Help on Asset Depreciation Calculation BADI

Hello Gurus.
I'm using the Business Add In BADI_FIAA_DOCLINES to change the way SAP calculates the depreciation amount for an asset in transaction AFAB.
The customer needs to compute it based on PP information. I already have everything, but in that BADI there is a field missing. I need the number of the asset that is being depreciated, and it should be stored in the structure IS_RLAMBU and the tables IT_ANEPI and CT_ACCIT.
However, all I can see is an empty field, or, in the best case simply I see a * sign.
I hope I was clear, and I thank you in advance for your valuable help.
Reward points will be granted to helpful answers =)
Sinuhe.

You need to change depreciation key to use approriate Base Value method (with X,Y,Z, indicator).

Similar Messages

  • Asset Depreciation calculation BADI implementation

    Hi Experts,
    We have a specific requirement for calculation of rapid depreciation in assets. When a change process(termination) is run in CRM side it creates an asset on ECC which has to be depreciated rapidly.
    We have to cumulate the values of billplan and post it as depreciation amount for depr. area 01 to which special depr. key is assigned.
    I have activated implementation of BADI FAA_EE_CUSTOMER ( method SET_PERCENT_AMOUNT).
    The problem is when i put a breakpoint in this method and run test depreciation ( txn. AFAB ) it doesn't even come to the break-point.
    Is there something I am missing in this enhancment. Please suggest.

    You need to change depreciation key to use approriate Base Value method (with X,Y,Z, indicator).

  • Asset depreciation calculation for prevous year  when legacy data transfere

    Hello,
    Asset Legacy Data transfer has made as on 31.12.2006. so, for the first period asset depreciation calculation has done wrongly  i.e. on the first period of 2007. but it was not noticed at that point of time, now after 2 years, the cumulative difference is coming out very big.
    for 1st period, in Asset Value Tab of AS03,  for period 01 , 2007 when i am checking right now it shows for dep. Area 01 right now that Amt to be post (14.48) instead of that in the next line for Dep. area 20 and in the next line it shows, Amt. to be posted ( -0.28). hence, for next period only differnce amount is posted in G/L side instead of actual it should be posted as 14.76.
    so, now because of this error, my G/L and AA sides are not matching up.
    eventhough i post manual reversal entry via FB01, when i will run ABST2 there will be problem.
    if i run manual unplanned depreciation, then will my problem of not matching of Asset side and GL side will be solved. ?
    also, please provide suggestion from your end in order to solve this issue.
    Thanking you for your help.
    Jigs.

    We cannot post any depreciation to previous fiscal year 2008 as no planned depreciation is envisaged for the previous year 2008. The transfer date for Legacy asset data transfer is maintained as 12/31/2008 and takeover values are uploaded accordingly. Hence, 2009 is a first year for Asset Accounting of the company code.
    However, Depreciation posting program checks for previous period log while executing for the current period. The logs are stored in u201CTABAu201D table. For new company code there will not be any entries in TABA table.
    Due to missing functionality, System is checking for previous year depreciation posting logs even though the current fiscal year is first year for planned depreciation and giving error message AA 687.
    As per SAP Note 144441 this error can be rectified with the help of correction program ZACORR_TABA_ENTRY_CREATE.
    Steps to Rectify the Error:
    1. Copy correction program from SAP Note 144441 into SAP System.
    2. Execute the program with transaction code SA38
    3. Check the values in test mode
    4. If the table is updated with documennt number , remove the test mode tick and execute again
    5. Execute the deprecation
    Edited by: Ramesh Reddy Nalamada on Jul 25, 2009 1:17 AM

  • This is regarding Asset Depreciation Calculation

    Dear All,
                       I had doubt regarding Asset depreciation calculation.If i want to Dpreciate the Total Asset value Upto 95% and 5% is scrap value ,where do we configure this setting in SAP Asset Module.
    Thanks & Regards,
    Prasanna.M

