Help needed in downloading int table

Hi All,
I have to download an internal table into an Excel file in directory "c:\...." using file name: UPLD_YYMMDD_#, where # changes if more than 1 file
is run on any date. Ex: UPLD_080222_1, UPLD_080222_2, etc.
How can i do this with different file nos changing?
Thanks in advance.

You could use this FM TMP_GUI_GET_FILE_EXIST to check if the file exists...Otherwise, you assign a different number...
Greetings,
Blag.

Similar Messages

Argent help needed! Downloaded app doesn't show in...

Need help! I downloaded Six-Guns into my newly bought NOKIA Lumia 720, but it doesn't show up in the App List, so I cannot play it nor uninstall it. Still it takes more than 800 MB and only left around 400 MB in my internal storage!!! An argent assistance is needed!!!

Yes, it's under the Game.
It can be better if the game also shows up in App List for my convenience.
Cheers,
Winston

Help needed XML to Internal table and vice versa

Hello frnds, I need to convert Internal table to XML and Vice versa.
Now I am able to most of the part except for this...
the xml which I have to generate looks something like this...
- <trade_dt>
- <![CDATA[ 20111108000000:20111108235959
]]>
</trade_dt>
its a range I think
And then the reponse which I get back the XML is like
- <lockinfo>
- <![CDATA[
TRD_HEADER     1045     1          2
ACT_CASHFLOW     1042               1
TRD_TERM     1045               2
]]>
</lockinfo>
Is there any provision in class cl_ixml or class if_ixml_element to handle this part.....
Edited by: Amit Sawant on Dec 28, 2011 3:51 PM

Hello Amit,
I would suggest you, to use the XSL-Transformations, which can be inbound used in ABAP.
For example:
DATA:
l_xml       TYPE string,
lt_flights TYPE TABLE OF SFLIGHT.
SELECT * FROM SFLIGHT INTO TABLE LT_FLIGHT.
CALL TRANSFORMATION id
SOURCE DATA = lt_flights
RESULT XML l_xml.
Now, you have a XML-String which is in the ABAP-XML Notation, which means, that ABAP can move this XML-Data back into an internal table/structure.
For the backward, you have to use the following statement:
CALL TRANSFORMATION id
SOURCE XML l_xml
RESULT DATA = lt_flights.
As you will see, it is very easy. The Transformation "id" is just one example and build in. When you have to transform the data, or do not want to have the ASX-Notation in it, you should at least define your own transformations with the transaction XSLT_TOOL and use it similar to the transformation "id".
Kind Regards,
Hendrik

Help needed for downloading the image from Inage URL

Hello everyone,
I need some help regarding setting a timeout for dowloading image from image URL
Actually I have a hash table with set of image URL's...
for example:
http://z.about.com/d/politicalhumor/1/0/-/6/clinton_portrait.jpg
which gives a image.
for(Enumeration e = google_image_links.elements() ; e.hasMoreElements() ;) {
                                  //System.out.println("final");
                                   //System.out.println(e.nextElement());
                                   try{
                                        System.out.println("Images download started....");
                                        //System.out.println(e.nextElement());
          //imageio is the BufferedImagereader object
                                           imageio = ImageIO.read(new URL((String) e.nextElement()));
                                        image_title = created_imagepath +"\\"+ array_words[i] + counter_image_download + "." + "jpg";
                                        img = ImageIO.write(imageio,"jpg", new File(image_title));
                                        imageio.flush();
                                   }catch(Exception e1){
                                        System.out.print(e1);
                                   if(img){
                                        System.out.println("The image " + image_title + " has been saved to local disk succesfully.");
                                   counter_image_download++;
                              }//end of for loopi am using the above code to download all the image from the Image URL's that r present in hashtable.
The problem i have been encountered with is...
Some URL's does not return any bytes, The code is not totally broken. In such cases, my code is hanging off at that particular URL and waiting to get some output data from the URL. The execution does not proceed furthur But if the URL is a totally broken link, the code is throwing an exception and I am able to handle it successfully.
But in the case of partially broken links, I am not able to go furthur because the code keeps waiting to get some data.
So for this reason I want to setup a timer and tell the code to wait for 5-10 min, in that time if it does not get any data, proceed furthur to download other links...
Please tell me how can I do this.. or plzzz tell me an alternative...
Please help me ans its a bit urgent plzzzz.
Thank you,
chaitanya

