Help needed please (Port forwarding/Firewall Question)

So im hooked up thru my router so if I want to play a game I have to port forward so im told.
Ok, I im at my port forwarding menu and its asking for the following info...some of this info I know and some I have no idea what it means or where I can get it from. Heres the parts im asked to enter that I have no idea what to enter......
Source IP Address:
Destination IP Address
Source Netmask:
Destination Port Map
Where do I find out these things!?...Im a COMPLETE novice when it comes to routers and im so confused.

Hello,
Unfortunately, that information is going to have to come from the people who are providing you the online game.
The settings you need are going to depend on what their program requires, and how they communicate with your computer.
All of this is different for each service you are trying to use.
Here are some articles to get you familiarized with the concept though:
http://en.wikipedia.org/wiki/Port_forwarding
http://forums.furthurnet.org/viewtopic.php?p=3821
http://www.boutell.com/newfaq/creating/forwardports.html
http://panasonic.co.jp/pcc/products/en/netwkcam/technic/port_fwrd.html
http://p2p.weblogsinc.com/2005/04/24/how-to-configure-your-router-to-allow-fast- bittorrent-downloads/
While they all discuss doing it with different routers, the principals and ideas are the same.
But, the actual configuration is going to depend on the specific needs of the service you are trying to use (the particular online game).
I hope this helps.

Similar Messages

  • Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

    Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

    Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

    ljm17 wrote:
    ...This keeps happening, everytime I do this type of update, I...
    Then you should know what you need to do... If you don't remember...
    See Here  >  http://support.apple.com/kb/HT1808

  • I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable")  and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
    I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
    If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
    iPhone 4s iOS 5.1.1 (9B206)
    Carrier AT&T 12.0
    Modem Firmware 2.0.12

  • PLEASE HELP!! port forwarding issues!

    hello guys,
    this is driving me absolutely crazy, i have read every forum out there and possibly watched every video and simply cant see what i'm doing wrong!
    i want to open the following ports to allow my DVR system for cameras to work:
    9000
    80
    60000
    37777
    i have followed all of the steps necessary but when i checked using a port checker tool, it said the ports are still closed?!?!?!?!?
    i read on a youtube video that the ports stay closed due to some sort of a security measure?
    speaking to customer services was no help either, the guy had no idea about what port forwarding is!

    this link may be of some help http://forumhelp.dyndns.info/networking/portforward.html
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Please Help - Only Some Port Forwards Working