    Hi,
    You can achieve this by either scrap value / memo value in your depreciation area.
    Go to AS02, go to dep area tab, double click on depreciation area and in detail section enter the scrap value percentage or value. This procedure is only possible, if scrap value maintainance is allowed at main asset and sub asset number in AO21.
    This will resolve your issue.
    Thanks,
    Srinu

  • Asset Depreciation Calculation when Fiscal Year are Different

    Hi,
    The client reporting company is in US and the company code is maintained with K4 fiscal year varient. (for common controlling area).
    Though the India entity follow K4, their depreciation calculation are based on V3 (April to March).  The real depreciation for their postings is based on their April to March calculations.  The depreciation is calculated on the WDV method and the net assets are calculated on the end balances of December where as it should be the April of previous year.  the eg. is
                                       Correct Calculation (Requirement)          SAP Calculation          
    Acquisition Value                                                33000.00     
    Accumulated Depre.                                                     14680.00     
    Net Asset Value - As On 1st April 2009          18320.00     
    Net Asset Value As On Dec 31st 2009          16400.04
    Depreciation Key     OS01     13.91%          OS01     13.91%     
    Depreciation Per Day     6.98               6.98          
    Net Asset Value - As On 1st April 2009          18320.00               18320.00     
    April'09     30     209.45          30     209.45     
    May'09     31     216.43          31     216.43     
    June'09     30     209.45          30     209.45     
    July'09     31     216.43          31     216.43     
    Aug'09     31     216.43          31     216.43     
    Sepr'09     30     209.45          30     209.45     
    Oct'09     31     216.43          31     216.43     
    Nov'09     30     209.45          30     209.45     
    Dec'09     31     216.43     1920     31     216.43     1920
    Net Asset Value as on Dec 31st 2009          16400.04          6.25     16400.04     
    Depre for Jan'10     31     216.43          31     193.75     
    Feb'10     28     195.49          28     175.00     
    Mar'10     31     216.43     628.35     31     193.75     562.50
    Net Asset Value as on Marc 31st 2010          15771.69     2548.31          15837.54     2482.46
    There are some BADI and user exit which determines my base value for depreciation calculation.  Should we have to use that or any standard solutions are available for this.
    Please let me know.
    Chandrashekar S A

    Wrong topic I think

  • Asset depreciation calculation based on net book value adjustment

    currently I have one asset depreciated based on acquisition value, I want to depreciate using netbook value starting from May,
    thus May and afterwards depreciation should be 61107 USD.
    but accountant forget this and depreciate asset in May with amount 54628. the June planned depreciation is still based on Acquisition value, i.e. 61150.
    So how to adjust June depreciation, if I create a new depreciation key with multi-method based on NBV and change asset master,
    will this solve problem?
    how to adjust May posting since it is already posted? thanks

    Thank you for the reply.
    But The issue here is I changed the depreciation key based on NBV, but planned depreciation still based on acquisition value for the following months. by the way, OAYR is monthly depreciation. I didn't tick the smoothing, I think this will affect whole company code. I only want to change the depreciation key based on NBV for three assets only, the rest of assets still using Acquistion value depreciation.
    I do test in a sand box, now the latest posted depreciation is April, original depreciation key is Z001 (based on Acquisition value),
    I changed the depreciation key to Z002(based on NBV), in AS03, I can see the planned depreciation for May is still 61150(based on Acquisition value). I run AFAB, (test run), the result is same.
    My objective is let May and subsequent months  planned depreciation to be 61107 based on NBV of April.
    Simply change the depreciation key doesn't work at all, anyone have the solution, which other fields in asset master I need to change? or do i need other configuration? thanks