Hello everyone,
I need some help regarding setting a timeout for dowloading image from image URL
Actually I have a hash table with set of image URL's...
for example:
http://z.about.com/d/politicalhumor/1/0/-/6/clinton_portrait.jpg
which gives a image.
for(Enumeration e = google_image_links.elements() ; e.hasMoreElements() ;) {
                                  //System.out.println("final");
                                   //System.out.println(e.nextElement());
                                   try{
                                        System.out.println("Images download started....");
                                        //System.out.println(e.nextElement());
          //imageio is the BufferedImagereader object
                                           imageio = ImageIO.read(new URL((String) e.nextElement()));
                                        image_title = created_imagepath +"\\"+ array_words[i] + counter_image_download + "." + "jpg";
                                        img = ImageIO.write(imageio,"jpg", new File(image_title));
                                        imageio.flush();
                                   }catch(Exception e1){
                                        System.out.print(e1);
                                   if(img){
                                        System.out.println("The image " + image_title + " has been saved to local disk succesfully.");
                                   counter_image_download++;
                              }//end of for loopi am using the above code to download all the image from the Image URL's that r present in hashtable.
The problem i have been encountered with is...
Some URL's does not return any bytes, The code is not totally broken. In such cases, my code is hanging off at that particular URL and waiting to get some output data from the URL. The execution does not proceed furthur But if the URL is a totally broken link, the code is throwing an exception and I am able to handle it successfully.
But in the case of partially broken links, I am not able to go furthur because the code keeps waiting to get some data.
So for this reason I want to setup a timer and tell the code to wait for 5-10 min, in that time if it does not get any data, proceed furthur to download other links...
Please tell me how can I do this.. or plzzz tell me an alternative...
Please help me ans its a bit urgent plzzzz.
Thank you,
chaitanya

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Help needed in creating a table that updates itself at runtime.

I am working on creating a sniffer in java and need a GUI that will show the incoming packets as they are sniffed. How can I use tables such that they automatically update as and when the packets arrive.
Any help on this matter would be appreciated thanks
hasrar

Hello, I am working in a Sniffer in java too, but I have not information about this.
I want to tell you if you can send me some information or examples.

Download int table into csv file with each column in separate column in csv

Hi All,
I want to download the data in internal table to CSV file. but each column in the table should come as separate column in csv format.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = GD_FILE
      FILETYPE                = 'ASC'
      WRITE_FIELD_SEPARATOR   = 'X'
    tables
      DATA_TAB                = I_LINES_NEW
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC NE 0.
    WRITE: 'Error ', SY-SUBRC, 'returned from GUI_DOWNLOAD SAP OUTBOUND'.
    SKIP.
ENDIF.
with the above values passd , I am getting csv file but all the columns in one column separated by some square symbol.
How to separate them into different columns.
Thanks in advance
rgds,
Madhuri

Below example might help you understand on dowloading CSV file:
TYPE-POOLS: truxs.
DATA: i_t001 TYPE STANDARD TABLE OF t001,
      i_data TYPE truxs_t_text_data.
SELECT * FROM t001 INTO TABLE i_t001 UP TO 20 ROWS.
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
    i_field_seperator          = ','
*   I_LINE_HEADER              =
*   I_FILENAME                 =
*   I_APPL_KEEP                = ' '
TABLES
    i_tab_sap_data             = i_t001
CHANGING
   i_tab_converted_data       = i_data
EXCEPTIONS
   conversion_failed          = 1
   OTHERS                     = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: file TYPE string VALUE 'C:\testing.csv'.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = file
CHANGING
    data_tab                = i_data[]
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    not_supported_by_gui    = 22
    error_no_gui            = 23
    OTHERS                  = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Eswar

