16843009
Manufactured........Week 6 of year 2006
Max H Size..........66 cm
Max V Size..........37 cm
Gamma...............2.20
DPMS Supported Features:
Display type:
RGB color display
Input signal & sync:
Digital
Color info:
Red x = 0.625 Green x = 0.280 Blue x = 0.155 White x = 0.283
Red y = 0.340 Green y = 0.595 Blue y = 0.070 White y = 0.298
Established Timings:
640 x 480 @ 60Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1920 x 540 @ 50Hz
H. Active...............1920 pixels
H. Blanking.............720 pixels
V. Active...............540 lines
V. Blanking.............22 lines
HSync Offset............528 pixels
HSync Pulse Width.......44 pixels
VSync Offset............2 lines
VSync Pulse Width.......5 lines
Pixel Clock.............74.25MHz
Horizontal freq.........28.12kHz
Vertical freq...........50.04Hz
H Image Size............660mm
V Image Size............370mm
H Border................0 pixels
V Border................0 lines
Interlaced
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #1 is Timing definition:
Mode = 1280 x 720 @ 60Hz
H. Active...............1280 pixels
H. Blanking.............370 pixels
V. Active...............720 lines
V. Blanking.............30 lines
HSync Offset............110 pixels
HSync Pulse Width.......40 pixels
VSync Offset............5 lines
VSync Pulse Width.......5 lines
Pixel Clock.............74.25MHz
Horizontal freq.........45.00kHz
Vertical freq...........60.00Hz
H Image Size............660mm
V Image Size............370mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......28-46 kHz
Vertical frequency range.........49-61 Hz
Maximum bandwidth unspecified
Descriptor #3 is Monitor name:
L06HD v1 16:9
Mini Intel Core Duo Mac OS X (10.4.8)

(1280x594 60Hz NTSC) gives fairly stable
image, big black border on
top, fallen off image on the left but right and
bottom seem ok.
You might want to run with that and see if you can dial it in better. SwitchRes X has arrows you can use in the right-hand side of the custom pane where you can try and center and size the image better.
Another thing. I don't seem to be able to enter the
pixel clock number exactly as you specify. It keeps
changing it slightly. Eg, after rebooting, it says
68,4 in SRX, even though I entered 69,75 before...
This is explained in the SRX documentation. When you make a request of the hardware that it somehow can't satisfy, it just tries to do the next closest thing. But you don't get and feedback of what the hardware can and cannot do. You only get unexpected results as you have mentioned.
And also, should the vertical scan rate not be
exactly 60 Hz ? Other numbers don't seem to be
accepted by the TV, but when making custom timings,
these scan rate numbers seem to be changing all the
time.
If you look at the EDID data you posted at the begining of this thread, towards the bottom it states that your TV will work from with any vertical frequency in the range of 49Hz to 61Hz. You don't need to use 60Hz but that is a standard. There is very little downside to deviating from that with and LCD display.

Help needed with connectors for Netbeans and Forte

Im using Forte for Java
my biggest obstacle is connecting sub j-frames to the main j-frame
i have created a main J-frame and sub j-frames in one package
in the Main J-frame there are buttons that you click to go to the next frame the same way "a-href" in HTML works in the same window and back
what my problem is how to declare the connectors for each button to go to the sub-frame
what code generators are required and the process and how to lable each sub-frame to be called
my project is a finance program
i.e
Main Frame
Menu:- ( TVM) ----------> button
(simple interest)-------> button
etc
when you click the (TVM) button
it should open the TVM frame (subframe in the same window)
this is my problem your help please this is a project which i have a deadline to meet ive done research through out but couldn't come across any useful or relevent material
this is a lot easier with pascal but Forte is a compulsory and java
if you want the screenshots ill post it thru mail just drop your adress and ill forward it
thank you

matt010385 wrote:
Thanks
I have already tried all of the things that site suggests, there is nothing wrong with the servers, or the service, I have tried all the work arounds that they suggest, but I still cannot get it to work.
Having a quick read i see from a link there that you might need to open ports(port forwarding).
Are you using a HH3, if so, I believe that it does have trouble with port forwarding, you can try a search here.
I am not into games as such, so will have to leave it for others to possibly help with some info.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Help needed-ESS/MSS for Travel Mgt

Similar Messages

Maybe you are looking for