Help needed in drivers of dso7450a setting mode= auto
Hello
I need help regarding the setting of option mode=auto in menu of mode coupling button of Agilent DSO 7450A & Quick Measure button how to use these two options can any one help me out .
Thanks in advance
Ali
There is no such thing as a 7450 so I'm going to assume that you really meant 7054.
It seems that is the TRIGWEAUT | NOR) command as documented on page 464 of the programming manual. I cannot find a function that allows you to set that - perhaps because the driver was originally written for a different model. The _ag6000a Default Instrument Setup.vi does set the sweep to normal. You can easily add a function that allows you to change between auto sweep and normal sweep. When you are done, be sure to post the finished function so that others can use it.
I did not try to find the Quick Measure function but I will tell what I did to find the information about the sweep. First I looked in the operators manual for a description of the scope front panel command. Then I looked in the programming manual for the command that did what the button performed. When I found the command, I opened the VI Tree and did a text search for both 'AUT' and 'SWE'. I looked through all of the VIs that had the text and found none that implemented the command.
Message Edited by Dennis Knutson on 03-28-2009 11:38 AM
Similar Messages
-
Help needed in XML Bursting to set printer details
Hi,
In xml bursting to set the printer details, we need to Specify the printer attribute as a URI such as:"ipp://myprintserver:631/printers/printername"
Here I am getting printername dynamically from report. But I am
not understanding "ipp://myprintserver:631/printers". Here What I have to give?
Please help me in this.
Thanks in advance.Which environment are you trying this in ? In Enterprise server, bursting is defined by a SQL query which can be run against the table that you want. So you can even populate the printer name from your query. So the URI, ipp://myprintserver:631/printers/printername" is the syntax. In your case you have to create this string in your SQL query by concatenating the parts "ipp://" + printername + ":631/". If there is a name to the printer in the printserver, then that too can be concatenated.
In case this is in EBS , the same has to be done in the control file. -
Help need on ALV Get focus & set Hot Key
Hi Expert,
In my project, I am working extensively in WDP ALV component. My have some tropical requirement in this project.
1. Get the reference of the particular box of a ALV table. There is some set-focus functionality, but there is nothing called get focus. Do any one have any ides, how can I get the reference of the particular selected box ( cell ) from a ALV table.
2. Is it possible to set Hot key in the WDP component? For a example, if I click that hot key, it will trigger some action.
It will be an great help, if any one can provide any idea on this.
Thanks in advance,
Regards,
Satrajit.Hi Satrajit,
For hot keys..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b951297a6d2d65e10000000a42189c/content.htm
You want to do on perticular cell.. this helps.
http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/45/12093591152464e10000000a1553f7/content.htm
http://wiki.sdn.sap.com/wiki/display/WDABAP/HowtotriggertheeventON_CELL_ACTIONin+ALV
OR based on attribute you can do any actions..
for example :..
DATA lt_table_settings TYPE REF TO if_salv_wd_table_settings.
DATA lt_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA lt_columns TYPE salv_wd_t_column_ref.
DATA ls_columns TYPE salv_wd_s_column_ref.
DATA lv_column TYPE REF TO cl_salv_wd_column.
lt_columns = lt_column_settings->get_columns( ).
*** To change and set Column Header Text ***
LOOP AT lt_columns INTO ls_columns.
lv_column = ls_columns-r_column.
CASE ls_columns-id.
WHEN 'DEALER '. // your attribute name
// your action...
ENDCASE.
ENDLOOP.
Cheers,
Kris. -
Ipod Mini Help - Need Idiot's Guide to Set Up
Help! I got an ipod mini for Xmas from my boyfriend. He loaded 500 songs onto my ipod from his ibook. However as we've split up I haven't really used it but I'm going travelling for a year (this weekend-nothing like being prepared...!) and would like to take it with me and set up play lists etc.