Help needed for report on tables vbak and vbap

Hello,
I needed help in one of my work issues, this is my first project and Iam still learning. kindly help.
I was asked to take erdat,vbeln,posnr from selection screen and compare it with the data already in tables vbap,vbak. If the data
already exists and exception needs to be raised saying that the 'data exists',but if the data is not present in the tables the
tables have to be updated. This has to be done using function module only.
Then I have to write a REPORT calling the above function module and finally displaying the number of records updated and the
list of them.
I have started writing a function module:
FUNCTION z_tableupdate.
""Local Interface:
*" IMPORTING
*"     VALUE(DATE) LIKE VBAK-ERDAT DEFAULT SY-DATUM
*"     VALUE(SALESORDERNO) LIKE VBAK-VBELN
*"     VALUE(ITEMNO) LIKE VBAP-POSNR
*" EXPORTING
*"     VALUE(EX_VBAP) LIKE VBAP STRUCTURE VBAP
*"     VALUE(SYS) LIKE SY-SYSID
*"     VALUE(EX_VBAK) LIKE VBAK STRUCTURE VBAK
*" EXCEPTIONS
*"      DATA_UPDATED
*"      DATA_EXISTS
SELECT * FROM vbak INTO vbak_wa WHERE erdat = date
                                    AND vbeln = salesorderno.
ENDSELECT.
SELECT * FROM vbap INTO vbap_wa WHERE posnr = itemno.
ENDSELECT.
IF sy-subrc EQ 0.
    ex_vbap = vbap_wa.
    ex_vbak = vbak_wa.
ELSE.
    RAISE data_exists.
ENDIF.
sys = sy-sysid.
ENDFUNCTION.
How is the above code for function module, will this work??
Now can I write a report to call the above function module and update the record?? if so, how to update ??? please help...Lots of thanks in advance.

Hi
Welcome to SDN forum
Whay can't you write a simple report in SE38.
why you are using Fun module
Nothing wrong in it.
But first become perfetc in reports in SE38 and then do using the fun modules
write a simple select statement like
SELECT AVBELN AERDAT BPOSNR BMATNR
INTO TABLE ITAB
FROM VBAK AS A JOIN VBAP ON
AVBELN = BVBELN
WHERE A~VBELN IN S_VBELN AND
             A~ERDAT IN S_ERDAT AND
             B~POSNR IN S_POSNR.
IF SY-SUBRC <> O.
WRITE: / 'No data found'.
ENDIF.
First write this in SE38 by defining a proper selection screen and internal tables
then do as fun module
see the doc for fun module
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards
Anji

Help needed to download

over a year ago i downloaded the student creative suite to my macbook pro that i still currently use. i needed newer versions of all of the programs so i bought the creative suite cloud. since i am no longer a student i created a new adobe account using my most current email, etc. i just tried to start downloading the new programs but when it asks for my adobe log in information i type in my new account info and it says it is invalid. is this because my old adobe programs and my old adobe account is still linked to my computer? i have no idea how to fix this problem- any help would be appreciated. thanks!

Hi behappy14,
Could you please let me know where you are trying to Log in. is it Adobe.com or Adobe Application Manager.
Regards,

Help needed with comparing two tables

Hi
I have two tables which have same column names but different entries in each one of them and some common entries between the two tables.
Table A has all the entries of Table B and some extra ones.. and I need SQL to give me those extra ones that are not in Table B
Table A columns names (col1, col2 col3 ...) and data
col1 col2 col3 col4 col5 col6
a1 a2 a3 a4 a5 a6
b1 b2 b3 b4 b5 b6
c1 c2 c3 c4 c5 c6
d1 d2 d3 d4 d5 d6
All columns are varchar2
Table B columns names ( col1,col2 ..) and data
col1 col2 col3 col4 col5 col6
a1 a2 a3 a4 a5 a6
c1 c2 c3 c4 c5 c6
All columns are varchar2
So the answer I would like to get is
b1 b2 b3 b4 b5 b6
d1 d2 d3 d4 d5 d6
because these two entries are not in Table B but in Table A
Appreciate if you can help me with this because I have millions of records that I need sort through and get the entries and cannot be done manually..
Thanks in Advance
Kris

Here is an example:
SELECT 'X' FROM DUAL UNION SELECT 'Y' FROM DUAL
MINUS
SELECT 'X' FROM DUAL;
Y

Help needed to download JRMC 3 - as JRMC 4 is not processing JRA files

Is there a way to download older versions of JRMC (for example JRMC 3)?
I am running our Weblogic 10 server on JRockit R27.3.1. We are now trying to analyze and tune the server performance. I have downloaded the JRMC 4.1 version available at Oracle Downloads. But, this JRMC 4.1 version does not support JRA parsing, it seems. And JRockit does not allow JRMC 4.1 Flight recording .
I know that Flight recording will be available from JRockit R28, but I cannot upgrade JRockit now. Hence I need JRMC 3 to analyze the JRA files. Please help if you have faced this situation.
Thanks,
Shankar.

Hi,
Yes you can download to the older version from MOS.
externally you dont have such option.
Regards,
Kal

Help - need to download previous Dreamweaver

I am in school and they use Dreamweaver 5.5. I downloaded Creative Cloud with the understanding that I would be able to retrieve Dreamweaver 5.5, but have been unable to find it or figure out how. Any clues out there???