  • Asset Depreciation calculations

    Hi Gurus,
    Can any one tell me the How can I configuration for the calculation of asset Tax depreciation. Dep.method is declining method. Eg. The asset useful life is 4 yrs.  Client would like to calculate depreciation for first yrs one ration of dep. then from 4th year he would like to change dep ration the NBV should be 1JPY.  Financial year Feb to Jan
    Example
    Cost JPY100,000
    Useful life 4 yr = ratio 0.625
    acquisition month  Feb2008
    guranteed dep ratio 0.05274
    revised dep ratio 1
    Can any one help in this regards,
    Thanks,
    Pavan

    Sorry my apologies a small correction.
    You can determine the asset value date based on rules:
    these rules are defined in configuration.
    asset accounting >transactions> specify how default asset value date is determined.
    great config..SAP is great..
    Regards
    anantha

  • Depreciation calculation for Indian Tax Depreciation Area - Fixed Assets

    Can any one of you kindly advice how to setup the Multi levels methods and Period controls for Tax Depreciation key in Indian Tax Depreciation area.
    My Leading ledger Fiscal year: Jan u2013 Dec (Year dependend)
    And Non-leading ledger (India) Fiscal year: April u2013 March (Year dependend)
    I was able to post correct depreciation for leading and non-leading ledger Depreciation areas with a stated percentage. But the calculation of Tax depreciation area is incorrect.
    As per client requirement, Tax depreciation area is setup only reporting purpose and no Depreciation posting.
    Required Depreciation Calculation for Tax Depreciation Area:
    For Acquires & Additions,
    Rule1:
    If it is >=180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation as stated percentage. Eg: 10%
    Rule2:
    If it is <180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation of 50% on stated percentage. Eg: Stated percentage is 10%, then it should be 5%.
    Early responses will be appreciated.
    Thanks much for the help.
    Regards,
    Bapu

    Hi JBC,
    please search this Forum, I think basic questions about Indian tax depreciation have been asked dozen of times in this Forum here. You should find some answers in earlier threads.
    Regards,
    Markus

  • Config of Group assets - Tax Depreciation Calculation : India

    Dear Seniors,
    can you please explain the configuration of the Group assets and how exactly the tax depreciation calculation in India happens for the individual assets with scheme of entries.
    Thanks and Regards
    Sathish

    Hi,
    In India, depreciation on assets for the purpose of computation of net income as per the Income Tax (IT) Act 1961 is calculated over a block of assets instead of individual assets as allowed under the Companies Act 1956. Asset acquisitions and retirements are managed over the block level. The IT Act prescribes certain rates of depreciation to be used under the Written down Value (WDV) method over these asset blocks to compute depreciation.
    The following are the customization settings that may be followed in the R/3 system in order to manage your assets in the income tax depreciation area.
    1. Copy the standard chart of depreciation 0IN as provided by SAP and create your own chart of depreciation.
    2. Use the depreciation area 15 for the purpose of management of assets under the IT Act. Make it statistical in nature. (Reference Transaction Code: OADB). Do not check the box negative net book value.
    3. Specify that the Income Tax depreciation area takes over the APC from the book but not make it identical (Reference Transaction Code: OABC).
    4. Create an asset class for the purpose of income tax blocks. This asset class will be used to create only group assets. (Reference Transaction Code:  OAOA)
    5. Specify that the depreciation area for income tax can be managed only for group assets. (Reference Transaction Code: OAYM). This would mean that depreciation for this depreciation area would be computed only at group asset level.
    6. Specify that the asset class defined in (b) above will be used for creating group assets only. (Reference Transaction Code: OAAX)
    7. Two period control methods (IT and NL) have been defined in the system for determination of start or the end of depreciation calculation at the time of a fixed asset acquisition or retirement. You may use these period control methods while creating the depreciation keys for the purpose of IT depreciation.
    Calendar assignments have been made for the above mentioned period control methods in order to reflect valuation requirements as per the Income Tax Act (Transaction Code: OAVH). You may create your own period control methods depending on the fiscal year variant you use. The period control methods supplied are based on the fiscal year variant V3.
    8. Depreciation Keys: The following depreciation keys have been created in the system. They correspond to the income tax blocks that are prescribed under Indian tax laws. They are as below:
    Depreciation Keys:
    1. IN1 - Tax Depreciation - 5% -
    I Hope it will give you some basic guidance.
    Regards,
    Krishna Kishore

