Help needed regarding iMac G3 model..

I need scripts of following modem:
V90
V92
Can anyone please help me on this..??

What modem are you attempting to use? Is it the internal modem card that shipped with your iMac? If so, the appropriate modem scripts are included in the folder of the same name. I think you have a choice of using a v.34 or v.90 script, but you won't find a v.92 script for it, because that protocol didn't exist when the G3 iMacs were manufactured. You select the modem script to use with your PPP connection software. I always used the third-party "FreePPP" connection software with my pre-OS X Macs, but it used Apple's Modem Script database. If you're using a third-party external modem, the manufacturer should have included pre-OS X and OS X modem scripts for it. US Robotics has a good USB mini-modem that I've successfully used with older Macs having a USB port, and the modem scripts were included on the installer disk. If you want to create your own script, the generic initialization command AT&F or AT&F1 works for many different (hardware controller-based) modems. Additional commands can be added to fine-tune the modem, such as setting the minimum connection speed.

Similar Messages

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed regarding the updation of "Relationships" in BP

Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding Segment Qualifiers

Hi,
In my process of implementing Apps R12 afresh, we just created the segments and assigned them their flexfield qualifiers today. In that, the one assigned towards alancing segment shows the value qualifiers like that of natural accounting segment, unlike the bal. segment value qualifier.
I mean, when we try to insert a a value in the bal.segment it asks for qualifiers such as nature:expense/revenue/liability/asset, instead of going for the allow posting and allow budgeting alone. This is crazy, and I need your support.
Thanks,
Mukunthan L

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Help needed regarding BADI.

hi all,
can anyone plz tell me how to define BADI and how create an interface.
plz tell from everything regarding that, i have work with basic ABAP only.
anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
regards.
raman.

Hi Raman,
Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
The specified item was not found.
BADI
Best Regards.

Help needed regarding font sizes

Iam generating pdf documents using oracle developer's report builder.
When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
Is there any parameters that has to be set for it.Pls help

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

Help needed, regarding my iMac, AirPlay and AppleTV

Hi, I'm trying to send wirelessly the content of my iMac to a device via my AppleTV (model A1469).
I've checked twice that my iMac and my AppleTV are connected to the same network, however
I cannot make the AirPlay work. The AirPlay status icon won't appear on the menu bar of my iMac
Can some one help, please?
Cheers.

https://support.apple.com/en-us/HT201343
Check this support document to see if your iMac is compatible. iMacs older than mid 2011 will not work.

Imac G4 question - help needed regarding downloading

Help! My wife and I both use our G4 a lot - she teaches 2nd grade so you can imagine how much she uses it. (If it matters, we use 10.3.9) Here in a nutshell is the problem. For some reason we are not able to download any type of files. This just started out of the blue. The download box opens up - the desired file shows up - then it will say "Cannot create file" When you try to reload the file, the same thing happens. We still have over 9 Gig of space on the hard drive. I looked at preferences and did not see anyting that might work. Any ideas would be greatly appreciated. THANKS!

Hello and Welcome to Apple Discussions.
Well this is new on me but I'm going to suggest that you 'Repair Permissions' it's possible the underlying OS X file permissions have become corrupt preventing you from saving these files.
Go to: Macintosh HD > Applications > Utilities > Disk Utility. Click Macintosh HD on the left hand pane and then click the 'Repair Permissions' button just right off centre at the bottom of the window.
I'd also suggest re-starting the computer (some ppl never do) and this can cure many faults.
regards
mrtotes

Help needed regarding the client server communication

this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalita

Dear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita

Help needed Regarding a business logic

Hi all,
My business requirement is
requires to get a checksum from the KIOSK field. This would be something like a rule that for a given KIOSK generates a number from 0 to 9.
The Field value contains alphanumerical
Can any of guys help me in this logic.how to generate a checksum for a given field..
Thanks & Regards;
Vinit