    Hi all,
    I have the most annoying issue with a Cisco 887VA-K9 port forwarding. Some port work while other don’t and I just can’t see why, however I suspect it is a zone based firewall (ZBF) issue.
    Port forwards on the follow ports all work fine:
    External port 8021 to 192.168.4.253 on port 80 works
    External port 8022 to 192.168.4.253 on port 8022 works
    All the rest don’t. I also have SIP phones sitting outside the LAN which are unable to register through the internet with the PBX unit which is in the DMZ network 192.168.4..0
    Any help would be great appreciated as this sending me mad. Fully running config below.
    Louise ;-)
    Building configuration...
    Current configuration : 36870 bytes
    ! Last configuration change at 12:49:03 Magadan Fri Nov 8 2013 by cpadmin
    version 15.1
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname QQQ_ADSL_Gateway
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 6
    logging buffered 64000
    enable secret 4 gim.lMOdQK/21R4Wu.QJfOMAv3CIkRyN.hbSTG5xAxE
    aaa new-model
    aaa authentication login local_authen local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authorization exec local_author local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa session-id common
    memory-size iomem 10
    clock timezone Magadan 11 0
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-3471381936
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3471381936
    revocation-check none
    rsakeypair TP-self-signed-3471381936
    crypto pki trustpoint test_trustpoint_config_created_for_sdm
    subject-name [email protected]
    revocation-check crl
    crypto pki certificate chain TP-self-signed-3471381936
    certificate self-signed 01
      3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 33343731 33383139 3336301E 170D3132 30373132 31313332
      34375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 34373133
      38313933 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100AB76 5F7EE03F 306F52A0 91E82E04 7A69528D 1839409C 55BCC55A 47F180A9
      7B522E9B FBB96A32 715178FE B96B737E 788947A4 CF4791AA 15609E37 A3F66F07
      AD1B8A34 A2877711 E33A613D 8E50AE40 A106DE9C B2B03B95 73392ADB 4BB51FAD
      6F2D6F8D A90BA0B5 BD1A209C F54126A9 2E2FF5B7 85041B7E C72032C0 CECE7F79
      51550203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
      551D2304 18301680 141713AB B7F927E5 50C242DF 9912C3B6 61D93313 80301D06
      03551D0E 04160414 1713ABB7 F927E550 C242DF99 12C3B661 D9331380 300D0609
      2A864886 F70D0101 05050003 81810099 8EBE5630 2E6734A8 4D2FD0A5 F09A98F8
      9E49125F AECEF4BB E0DEBB3A 1A449E38 99B02114 7EC84845 B53C2F88 046B7290
      AE44967A 8BE20F5E 9D4A1CFC E1F64FE8 59F51892 23B88B4E 3416808A 68E65660
      644C7DA0 E3A7A525 14FE8E54 67C35F8E CF69EB40 34DFB13D EA302F66 102C822A
      3D7107BA AA4E7273 1D43690E C4A5D4
                    quit
    crypto pki certificate chain test_trustpoint_config_created_for_sdm
    no ip source-route
    ip dhcp excluded-address 192.168.0.230 192.168.0.255
    ip dhcp excluded-address 192.168.0.1 192.168.0.200
    ip dhcp pool QQQ_LAN
    import all
    network 192.168.0.0 255.255.255.0
    default-router 192.168.0.254
    dns-server 192.168.0.6 202.1.161.36
    netbios-name-server 192.168.0.6
    domain-name QQQ.Local
    lease 3
    ip cef
    no ip bootp server
    ip domain name QQQ.Local
    ip name-server 192.168.0.6
    ip name-server 202.1.161.37
    ip name-server 202.1.161.36
    ip inspect log drop-pkt
    no ipv6 cef
    parameter-map type inspect global
    log dropped-packets enable
    parameter-map type protocol-info yahoo-servers
    server name scs.msg.yahoo.com
    server name scsa.msg.yahoo.com
    server name scsb.msg.yahoo.com
    server name scsc.msg.yahoo.com
    server name scsd.msg.yahoo.com
    server name cs16.msg.dcn.yahoo.com
    server name cs19.msg.dcn.yahoo.com
    server name cs42.msg.dcn.yahoo.com
    server name cs53.msg.dcn.yahoo.com
    server name cs54.msg.dcn.yahoo.com
    server name ads1.vip.scd.yahoo.com
    server name radio1.launch.vip.dal.yahoo.com
    server name in1.msg.vip.re2.yahoo.com
    server name data1.my.vip.sc5.yahoo.com
    server name address1.pim.vip.mud.yahoo.com
    server name edit.messenger.yahoo.com
    server name messenger.yahoo.com
    server name http.pager.yahoo.com
    server name privacy.yahoo.com
    server name csa.yahoo.com
    server name csb.yahoo.com
    server name csc.yahoo.com
    parameter-map type protocol-info aol-servers
    server name login.oscar.aol.com
    server name toc.oscar.aol.com
    server name oam-d09a.blue.aol.com
    parameter-map type protocol-info msn-servers
    server name messenger.hotmail.com
    server name gateway.messenger.hotmail.com
    server name webmessenger.msn.com
    password encryption aes
    license udi pid CISCO887VA-K9 sn FGL162321CT
    object-group service MAIL-PORTS
    description QQQ User Mail Restrictions
    tcp eq smtp
    tcp eq pop3
    tcp eq 995
    tcp eq 993
    udp lt rip
    udp lt domain
    tcp eq telnet
    udp lt ntp
    udp lt tftp
    tcp eq ftp
    tcp eq domain
    tcp eq 5900
    tcp eq ftp-data
    tcp eq 3389
    tcp eq 20410
    object-group network Network1
    description QQQ Management Network
    192.168.1.0 255.255.255.0
    192.168.4.0 255.255.255.0
    192.168.5.0 255.255.255.0
    192.168.7.0 255.255.255.0
    192.168.8.0 255.255.255.0
    range 192.168.0.200 192.168.0.254
    range 192.168.0.1 192.168.0.25
    object-group network Network2
    description QQQ User Network
    192.168.2.0 255.255.255.0
    192.168.3.0 255.255.255.0
    192.168.6.0 255.255.255.0
    range 192.168.0.26 192.168.0.199
    object-group network QQQ.Local
    description QQQ_Domain
    192.168.0.0 255.255.255.0
    192.168.1.0 255.255.255.0
    192.168.2.0 255.255.255.0
    192.168.3.0 255.255.255.0
    192.168.4.0 255.255.255.0
    192.168.5.0 255.255.255.0
    192.168.6.0 255.255.255.0
    192.168.8.0 255.255.255.0
    192.168.7.0 255.255.255.0
    192.168.10.0 255.255.255.0
    10.1.0.0 255.255.0.0
    object-group network QQQ_Management_Group
    description QQQ I.T. Devices With UnRestricted Access
    range 192.168.0.200 192.168.0.254
    range 192.168.0.1 192.168.0.25
    192.168.1.0 255.255.255.0
    192.168.8.0 255.255.255.0
    192.168.7.0 255.255.255.0
    192.168.5.0 255.255.255.0
    192.168.4.0 255.255.255.0
    10.1.0.0 255.255.0.0
    192.168.10.0 255.255.255.0
    10.8.0.0 255.255.255.0
    192.168.9.0 255.255.255.0
    192.168.100.0 255.255.255.0
    192.168.20.0 255.255.255.0
    192.168.21.0 255.255.255.0
    192.168.22.0 255.255.255.0
    192.168.23.0 255.255.255.0
    object-group network QQQ_User_Group
    description QQQ I.T. Devices WIth Restricted Access
    range 192.168.0.26 192.168.0.199
    192.168.2.0 255.255.255.0
    192.168.3.0 255.255.255.0
    192.168.6.0 255.255.255.0
    object-group service WEB
    description QQQ User Web Restrictions
    tcp eq www
    tcp eq 443
    tcp eq 8080
    tcp eq 1863
    tcp eq 5190
    username cpadmin privilege 15 password 7 1406031A2C172527
    username QQQVPN privilege 15 secret 4 Hk2tP2GgJ1xXtJUqIZr4gmNSgw6q1E.rvzWiYnDAZHU
    controller VDSL 0
    ip tcp synwait-time 10
    no ip ftp passive
    class-map type inspect match-all sdm-cls-VPNOutsideToInside-1
    match access-group 118
    class-map type inspect match-all sdm-cls-VPNOutsideToInside-3
    match access-group 121
    class-map type inspect match-all sdm-cls-VPNOutsideToInside-2
