Help needed for checkbox in module pool
Hi experts,
My requirement is i have 8 machines. i want to have a check box for each machine and when i select a specific machine by checking it, it should store data in my ztable as that specific machine name or it should show a flag or mark on each field selected inside my ztable.
I am confused in the logic to enter in my module pool program. please help.
see this :
Create CheckBox in Module pool and update the Databas once i hit the enter
Also please search before you post
Similar Messages
-
Calculator for addition using module pool
Hai all,
I going to create a calculator for addition using module pool .
i have set a screen 9001 and i placed a box and inside that i
placed 9 push buttons with the naming of 1,2,...9 as same as the normal calulator
then i have a "PLUS" push button which is used to add the 2 numbers and i have a "SUM" push button in 9001.
when i click the SUM push button it will call screen 9002 which have the input box for the result purpose.
can i do this or not??
i know it is little complicated but i need ur help..and also tell me can push button hold value or not??
thanks and regards,
pradeep.
Moderator Message: try it and find out for yourself.
Edited by: kishan P on Jan 19, 2011 4:18 PMHai maha,
Using i/o is very simpler one that i know but i need to create by using 9 push buttons.
thanks,
pradeep -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
F1 help on a field in module pool programming
I want to create f1 help on a field in module pool programming. How to use POH event. where should i write the help documentation. Before using this f1 help on a field i have to set some properties on GUI interface Editor. Please clearly mention the steps i have to follow.
PROCESS ON HELP-REQUEST.
FIELD P_LFA1 MODULE HELP_F1_LIFNR.
MODULE HELP_F1_LIFNR INPUT.
PERFORM SHOW_HELP_F1 USING 'ZFAG_DOC1'.
ENDMODULE. " help_f1_lifnr INPUT
FORM SHOW_HELP_F1 USING P_OBJECT.
Dati testo help
DATA: T_LINE LIKE TLINE OCCURS 0,
XHEAD LIKE THEAD,
HELP_INFO LIKE HELP_INFO,
TEXC LIKE SY-UCOMM OCCURS 0,
V_OBJECT LIKE DOKHL-OBJECT.
Costante
DATA: PREF_SIMG(4) VALUE 'SIMG',
DOCID_HY LIKE DOKHL-ID VALUE 'HY'.
Testo
CONCATENATE PREF_SIMG P_OBJECT INTO V_OBJECT.
Estrazione testo
CALL FUNCTION 'DOCU_GET_FOR_F1HELP'
EXPORTING
ID = DOCID_HY
LANGU = SY-LANGU
OBJECT = V_OBJECT
IMPORTING
HEAD = XHEAD
TABLES
LINE = T_LINE
EXCEPTIONS
RET_CODE = 1
OTHERS = 2.
CASE SY-SUBRC .
WHEN 0.
Visualizzazione testo
GET CURSOR FIELD HELP_INFO-DYNPROFLD.
HELP_INFO-DOCUID = DOCID_HY.
HELP_INFO-DOCUOBJECT = V_OBJECT.
HELP_INFO-SPRAS = SY-LANGU.
HELP_INFO-PROGRAM = SY-REPID.
HELP_INFO-DYNPRO = SY-DYNNR.
HELP_INFO-DYNPPROG = SY-REPID.
HELP_INFO-PFKEY = SY-PFKEY.
HELP_INFO-FIELDNAME = HELP_INFO-DYNPROFLD.
CALL FUNCTION 'HELP_DOCULINES_SHOW'
EXPORTING
HELP_INFOS = HELP_INFO
OVERLAY_HEADER = XHEAD
TABLES
EXCLUDEFUN = TEXC
HELPLINES = T_LINE.
WHEN OTHERS. MESSAGE S720(SH).
ENDCASE.
ENDFORM. " SHOW_HELP_F1 -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Search help for date in module pool
Hi experts
i am developing a module pool prog, in the second screen 6 fields are displayed and one of them is date field. I wanna search help for that date field. Plz note the date field is populated from Work area of iternal table.
Plz help me out in solving the issue.
Thanks and Regards,
AlsonHi
We have a lot of Example programs in SAP, have a look at the demo program
<b>DEMO_DYNPRO_F4_HELP_MODULE</b>..
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards
Sudheer -
Help in uploading image using module pool programming!!!
hi all
I need a help from you all...iam designing my company's Visitors Identity card...im workin in module pool programming,i need to know wat function module should i use to get jpg image n to display it...
i hav tried it using DP_PUBLISH_WWW_URL func module but it asks for OBJID dono wat should i give...i referred SAP_PICTURE_DEMO.....
<b>plz suggest me with some solutions to diplay image which is stored in desktop....</b>
asha.......hi,
u try this importing jpeg image in transcation oaor .
in that give class name as pictures and class type as ot and execute it.
in that u import which image u want to say for suppose a DUMMY.
