Help on sheduling conditional Job using dbms_sheduler.

Oracle experts,
I verified oracle docs to schedule a conditional job based on my requirement but I did not figure it out how to implement this. Please provide me some ideas to do this.
My requirement as follows:
The job needs to be configured to run on 1 st of Jan,Apr,Jul, Oct at 9am central.
Conditions are as follows:
1)If the yr_close_day from the 'table_x' is yesterday then wait for a day and run ( When Quarter=4).
2)If the day of the week is Sunday then wait for a day and run(when Quarter != 4).
Thanks in Advance.
Anan.
Edited by: Anan Bathi on May 22, 2012 6:43 AM

IMO, you cannot schedule a job like that.
But you can write a procedure with all these conditions and if condition satisfies perform action and other wise donot.
and schedule a job in regular interval.
like your procedure can contain
create procedure p as
begin
if <condition> then -- what ever you have specified in question.
---action
end if;
end;
and action as p for your job.

Similar Messages

  • Help Required Regarding - SAP Job names using R3 data flows

    We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
    There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
    So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
    Any help or advice on this please !!

    The program is not meeting the expectations
    and the problem is due to reflection.Do we know this for certain?
    ... my application gets the class name, field name
    etc. from an XML file so i don't know their method names
    beforehand .
    Now since every class instance corresponds to a row
    in the database and i have to call get and set
    methods of each class instance so the performance
    keeps on degrading as the number of columns and rows increase .
    Can somebody suggest some improvement regarding this
    and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
    Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
    Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
    You can test this easy enough.
    If you comment out the reflective method invocations and leave the rest of your code untouched,
    does your application processing speed up significantly?

  • Query help needed for querybuilder to use with lcm cli

    Hi,
    I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups.  I have seen a few posts that are similar, but I have a specific question/concern.
    I just recently had to reference one of these back ups only to find it was incomplete.  Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
    Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis.  This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users.  I am not quite sure how to accomplish this...
    Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content.  Then I call the lcm_cli using the proper command.  The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
    To do what I want to do...
    1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
    2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether):  SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
    In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
    I just think chunking something like this is more effective and BO has no built in back up capability that already does this.  We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
    Any thoughts on this would be much appreciated.
    thanks,
    Missy

    Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design).  I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
    SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
    This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
    So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
    Hopefully this can help someone else too!
    Thanks,
    missy

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • Schedule a daily job using JOB_CLOSE

    Hello,
    I want to schedule a daily job using job_open, job_submit & job_close.
    This job should run everyday at 22:00 hrs.
    What are the parameters I need to set for the FM JOB_CLOSE?
    Thanks,
    A Pothuneedi

    Look at this sample provided by SAP : <a href="http://help.sap.com/saphelp_sm32/helpdata/en/fa/096d8e543b11d1898e0000e8322d00/content.htm">Sample Program: Start-Time Window with JOB_CLOSE</a>
    Sample Program: Start-Time Window with JOB_CLOSE Locate the document in its SAP
    <b>Library structure</b>
    * Submit job: start-time window defined, with periodic repeat and
    * with target system upon which the job is to run.
    * In this case, you must provide start date settings. You can
    * have the job started immediately with a JOB_CLOSE parameter,
    * set the start date yourself, or ask the user with
    * BP_START_DATE_EDITOR.
    * Example: Provide start-date specifications yourself.
    STARTDATE = '19970101'.
    STARTTIME = '160000'.
    LASTSTARTDATE = '19970101'.
    LASTSTARTTIME = '180000'.
    CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
    JOBCOUNT = JOBNUMBER " Job identification: number
    JOBNAME = JOBNAME " and name.
    SDLSTRTDT = STARTDATE " Start of start-time...
    SDLSTRTTM = STARTTIME " window
    LASTSTRTDT = LASTSTARTDATE " Optional: end of...
    LASTSTRTTM = LASTSTARTTIME " start-time window
    PRDMONTHS = '1' " Restart at intervals of
    PRDWEEKS = '1' " the sum of the PRD*
    PRDDAYS = '1' " parameters
    PRDHOURS = '1'
    PRDMINS = '1'
    STARTDATE_RESTRICTION = BTC_DONT_PROCESS_ON_HOLIDAY
    " Restrict job start to work
    " days; don't start job if
    " scheduled on holiday.
    " Other values:
    " BTC_PROCESS_BEFORE_HOLIDAY
    " BTC_PROCESS_AFTER_HOLIDAY
    CALENDAR_ID = '01' " ID of R/3 factory calendar
    " for determining workdays
    TARGETSYSTEM = 'hs0011' " Optional: name of the host
    " system on which the job is
    " to run. Set only if
    " absolutely required.
    " Example: A required tape
    " drive is accessible only
    " from a single host system.
    IMPORTING
    JOB_WAS_RELEASED = JOB_RELEASED " If user has authorization
    " to release jobs to run, job
    " is automatically released
    " when it is scheduled. This
    " field is set to 'x' if the
    " job has been released.
    " Otherwise, the job is sche-
    " duled but must be released
    " by an administrator before
    " it can be started.
    EXCEPTIONS
    INVALID_STARTDATE = 01
    JOBNAME_MISSING = 02
    JOB_CLOSE_FAILED = 03
    JOB_NOSTEPS = 04
    JOB_NOTEX = 05
    LOCK_FAILED = 06
    OTHERS = 99.
    IF SY-SUBRC > 0.
    <Error processing>
    ENDIF.
    Regards