    match access-group 120
    class-map type inspect imap match-any ccp-app-imap
    match  invalid-command
    class-map type inspect match-any ccp-cls-protocol-p2p
    match protocol edonkey signature
    match protocol gnutella signature
    match protocol kazaa2 signature
    match protocol fasttrack signature
    match protocol bittorrent signature
    class-map type inspect match-all sdm-cls-VPNOutsideToInside-4
    match access-group 122
    class-map type inspect match-all SDM_GRE
    match access-group name SDM_GRE
    class-map type inspect match-any CCP_PPTP
    match class-map SDM_GRE
    class-map type inspect match-any SDM_AH
    match access-group name SDM_AH
    class-map type inspect match-any ccp-skinny-inspect
    match protocol skinny
    class-map type inspect match-any SDM_ESP
    match access-group name SDM_ESP
    class-map type inspect match-any SDM_VPN_TRAFFIC
    match protocol isakmp
    match protocol ipsec-msft
    match class-map SDM_AH
    match class-map SDM_ESP
    class-map type inspect match-all SDM_VPN_PT
    match access-group 117
    match class-map SDM_VPN_TRAFFIC
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol pptp
    match protocol dns
    match protocol ftp
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol netshow
    match protocol shell
    match protocol realmedia
    match protocol rtsp
    match protocol smtp
    match protocol sql-net
    match protocol streamworks
    match protocol tftp
    match protocol vdolive
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-any SDM_IP
    match access-group name SDM_IP
    class-map type inspect gnutella match-any ccp-app-gnutella
    match  file-transfer
    class-map type inspect match-any SDM_HTTP
    match access-group name SDM_HTTP
    class-map type inspect match-any SDM_EASY_VPN_SERVER_TRAFFIC
    match protocol isakmp
    match protocol ipsec-msft
    match class-map SDM_AH
    match class-map SDM_ESP
    class-map type inspect match-all SDM_EASY_VPN_SERVER_PT
    match class-map SDM_EASY_VPN_SERVER_TRAFFIC
    class-map type inspect match-all sdm-cls-http
    match access-group name dmz-traffic
    match protocol http
    class-map type inspect match-any Telnet
    match protocol telnet
    class-map type inspect msnmsgr match-any ccp-app-msn-otherservices
    match  service any
    class-map type inspect ymsgr match-any ccp-app-yahoo-otherservices
    match  service any
    class-map type inspect match-any ccp-h323nxg-inspect
    match protocol h323-nxg
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-any ccp-cls-protocol-im
    match protocol ymsgr yahoo-servers
    match protocol msnmsgr msn-servers
    match protocol aol aol-servers
    class-map type inspect aol match-any ccp-app-aol-otherservices
    match  service any
    class-map type inspect match-all ccp-protocol-pop3
    match protocol pop3
    class-map type inspect match-any ccp-h225ras-inspect
    match protocol h225ras
    class-map type inspect match-any FIREWALL_EXCEPTIONS_CLASS
    match access-group name FIREWALL_EXCEPTIONS_ACL
    class-map type inspect match-any ccp-h323annexe-inspect
    match protocol h323-annexe
    class-map type inspect match-any SDM_EASY_VPN_CTCP_SERVER_PT
    match access-group 102
    match access-group 103
    match access-group 104
    match access-group 105
    match access-group 106
    match access-group 107
    match access-group 108
    match access-group 109
    match access-group 110
    match access-group 111
    match access-group 112
    match access-group 113
    match access-group 114
    match access-group 115
    class-map type inspect match-any SIP
    match protocol sip
    class-map type inspect pop3 match-any ccp-app-pop3
    class-map type inspect match-any SDM_HTTPS
    match access-group name SDM_HTTPS
    class-map type inspect sip match-any ccp-cls-sip-pv-2
    match  protocol-violation
    class-map type inspect kazaa2 match-any ccp-app-kazaa2
    match  file-transfer
    class-map type inspect match-all ccp-protocol-p2p
    match class-map ccp-cls-protocol-p2p
    class-map type inspect match-all ccp-cls-ccp-permit-1
    match access-group name ETS1
    class-map type inspect match-any ccp-h323-inspect
    match protocol h323
    class-map type inspect msnmsgr match-any ccp-app-msn
    match  service text-chat
    class-map type inspect ymsgr match-any ccp-app-yahoo
    match  service text-chat
    class-map type inspect match-all ccp-cls-ccp-pol-outToIn-1
    match access-group name ETS
    class-map type inspect match-all ccp-protocol-im
    match class-map ccp-cls-protocol-im
    class-map type inspect match-all ccp-cls-ccp-pol-outToIn-2
    match class-map Telnet
    match access-group name Telnet
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect http match-any ccp-app-httpmethods
    match  request method bcopy
    match  request method bdelete
    match  request method bmove
    match  request method bpropfind
    match  request method bproppatch
    match  request method connect
    match  request method copy
    match  request method delete
    match  request method edit
    match  request method getattribute
    match  request method getattributenames
    match  request method getproperties
    match  request method index
    match  request method lock
    match  request method mkcol
    match  request method mkdir
    match  request method move
    match  request method notify
    match  request method options
    match  request method poll
    match  request method propfind
    match  request method proppatch
    match  request method put
    match  request method revadd
    match  request method revlabel
    match  request method revlog
    match  request method revnum
    match  request method save
    match  request method search
    match  request method setattribute
    match  request method startrev
    match  request method stoprev
    match  request method subscribe
    match  request method trace
    match  request method unedit
    match  request method unlock
    match  request method unsubscribe
    class-map type inspect match-any ccp-dmz-protocols
    match user-group qqq
    match protocol icmp
    match protocol http
    class-map type inspect edonkey match-any ccp-app-edonkey
    match  file-transfer
    match  text-chat
    match  search-file-name
    class-map type inspect match-any ccp-sip-inspect
    match protocol sip
    class-map type inspect match-all sdm-cls-sip
    match access-group name dmz-traffic
    match protocol sip
    class-map type inspect match-all ccp-dmz-traffic
    match access-group name dmz-traffic
    match class-map ccp-dmz-protocols
    class-map type inspect http match-any ccp-http-blockparam
    match  request port-misuse im
    match  request port-misuse p2p
    class-map type inspect edonkey match-any ccp-app-edonkeydownload
    match  file-transfer
    class-map type inspect match-all ccp-protocol-imap
    match protocol imap
    class-map type inspect aol match-any ccp-app-aol
    match  service text-chat
    class-map type inspect edonkey match-any ccp-app-edonkeychat
    match  search-file-name
    match  text-chat
    class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-1
    match class-map SIP
    match access-group name SIP
    class-map type inspect fasttrack match-any ccp-app-fasttrack
    match  file-transfer
    class-map type inspect http match-any ccp-http-allowparam
    match  request port-misuse tunneling