I haven't even connected my ipod to my laptop as I've heard that when you connect to it/itunes that yr ipod contents can be wiped if you are already registered with another PC/Mac. So basically I don't know what order I have do stuff so that I can get some tunes I like rather than listening to ex-boyf's taste in music.
Hope this makes sense - never posted on this before and am a bit of a technophobe.
Packard Bell Easy Note Lap Top Windows XP
Packard Bell Easy Note Lap Top Windows XPHi,
Welcome to Apple Discussions
I believe you want to manually sync your iPod. You might want to look at the following:
Knowledge Base Document #61148 on Managing songs manually on iPod
Knowledge Base Document #61675 on Using iPod with Multiple Computers
iPod 101
Jon -
HELP: Need clear, simple guide to setting up two WAC120
I need a clear, simple guide to setting up two WAC120 Access Points.
I have purchased two WAC120 units.
I live in a 4 story home. I have put the...I want to boost the WiFi signal in my house. I have a WN203 AP. I have found the manual on line but, can't seem to make sense out of it. Does anyone...
-
Help need for drivers on windows server 2003
Hi there....... I just have a request to you....... I am having Lenovo 3000 N 200. Recently I installed Windows server 2003 on My D Drive..... But what the problem is some drivers I installed but I cant find some drivers like VGA Drivers, Vedio Drivers,PCI Device like...... could you please let me know where can i download these drivers........... ( some of the xp drivers are compatible with server 2003 and some ot them are not...)
Thankin you,,,
Desparado..............Hi there....... I just have a request to you....... I am having Lenovo 3000 N 200. Recently I installed Windows server 2003 on My D Drive..... But what the problem is some drivers I installed but I cant find some drivers like VGA Drivers, Vedio Drivers,PCI Device like...... could you please let me know where can i download these drivers........... ( some of the xp drivers are compatible with server 2003 and some ot them are not...)
Thankin you,,,
Desparado.............. -
WDS Set up - Help Needed! Airport Extreme with one Relay and one remote
Hi Guys,
I need a bit of help. I am feeling quite stupid and frustrated. I am having some difficulty with setting up a WDS network with:
Base station: Airport extreme (current version)
Relay: Airport Express (current version)
Remote: Airport Express (current version)
I start by cold resetting the three units. The Base station is connected via Ethernet. The setup I wish to get going is a simple base - relay - remote.
I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit (12 character and numeric string). At this stage I am only adding the intended Relay unit and Remote units MAC number.
Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n). I make sure the base has "allow this network to be extended" ticked. Under Radio Channel selection I edit it to reference channel 1 for 2.4Ghz (5 Ghz leave as Auto). I am careful when setting up the Relay and remote to match the Radio Channel. (Although I tired many channels as I thought maybe interference was a factor and denying the fact its obviously my set up skills as a factor).
Question 2: Do you need to disable Guest networks? I would think it does not matter as I have tired turning it off and has not made any difference.
Under Access Control I leave as default, Not enabled.
Next I hit update and and error message comes up. WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up. So I ignore and can get to the stage where the base unit is working and green light with an internet connection.
I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airpot Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
Question 3. Do I need to add the Relay's own MAC number to its own setup? This seems doubtful as with the base station but tired with and without for good measure with no success.
The 2.4Ghz channels are all set to 1. Radio mode set to Auto. Although even when I try to manually set them to all identical it doesn't seem t help.
Then the problems begin. The base unit is Green and the Relay and Remote say they are not connected to the internet. I assume since I have not seen a WDS Error message then the units are set up correctly or as I ignored it on the base unit. But when click unignore the error seems to work itself out.
Question 4. I need help to understand why I have no internet. The remote / relay says something about no IP number and I don't really understand what I should do? Do I need to go back the Airport Utility Manager and start messing about with the TCP/IP, DHCP, NAT ? The base is set up PPPoE and the relay and remote are set to Bridge.
It is really puzzling me why the relay and remote flash amber with error messages related to the IP number? I have tried turning off the base station and router and then on again but no joy.