  • Asset depreciation posting via interface

    Hello,
    My client would like to use WBS elements as investment measures to bring capital projects through WIP and capitalize to FXA's.  However, they want to maintain an external asset accounting system as the system of record for depreciation, write ups, write downs, etc.  Our system will receive these postings via interface.
    They would also like to record depreciation of a single FXA to various WBS elements based upon a crosswalk from the asset accounting system.  I am trying to find a way to make multiple JV's to post this,
    Dr Depreciation expense, key 40 - WBS
    CR Accumulated Depreciation, key 75 - FXA. 
    Thus, FI-AA's manual depreciation and unplanned depreciation transactions will not meet this requirement as far as I can tell. 
    I have been trying to make ABF1 or FB01 work.  ABF1 will allow for this posting, however, I am not able to select the individual asset on the credit line.  Is this a screen layout configurable item?  FB01 will not allow a depreciation transaction type to be used in the transaction at all. 
    Can anyone help with this?
    Thanks,
    John

    To be frank, any solution that is built around something like ABF1 should be reconsidered.  I'm all for delivering creative solutions when required to but wouldn't propose something like that to a customer...  at least not without a "you'll get no support from SAP on something like this".  Since the external system will track all of the asset's depreciation calculations and value adjustments, why not just post a simple FI document using a BADI?  Why muck it up with ABF1?  It would seem that if they accept the fact that they are leaving SAP then they are leaving behind some integration benefits as well.  Trying to regain those benefits by posting to a recon account and (hopefully) maintaining a reconciled set of books between the GL and FIAA isn't logical to me.
    Posting costs to a series of CO objects is the job of CO.  You might be able to come up with a solution using FI-AA but I would expect more problems related to document creation as you have already found.  Just post it to a high level WBS/IO and then allocate using whatever logic they require.  At least you'll have the tools to do so within CO.
    -nathan

  • Depreciation calculation

    Dear All,
    Our depreciation policy is to depreciate asset from the day of purchase till the day of sale (day of disposal is also included).We are following daily convention basis for 365 days i.e the depreciation is calculated on daily basis with straigh line method.Now we are facing issue system is not calculating the depreciation on the day of disposal otherwise all depreciation calculation is correct please suggest in this regard.
    Regards
    Naveed

    The problem with the @SLN function is that it only works across the dimension tagged as "Time". Planning apps typically have a separate year and period dimension, so this function doesn't help us much. You basically have to create your own depreciation calculation.
    To do this, create a moving sum using the @MOVSUMX function (using the TRAILSUM option). Then divide this moving sum with the depreciable periods (which will obviously vary by asset class).
    You can only do this for "new" assets. Most fixed assets systems can feed you the projected (future) depreciation on "existing" assets. Then you can add your depreciation on new assets (that you've just calculated) to your depreciation to existing assets to get total depreciation.
    Hope this helps,
    - Jake

  • Depreciation calculation error

    hi experts,
    i need to calculate the depreciation for an asset for 365 day, but it is calculating for 335 days only,when i click on depreciation calculation in  AW01N,there it is showing that depreciation periods is 366/335;
    why it is showing like that,y it is calculating for 335 days only,where i need to check and clarify the error
    thanks & regards
    suman.b
    Edited by: sumanchinna on Sep 30, 2011 2:06 PM

    hi there,
    its probably because the date you are giving is i.e 12/26/2007 and because its a mid period calculation, based on the yr defined for that compcode after the first 15 days it calculating as next months which is 01/01/2008 ie going into next yr which is not open.
    hope it helps..if it is then please assign points
    regards
    Jay

  • Question on asset depreciation

    Hi experts,
    I have no knowledge on asset depreciaction. I need to know how asset depreciation is calculated like example what are the formula to calculate it, what is the tranx code that I can use or what configuration that need to be set.
    One example, I have a piece of asset. I need to calculate the depreciation of this asset from today until the end of the year. How can I do so?
    All kind of help is greatly appreciated. Thanks in advance.