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    policy-map type inspect ccp-permit-icmpreply
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    policy-map type inspect p2p ccp-action-app-p2p
    class type inspect edonkey ccp-app-edonkeychat
      log
      allow
    class type inspect edonkey ccp-app-edonkeydownload
      log
      allow
    class type inspect fasttrack ccp-app-fasttrack
      log
      allow
    class type inspect gnutella ccp-app-gnutella
      log
      allow
    class type inspect kazaa2 ccp-app-kazaa2
      log
      allow
    policy-map type inspect PF_OUT_TO_IN
    class type inspect FIREWALL_EXCEPTIONS_CLASS
      pass
    policy-map type inspect PF_IN_TO_OUT
    class type inspect FIREWALL_EXCEPTIONS_CLASS
      pass
    policy-map type inspect im ccp-action-app-im
    class type inspect aol ccp-app-aol
      log
      allow
    class type inspect msnmsgr ccp-app-msn
      log
      allow
    class type inspect ymsgr ccp-app-yahoo
      log
      allow
    class type inspect aol ccp-app-aol-otherservices
      log
      reset
    class type inspect msnmsgr ccp-app-msn-otherservices
      log
      reset
    class type inspect ymsgr ccp-app-yahoo-otherservices
      log
      reset
    policy-map type inspect http ccp-action-app-http
    class type inspect http ccp-http-blockparam
      log
      reset
    class type inspect http ccp-app-httpmethods
      log
      reset
    class type inspect http ccp-http-allowparam
      log
      allow
    policy-map type inspect imap ccp-action-imap
    class type inspect imap ccp-app-imap
      log
    policy-map type inspect pop3 ccp-action-pop3
    class type inspect pop3 ccp-app-pop3
      log
    policy-map type inspect ccp-inspect
    class type inspect ccp-protocol-http
      inspect
      service-policy http ccp-action-app-http
    class type inspect ccp-protocol-imap
      inspect
      service-policy imap ccp-action-imap
    class type inspect ccp-protocol-pop3
      inspect
      service-policy pop3 ccp-action-pop3
    class type inspect ccp-protocol-p2p
      inspect
      service-policy p2p ccp-action-app-p2p
    class type inspect ccp-protocol-im
      inspect
      service-policy im ccp-action-app-im
    class type inspect ccp-insp-traffic
      inspect
    class type inspect ccp-sip-inspect
      inspect
    class type inspect ccp-h323-inspect
      inspect
    class type inspect ccp-h323annexe-inspect
      inspect
    class type inspect ccp-h225ras-inspect
      inspect
    class type inspect ccp-h323nxg-inspect
      inspect
    class type inspect ccp-skinny-inspect
      inspect
    class type inspect ccp-invalid-src
      drop log
    class class-default
      drop
    policy-map type inspect ccp-permit
    class type inspect SDM_VPN_PT
      pass
    class type inspect ccp-cls-ccp-permit-1
      pass
    class type inspect SDM_EASY_VPN_SERVER_PT
      pass
    class type inspect SDM_EASY_VPN_CTCP_SERVER_PT
      inspect
    class class-default
      drop
    policy-map type inspect sip ccp-app-sip-2
    class type inspect sip ccp-cls-sip-pv-2
      allow
    policy-map type inspect ccp-permit-dmzservice
    class type inspect ccp-cls-ccp-permit-dmzservice-1
      pass
    class type inspect ccp-dmz-traffic
      inspect
    class type inspect sdm-cls-http
      inspect
      service-policy http ccp-action-app-http
    class type inspect sdm-cls-VPNOutsideToInside-1
      inspect
    class type inspect sdm-cls-VPNOutsideToInside-2
      inspect
    class type inspect sdm-cls-VPNOutsideToInside-3
      pass
    class class-default
      pass
    policy-map type inspect ccp-pol-outToIn
    class type inspect ccp-cls-ccp-pol-outToIn-1
      pass
    class type inspect ccp-cls-ccp-pol-outToIn-2
      pass
    class type inspect CCP_PPTP
      pass
    class type inspect sdm-cls-VPNOutsideToInside-1
      inspect
    class type inspect sdm-cls-VPNOutsideToInside-2
      inspect
    class type inspect sdm-cls-VPNOutsideToInside-3
      pass
    class type inspect sdm-cls-VPNOutsideToInside-4
      inspect
    class class-default
      drop log
    policy-map type inspect sdm-permit-ip
    class type inspect SDM_IP
      pass
    class type inspect sdm-cls-VPNOutsideToInside-2
      inspect
    class type inspect sdm-cls-VPNOutsideToInside-3
      pass
    class type inspect sdm-cls-VPNOutsideToInside-4
      inspect
    class class-default
      drop log
    zone security dmz-zone
    zone security in-zone
    zone security out-zone
    zone security ezvpn-zone
    zone-pair security ccp-zp-out-dmz source out-zone destination dmz-zone
    service-policy type inspect ccp-permit-dmzservice
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
    service-policy type inspect ccp-pol-outToIn
    zone-pair security ccp-zp-in-dmz source in-zone destination dmz-zone
    service-policy type inspect ccp-permit-dmzservice
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security dmz-to-in source dmz-zone destination in-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-in-ezvpn2 source in-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-in-ezvpn1 source dmz-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-in2 source ezvpn-zone destination in-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination dmz-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-in3 source ezvpn-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    crypto ctcp port 10000 1723 6299
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 2
    encr aes 256
    authentication pre-share
    group 2
    crypto isakmp key 6 PbKM_WfaCM[hYNXAFOUgCNgCB_ZdJEAAB address 220.245.109.219
    crypto isakmp key 6 NddQRR[O^KY`GRDC[VZUEPE`CSJ^CDAAB address 0.0.0.0 0.0.0.0
    crypto isakmp client configuration group QQQ
    key 6 UWVBhb`Lgc_AZbDYWDFZiGZTTadNYTAAB
    dns 192.168.0.6 202.1.161.36
    wins 192.168.0.6
    domain QQQ.Local
    pool SDM_POOL_1
    include-local-lan
    max-users 20
    max-logins 1
    netmask 255.255.255.0
    banner ^CCWelcome to QQQ VPN!!!!1                 ^C
    crypto isakmp profile ciscocp-ike-profile-1
       match identity group QQQ
       client authentication list ciscocp_vpn_xauth_ml_1
       isakmp authorization list ciscocp_vpn_group_ml_1
       client configuration address initiate
       client configuration address respond
       keepalive 10 retry 2
       virtual-template 1
    crypto ipsec transform-set ESP_AES_SHA esp-aes 256 esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec profile CiscoCP_Profile1
    set security-association idle-time 43200
    set transform-set ESP_AES_SHA
    set isakmp-profile ciscocp-ike-profile-1
    crypto map SDM_CMAP_1 1 ipsec-isakmp
    description Tunnel to220.245.109.219
    set peer 220.245.109.219
    set transform-set ESP-3DES-SHA
    match address 119
    interface Loopback0
    description QQQ_VPN
    ip address 192.168.9.254 255.255.255.0
    interface Null0
    no ip unreachables
    interface Ethernet0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    shutdown
    no fair-queue
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    no atm ilmi-keepalive
    interface ATM0.1 point-to-point
    description Telekom_ADSL
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    zone-member security out-zone
    pvc 8/35
      pppoe-client dial-pool-number 1
    interface FastEthernet0
    description QQQ_LAN-VLAN_1
    switchport access vlan 1
    no ip address
    interface FastEthernet1
    description QQQ_LAN-VLAN_1