Can anyone please enlighten me or give me a few ideas? I am doing something very obviously stupid and I guess the fix is something simple that I have overlooked.
I did spend the time and go through the threads and search online, So I am not trying to waste anyone's time I referenced the two links to get a second opinion:
http://broadcast.oreilly.com/2009/03/taming-an-airport-express-wds.html
http://www.macobserver.com/tmo/article/settingup_an_airport_relay_with_airportexpress/
Any help much appreciated!Versed wrote:
I need a bit of help.
Welcome to Apple's discussion groups.
My WDS experience is limited to "main" and "remote" configurations (no "relay"), so I'm not posting from direct experience, but below is what I think would work in your case.
I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit
I don't think the "main" unit needs to be told about the "remote" unit, only about the "relay" unit.
Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
You'd never enter the MAC address of a unit into its own configuration, if that's what you mean. I also don't think that you'd need to enter the MAC address of the main into the remote and conversely.
I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n).
Five things have to match in a WDS configuration: network name, encryption type, network password, band, and channel.
I make sure the base has "allow this network to be extended" ticked.
I don't think that's important for a WDS configuration.
Question 2: Do you need to disable Guest networks?
I wouldn't think that matters.
Under Access Control I leave as default, Not enabled.
That's fine.
WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up.
Right.
I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airport Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
I think this should be the MAC address of the relay station, not that of the main station.
Question 3. Do I need to add the Relay's own MAC number to its own setup?
No. -
Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala -
ONKYO TX-SR805 Set-up Menu HELP Needed
This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know.
Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer. I will be hooking up 2 or 4 more speakers for the REAR.
Here are the settings on my TX-SR805 receiver on the set-up menu. I could use some help to see if they need set to something else.
2.2 Speaker Config
Subwoofer yes
Front 70Hz
Center 90Hz
LPF of LFE 80Hz THX
2.6 THX Audio Setup
THX subwoofer YES I don't know if mine is or not
BGC OFF Not sure what this BGC means
3. AUDIO ADJUST
3.1 Tone Control
Front Bass -1dB
Treble +1dB
Center Base +2dB
Treble +7db
Subwoofer Base +7
3.2 DIRECT
Delay Enable
DSD NO Not sure what DSD is
3.3 MULTIPLEX/MONO
Multiplex
Input CH Main/Sub
Mono
Input CH L+R
Output Speaker L/R
3.4 PLIIx/Neo:6
PLIIx Music (2ch input)
Panorama ON
Dimension +1
Center Width 3
Neo: 6 Music
Center Image 5
3.5 DOLBY EX
Dolby EX AUTO
3.6 THEATER-DIMENSIONAL
Listening Angle Narrow
3.7 LFE LEVEL
Dolby Digital -10dB
DTS -10dB
Multich PCM -10dB
Dolby True HD -10dB
DTS-HD Master Audio -10dB
DSD -10dB
4. SOURCE SETUP
CABLE/SAT
4.1 INTELLIVOLUME +4Db
.2 A/V SYNC 0 msec
.3 NAME EDIT Blank
5. LISTENING MODE PRESET
5.1 DVD
Analog/PCM NOT SURE WHAT TO SET HERE
Dolby Digital NOT SURE WHAT TO PUT HERE
NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
5.8 TUNER (ANALOG) Neural THX 5.1 is set on mine. Is this correct?
CD ?
6. MISCELLANEOUS
6. 1 VOLUME SETUP
Volume Display Relative
Muting Level -40dB
Maximum Volume +10dB
Power on Volume -22dB
Headphone Level +2dB
6.2 OSD SETUP
Immediate Display OFF
Monitor Type 16:9
Display Position TOP
7. HARDWARE SETUP
7.4 ANALOG MULTICH
Subwoofer Input Sensitivity 0
7.5 HDMI
ALL under here are ENABLE
Solved!
Go to Solution.I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
01-21-2010 08:24 AM
Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be. The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics. The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction. By the way NHT (Now Hear This) are excellent speakers. For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10. The sub base should be fine where it is.
