Help needed regarding SAP SmartForms

Hi All,
I am looking for some input regarding SmartForms.
We have created SmartForms for the following:
Description
AR Invoice (Correspondence)
Default assignment: SAPScript
AR Credit Note (Correspondence)
Default assignment: SAPScript
AR Dunning Letter (Correspondence)
Default assignment: SAPScript
AP Remittance Advice
Default assignment: SAPScript or PDF
AP Cheque
Default assignment: SAPScript or PDF
In the configuration steps, itu2019s not possible to see the developed forms where as itu2019s active in transaction code smartforms.
· Is this means SmartForms canu2019t be assigned to the above functionalities?
· If possible, how do get listed in the above mentioned configuration step?
Appreciate if you can share your experience.
Thanks in advance.
Regards,
Krishna

Hi Raman,
visit this link
http://help.sap.com/saphelp_nw70/helpdata/en/32/a83942424dac04e10000000a1550b0/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c3/69bf4abf1045e0966badb60d6160dd/content.htm
Regards
Anup.

Similar Messages

Help needed regarding the updation of "Relationships" in BP

Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding Segment Qualifiers

Hi,
In my process of implementing Apps R12 afresh, we just created the segments and assigned them their flexfield qualifiers today. In that, the one assigned towards alancing segment shows the value qualifiers like that of natural accounting segment, unlike the bal. segment value qualifier.
I mean, when we try to insert a a value in the bal.segment it asks for qualifiers such as nature:expense/revenue/liability/asset, instead of going for the allow posting and allow budgeting alone. This is crazy, and I need your support.
Thanks,
Mukunthan L

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding font sizes

Iam generating pdf documents using oracle developer's report builder.
When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
Is there any parameters that has to be set for it.Pls help

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Regarding sap smartforms line items

hi,
this is regarding line items in sap smartforms
when i am executing single line item i am getting out put
when i am executing with 2 line items i am getting error like bellow
You tried to switch to the next table column, but no other column exists. The current column is 9. The line type IT_GEN contains only 9 columns.
plz explain clearly

Hi,
if you are using template and the line type is for 1 to 2 lines in the template... make sure that column position you mention is equal to the number of cells in the line type... if the data is displayed in the second row the row position should start from 2 and and column position should lie between 1 and 9.
Just a suggestion ... its better to go with table node instead of going with template...
regards
padma

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Help needed regarding BADI.

hi all,
can anyone plz tell me how to define BADI and how create an interface.
plz tell from everything regarding that, i have work with basic ABAP only.
anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
regards.
raman.

Hi Raman,
Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
The specified item was not found.
BADI
Best Regards.

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

Help needed regarding BADI in SAP-CRM 2007.

hi all,
i need some help regarding BADI for new creation and enhancement.
plz help, you will be rewarded accordingly.
regards.
raman.

Hi Raman,
visit this link
http://help.sap.com/saphelp_nw70/helpdata/en/32/a83942424dac04e10000000a1550b0/content.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c3/69bf4abf1045e0966badb60d6160dd/content.htm
Regards
Anup.

Help needed regarding 'Address Text' in Smartforms

hi guys,
To display the address text in Smartforms, we include an 'Address' component and provide the respective address number to it. I just want to know which is the table where the complete address text corresponding to the address number is saved. I have checked the 'ADRC' & 'ADRCT' tables but in vain. Help me out.
With regards,
Sandeep Panja.

Hi Panja,
In smartform u have to pass the address no and it's give the full address by FM ADDRESS_INTO_PRINTFORM .plz check this fm and for address check the master table like vendor the table is LFA1 to get the address for it
tarak

Help needed in SAP BO Implementation

Hi,
I am very new to SAP Business Objects.
I have a requirement to Install SAP BO on Windows environment or HP UNIX with integration to BI 7.0. When I read certain documents over the web, I am getting
confused with the requirement of MS SQL Server or Oracle Server for the BO installation.
We require the following applications in SAP BO
BusinessObjects Edge Series XI Release 3.1
Xcelsius Enterprise 2008
Live Office XI Release 3.1
Integration Kit for SAP Solutions XI Release 3.1
iView
Desktop Intelligence
Web Intelligence
Please help me in understanding the System Requirements (Server and Client), Software Requirements and the procedure of the SAP BO Installation. I have
currently added the following SAP Media to the download basket, please mention whether the following will be sufficient or will I have to make additional
requirements.
BOBJ XCELSIUS ENGAGE & ENTERPRISE 2008 WINDOWS (32B)
BOBJ XCELSIUS PRESENT 2008 WINDOWS (32B)
BOBJ INTEGRATION FOR SAP SOLUTIONS XI 3.1 WINDOWS
Integration Kit License Keys
Expecting your help.
Thank you
Regards,
Vineeth Damodar