    no ip address
    interface FastEthernet2
    description QQQ_WAN-VLAN_2
    switchport access vlan 2
    no ip address
    interface FastEthernet3
    description QQQ_DMZ-IP_PBX-VLAN_3
    switchport access vlan 3
    no ip address
    interface Virtual-Template1 type tunnel
    description QQQ_Easy_VPN
    ip unnumbered Loopback0
    ip nat inside
    ip virtual-reassembly in
    zone-member security ezvpn-zone
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface Vlan1
    description QQQ_LAN-VLAN1$FW_INSIDE$
    ip address 192.168.0.254 255.255.255.0
    ip access-group QQQ_ACL in
    ip mask-reply
    ip nat inside
    ip virtual-reassembly in
    zone-member security in-zone
    ip tcp adjust-mss 1412
    interface Vlan2
    description QQQ_WAN-VLAN2$FW_INSIDE$
    ip address 192.168.5.254 255.255.255.0
    ip access-group QQQ_ACL in
    ip mask-reply
    ip nat inside
    ip virtual-reassembly in
    zone-member security in-zone
    ip tcp adjust-mss 1412
    interface Vlan3
    description QQQ_IP-PBX_WAN-VLAN3
    ip address 192.168.4.254 255.255.255.0
    ip mask-reply
    ip nat inside
    ip virtual-reassembly in
    zone-member security dmz-zone
    interface Vlan4
    description VLAN4 - 192.168.20.xxx (Spare)
    ip address 192.168.20.253 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    zone-member security in-zone
    interface Dialer0
    description ATM Dialer
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat outside
    ip virtual-reassembly in
    zone-member security out-zone
    no cdp enable
    interface Dialer2
    description $FW_OUTSIDE$
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1452
    ip nbar protocol-discovery
    ip flow ingress
    ip flow egress
    ip nat outside
    ip virtual-reassembly in
    zone-member security out-zone
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname xxxxxxxxxxxxxxxxxxx
    ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxxxxx
    ppp pap sent-username xxxxxxxxxx0 password 7 xxxxxxxxxxxxxxxxxxxxx
    no cdp enable
    crypto map SDM_CMAP_1
    router rip
    version 2
    redistribute static
    passive-interface ATM0
    passive-interface ATM0.1
    passive-interface Dialer0
    passive-interface Dialer2
    passive-interface Ethernet0
    passive-interface Loopback0
    network 10.0.0.0
    network 192.168.0.0
    network 192.168.1.0
    network 192.168.2.0
    network 192.168.3.0
    network 192.168.4.0
    network 192.168.5.0
    network 192.168.6.0
    network 192.168.7.0
    network 192.168.8.0
    network 192.168.10.0
    network 192.168.100.0
    ip local pool SDM_POOL_1 192.168.5.100 192.168.5.200
    ip forward-protocol nd
    ip http server
    ip http access-class 5
    ip http authentication local
    ip http secure-server
    ip nat pool NAT_IP 192.168.0.210 192.168.0.235 netmask 255.255.255.0
    ip nat inside source static tcp 192.168.4.253 5060 interface Dialer2 5060
    ip nat inside source static tcp 192.168.0.240 20408 interface Dialer2 6208
    ip nat inside source static tcp 192.168.0.240 20409 interface Dialer2 6209
    ip nat inside source static tcp 192.168.0.240 20410 interface Dialer2 6200
    ip nat inside source static tcp 192.168.1.240 20408 interface Dialer2 6218
    ip nat inside source static tcp 192.168.1.240 20409 interface Dialer2 6219
    ip nat inside source static tcp 192.168.1.240 20410 interface Dialer2 6210
    ip nat inside source static tcp 192.168.7.240 20408 interface Dialer2 6278
    ip nat inside source static tcp 192.168.7.240 20409 interface Dialer2 6279
    ip nat inside source static tcp 192.168.7.240 20410 interface Dialer2 6270
    ip nat inside source static tcp 192.168.8.240 20408 interface Dialer2 6288
    ip nat inside source static tcp 192.168.8.240 20409 interface Dialer2 6289
    ip nat inside source static tcp 192.168.8.240 20410 interface Dialer2 6280
    ip nat inside source static tcp 192.168.0.6 1723 interface Dialer2 1723
    ip nat inside source static tcp 192.168.0.6 3389 interface Dialer2 6389
    ip nat inside source static tcp 192.168.0.24 3389 interface Dialer2 6390
    ip nat inside source static tcp 192.168.4.253 8022 interface Dialer2 8022
    ip nat inside source static tcp 192.168.4.253 80 interface Dialer2 8021
    ip nat inside source static tcp 192.168.0.254 23 interface Dialer2 8023
    ip nat inside source static tcp 192.168.0.6 443 interface Dialer2 443
    ip nat inside source route-map SDM_RMAP_1 interface Dialer2 overload
    ip default-network 192.168.0.0
    ip default-network 192.168.4.0
    ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
    ip route 10.1.0.0 255.255.0.0 Vlan2 permanent
    ip route 10.8.0.0 255.255.255.0 Vlan2 permanent
    ip route 192.168.0.0 255.255.255.0 Vlan1 permanent
    ip route 192.168.4.0 255.255.255.0 Vlan3 permanent
    ip route 192.168.5.0 255.255.255.0 Vlan2 permanent
    ip route 192.168.100.0 255.255.255.0 Dialer2 permanent
    ip access-list extended ACCESS_FROM_INSIDE
    permit ip object-group QQQ_Management_Group any
    permit tcp object-group QQQ_User_Group any eq smtp pop3
    permit tcp object-group QQQ_User_Group any eq 993 995
    permit tcp 192.168.0.0 0.0.0.255 any eq smtp pop3
    permit tcp 192.168.0.0 0.0.0.255 any eq 993 995
    permit ip 192.168.1.0 0.0.0.255 any
    permit ip 192.168.4.0 0.0.0.255 any
    permit ip 192.168.5.0 0.0.0.255 any
    permit ip 192.168.7.0 0.0.0.255 any
    permit ip 192.168.8.0 0.0.0.255 any
    permit tcp 192.168.2.0 0.0.0.255 any eq www 443 8080 domain
    permit tcp 192.168.2.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
    permit tcp 192.168.3.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
    permit tcp 192.168.4.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
    permit udp 192.168.2.0 0.0.0.255 any eq domain time-range QQQ_Control
    permit udp 192.168.3.0 0.0.0.255 any eq domain time-range QQQ_Control
    permit udp 192.168.4.0 0.0.0.255 any eq domain time-range QQQ_Control
    ip access-list extended ETS
    remark CCP_ACL Category=128
    permit ip host 203.219.237.252 any
    ip access-list extended ETS1
    remark CCP_ACL Category=128
    permit ip host 203.219.237.252 any
    ip access-list extended FIREWALL_EXCEPTIONS_ACL
    permit tcp any host 192.168.0.100 eq 25565
    permit tcp any eq 25565 host 192.168.0.100
    ip access-list extended QQQ_ACL
    permit ip any host 192.168.4.253
    permit udp any any eq bootps bootpc
    permit ip any 192.168.4.0 0.0.0.255
    permit ip host 203.219.237.252 any
    remark QQQ Internet Control List
    remark CCP_ACL Category=17
    remark Auto generated by CCP for NTP (123) 203.12.160.2
    permit udp host 203.12.160.2 eq ntp any eq ntp
    remark AD Services
    permit udp host 192.168.0.6 eq domain any
    remark Unrestricted Access
    permit ip object-group QQQ_Management_Group any
    remark Restricted Users
    permit object-group MAIL-PORTS object-group QQQ_User_Group any
    permit ip 192.168.0.0 0.0.0.255 any time-range QQQ_Control
    permit ip 192.168.2.0 0.0.0.255 any time-range QQQ_Control
    permit ip 192.168.3.0 0.0.0.255 any time-range QQQ_Control
    permit ip 192.168.6.0 0.0.0.255 any time-range QQQ_Control
    remark ICMP Full Access
    permit icmp object-group QQQ_User_Group any
    permit tcp 192.168.2.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
    permit tcp 192.168.3.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
    permit tcp 192.168.6.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