Deerduke wrote:
Question- can I download and install 12, which is what my school is teaching, and get rid of 13? All on the same account? I am not sure of the process.
I have a student CC membership, and was doing fine until DW updated to 13 and I lost 1/3 of my options, having to waste precious time finding workarounds, since Adobe has provided no reasoning or input for the changes. I rather liked 12
You can have both installed under the same subscription.
Is your school teaching DWCS5.5 (version 11.5) as you mention in your original post, DWCS6 Disk version (version 12.0x) or DWCS6 Cloud (version 12.1x)?
All of them have some pretty big differences and are significantly different from DWCC (at least in menu options).
Check the versions by going to Help > About Dreamweaver.
DWCS6 Cloud (version 12.1x) is a totally separate program from DWCC (version 13.x) and doesn't get upgraded to 13 automatically by any kind of update. If you are suddenly using DWCC, look in your Program Files (x86) folder for a Dreamweaver CS6 folder. They can both be installed at the same time, they just won't run at the same time, so you might already have the program you're looking for installed.
There is also a fair amount of info in the Adobe blog giving the reasoning for the major changes to the program. Basically it boils down to internet standards and modernizing the program to fit what professional designers and coders need to produce to fit those standards.

Help needed with conditions in Table View

Another question regarding the dashboard we are building:
We use a custom function module to display marketing attributes for a particular customer. There are three kinds of marketing attributes of which we want to display the value:
- Z_QUADRANT
- Z_SOW
- Z_WALLET
If I use the function module as a data service in Visual Composer and use a standard table view as ouput, we get these kind of output:
Atnam - Atwrt - Atflv - Atzhl (<-- these are the column labels)
Z_QUADRANT - 4 - 0 - 0
Z_SOW - 0 - 5 - 0
Z_WALLET - 0 - 75.000 - 0
I just want to display the data as follows:
QUADRANT: 4
SOW: 5%
WALLET: 75.000
So I need to hide the obsolete fields and values and just need to display the relevant values. How can I achieve this? I was guessing I needed to implement some sort of conditional formula like "IF atnam = Z_QUADRANT, display Atwrt(value)" or something, but I am terrible at these kind of things. Can somebody explain it to me or point in the right direction of some good documentation or guide on this? Thanks in advance!
Best regards,
Jan Laros

I now chose to use a form which uses the output from the tables. This is the table I use as input for the form:
http://tweakers.net/ext/f/DWmYaePz4gdzVhwMJ3naA5UQ/full.jpg
I use the following formula for the quadrant:
IF(@ATNAM=="EU_BP_NPS_QUADRANT",@ATWRT,"0")
This returns a value of "4" which is correct.
For SOW I use the following formula:
IF(@ATNAM=="EU_BP_NPS_SOW",@ATFLV,"WRONG")
Strangely enough the return value is "WRONG" in the form. What am I missing here?
Regards,
Jan

Help needed to download app to ipad2

I have tried to download some apps to my ipad and the icons still have 'waiting' under them about 18 hours later! I have never had this problem before but have just updated the OS. Any ideas?

John...
Try resetting > Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
Then follow the instructions for re downloading apps > Downloading past purchases from the App Store, iBookstore, and iTunes Store
If resetting doesn't help, try resetting the network settings.
Tap Settings > General > Reset > Reset Network Settings
Then try downloading again.

Imac G4 question - help needed regarding downloading

Help! My wife and I both use our G4 a lot - she teaches 2nd grade so you can imagine how much she uses it. (If it matters, we use 10.3.9) Here in a nutshell is the problem. For some reason we are not able to download any type of files. This just started out of the blue. The download box opens up - the desired file shows up - then it will say "Cannot create file" When you try to reload the file, the same thing happens. We still have over 9 Gig of space on the hard drive. I looked at preferences and did not see anyting that might work. Any ideas would be greatly appreciated. THANKS!

Hello and Welcome to Apple Discussions.
Well this is new on me but I'm going to suggest that you 'Repair Permissions' it's possible the underlying OS X file permissions have become corrupt preventing you from saving these files.
Go to: Macintosh HD > Applications > Utilities > Disk Utility. Click Macintosh HD on the left hand pane and then click the 'Repair Permissions' button just right off centre at the bottom of the window.
I'd also suggest re-starting the computer (some ppl never do) and this can cure many faults.
regards
mrtotes

Help needed in downloading int table

Similar Messages

Maybe you are looking for