Help please LCD scrolling screen code

Hi im triyng to do a jukebox but im stuck is there any 1 that has a code for a scrolling LCD screen that shows the tune that is now playing?
Many thanks.

I posted an example in this thread:
http://forum.java.sun.com/thread.jspa?threadID=5160112
Kaj

Similar Messages

Help please no sound ,error code

[size="3" face="comic sans ms,sans-serif">Help please am having trouble with my X-FI card...
[size="3" face="Comic Sans MS">?
Sound Devices
??? Description: SB X-Fi Audio [7C00]
?Default Sound Playback: Yes
?Default Voice Playback: No
??? Hardware ID: PCI\VEN_02&DEV_0005&SUBSYS_002902&REV_00
?? Manufacturer ID:
?? Product ID: 00
??? Type: WDM
??? Driver Name: ctaud2k.sys
?? Driver Version: 6.00.000.368 (English)
?? Driver Attributes: Final Retail
??? WHQL Logo'd: n/a
?? Date and Size: 0/8/2008 0:2:50, 526232 bytes
??? Other Files:
?? Driver Provider: Creative
?? HW Accel Level: Full
??? Cap Flags: 0x0
? Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
?Static/Strm HW 3D Bufs: 0, 0
??? HW Memory: 0
? Voice Management: Yes
?EAX(tm) 2.0 Listen/Src: Yes, Yes
? I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
??? Registry: OK
?? Sound Test Result: Failure at step 9 (User verification of software): HRESULT = 0x00000000 (error code)
[size="3" face="comic sans ms,sans-serif">Can anyone help me with this problem?.. Thank you..

$Hi Clayp,
You will have a higher chance of getting a
reply if you could describe when did this error code appear and what
were you doing when this happened. If you need help from Customer
Support, you can contact them using the email form here.

Help please with dull screen after waterlogging"

My 8520 went in the hand wash and had good soak! Took out battery, dried all in airing cupboard with rice. First of all on reboot scrool wouldnt work after 3 weeks it is alive again but screen so dim I cannot see..also water marks inside screen
Any advice to bring back brightness please? can live with water marks!
Love my Blackberry xx
Solved!
Go to Solution.

Other than replacing the screen... there's not a lot to be done.
Great that you were able to save your 8520 from the water... !
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help please! I need code for a button to stop a movieclip, when both are in a nested animation.

I'm working on a project that has a button and a movieclip, which we want the button to stop, both nested in a movieclip on the main timeline.
The button instance = muteBtn
The clip to stop instance = backmusic
The movieclip they are nested in = ecard
There's also a preloader that works just fine on the main timeline.
I've seen a wide variety of ways to stop a streaming MP3 and they all look way too complicated for my current Flash knowledge level. As far as I know, if the MP3 is in a movieclip, stopping that clip will also stop the MP3. If that's just dead wrong and what I'm trying to do will never work, please just let me know so I can struggle in another direction.
What I'd prefer though would be the coding to make this button work. I've tried a wide variety of ways to code something that seems like it should be so simple, and keep getting the error "Access of undefined property muteBtn". I'm assuming this means it can't find the muteBtn in the nested layer. How do I better define the muteBtn? Do I then need to add something else that more clearly defines where the clip I want it to stop is since it is nested too? PLEASE HELP ME!! Thank you in advance!
Some of what I've tried:
function endMusic(e:Event):void {
    ecard.backmusic.stop();
or
function endMusic(e:Event):void {
    backmusic.stop();
with...
muteBtn.addEventListener(MouseEvent.CLICK, endMusic);

When you target objects, you need to consider the path to the object based on where you are trying to target from. So if your code is in the main timeline and your button is inside a movieclip, then you need to target the button via the movieclip...
   movieclipName.muteBtn.addEventListener(MouseEvent.CLICK, endMusic);
As far as stopping a moiveclip resulting in stopping a sound from playing, it is not likely to work. To stop a sound you need to target the sound to stop it.