    permit udp 192.168.6.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
    permit tcp 192.168.0.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
    permit udp 192.168.0.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
    permit udp 192.168.2.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
    permit udp 192.168.3.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
    ip access-list extended QQQ_NAT
    remark CCP_ACL Category=18
    remark IPSec Rule
    deny   ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
    permit ip any any
    ip access-list extended SDM_AH
    remark CCP_ACL Category=1
    permit ahp any any
    ip access-list extended SDM_ESP
    remark CCP_ACL Category=1
    permit esp any any
    ip access-list extended SDM_GRE
    remark CCP_ACL Category=1
    permit gre any any
    ip access-list extended SDM_HTTP
    remark CCP_ACL Category=0
    permit tcp any any eq telnet
    ip access-list extended SDM_HTTPS
    remark CCP_ACL Category=0
    permit tcp any any eq 443
    ip access-list extended SDM_IP
    remark CCP_ACL Category=1
    permit ip any any
    ip access-list extended SIP
    remark CCP_ACL Category=128
    permit ip any 192.168.4.0 0.0.0.255
    ip access-list extended Telnet
    remark CCP_ACL Category=128
    permit ip any any
    ip access-list extended dmz-traffic
    remark CCP_ACL Category=1
    permit ip any 192.168.4.0 0.0.0.255
    access-list 1 remark CCP_ACL Category=2
    access-list 1 remark QQQ_DMZ
    access-list 1 permit 192.168.4.0 0.0.0.255
    access-list 2 remark CCP_ACL Category=2
    access-list 2 remark QQQ_LAN
    access-list 2 permit 192.168.0.0 0.0.0.255
    access-list 3 remark QQQ Insid NAT
    access-list 3 remark CCP_ACL Category=2
    access-list 3 permit 192.168.0.0 0.0.0.255
    access-list 3 permit 192.168.1.0 0.0.0.255
    access-list 3 permit 192.168.2.0 0.0.0.255
    access-list 3 permit 192.168.3.0 0.0.0.255
    access-list 3 permit 192.168.4.0 0.0.0.255
    access-list 3 permit 192.168.5.0 0.0.0.255
    access-list 3 permit 192.168.6.0 0.0.0.255
    access-list 3 permit 192.168.7.0 0.0.0.255
    access-list 3 permit 192.168.8.0 0.0.0.255
    access-list 3 permit 192.168.9.0 0.0.0.255
    access-list 3 permit 192.168.10.0 0.0.0.255
    access-list 4 remark QQQ_NAT
    access-list 4 remark CCP_ACL Category=2
    access-list 4 permit 10.1.0.0 0.0.255.255
    access-list 4 permit 10.8.0.0 0.0.0.255
    access-list 4 permit 192.168.0.0 0.0.0.255
    access-list 4 permit 192.168.1.0 0.0.0.255
    access-list 4 permit 192.168.2.0 0.0.0.255
    access-list 4 permit 192.168.3.0 0.0.0.255
    access-list 4 permit 192.168.4.0 0.0.0.255
    access-list 4 permit 192.168.5.0 0.0.0.255
    access-list 4 permit 192.168.6.0 0.0.0.255
    access-list 4 permit 192.168.7.0 0.0.0.255
    access-list 4 permit 192.168.8.0 0.0.0.255
    access-list 4 permit 192.168.9.0 0.0.0.255
    access-list 4 permit 192.168.10.0 0.0.0.255
    access-list 5 remark HTTP Access-class list
    access-list 5 remark CCP_ACL Category=1
    access-list 5 permit 192.168.4.0 0.0.0.255
    access-list 5 permit 192.168.0.0 0.0.0.255
    access-list 5 deny   any
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip 192.168.4.0 0.0.0.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 100 permit ip host 255.255.255.255 any
    access-list 101 remark QQQ_Extended_ACL
    access-list 101 remark CCP_ACL Category=1
    access-list 101 permit tcp any host 192.168.0.254 eq 10000
    access-list 101 permit udp any host 192.168.0.254 eq non500-isakmp
    access-list 101 permit udp any host 192.168.0.254 eq isakmp
    access-list 101 permit esp any host 192.168.0.254
    access-list 101 permit ahp any host 192.168.0.254
    access-list 101 remark Auto generated by CCP for NTP (123) 203.12.160.2
    access-list 101 permit udp host 203.12.160.2 eq ntp host 192.168.4.254 eq ntp
    access-list 101 permit udp host 192.168.0.6 eq domain any
    access-list 101 remark NTP (123) 203.12.160.2
    access-list 101 permit udp host 203.12.160.2 eq ntp any eq ntp
    access-list 101 remark QQQ_ANY_Any
    access-list 101 permit ip object-group QQQ.Local any
    access-list 101 remark QQQ_DMZ
    access-list 101 permit ip any 192.168.4.0 0.0.0.255
    access-list 101 remark QQQ_GRE
    access-list 101 permit gre any any
    access-list 101 remark QQQ_Ping
    access-list 101 permit icmp any any
    access-list 102 remark CCP_ACL Category=1
    access-list 102 permit tcp any any eq 10000
    access-list 103 permit tcp any 192.168.0.0 0.0.0.255 eq 443
    access-list 103 remark CCP_ACL Category=1
    access-list 103 permit tcp any any eq 10000
    access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq 8022
    access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq telnet
    access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq www
    access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq 5060
    access-list 103 permit tcp any eq telnet host 192.168.0.254
    access-list 103 permit tcp any 192.168.0.0 0.0.0.255 eq telnet
    access-list 103 permit udp any 192.168.4.0 0.0.0.255 eq 5060
    access-list 103 permit udp any 192.168.4.0 0.0.0.255 range 10001 12000
    access-list 104 remark CCP_ACL Category=1
    access-list 104 permit tcp any any eq 10000
    access-list 105 remark CCP_ACL Category=1
    access-list 105 permit tcp any any eq 10000
    access-list 106 remark CCP_ACL Category=1
    access-list 106 permit tcp any any eq 10000
    access-list 107 remark CCP_ACL Category=1
    access-list 107 permit tcp any any eq 10000
    access-list 108 remark CCP_ACL Category=1
    access-list 108 permit tcp any any eq 10000
    access-list 109 remark CCP_ACL Category=1
    access-list 109 permit tcp any any eq 10000
    access-list 110 remark CCP_ACL Category=1
    access-list 110 permit tcp any any eq 10000
    access-list 111 remark CCP_ACL Category=1
    access-list 111 permit tcp any any eq 10000
    access-list 112 remark CCP_ACL Category=1
    access-list 112 permit tcp any any eq 10000
    access-list 113 remark CCP_ACL Category=1
    access-list 113 permit tcp any any eq 10000
    access-list 114 remark CCP_ACL Category=1
    access-list 114 permit tcp any any eq 10000
    access-list 115 remark CCP_ACL Category=1
    access-list 115 permit tcp any any eq 10000
    access-list 116 remark CCP_ACL Category=4
    access-list 116 remark IPSec Rule
    access-list 116 permit ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
    access-list 117 remark CCP_ACL Category=128
    access-list 117 permit ip any any
    access-list 117 permit ip host 220.245.109.219 any
    access-list 118 remark CCP_ACL Category=0
    access-list 118 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.0.255
    access-list 119 remark CCP_ACL Category=4
    access-list 119 remark IPSec Rule
    access-list 119 permit ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
    access-list 120 remark CCP_ACL Category=0
    access-list 120 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.0.255
    access-list 121 remark CCP_ACL Category=0
    access-list 121 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.255.255
    access-list 122 remark CCP_ACL Category=0
    access-list 122 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.255.255
    dialer-list 1 protocol ip permit
    route-map SDM_RMAP_1 permit 1
    match ip address QQQ_NAT
    banner login ^CCWelcome to QQQ ADSL Gateway

