HELP: No Custom Column Views in On My Mac Mailboxes?

Hello. I'm in the process of changing over from Entourage to Apple's Mail and have set up a couple "On My Mac" Mailboxes to hold archived e-mails from my Inbox and Sent folders.
Ideally I would like my Inbox archive to list From information, and my Sent archive to show To information, but if I change the viewable columns in one mailbox it changes all of the others too, and there doesn't seem to be a way for it to intelligently know that one folder is incoming / the other outgoing. I currently have it set up to show both To and From, but that ends up being wasted space in either.
This is either bad UI or I just don't know what the **** I'm doing (hoping it's the later).
Any help appreciated or to just let me know, "Yes Brad, you're screwed." Thanks.

Brad,
In Mail Help and in Support the following is available:
http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml970.html
where the final paragraph provides the answer. Only in any Sent mailbox that Mail creates, can the column for To get switched from that for From.
Ernie

Similar Messages

Need help with custom column in BI Publisher

Hi Guru's
I have started working with BI Publisher Recently and need with below issue
Can you please let me know how can i create a custom column like % based on two existing measures in the report
I tried creating it in obiee report and used that SQL to create BI Publisher Report , but the result column in obiee is not working as expected in BI Publisher,
can some one please help me with this
Thanks a lot in advance.

This column can be calculated in BIP RTF template. But if it is a column inside a FOR-loop
then it may need to be calculated slightly different.
Like I said, get the xml data and rtf then send it to me : [email protected]
and will get it fixed for you.
thanks
Jorge

Custom column in a list view web part for a multilingual site does not take on custom language labels. Stays in default language.

Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.

Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1.   Create the variants in the Site Ccollection
2.   Create the library outside of the variants.
3.   Add all the columns you require for the library. It is very important all the columns are there before you move on.
4.   Create a French and English view.
5.   Create the list view web part via designer.
6.   Add the list view web part to each site selecting the appropriate view to use.
7.      Edit the page in SharePoint Designer 2010.
8.      Place cursor in the column you wish to modify.
9.      Click Design in the List View Tools on the ribbon.
10.     Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11.     You are looking for a piece that resembles the following:
        <xsl:with-param name="fieldtitle">
          <xsl:value-of select="@DisplayName"/>
        </xsl:with-param>
12.      Modify it by typing in the actual column name you want. You should end up with something like this:
        <xsl:with-param name="fieldtitle">
          New Column Name.
        </xsl:with-param>
13.      Now, for this page only, the column will be renamed.
There are some caveats:
1.   Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2.   If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had.

Custom column in List view

Dear guru's,
I'd like to ask you if its possible to add custom column in list view. For example in tc. FBL1N I'd like to add a column with custom text (for example with value "1" for counting the sum of rows). Is it possible to do without creating custom program?
Thank you all.
Regards.
Michael.

Hi Michael,
It's not possible to add some extra text in standard out-put without modifying it or creating custom program.
For adding a column in your list view. I think this write statement will help you
WRITE 'You can overwrite the following line:'.
FORMAT INPUT ON INTENSIFIED OFF.
WRITE 'WRITE HERE'.
FORMAT INPUT OFF INTENSIFIED ON.

Addition of a custom column in a table view

Hi all,
I want to add a custom column in a table view. Kindly tell me if this is possible.
Regards,
Vivek Pandey

Hi Vivek,
This can definately be done....you will have to declare and iterator and in the GET_COLUMN_DEFINITIONS, declare the column name....
Referr to blogs :
<a href="/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator Basics</a>
and
<a href="/people/thomas.jung3/blog/2004/09/15/bsp-150-a-developer146s-journal-part-xi--table-view-iterators Iterator.</a>
The second blog shows how to insert a icon, which is an extra column...
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Is there an easy view of assigned Retention Tags in main view of Messages, e.g. a custom column?

Hi,
I have a requiement to have an easy/overall view of assigned Retention Policy tags against a list of messages in outlook 2010.
I envisage that if there was a column in the main message list view, that showed the assigned tag against each message and that could be sorted, e.g. so I can see what has an assigned tag (and what it is) and what doesn't, this would hit the mark perfectly.
Any such capability?
Can I create a custom column that extracts a message property to do this?
If so, how?
Thanks! David.

Hi Greg,
Sorry it's been a couple of days, it's been busy.
Unfortunately not. I raised it with our devs to take a look at. I was initially after an assessment of effort. But they were quoting me a number of days effort just to get to the point of being able to tell me how long it would take. At that point I
pulled it, as it wasn't a must-have requirement.
Still, it would have been nice.
To extract such a property, I might imagine an Outlook plug-in to extract the data from the property and watchers to look out for changes in various circumstances. In this way if you can get the data into a new Custom Message Property, a Column
will readily display it. It feels a little over-engineered and duplicates the data just to get it into a place to show it.
Maybe there are easier ways. But no, I didn't make progress.
All the best. Ta, /David.

Custom column added is not available for Calendar list view in SharePoint 2010

I created a custome column "Breakline" in a custom content type 'SM event", and applied the content type to a Calendar.
The column is listed under the content type "SM event" but it is not listed when I tried to modify the view using the "Breakline" column.
Does anyone know why?