  • Schedule Background job using transaction CATM

    Hi all,
    Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
    I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
    After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
    When I run the program in the background, it posts only for one purchase order.
    When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
    How to read the whole stack and post the whole stack of purchase orders? 
    Please help me out with this.
    Thanks
    Regards
    Srinivasan Desingh
    408 368 3837

    Hi,
    When I run the program in the background, it posts only for one purchase order.
    When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
    See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
    Regards
    Shishir

  • Schedule background job using system variant

    Dear gurus,
    We're planning to schedule background job using system variant, for example, current fiscal year and current posting period (transaction AFAB). Is it possible? So for example, for this month, "Posting Period" value will be 6, and then next month will be 7.
    Can you tell me how to do this, if I want to set up the schedule only once?
    Thanks for your help.
    Best Regards,

    done using abap

  • How to Schedule Job using Database Control for SQLPLUS script?

    Hi All,
    I am using Database version 10.2. I would like to schedule a SQLPLUS script job using Database control (Not using Grid Control!). The following is the script.
    ========================================================
    define OEM_FRIENDLY=1
    define OWB_BACKGROUND=0
    set serveroutput on
    set verify off
    whenever sqlerror exit failure;
    define REPOS_OWNER='&1.'
    define LOCATION_NAME='&2.'
    define TASK_TYPE='&3.'
    define TASK_NAME='&4.'
    define SYSTEM_PARAMS='&5.'
    define CUSTOM_PARAMS='&6.'
    alter session set current_schema = &REPOS_OWNER.;
    set role owb_d_&REPOS_OWNER., owb_o_&REPOS_OWNER.;
    variable exec_return_code number;
    begin
    -- Initialize Return Code
    :exec_return_code := wb_rt_api_exec.RESULT_FAILURE;
    -- Run Task
    :exec_return_code := wb_rt_api_exec.run_task('&LOCATION_NAME.',
    '&TASK_TYPE.',
    '&TASK_NAME.',
    '&CUSTOM_PARAMS.',
    '&SYSTEM_PARAMS.',
    &OEM_FRIENDLY.,
    &OWB_BACKGROUND.);
    end;
    exit :exec_return_code;
    ===========================================================
    Is it possible to schedule SQLPLUS script with 6 different parameters? If yes then how can I schedule for monday to friday or only for Saturday and sundays.
    Please provide brief steps.
    Thanks for your help in advance.
    - Mehul

    Let me explain to you about scheduler.
    You can schedule a pl/sql stored procedure TEST_S as follows...
    Begin
    dbms_scheduler.create_job(
    job_name=>'MY_JOB',
    Job_Type=>'STORED_PROCEDURE',
    job_action=>'TEST_S',
    start_date=>sysdate,
    repeat_interval=>'freq=monthly;BYDAY=MON,TUE,WED,THU,FRI',
    end_date=>null');
    END;
    You can also also execute o/s script like .bat or .sh. For this job type should be EXECUTABLE.
    Example of converting a .sql script in .bat script...
    insert.sql
    insert into dept values(50,'IT','LONDON');
    exit
    insert.bat
    sqlplus scott/tiger @insert.sql
    Executing now...
    C:\Documents and Settings>insert.bat
    C:\Documents and Settings>sqlplus scott/tiger @insert.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Mar 1 08:01:00 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    1 row created.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - P
    oduction
    With the Partitioning, OLAP and Data Mining options
    C:\Documents and Settings>
    So first read about DBMS_SCHEDULER and do the work in prompt. Then you can go and schedule it even by database control.
    Scheduling by database control...
    http://www.oracle.com/technology/oramag/oracle/04-jul/o44tech_dba.html
    Scheduler
    http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm#CIHEHDHA
    PS: By default each job you created is disable state. Please enable it by enable procedure of DBMS_SCHEDULER package.