    It turns out the problem had nothing to do with wires or splitters.  The Verizon tech was at my house yesterday and the ONT was failing.  He replaced part of the ONT and it fixed the problem (finally!).  At least I was able to watch the Celtics game last night.
    I have a Tellabs ONT.  Not sure the model but it's older like the ones in this thread.
    http://www.dslreports.com/forum/r19982000-Mounting-board-for-612-ONT

  • I need Help setting up port forwarding for my foscam FI8910W.

    I am currently on Mac OS X 10.7.5. My ISP is verizon FIOS and I have an Actiontec MI424WR router with the wireless turned off. I have an AirPort Extreme running from the actiontec router for my wireless network. First of all I need to know if I should plug the Foscam into the actiontec router or the Airport Extreme? Then I need to know if I should set up the port forwarding on the Actiontec or the Airport Extreme. Lastly I need detailed instructions on how to set up the port forwarding. Hopefully someone has a solution. Thanks

    OK, and what sort of help do you need?

  • I need help changing settings (port forward?) after a physical server move

    Hi! I have a 10.6 server that I use at home. All is well and good there. The Airport Extreme assigns IP addresses for the network. I have www.mydomain.com that runs on the server -- I use it for testing web apps, etc. I use DynDNS with their client app that send the Comcast dynamic IP address back to DynDNS to keep the server on the grid.
    My friend has a 10.6 server. He has www.hisdomain.com as a home business. He also uses DynDNS in a similar way. His landlord just informed him that his apartment is going to be sold from underneath him and he has to move ASAP. It looks like he won't have a permanent place for a month or two, so I offered to let him keep his server at my place.
    We both run websites on port 443 and port 80.
    After attaching his server to my network, his domain name updates, but typing www.hisdomain.com into a browser lands me on www.mydomain.com. I guess that the problem is port forwarding... the router sends all 443 and 80 requests to my server.
    How do I configure this so that services for hisdomain.com are forwarded to his server while services for mydomain.com are forwarded to my server?

    Short answer: you can't, although there are a couple of ways to sort-of kluge it.
    Long answer: When your router gets an incoming connection, the only thing it has to go on is the IP address and port number (the domain name is sent much later, after TCP session with the server is established). So unless you have multiple public IP addresses (and a router that can handle them), or want to put the sites on different ports...
    Speaking of which, here's kluge #1: run his server on different ports (e.g. 81 and 444, or maybe 8080 and 8043) and set the router to forward them to his server. Problem: the user has to include the port number in the URL when they connect, or they'll get your server.
    Partial solution (and kluge #2): add a virtual site on your server, with the hostname www.hisdomain.com, go to its Aliases section, and add a rule in the URL Aliases & Redirects section, with these settings:
    Type: RedirectMatch
    Pattern: (.*)$
    Path: http://www.hisdomain.com:81$1
    Then build an SSL version that redirects to https://www.hisdomain.com:444$1. Problem: when the client connects, they'll get your SSL certificate instead of his (again, it happens before the client sends the domain name it's trying to reach), and get a cert error. No fix for this.
    Kluge #3: instead of making the virtual site redirect clients to his server, add a reverse proxy so your server'll transparently forward requests to his server, and proxy the replies. I haven't done this, but I think what you need to do is make a virtual site (as above), and under its Proxy tab (the one under the virtual site, not the one under the Settings section), check the Enable Reverse Proxy box, leave the Proxy Path as "/" and the Sticky Session Identifier field blank, and add a Balancer member with the Server URL "http://hisinternalipaddress" and a blank Route. Or something like that. Again, you could do the same for https as well, but you'll have the same certificate problem.

  • Home Hub 3 Port Forwarding Issue - Question to BT

    Question to BT
    Hello i have recently joined BT Infinity and have hit the issue of the Port Forwarding not working. My HH3 is on the following version of software. Will this version automatically upgrade to the latest version of firmware and will this fix my port forwarding issue?
    As i work in IT (Cisco Network Eng) i need to be able to access several devices/services at home and this is a real pain for me. If you think that this could drag on as some posts have indicated could you please let me know and i will either get a draytek or throw in a cisco 1841.
    Thank you
    Dean.
    Current firmware:
    V100R001C01B031SP09_L_B
    Last updated:
    Unknown

    requiem wrote:
    Question to BT
    Hello i have recently joined BT Infinity and have hit the issue of the Port Forwarding not working. My HH3 is on the following version of software. Will this version automatically upgrade to the latest version of firmware and will this fix my port forwarding issue?.........
    Thank you
    Dean.
    Current firmware:
    V100R001C01B031SP09_L_B
    Last updated:
    Unknown
    Hi Dean
    By the look of it you've got the type B version of the HH3 with current firmware.
    From http://bt.custhelp.com/app/answers/detail/a_id/13073
    The latest versions of the firmware are:
    BT Home Hub 3 – Software version 4.7.5.1.83.8.57.1.3 (Type A) or V100R001C01B031SP09_L_B
    Please Click On any Text in Blue as that automatically links to information.
    PC (NDEGR)

  • Port Forwarding/Firewall Query

    I've got the BT 2Wire.com gateway router, and I'm mystified by the setup screen, when I want to add more than one firewall pinhole for a pc on my network, it complains that that pinhole is already assigned to another pc.
    But I don't understand that a pinhole in the firewall isn't the same as 'port-forwarding' is it?
    I might have multiple pcs behind the router all of which need the same hole in the firewall.