Did your receiver come with an Audessy mic for calibration. I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
Your volume settings look fine again personal preference there is right or wrong.
For you listening mode Preset you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
I will have to make a second post since I can't go back and edit this one. -
Need help with installing drivers
I recently installed Windows 7 Professional and have been having trouble with installing the drivers necessary for sound, USB, graphics, etc. I have the Windows drivers on an external drive, but the OS won't recognize an external drive because it needs the drivers to do so. My Macbook came with OS X 10.6 installed, but I have since upgraded to 10.7 through the App Store. I believe I can use my 10.6 factory DVD to install drivers on the Windows side, but if I have 10.7 installed, will it work right? I'm confused
IME driver is one of the very most important. TPM is only needed if you plan on using it. If you don't know what it is, then probably don't need it.
Quote
Please tell me in detail what drivers do what functions and which ones need to install ?
Most of them are pretty self explanatory. Unless you set the SATA controller to AHCI mode when the OS was installed, RST isn't going to do much.
Like Henry said. Everything is on the install disc that came with the mainboard you need, including the ones you don't need. It's even got a 'total install' selection. -
HELP- Need to set up Elements 10 as external editor from LR3, but layers aren't available
Help! I am trying to set up Elements10 to open as external editor from LR3 but I must not be doing something right. When I "edit in" and select elements10 from LR3, it brings the photo up. However, none of the layers options are available. They are all grayed out. I need to be able to access layers. Help!!!! Anyone know what's going on?
You probably exported the photo to photoshop elements 10 as a 16 bits/channel file, so go to Image>Mode in photoshop elements 10
and click on 8 bits/channel so you can use layers.
more info:
http://www.texaschicksblogsandpics.com/elements-tutorial-bit-depth-why-cant-i-edit-this-ph oto/ -
Help needed in setting up Japanese Database
Hi there,
Help needed in setting up Japanese Database.
I created database with UTF8 character set on Sun Solaris O/S.
Oracle version 8.1.7.
I am accessing the DB through SQL*Plus (Windows client).
I downloaded the Japanese font on client side and also set the NLS_LANG environment variable to Japanese_Japan.UTF8. Still, I am not able to view Japanese characters. O/S on client side is Windows 2000 professional (English). Is O/S (client) need to be Japanese O/S? When I try to retrieve sysdate, its displaying in Japanese but not all characters in Japanese. Can anyone help me out how to set up the client and is there any parameters to be setup at server side? I also tried to insert japanese characters into table through client, but it displaying as "?????" characters. Any help in this regard is appreciated.
Thanks in advance,
-Shankarlol
your program is working just fine.
do you know what accept does? if not read below.
serversocket.accept() is where java stops and waits for a (client)socket to connect to it.
only after a socket has connected wil the program continue.
try putting the accept() in its own little thread and let it wait there while your program continues in another thread -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
If yes, have you tried unplugging and re-plugging both ends of the printer cable?
If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently? -
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them
Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers.
Maybe you are looking for
-
Hi, i'm trying to create a query that gives open qty. suppose in sales order line item 1 100 --delivered -50 -balance is 50 line item 2 200 -not delivered -balance is 200 i've tried creating query using table
-
Ipod nano - Error Message 'Win 32 is not a valid application'
Can anybody help ? I have just downloaded the itunes set up as instructed but get this error message. Is this something I have to do to the PC ?
-
1042N-A-K9 Default Username and Password
I just recieved in the mail an aironet 1042n ap. It was assigned an ip of 192.168.1.254 by my router. When I attempt to connect it prompts for a password and states the default username and password is admin and 1234. It will not except this, or Cics
-
Software iOS 6.0.1.failed update, Software iOS 6.0.1.failed update
Software iOS 6.0.1.failed update what to do next
-
Is drive genius 3 compatible with mountain lion
My mac keeps freezing and I would like to use drive genius 3. Is it compatible with Mountain Lion 10.8.2