I set "Breakline" hidden because I don't want to show this in create new item form.
I realized that may be the reason. So changed the column to Optional in CT and created a new calendar using that CT. then at list level CT I changed it to Hidden. That works. The column is available for use when modifying view.
Thanks

Hiding custom column in Weekly view of the Time Entry in ESS

We have added a custom field to time entry (CAT2). This field is displaying in both (weekly and daily) view of the time entry screen in ESS. Our requirement is too display the field only in daily view.
Is there a way to hide the custom column in the weekly view of the time sheet in ESS?
Thank you,
Rohit

well it would require modification to the iview , it wont be a easy quickfix cause you lauch the iview it is built using CAC2 field customisation
you can explore Personalisation for the daily view hope it can work!

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

Hi Ron,
Highlight one in the Finder & do as Get Info on it, what does open With say to use?
What did you update 10.8.2 from exactly? 10.6.8 maybe?

Add custom column in default list view in sharepoint

Hello,
How to add custom column in default list view in SharePoint 2013? In list view we have view fields section. But its not allowing to add any static text. I want to add one button/textin view fields. How to add that?
<View Name="{C7499466-A865-4742-8511-5536D2521D1C}" MobileView="TRUE" Type="HTML" Hidden="TRUE" DisplayName="All Documents" Url="/SectionManagement/SitePages/Untitled_1.aspx" Level="1"
BaseViewID="1" ContentTypeID="0x" ImageUrl="/_layouts/15/images/dlicon.png?rev=23" ><Query/>
<ViewFields>
<FieldRef Name="LinkFilename"/>
<FieldRef Name="LinkFilenameNoMenu"/>
</ViewFields>

Hi,
to add a field to a view use this
<ViewFields>
<FieldRef Name="LinkFilename"/>
<FieldRef Name="LinkFilenameNoMenu"/>
<FieldRef Name=[InternalNameOfCustomField]/>
</ViewFields>

Custom Folder View w/ Movable Columns

Question1:
=======
I created very simple custom folder view. How can I make my custome folder view to display Movable Columns?
When adding elements into Folder View, the section Standard Form Elements does contain only the element Discussion Folder (Standard View), no movable columns
I need in my custom folder view movable columns, Heeeeeeeeelp!!
Question2:
=======
In Folder Options in Configure Columns, one can choose what columns of an entry to display.
I found the order of chosen columns inconsistent.
Is there a way how to specify the order of the chosen columns?

1. When in the folder, click on Manage > Configure. Do you not see an option for selecting the default folder view?
2. No, currently there is no way to specify the column order.
-- Khurram

Adding custom column to Process tracking view

I have a requirement that in process tracking screen, some custom column (e.g instruction) should be added so that different processes listed there can easily be differentiated.
I tried to do this change in Workspace through Preferences->Manage Column Headings -> Tracking. But it affects only the Tasks view (Audit tab) for the process and not the initial process tracking screen. I also tried creating a process variable and made it Visible in UI and Searchable so that it is shown in the column heading list. But still that heading does not show up in the initial process tracking screen.
Is there way through which we may be able to customize the column headers for the initial tracking screen?
(The server is Livecycle 8.0.1)
Thanks,
Ashutosh

Not that I'm aware of.
However, we have built an enhanced tracking and enquiry tool that provides a lot more flexibility than the built-in tracking, and is also very easy to configure.
Read about it: http://www.avoka.com/avoka/enquirytool.shtml
Try it: http://www.avoka.com/apps/checkcookie?location=/apps/qpacdownload&qpac=y&qpac_code=Worksp aceEnquiryTool1.8
Howard
http://www.avoka.com

Digital Publishing Suite Help | Creating custom viewer apps for the iPad and iPhone

This question was posted in response to the following article: http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

The Approval Status section is no longer in DPS App Builder, but this reference wasn't removed. You can submit your app to the gallery using this form:
https://adobeformscentral.com/?f=ozjJFvlBionBofBtd-wjbQ#

Custom Column for Project Code Number & Search Box to search Content in Project Server 2013

Hi all,
I want to add a custom column in Project Center view for showing some Numerical Projects codes like 4523, 5248,8956 like that... Each code will represent Project assigned with that code in Project Server 2013. Also let me now if i can add some search box
in Project Center page through which i can search Project Code or Project Name. Currently, provided search bar not working in Project Server 2013.
Need it urgent..Kindly help

Hi,
If you want to add this column in a project center view, be careful to choose a project view in the "manage views" views' list. Also it must be a project custom field and not a task field. As Paul said, we assume that the field with the code exists
and has been previousky created by you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Custom columns in task list

Hello,
I'd like to ask your help with a problem concerning the task list page.
For each task I have some additional data stored in a remote database, I use the "task number" for the join. What I'd like to do is:
- show these extra values in the task list in new, custom columns
- give the user the ability to filter and sort by the new columns
Could you give me some ideas to get me started? Should I dig deep into the "TaskList" servlet and somehow extend the column set and add the values to the tasks using JDBC? Is this goal achievable at all??
Any help will be much appreciated,
Denes Toth

Hello again bnainani,
I tried to define a flex field mapping and display it in the task list. Creating the mapping went fine, but I couldn't select the new column ("label") when creating a custom view to display the flex field data.
The Developer's Guide sais "A mapped payload attribute can also be displayed as a column in a custom view, and used as a filter condition in both custom views and workflow rules.". But how van I achieve this? The flex field label is not displayed in the available columns dropdown when selecting the columns of the view.
What am I missing?
Once again, thanks for any help in advance...

HELP: No Custom Column Views in On My Mac Mailboxes?

Similar Messages

Maybe you are looking for