  • Getting error while trying to execute a external job using dbms_scheduler

    Hello,
    I create a job using alpha account.
    begin
    dbms_scheduler.create_job(
    job_name => 'jps_test_executable',
    job_type => 'EXECUTABLE',
    job_action => '/usr/bin/ksh',
    number_of_arguments => 2
    dbms_scheduler.set_job_argument_value (
    job_name => 'jps_test_executable',
    argument_position => 1,
    argument_value => '/tmp/abc.sh'
    and when I execute the job in the schema using alpha account it works fine.
    BEGIN
    DBMS_SCHEDULER.run_job (job_name => 'jps_test_executable',
    use_current_session => FALSE);
    END;
    Works fine.
    But if I try to execute the same job using some other account say beta in the same schema , I am getting error
    ORA-27476 :”SMS.RUN_SMS_JOBS Does not exist ORA-06512 at “SYS.DBMS_ISCHED” line 2793 ORA-06512 :at “SYS.DBMS_SCHEDULER”,line 1794
    even I give the fill qualifier, still I am getting the error.
    BEGIN
    DBMS_SCHEDULER.run_job (job_name => 'alpha.jps_test_executable',
    use_current_session => FALSE);
    END;
    Any help will be appreciated.
    Thank you,
    Raj

    It's the expected behavior:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm#CIHHBGGI
    RUN_JOB requires that you be the owner of the job or have ALTER privileges on that job. You can also run a job if you have the CREATE ANY JOB privilege.So, you need to grant the required privilege:
    aplha@orcl> grant alter on alpha.jps_test_executable to beta;HTH
    Enrique
    PS If your problem was solved consider marking the question as answered.

  • In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

    In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

    Have you turned the iPad off then back on? That often helps with problems.

  • Help tracking the condition of a form

    Hi All
    Thank you for viewing my post.
    I am a relavtive beginner with Livecycle but have got a reasonable grasp on scripting with javascript etc.
    Here's my problem.
    I have created an internal order acknowledgement form.
    This form is filled in by our internal sales dept, and in the form they indicate the reviews required to process the order e.g. engineering review, operations review, sales review or a combination of them.
    They do this via checkboes.
    Currently when they submit the form, I have background script that saves the form based on specific information in the form i.e. order number + initals of user + customer name + todays date.pdf on our server (using the trusted application method). After this operation a Mailto command is specified to mail the form to the departments that are ticked.
    Each department that is selected for review then has its own comments area and submit button on the form. Once the department has reviewed the order and done whatever work is required for it they simply submit the form which in turn gets saved as order number + initals of user + customer name + todays date + departmentname review completed.pdf, and emails the form back to the order processor.
    OK this all works great!!
    But it now means I have up to 4 forms being saved for each order, which is OK but now I have been asked to make it more tracable for metrics.
    i.e. if a department looks at the folder where the forms are stored can they view quickly the forms requiring their attention.
    So I have a few options but not sure how to achieve any of them.
    1. - When each file is saved it then deletes the last? - risky because if it is open at hte time on anybodys computer this process wont happen, and I am not sure if it is possible to delete files with javascript through adobe reader?
    2. - export certain fields on each submit  (just the order number, customer name and current status of submit buttons) to a single external file which I can then interrogate with excel or something similar). This sounds good but I have no idea how.
    3. use a mysql database to collect the data from these fields but again not sure what is involved with this / or if its possible.
    ANY HELP IS MUCH APPRECIATED.
    THANK YOU IN ADVANCE.

    Hi Paul
    Thankyou for your response.
    Is it possible to move a file from one directory to another using
    JavaScript under adobe control?
    Thankyou for the invite to your seminar I will attend.
    Thanks
    Graham
    pguerett <[email protected]>
    19/03/2010 15:44
    Please respond to
    [email protected]
    To
    Graham Spaull <[email protected]>
    cc
    Subject
    Help tracking the condition of a form
    Understand your issue and typically this is handled by a Process
    Management or workflow product. LiveCycle has an option for this but it
    might be overkill for what you are trying to do. Anyways regarding your
    points:
    1. You cannot delete anything from th efile system form inside of Acrobat
    (because of security)
    2. You cannot export specific fields, you can export all of the data then
    manipulate it using some 3rd party program. Think in terms of submitting
    it to a srver then having a server program extract the bits you needd and
    do the update.
    3. You can have the forms communicate with a DB but that requires the need
    for another LiveCycle module called Reader Extensions to allow Reader
    users to access the DB, If you are using Acrobat then that is not a
    requirement. I am giving a presentation on this topic next Tues (23rd of
    Mar) at 12 EST. If you are interested you can register here:
    http://acrobatusers.com/events/2220/tech-talk-database-connected-forms
    Paul

  • Condition types used in cin

    i have some confusion on cin
    what are condition types used in cin with details
    and where will assign  TAXINJ and TAX INN  please give me full details with example if any documents available please send to [email protected]
    advanced thanks