Alright I found something I am not sure if it is of use to you , A checksum is generally used to detect the integrity of file
it is calculated oin basis of hash algorithms so how it is useful to for incoming filed values i m not sure
Please find the links below
http://en.wikipedia.org/wiki/Checksum
http://www.fastsum.com/support/online-help/checksums.php
http://www.flounder.com/checksum.htm
http://www.mkyong.com/java/how-to-generate-a-file-checksum-value-in-java/
If it is useful , you need to implement a hash algorithm
regards
Ninad

Help needed regarding SUM keyword in an ITAB loop

Hello,
I am maintaining a code as given below.
LOOP AT itab INTO totwa.
SUM.
ENDLOOP.
totwa is defined as a workarea which is needed to hold the sum totals of the fields in the itab. According to the documentation of SUM, it should calculate the sum totals and should put the totals in the workarea mentioned. But somehow its not calculating the value. Could anyone please help me in resolving this issue. Please guide me with your thoughts as to what might have gone wrong.
Note: the itab fields are of type P.
Thanks in advance
Sudha Naik

Hello Suha
According to the ABAP documentation the SUM statement is used in a specific situation:
Syntax
SUM. 
Effect 
The statement SUM can only be specified within a loop starting with LOOP, and is only considered within a AT-ENDAT control structure. Prerequisites for using the statement SUM include using the addition INTO in the LOOP statement, and that the specified work area wa is compatible with the row type of the internal table. In addition, SUM cannot be used when the row type of the internal table itab contains components that are tables. 
The statement SUM calculates the component total with the numeric data type ( i, p, f) of all rows in the current control level and assigns these to the components of the work area wa. In the control levels FIRST, LAST , and outside of an AT-ENDAT control structure, the system calculates the sum of numeric components of all rows in the internal table.
I hope the following sample report will clarify the use of SUM and COLLECT.
*& Report ZUS_SDN_COLLECT
REPORT zus_sdn_collect.
TYPES: BEGIN OF ty_s_line.
TYPES: key(1) TYPE n.
TYPES: value TYPE p DECIMALS 2.
TYPES: END OF ty_s_line.
TYPES: ty_t_itab TYPE STANDARD TABLE OF ty_s_line
 WITH DEFAULT KEY.
DATA:
gs_line TYPE ty_s_line,
gt_itab TYPE ty_t_itab,
gt_itab_coll TYPE ty_t_itab.
START-OF-SELECTION.
DO 3 TIMES.
 gs_line-key = syst-index.
 gs_line-value = syst-index * '2.3'.
 APPEND gs_line TO gt_itab.
 APPEND gs_line TO gt_itab.
ENDDO.
gs_line-key = 4.
gs_line-value = '5.5'.
APPEND gs_line TO gt_itab.
WRITE: / 'Initial list'.
LOOP AT gt_itab INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement with AT END OF'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 AT END OF key.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 ENDAT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (1)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (2)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 EXIT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement for total sum'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 gs_line-key = 0.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
END-OF-SELECTION.
Regards
Uwe

Help needed regarding Dynamic Programming

Hi,
While doing dynamic programming , we bind the context variable with two types of
values .
1 . ddic
2 . extern
My doubt is in which case we should use ddic and where to use extern .
Can anybody help me out regarding this.
Thanks a lot.

Hi Ki,
Predefined, Web Dynpro UI-specific, and user-defined Dictionary types all have the
prefix ddic:.
wdContext.getNodeInfo()
.addAttribute(
"Visibility",
"ddic:com.sap.ide.webdynpro.uielementdefinitions.Visbility")
Logical Dictionary types from Adaptive RFC models have the prefix extern:.
Check this links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9214b1e5-0601-0010-fdb0-ec32d43b06e0
/people/dipankar.saha3/blog/2007/05/31/how-to-create-dynamic-approval-process-using-conditional-loop-block-in-guided-procedure
Regards,
Mithu

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Help needed regarding iMac G3 model..

Similar Messages

Maybe you are looking for