Hello Wineth,
you will find a lot of Informationes to theese Questions here in the Forum.
Lets start with some Documents regarding the Requirements of Hardware and OS for your Edge installation.
Requirements Windows:
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/60cdb229-d874-2b10-18ac-ed2f46873753&overridelayout=true
Requirements HP-UX(IA64/PA-RISC):
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/00cfd8a7-d874-2b10-00bc-926c5793673d&overridelayout=true
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10f8b3bb-d874-2b10-7588-fb62836ac37f&overridelayout=true
Installation Documentation you will find under http://help.sap.com -> Choose "SAP BusinessObjects" -> "Choose "All Products" -> Select your Product -> Download your Guide
Regarding your Package you can de- select the Xcelsius Engage package. You need also the EDGE Instlallation Package.
Regards
-Seb.

Help needed for SAP Tables Relationships

Hi All,
I am new to ERP and need help regarding standard SAP Tables.
Please share the document that contains the details of SAP Tables and Standard SAP FM that are provided by SAP.
All helpful answers will be rewarded.
Regards,
Udaya.

Hi,
Please go to the following link.
http://www.erpgenie.com/abap/tables.htm
http://www.erpgenie.com/abap/tables_sd.htm
http://www.erpgenie.com/abap/tables_mm.htm
http://www.erpgenie.com/abap/tables_fi.htm
Regards
Jean

Help needed regarding the client server communication

this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalita

Dear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita

Help needed Regarding a business logic

Hi all,
My business requirement is
requires to get a checksum from the KIOSK field. This would be something like a rule that for a given KIOSK generates a number from 0 to 9.
The Field value contains alphanumerical
Can any of guys help me in this logic.how to generate a checksum for a given field..
Thanks & Regards;
Vinit

Alright I found something I am not sure if it is of use to you , A checksum is generally used to detect the integrity of file
it is calculated oin basis of hash algorithms so how it is useful to for incoming filed values i m not sure
Please find the links below
http://en.wikipedia.org/wiki/Checksum
http://www.fastsum.com/support/online-help/checksums.php
http://www.flounder.com/checksum.htm
http://www.mkyong.com/java/how-to-generate-a-file-checksum-value-in-java/
If it is useful , you need to implement a hash algorithm
regards
Ninad

Help needed regarding SUM keyword in an ITAB loop

Hello,
I am maintaining a code as given below.
LOOP AT itab INTO totwa.
SUM.
ENDLOOP.
totwa is defined as a workarea which is needed to hold the sum totals of the fields in the itab. According to the documentation of SUM, it should calculate the sum totals and should put the totals in the workarea mentioned. But somehow its not calculating the value. Could anyone please help me in resolving this issue. Please guide me with your thoughts as to what might have gone wrong.
Note: the itab fields are of type P.
Thanks in advance
Sudha Naik

Hello Suha
According to the ABAP documentation the SUM statement is used in a specific situation:
Syntax
SUM. 
Effect 
The statement SUM can only be specified within a loop starting with LOOP, and is only considered within a AT-ENDAT control structure. Prerequisites for using the statement SUM include using the addition INTO in the LOOP statement, and that the specified work area wa is compatible with the row type of the internal table. In addition, SUM cannot be used when the row type of the internal table itab contains components that are tables. 
The statement SUM calculates the component total with the numeric data type ( i, p, f) of all rows in the current control level and assigns these to the components of the work area wa. In the control levels FIRST, LAST , and outside of an AT-ENDAT control structure, the system calculates the sum of numeric components of all rows in the internal table.
I hope the following sample report will clarify the use of SUM and COLLECT.
*& Report ZUS_SDN_COLLECT
REPORT zus_sdn_collect.
TYPES: BEGIN OF ty_s_line.
TYPES: key(1) TYPE n.
TYPES: value TYPE p DECIMALS 2.
TYPES: END OF ty_s_line.
TYPES: ty_t_itab TYPE STANDARD TABLE OF ty_s_line
 WITH DEFAULT KEY.
DATA:
gs_line TYPE ty_s_line,
gt_itab TYPE ty_t_itab,
gt_itab_coll TYPE ty_t_itab.
START-OF-SELECTION.
DO 3 TIMES.
 gs_line-key = syst-index.
 gs_line-value = syst-index * '2.3'.
 APPEND gs_line TO gt_itab.
 APPEND gs_line TO gt_itab.
ENDDO.
gs_line-key = 4.
gs_line-value = '5.5'.
APPEND gs_line TO gt_itab.
WRITE: / 'Initial list'.
LOOP AT gt_itab INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement with AT END OF'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 AT END OF key.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 ENDAT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (1)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (2)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 EXIT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement for total sum'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 gs_line-key = 0.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
END-OF-SELECTION.
Regards
Uwe

Help needed regarding SAP SmartForms

Similar Messages

Maybe you are looking for