    <b>TAXINN:</b>
    JEXP IN: A/R BED %
    JEXQ IN A/R BED
    JEAP IN A/R AED %
    JEAQ IN A/R AED Qty
    JESP IN A/R SED %
    JESQ IN A/R SED Qty
    JASS IN A/R Assessable Va
    JIN1 IN A/R CST
    JIN2 IN A/R LST
    JLST IN A/R LST
    JMAN IN Manual excise
    JMOD IN A/R BED ..............................
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • To change vendor no for condition types using BAPI_PO_CHANGE

    Hii,
    how to change vendor no for certain condition types using BAPI_PO_CHANGE.
    Is it possible .
    Any parameter is there.
    Plz help urgent
    Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 5:23 PM

    Hi,
       It is possible.
    wa_pocond-vendor_no = wa_konv-lifnr.
    wa_pocondx-vendor_no = 'X'.
       wa_pocond-condition_no = wa_konv-knumv.
        wa_pocond-itm_number = wa_konv-kposn.
        wa_pocond-cond_type = wa_konv-kschl.
        wa_pocondx-condition_no = wa_konv-knumv.
        wa_pocondx-itm_number = wa_konv-kposn.
        wa_pocondx-cond_type = 'X'.
        wa_pocondx-change_id = 'U'.
        APPEND wa_pocondx TO it_pocondx.
        CALL FUNCTION 'BAPI_PO_CHANGE'
          EXPORTING
            purchaseorder                = wa_konv-ebeln
          POHEADER                     =
          POHEADERX                    =
          POADDRVENDOR                 =
          TESTRUN                      =
          MEMORY_UNCOMPLETE            =
          MEMORY_COMPLETE              =
          POEXPIMPHEADER               =
          POEXPIMPHEADERX              =
          VERSIONS                     =
          NO_MESSAGING                 =
          NO_MESSAGE_REQ               =
          NO_AUTHORITY                 =
          NO_PRICE_FROM_PO             =
        IMPORTING
          EXPHEADER                    =
          EXPPOEXPIMPHEADER            =
         TABLES
           return                       = it_return
           poitem                       = it_poitem
           poitemx                      = it_poitemx
          POADDRDELIVERY               =
          POSCHEDULE                   =
          POSCHEDULEX                  =
          POACCOUNT                    =
          POACCOUNTPROFITSEGMENT       =
          POACCOUNTX                   =
          POCONDHEADER                 =
          POCONDHEADERX                =
           pocond                       = it_pocond
           pocondx                      = it_pocondx
          POLIMITS                     =
          POCONTRACTLIMITS             =
          POSERVICES                   =
          POSRVACCESSVALUES            =
          POSERVICESTEXT               =
          EXTENSIONIN                  =
          EXTENSIONOUT                 =
          POEXPIMPITEM                 =
          POEXPIMPITEMX                =
          POTEXTHEADER                 =
          POTEXTITEM                   =
          ALLVERSIONS                  =
          POPARTNER                    =
          POCOMPONENTS                 =
          POCOMPONENTSX                =
          POSHIPPING                   =
          POSHIPPINGX                  =
          POSHIPPINGEXP                =
          POHISTORY                    =
          POHISTORY_TOTALS             =
          POCONFIRMATION               =
        COMMIT WORK AND WAIT.

  • Monthly purchase value,depending on condition type used.

    Can we search for PO,depending on condition type used in the PO.eg. we are using a condition ZENT for entry tax and
    the requirement is to search the po containing that ZENT condition.In dynamic selection mode there is condition group in
    purchase order detail,but it is not selecting the required PO.please guide.

    Hi,
    This requirement is not possible in std SAP Report.
    You need to develop a Z report with the help of ABAPers.
    Give proper logic for them for creating this req.
    Regards,
    Rahul

  • Trigger a job using an event through a process chain

    Hi,
    After the success of 5metachain, I am using AND condition
    My requirement is as follows, it should trigger a job which needs to be after AND condition,
    I have created an event using sm64. Basically the client wants to trigger the job using the event through the process chain. I have tried test scenariou2019s using ABAP program (Process type) in the process chain but it is failing. Is there any other way to trigger a job using an event through a process chain? If ABAP program is the only option, can you please specify what all needs to be filled in the variant?
    Regards.
    Jerry

    Hi,
    Create a program like below,
    CALL FUNCTION 'BP_EVENT_RAISE'
      EXPORTING
        EVENTID = 'EVENT WHICH YOU HAVE CREATED'
    EXCEPTIONS
       BAD_EVENTID                  = 1
       EVENTID_DOES_NOT_EXIST       = 2
       EVENTID_MISSING              = 3
       RAISE_FAILED                 = 4
       OTHERS                       = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    search and include the program name which you have created above in the "ABAP program" process type which you are going to include in the process chain.
    Include the event which you have created in the start condition of the job.
    Note: No need of give any variant, because here we are calling only one function in this program.
    Regards,
    Sridevi.

Maybe you are looking for