    There may be quite a few diffences, they could mean port forwarding.
    The BT Business forum is at http://business.forums.bt.com
    Its possible someone there may be able to help.
    There s a general guide to port forwarding on my website.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • New Hard drive, can't access certain aspects. Help needed please

    Hi everyone.
    I have an HP Pavilion dv6-6052ea laptop.
    I've been having problems with the hard drive so got a new one installed.
    My main issues are since getting it back, I can't access any of the original HP installations etc (I've downloaded all the drivers I know about through HP).
    The 2 main things I'm missing are 2 things that came with the laptop.
    1: Beats Audio sound system 
    2: Video Graphics: AMD Radeon HD 6490M (1 GB DDR5)
    and I have no idea how to get them back. Can anyone help. Do I need to install specific drivers? I can't find any trace that they exist on my laptop now apart from the stickers on the laptop! Any help is greatly appreciated. 
    I never had any CD back ups for the laptop. I do have the old HP back up etc saved on a USB but I don't know enough about the folders and files to know what I need to look for. (I still have the old hardrive.)
    Again, any help is massively appreciated. Thank you!
    Tony 

    If you used your HP Recovery Media, all factory install drivers and software would have been installed. If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    If a generic Windows 7 installation disc was used, you will need to install all HP specific driver for your computer. Please try IDT High-Definition (HD) Audio Driver, Intel High-Definition (HD) Graphics Driver, and AMD High-Definition Graphics Driver to resolve your missing drivers issues. Windows 7 64-bit driver for your computer can be found on the HP Pavilion dv6-6052ea Entertainment Notebook PC Drivers page.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Help setting up port forwarding for Ekiga

    Hi
    I am trying to set up Ekiga on my Arch X86_64 box but I can't get port forwarding to work on the Thomson TG585v7 wireless router, which I am sharing with a neighbor.  I have tried some how-to's I found via Google and set up Application/Game Sharing for the ports Ekiga uses.  I also set up static IP connection as it seems to be needed by the router for port forwarding to work but Ekiga still reports that it cannot set up my network connection and asks me to set up port forwading manually, which I have already done.
    I would very much appreciate any help to get Ekiga going for me.
    My thanks in advance.

    graysky wrote:No idea for you specific hardware but should be pretty trivial.  http://wiki.ekiga.org/index.php/Enable_ … g_manually
    Thanks, but the problem is that setting up the router doesn't seem to work. I checked and repeated the set up a few times but no result. I feel I am missing a little detail somewhere but can't put my finger on it :-(

  • HELP NEEDED PLEASE

    Hi everyone
    Programming help needed here. Any advice would be greatly appreciated!!!
    I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
    I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
    I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
    I think the programs are very simple for a programmer, although I AM NOT.
    CODE is BELOW
    // Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
    // Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
    // Decompiler options: packimports(3)
    // Source File Name: Assign2_1.java
    import processing.core.PApplet;
    public class Assign2_1 extends PApplet
    public Assign2_1()
    SquareSide = 20;
    Rank = Nums.length;
    Side = SquareSide * Rank;
    Green = color(0, 255, 0);
    Yellow = color(255, 255, 0);
    BG = Yellow;
    public void setup()
    size(Side, Side);
    background(BG);
    fill(Green);
    for(int i = 0; i < Rank; i++)
    rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
    public static void main(String args[])
    PApplet.main(new String[] {
    "--bgcolor=#ece9d8", "Assign2_1"
    int Nums[] = {
    6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
    9, 2, 0, 5
    int SquareSide;
    int Rank;
    int Side;
    int Green;
    int Yellow;
    int BG;
    Edited by: chevy1 on May 2, 2009 7:32 AM

    HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
    Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
    Also use CODE tags when posting code as it make the code more readable.
    We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

  • ITunes corrupt file message - urgent help needed please

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

  • MP3 burning help needed please

    Hi,
    I'm hoping someone can help me please.
    I'm wanting to burn a mp3 cd but with the songs in separate folders so that when i play them in my car i can flick between the albums instead of having to go through all the singles one after another.
    Does anyone know of a good mp3 burner that can do this, and where to get it from too.
    All and any help in this matter is greatly appreciated
    Cheers
    Paul

    You want them in separate Album folders?
    Put the songs into the playlist.
    Sort the playlist by Album then burn it as MP3* disc.
    This will put the songs into Album folders.
    Likewise, if you sort by Artist, songs will be put into Artist/Album/ folders.
    * Note that only MP3 files will be burned to the disc. If the files are not already MP3 format, they will be skipped.
    If you burn it as a DataCD, it wil work the same except it will copy the files regardless of format. I do this as my CD player will work with both AAC & MP3 formats.

Maybe you are looking for

  • How do I set it up so that when I reply to a website through Firefox, it is sent through Google and not Outlook

    I use Google for my email server. When I am searching the web on Firefox, I want to reply to a "Contact Me" prompt from the website.....in that case, how do I set Firefox up so that it replies via Google and not Microsoft outlook?

  • Failure in Oracle 11.2.3.0 upgrade

    Windows 2008 server I'm trying to upgrade a Oracle 11.2.0.2 database to 11.2.0.3. I use DBUA, go through the screen and start the process. The issue get to about 2% and it fails with the following error ORA-01078: failure in processing system paramet

  • How can i synchronize incoming pdf files with adobe reader

    i have just set up my new pc and now whenever i receive a pdf file i can not edit it, unless i go through x amount of steps. opening adobe, opening the file and every time the same proceder. what to do that pdf files get automatically upon downloadin

  • Google Chromecast stopped work - Parental controls...

    Hi I have been using a Chromecast to watch Netflix on my Sony Bravia TV and it has worked fine for several months. Now it has stopped working and I see the message "Chromecast connected to -BT Hub name- but can't access the internet": The only thing

  • Error msg (-1303)

    I'm trying to upload movies to my iPad for the first time. My Library is on a network drive (\\MYBOOKLIVE\Public). When I try to import any one of three different m4v files into iTunes I get an error message "Attempting to copy to the disk 'Public' f