Help Needed, to choose...

Hi everyone.
I'm looking for the right computer that can solve my problems. Im gonna use the mac for Cubase and/or Logic, and it will proberly be audio files, multible layers, that it has to handle. WITH NO MISTAKES!
Which one to choose, I have been offered a MacBook 13", 512, 60 gb, Can this do the job? It has to be a laptop...
Many Regards, Daud Malik, Denmark.
Please write in simple english, because I don't understand the "computer language" very well...

I just got my Core 2 duo Macbook and it runs Logic Pro incredibly well. I pair it with a Line 6 KB37 and I can run it at 32 samples without glitches! 64 samples for heavy-duty plugins with very low audio CPU meter. It just works great. Much better than my Dual G5. I recommend getting the 2GB of RAM.

Similar Messages

  • Help needed with choosing container

    Hi
    I am writing a language editor ( english to native language). The editor would use the tranliteration. I need to make this both an application and an applet(for obvious reasons). Any suggestions on what container should be used? Any examples to look at?
    Thanks
    kris

    Just use the applet.When you want to make it an application just add the applet to the Frame's contentpane.
    Ranga.

  • Help needed for choosing Cisco recommended VM Backup solution for UCCE & CUCM 8.5

    Hi
    We are planning to install a reliable backup solution for our UCCE platform ( ESX(i) 4.x & 5.x  )
    if someone can share the details of Cisco recommended VM ware backup solution for UCCE 8.5 , it would be really helpful .
    Regards
    Renni John

    Hello,
    -    Snapshot procedure of VMs is not supported by Cisco for UCCE servers.  Please refer table "VMware Feature Support for Contact Center 8.0(2) through 10.x" on below link:
    o    http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#Supported_Editions_and_Features_of_VMware_vSphere_ESXi.2C_VMware_vCenter_and_VMware_vSphere_Client
    -    Same above link refers to use "Copy" feature of VM to take backup of servers, but it is a very lengthy procedure which requires extensive command line knowledge of UCS.  Moreover VM should be shut down for this procedure.   This can be used as one time backup of server; but cant be used as scheduled back up method.

  • I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
    Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
    Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
    Tom

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • Help needed in SAP BO Implementation

    Hi,
    I am very new to SAP Business Objects.
    I have a requirement to Install SAP BO on Windows environment or HP UNIX with integration to BI 7.0. When I read certain documents over the web, I am getting
    confused with the requirement of MS SQL Server or Oracle Server for the BO installation.
    We require the following applications in SAP BO 
    BusinessObjects Edge Series XI Release 3.1
    Xcelsius Enterprise 2008
    Live Office XI Release 3.1
    Integration Kit for SAP Solutions XI Release 3.1
    iView
    Desktop Intelligence
    Web Intelligence
    Please help me in understanding the System Requirements (Server and Client), Software Requirements and the procedure of the SAP BO Installation. I have
    currently added the following SAP Media to the download basket, please mention whether the following will be sufficient or will I have to make additional
    requirements.
    BOBJ XCELSIUS ENGAGE & ENTERPRISE 2008 WINDOWS (32B) 
    BOBJ XCELSIUS PRESENT 2008 WINDOWS (32B)
    BOBJ INTEGRATION FOR SAP SOLUTIONS XI 3.1 WINDOWS
    Integration Kit License Keys
    Expecting your help.
    Thank you
    Regards,
    Vineeth Damodar

    Hello Wineth,
    you will find a lot of Informationes to theese Questions here in the Forum.
    Lets start with some Documents regarding the Requirements of Hardware and OS for your Edge installation.
    Requirements Windows:
    https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/60cdb229-d874-2b10-18ac-ed2f46873753&overridelayout=true
    Requirements HP-UX(IA64/PA-RISC):
    https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/00cfd8a7-d874-2b10-00bc-926c5793673d&overridelayout=true
    https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10f8b3bb-d874-2b10-7588-fb62836ac37f&overridelayout=true
    Installation Documentation you will find under http://help.sap.com -> Choose "SAP BusinessObjects" -> "Choose "All Products" -> Select your Product -> Download your Guide
    Regarding your Package you can de- select the Xcelsius Engage package. You need also the EDGE Instlallation Package.
    Regards
    -Seb.

  • Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

    Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
    System: Windows 7
    Adobe CS5
    Printer: Epson Stylus Photo 1400
    Paper: Inkjet matte presentation paper with slight luster
    Installed latest patch for Adobe CS5
    Epson driver up to date
    After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
    The files I am printing are photographs of dogs with lots of detail  I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
    My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
    Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
    When I change to these settings in printer window: Color Handling:  Printer manages color.  Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
    Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
    Also I am confused as to what ICM color management system to use with this printer and CS5:
    What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
    Do I embed the ICM I choose into the new files I create? 
    Do I view all files in the CS5 workspace in this default ICM?
    Do I set my monitor setting to the same ICM?
    If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
    Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
    Is using the same ICM for all devices what is called a consistent workflow?
    I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

    It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
    I hope this may help...............

  • Very Urgent Help needed - Arabic support in  Forms6i& reports6i

    Hi,
    Its a very very very urgent requirement.
    How to Provide the arabic support in forms .
    I am working on Windows Xp operating system.
    1. How to Configure the Windows XP Operating system to provide arabic support?
    In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
    1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
    choose for saudi arabic?
    2.How to install forms & Reports with arabic support?
    3.How to dispaly the data in both english and arabic in forms and reports during runtime?
    I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
    very urgent.
    Regds,
    B.Prasad
    [email protected]

    Badma,
    1. How to Configure the Windows XP Operating system to
    provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
    1. How to configure the oracle 8i/9i databases to provide
    both arabic and english? what characterset i need to
    choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
    2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
    3.How to dispaly the data in both english and arabic in
    forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
    Hope this helps.
    Regards,
    - Makoto

  • Help Needed - Even after lodging "Presidential Complaint"

    Help needed please!!To make a long story short I have been through nothing but aggravation the past week trying to get my phone working. Service call on 7/6 to install Fios Internet, TV and phone. Internet and TV work fine, but Phone has no dial tone, going on a week and a half now. Tried contacting the account rep who set up my account, her supervisor as well as tech support on numerous occassions. 
    They set a dispatch for yesterday, and when the tech called me to say he was here, he was at an address i moved out of 4 years ago, in another state.I get a call from someone saying the service request was being closed and I need to call in with the correct address, after telling that rep I would not do that, that Verizon should make the updates based on my TV/Internet records, she hung up on me. Called back into Tech Support and the best they could do was an appointment for tomorrow. I then called the Corporate number and spoke with someone who opened a "Presidential Complaint" and requested an expedited call.. well i have heard nothing since then other than an automated call earlier today sayin my original service request will be kept. Needless to say I'm very upset that after a week and a half I still have no phone service and it doesn't seem like anyone is real willing to help me. I'm sure I'll get billed in full even though one of the 3 services I'm paying for hasn't been working in a week and a half.. 

    Hi jkoen77,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Help needed after moving music - has not been answered recently!

    Hey,
    I'm not great with computers. I moved my "my music" folder to an external hard drive (just cut and paste... oops) and now itunes won't open because it can't find the itunes folder. It won't let me uninstall or reinstall it. Help needed!
    Thanks

    If I understand correctly, you moved your My Music folder on to an extrenal drive and that this folder contained your iTunes folder. Now Itunes won't open. I hope you have not damaged anything by unsuccessfully trying to uninstall iTunes, if so we will have to fix that.
    If you are lucky and I have understood you correctly, start iTunes with the shift key held down. You should be prompted to choose or create a library. Select choose and navigate to your iTunes folder on the external drive. You should find a file called iTunes Library.itl - choose that.
    Message was edited by: polydorus

  • Recovering windows XP -Urgent help needed

    I am new to Toshiba. I hav a 60 GB hard disk with no partition and windows XP home installed. I want to partition the hard disk now. Now after formatting the hard disk do i lose Windows XP HE completely or is there chance to recover it and reinstall it. Urgent help needed.

    Hi
    You can reinstall your notebook using Recovery CD. It is easiest and fastest way to reinstall OS, all necessary drivers and tools. Put Recovery CD into DVD-ROM, start notebook and press down C button. At the beginning there is choice between two kinds of installation (Standard mode and expert mode).
    If you choose the first one whole HDD will be formatted and used for OS installation. With second one (expert mode) it is possible to install OS on first partition. It is also possible to define how big the partition should be.
    Try it. It is very simple to do it.
    Good luck

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

Maybe you are looking for