Help on software and Hardware

Hi All
I think i am posting this question in the right place, could someone give me a couple of pointers on what i need to set up a home recording studio please,i am a musician who normaly uses a recording studio and engineer for what i need, so i decided to have a bash at it myself, i have a Intel G5-2ghz intel core duo- 1GB DDR2 SDRAM.
Whatdo i need in terms of interfaces,leads,external hard drives.....
Any Help?
I have about £700 to spend at the moment, but would like to hear about have some feedback on decent equipment needed.
Thank You All
Romany

The Focusrite Saffire is a great interface. You'll have good quality but it's still affordable. If you don't have the cash for Logic Pro, you can buy Logic Express and upgrade later. You don't tell us what you want to record but you'll probably need a mic. Check out Rode products. The NT-1A and NT-2A are incredible bang for the buck.

Similar Messages

My iPhone 5c is not recognized by my MacBook Pro or iTunes even though my software and hardware is up to date?

Even though my software and hardware is up to date my new iPhone 5c is not recognized by my computer or itunes, it does not even load or show up on my desktop. Is anyone else having this problem?
I'm afraid it may be related to activating the phone in the store earlier today and not having my computer on hand?

Hi, akp2585.
If your Mac is running OS X v10.6.8 or later and iTunes version 11.1 or later, here is a troubleshooting article that you may find helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Cheers,
Jason H.

When is the new macbook air coming..?? and what are the probable updates, both software and hardware..??

When is the new macbook air coming..??
and what are the probable updates in both softwares and hardware..??

SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
You'll want to ask this question elsewhere. "Management" on these boards don't want these topics.

I am looking to implement a POS system using my iPad, What is the best software and hardware for POS?

One of my clients wants to transition to an iPad POS system and I want to know what are the best software and hardware options?
I am going to completely upgrade the hardware so I'll need solutions for card readers, printers, cash drawers and iPad enclosures that are compatible with an iPad POS system.
Any help would be appreciated!

We're a small business and we decided to go on iPad POS deployment and started researching. We chose Maclocks iPad POS stand since it is the most secured way to use your iPad as a POS plus its design is awesome and takes 2 minutes to set it up! They have it for iPad mini too.
You can also see Maclocks iPad POS stand in action right here: http://youtu.be/0GaFCt-JDyg
Check it out:

Software and hardware requirement of Discover 4i?

What is the software and hardware requirement of Discoverer 4i?
What is the requirement also for application-mode? I mean the application side.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

Software and Hardware Requirement for Management Agent

Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

TThere are now two keyboard layouts" software and hardware" keyboard layout. Why does hardware one a

Under Settings'/general/keyboards, There are now two keyboard layouts" software and hardware" keyboard layout. I can easily just pic US in the software one, but the hardware one has three style choices of only arabic keyboards and it requires me to pick one. So I still get arabic when I hit the globe. If anyone knows how to solve this one (get rid of it!) i will respect u forever.
On this discussion board i always hear, go to settings keyboard and change to US. As explained above, that does not solve the problem, nor many other users I read on here have the same issue as I do. VERY ANNOYING.

You are might knight in shining armor. If u road on,a white steed with a glass of grand marnier I'd marry u! Lol. Oh yea. Im already married to one. Seriously thanks dude, u have no idea how much this has driven me nuts that i couldn't even see an edit button? Thanxs again!
Lisa

How do i make a full diagnostic for software and hardware both?

Hi everyone,
because of my macbook pro(this is my first mac and only one i have) have been change logic board for three time, but i always use it nicely but still like this(maybe I overprotect it?), recently i heard "pop" sound out from the air vent, i not sure what happen or maybe it just some random sound from surrounding, i just not sure because it happen not every noticeable, so i decide to do a full scan diagnostic on hardware and software, I have months not using my mac, do i have to do a clean install, to make sure everything working, I actually having some problem in the last time i use my mac, the problem is as below:
1) the ooo sound problem as i mentioned earlier
2) iwork not update properly
3)apple hardware test not show up when press D instead internet recovery show up(only recently, before this everything fine)
4)maverick a little unstable like mountain lion
So how do i do full diagnostic an should i make a clean install instead?
Thanks for helping!!!!