    Hi,
    Please refer to link...
    finding the Transaction code of depreciation calculation (asset accounting)
    [Search link|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=asset+depreciation&adv=false&sortby=cm_rnd_rankvalue]
    Edited by: Avinash Kodarapu on Jan 16, 2009 8:52 AM

  • Asset depreciation block

    HI
    Is it possible to stop depreciation some of the assets under one particular asset class?
    can any one  help me
    Thanks & Regards
    phaneendra
    Edited by: phaneendra Reddy on May 6, 2009 8:18 AM

    Hi
    Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
    In asset master data
    Go to time dependent terms,
    Define the appropriate time interval for shutdown
    Set the shutdown indicator
    The system does not calculate the depreciation for the shut down period,
    The useful life of the asset will increase to the extent of shutdown period.
    When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
    Regards
    Tanmoy

  • Asset Depreciation - Depreciation to the date + Percentage from useful life

    Hi Asset Accounting Experts,
    I have a business requirement for depreciation as follows in depreciation calculation.
    Aquisition Month    : Depreciation to the date
    remaining Months   : Straight Line Depreciation - Ordinary: percentage from useful life
    Retirement Month   : Depreciation To the date
    Eg: Aquisition value = 12000     Useful Life 10 years  i.e Depreciation per month 100
    Asset Aquired in 20.01.2009 (Period 1)
    Retired in 12.04.2009 (Period 4)
    Depreciation should post as follows
    Period 1 - 100*11/31 =   35.48
    Period 2 -                      100.00
    Period 3 -                      100.00
    Period 4 -  100*12/30 =   40.00
    I would really greatful if someone can help me on this.
    Thanks in advance.
    Chandimal

    Hi,
    You can define this in your depreciation key.
    Check depreciation to day check box. System will calculate the depreciation from date of capitalization if you have define multilevel method , depreciation from capitalisation date. Also choose base method depreciation from useful life. Define life in Asset master , post the entry and check the depreciation behaviour.
    Check with this system will post the depreciation as per your requirement.
    Regards
    pankaj Pandey

Maybe you are looking for

  • INSPECTION LOT-TO AVOID LOT CREATION DURING OF ORDER

    Hi GURUS, We have created an order for 10 MT,did confirmation for 2 MT,a Q.M lot was created.Now for the rest of 8 Qty we donot want to create Q.M lot while doing confirmation as the result for the rest of the is same. We have maintained the follow s

  • Report Server URL page can't be displayed.

    So we attempted to upgrade sql 2012 to sql 2014 for SCCM. Upon doing so this broke reporting services.  My dbadmin reverted back to sql 2012 and now we cant get reporting services at all to work.  The issue started when he went to upgrade sql and it

  • Forte Web Enterprise question

    Hello all, I'm experiencing a problem passing variables from JavaScript to the Forte backend. I am using the following function in my html document. <DEFANGED_script language="JavaScript"> <!-- function OpenPage(pAccNo,pSrcCode,pExpType) // this is j

  • Power consuption  report (pm)

    hi my requirement is to show the power consumption of each generator we have 4 . and also the difference. a b b-a ex : 1.07.2011 is starting reading of that month (.this is a) .        for 2.07.2011 it should subtract with 1.07.2011 (this is b)      

  • Large number of event Log entries: connection open...

    Hi, I am seeing a large number of entries in the event log of the type: 21:49:17, 11 Mar. IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.78:14312 <-->86.128.58.172:14312 [81.154.101.160:51163] CLOSED/TIME_WAIT ppp0 NAPT) 21:49:15,