FORM TOP_OF_PAGE. "#EC CALLED
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
<b>I_LOGO = 'DUMMY'</b>
"'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGE
this top of page u use in FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = gc_pf_status_set
I_CALLBACK_USER_COMMAND = GC_USER_COMMAND
<b> I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'</b>
this may solve ur problem. -
Tutorial for Screen programming & Module-Pool programming
Hi Experts,
I have no previous knowledge of Screen programming & Module-pool programming.
Please provide me good tutorials on those so that I can master those in a couple of days as I need to use those in my current assignment.
I require those badly.
Rewards assured.
Thanks.
Anirban.
Moderator message: please do not ask for documents or tutorials, search for available information, do not use terms that assign a higher priority to your issue compared to all others, do not promise rewards.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 15, 2010 2:14 PMhai guru,
use abapdocu----- tcode give ur keyword and search it.
or
sap technical .
search in sap sdn ok.
thanks.
anji -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
Guidelines for setting Application Module Pool Size Parameters?
Are there guidelines for setting the application module pool size parameters, such as initial pool size, maximum pool size, etc., based on the expected number of users or other factors? I've read the developer guide sections (ch 28-29), but still don't have a good feel for how to correctly set the optimal values for the pool configuration parameters? Even more importanty, how do I monitor the pool's efficiency during runtime to determine if the pooling parameters are configured correctly?
This will be critical to performance and scalability, so I'm looking for a way to get some visibility into how the pooling is working during production operation to assess whether there are bottlenecks/constraints/ineffeciencies?
Note I am using Tomcat as the java runtime container; ADF BC / JSF jdev 10.1.3.1
Thanks in advance and Merry Christmas!KUBA - were you able to resolve these issues and if so are there any lessons learned you can share?
I'm hoping someone from the ADF team can answer our original question including guidelines for setting pool parameters and how to monitor the pool's performance while running in production.
thanks -
Help Needed for T42 Start-up Problem
Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Need some assistance in module pool progarming
i got my first requirement please guide me from where i should start.
To post Production Order confirmation in a module pool program having functionality of
showing list of orders as well as changing and displaying production order confirmation
Moderator message: "spec dumping", please work yourself first on your requirement, these forums cannot replace training courses.
Edited by: Thomas Zloch on Feb 7, 2012Hi Forum,
Thanks for your suggestions. This is the actual query. It is working fine and what I want is to write it in a format of sub-query where it will increase the perofrmance as I am using this queryi n JSP code to pull the data onto the web form.
The OR and AND conditions are mapped correctly as per our business logic I can cobmined ( 5,6,7,8,910) with (12). This condition TAB1.QM_JOB_STATUS IN (5, 6, 7, 8, 9, 10)) is different from (QM_JOB_STATUS in (12) and QMI.QM_CLOSE_DATE >= SYSDATE - INTERVAL '6' MONTH)
Suggest me what I have to do to increase the performance of the query. We are usign a flat database.
select select "TAB1"."JOB_NUM" as "JOB_NUM",
"TAB1"."TITLE" as "TITLE",
"TAB1"."REP" as "REP",
"TAB1"."GOOD" as "GOOD",
"TAB1"."CODE" as "CODE",
"TAB2"."QN_JOB_GPH_FILE" as "QN_JOB_GPH_FILE",
"TAB3"."STA_CODE" as "STA_CODE",
"TAB3"."JI_DESC" as "JI_DESC",
"TAB1"."QM_USER_STATUS" as "QM_USER_STATUS",
"TAB4"."RR_NAME" as "RR_NAME"
from "TAB3" "TAB3",
"TAB4" "TAB4",
"TAB2" "TAB2",
"TAB1" "TAB1"
where (TAB1.JOB_STATUS IN (5, 6, 7, 8, 9, 10)) or (JOB_STATUS in (12) and TAB1.QM_CLOSE_DATE >= SYSDATE - INTERVAL '6' MONTH)
and "TAB1"."JOB_NUM"="TAB2"."QN_JOB_NUM"
and "TAB1"."REP"="TAB4"."RR_REP"
and "TAB3"."STA_CODE"="TAB1"."QM_USER_STATUS"
Cheers,
Krishna.
Maybe you are looking for
-
I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and a
-
Users from an external organization authenticating to a Remote Dekstop App
Hi, We have set up Remote Desktop Apps using Remote Desktop Services The apps are permissioned with AD user accounts in our forest When an external company that has network access (i.e. routable addresses) tries to log in (with credentials in our AD)
-
REP-9: A fatal error occured: in the toolkit.
Ok, so I just installed a fresh install of Forms and Reports 11.1.2.0.0 and applied the most recent patch for it like I've been doing to the other servers in my environments. This one is the only one that gives me errors when I try to run a report. H
-
I can't hear the person I'm talking with but he can loudly hear me
My FaceTime isn't working properly. When I'm talking to my friend, he could loudly hear me but in my itouch, I can't hear him even when I'm on my earphones or not. I could hardly hear him.
-
Hi...I have created a VIEW, currently I am using static values for some comparisons but now I need to get these values from a variable, is it possible for me to make use of a implicit cursor to get these values..if not is there any other way to do so