How do I add a Acrobat button to my inDesign button? I created a button in inDesign with a rollover feature and I want to preserve this feature in Acrobat. Can I apply some type of "invisble" button in Acrobat with a Acrobat JavaScript action?
Thank you!
John

Live Green Screen Broadcast and Record - Which Software and hardware? DESPERATE

I want to setup a stand (for example in a shopping centre) where I can give the opportunity for people to star in their own movie and they will get a DVD straight after them being filmed.
Below is an example of what I mean:
There is a green screen with a toy car, big enough for a child to sit infront of the screen. A parent pays me for their child to star in their own movie. The child sits in the car for 3 minutes playing with the steering wheel and pretending to be in a race. This 3 minutes is recorded on a video camera, as well as the green screen being chromakeyed out showing the child in a race on a big TV that draws the crowds. Straight afterwards the customer is given a DVD of their movie.
further spec needed:
I want high definition footage for the Movie on DVD
I want to be able to record this footage as it is being shot - 4-5minutes from when the child sits in the car to getting the DVD as to maximise income/hour.
I am wanting to know which software of the Production Premium CS 5.5 software will stream it live to the TV and record it on the DVD on the computer - I know that I can stream it to the TV and use a DVD Recorder to tape whats on the TV, but apparently that is unreliable.

Thanks for the reply Mylenium.
None, plain and simple. You are looking completely in the wrong place. And it's not even a mere software problem. As a minor, you would still need a capture card to stream the camera via HDMI or professional video signals (HD SDI, YCbCr Component etc.) to your computer. It's nothing you can do with any standard graphics card. Depending on what else you require, you would probably need more specific hardware like a NewTek Tricaster or whatever...
Ok. I then will break it up. Is there any Prod Prem cs5.5 software that will live stream the chromakey footage to the TV? Surely there is a way to have a live feed from the camera to the computer without the need for hardware and then software that will stream it out to the TV - Apparently Wirecast can do this - does Adobe not have something similar ? I am going to be building a Computer around the above intended use, so a P2 Card Reader was suggested. The budget is R8000, or $800 for the exerything except the monitor.
That's impossible. Per spec, DVD can only record SD PAL/ NTSC. For HD, you would need a BluRay recorder and that's gonna cost you, especially since for what you have in mind only the more expensive BD-RE will do what you want and due to the strict licensing rules, BD recorders are far and few inbetween and thus expensive...
Mylenium
Thanks Mylenium for the clear reasons for this, I need a quality that is not pixelated to be displayed on a TV at home when the people take their DVD home to view. Suggestions on resolution?
HAs anyone else got any low budget solutions?
Some Context: I am teaching myself everything in order to do this - unemployed and know i can make this work though. I have never been involved in the field before I got this idea so I have great gaps of knowledge here.

Xperia Z2 Tablet software and hardware (?) problems

I've purchased Xperia Z2 Tablet (SGP512, 32GB/WiFi) about a month ago and have experienced some problems till now:
touchscreen won't respond very often both on lock- and homescreen as well as in apps; it seems a lot of other people have these problems, too, but I wanted to mention it again
also UI is laggy sometimes when navigating on homescreens or the app drawer
when navigating in apps the device sometimes makes weird noises (especially when scrolling down in Google Play Store), it's kind of a crackling sound, not very loud but annoying and I'd rather have it disappear
microphone quality seems to be bad, I've been told that there'd be quite a loud and annoying static when chatting over VoIP (Skype)
I'd be really happy, if there was a solution for the problems above.

Occurs with my z2 tablet also (the touchscreen problem), gets extremely fustrating at times.
Hopefully it's a software issue, not a hardware issue.

Best back up software and hardware requirement for the same

Good morning to all,
I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec
We plan to upgrade our servers , and moving to VMs and plan to implement network storage.
So we want a back up solution which could back up VMs ,Shared folder and other required data.
What are the best practice and solutions for backups.

Nopes :)
It depends on you. I've been using Symantec from many years now ;)
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

I installed the NI-6601 Timer/Counter software and hardware.

I run couple examples written in Visual Basic provided with NI-DAQ..
I got the same error message:
"CWCounter.Configure"
Does anyone know why and how to get the problem resolved?
Thank you for help.

Diepni:
What version of ComponentWorks do you have? Since the NI-6601 board came out after ComponentWorks 2.X, that version of ComponentWorks does not support the NI-6601. Support was added for this board in ComponentWorks 3.0.
If you would prefer, you could instead program your 6601 directly with NI-DAQ from Microsoft Visual Basic. NI-DAQ ships with some Microsoft Visual Basic examples you may be interested in. A number of these examples are written specifically for the TIO ASIC on your 6601 board and can be found under NI-DAQ\Examples\VBasic\Ctr.
There has been a number of enhancements added to version 3.0 of ComponentWorks. You can read more about these differences at the following URL.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/96cc25af
a611fc8f8625689e007f1e21?OpenDocument
If you are interested in upgrading, please go to our Upgrade Advisor (http://www.ni.com/advisor), or contact your National Instruments Sales Representative.
I hope this helps,
Chris Wood
Applications Engineer
National Instruments

Certified Associate Developer with over 30 years software and hardware experience posting resume.

I am currently looking for a position that involves Labview project development in the Milwaukee or Chicago area. Attached is my resume.
Thank you.
Attachments:
EdwardRMonetalabviewresume.doc ‏37 KB

Hi,
We have an immediate need for a LabVIEW programmer for our client in Cleveland, OH.
Certified candidates are preferred but otherwise will be considered as well.
Please send me your resume if you are interested and indicate a good time to reach you and I will call you to discuss further.
Sree Chitra
Technical Recruiter
Volt Technical Resources
23240 Chagrin Boulevard, Suite 135 | Cleveland, OH 44122
t: 216.464.4400 | f: 216.464.8461
[email protected] | www.volt.com

I have purchased Iphn 4s recently and since then i m facing issues around Battery back up, Software and even issue around hard drive. I have visited I store where they formatted my phone but nothing positive has happened. How do i escalate?

I have purchased I phone 4S on April 30th 2014. Since I bought this phone, I have been facing issues such as Battery Back up, Software and Hardware issue and hang issue. I had visited I store last month where they just formatted my phone. The issues were not taken care completely, even till now the issues are on. I would appreciate if you could help me with the right escalation desk for raising my voice to Apple team.
I have been using apple product since long now and never face such dissatisfaction in past
Regards,
GB

Hello, when you are having an error on your iPhone and going to the Apple store to get it taken care of, make sure you speak up and provide as much detail as you can. The first iPad Mini I had bought had errors on it, and I didn't speak up and provide further details on my issue.
Hope your issue gets resolved soon!
-RazorOrange

Is there any site about Apple`s softwares and interface projects?

I `d like to know if anyone as links to any site about Apple projects, research etc. For the next development of applications, OSX, etc?
Something like Mozilla labs that shows projects and ideas..
Many thanks.

Mozilla is open source and transparent. Apple is closed source and proprietary. However, you can gather a lot of information by joining Apple Developers Connection (http://developer.apple.com/). Some levels will provide access to pre-release software and hardware. Fees do apply.
There are some other options however. Safari is based on WebKit and you can follow that project here (http://webkit.org/). In addition, Apple has opened up a lot of projects that can be traced here (http://developer.apple.com/opensource/index.html), and finally there is also MAc OS Forge which contains some additional projects (http://www.macosforge.org/). Also, many of Apple's technologies are integrated from Open Source projects (LDAP, Kerberos, Bind, etc). Following development from the project providers also gives good insight into the direction that Apple is going
Hope this helps.
Message was edited by: Strontium90

Help on software and Hardware

Similar Messages

Maybe you are looking for