Help please. my iphone screen is magnified

hi, for some reason my iphone 4 screen is magnified. if anyone know how to fix this please help >.< thank you

If you have trouble turning Zoom off from your phone, connect the phone to iTunes, click the Summary tab, and click the "Configure Universal Access..." button. Select neither under the "Seeing" section and click "OK".

Help please .. Automatic code analysis tool

Hi,
I have written some action script for my project and i am
required to do a static code analysis on it.
I do not know any source code analyzers that support
actionscript particularly like fortify and ounce labs which
support Java script but not action script.Please suggest me
an tool that can do analysis for me.
Regards
Mallik.

Hi Ross,
Thank you very much for your reply, i think i should rephrase
my question to make it even clear.
I am looking for a tool to detect Buffer overflows, memory
leaks, security vulnerabilities, string vulnerabilities, Race
conditions. I am sorry i think by mentioning security i gave the
impression of protection my application from external intrusion.
But this is what i meant. For example, My project also includes C#
usage and i have options like fortifysoftware, ouncelabs
,parasoft's .TEST, FxCop (microsoft) to help me do static analysis
on my C# code. I need some tool like these for action
scripts.Please let me know if you need more explanation.
Regards
Mallik

Help Please! iMac screen colours have gone crazy

Can someone please please help me to solve this problem? I was playing around with my new iMac screen settings. I made changes to the calibration colour settings. Now I notice that the colour has all gone to alpha, gamma range and is looking horrible. Can someone please help me to restore the factory settings for the display? Or suggest ways in which I can fix it please? That would be greatly appreciated. Thanks in advance

Open System Preferences->Displays->Color and select "iMac". That should be the factory default settings, as when you run the calibrator the last thing it asks you is what you want to call your calibrated profile. The default name is "iMac Calibrated" which should be in that list too. If its not there and you overwrote the original, click the "Calibrate" button again and just click through it using the default choices it gives you. This will return the display to its default look.
HTH.

Help please! blue screen spinning wheel

Hi,
I am clueless when it comes to things like this I'm afraid so any help would be gratefully received!! This is the first time this has happened to my macbook so in a bit of a panic! Basically was trying to install a new scanner and when trying to download driver from epson site it said to install all updates which I did. Then realised it was taking forever so shut the laptop down at power button as there was no other option of stopping it. Anyway on start-up its just the blue screen with logo and spinning wheel and has been like this for 2 hrs ish despite turning on and off several times. Read through discussion topics and followed instructions for safe boot and resetting pram but no luck just retruns to spinning wheel etc Any help/advice would be great, thank you!!

That will be just fine, the other method would have repaired the HD if there were issues with it from corrupted download. But you should be good to go after it finishes, your data should still be there, but make sure to run software up date...that could take a while.
I'm sorry I didn't read your post carefully, it will install the version of OS on the disk, hence my recommendatio to run software up date.

How to get updated data automatically on flex scroll screen

i am showing invoices and corresponding articles in the invoice on flex scrolling screen.details of invoices i am storing in a xml object through java class. i want that whenever i create a invoice it should automatically appear on screen.what method i should implement to get new created invoices on scrolling screen.
code for strucrute
private function converToCollection( inData:XML ):ArrayCollection
var tempArrCollection:ArrayCollection = new ArrayCollection([]);
for(var i=0; i<inData.INVOICE.length(); i++)
var objToAdd:Object = new Object();
objToAdd.ID = inData.INVOICE[i].ID;
objToAdd.NAME = inData.INVOICE[i].NAME;
//added by Mitesh on 12-11
objToAdd.DATE = inData.INVOICE[i].DATE;
objToAdd.STATUS = inData.INVOICE[i].STATUS;
objToAdd.LOCK = inData.INVOICE[i].LOCKED;
objToAdd.LOCK_COLOR = inData.INVOICE[i].LOCKCOLOR;
objToAdd.EXISTANCE = inData.INVOICE[i].EXISTANCE ;
objToAdd.ARTICLES = null;
if( inData.INVOICE[i].ARTICLE.length() )
var articleArrColl:ArrayCollection = new ArrayCollection([]);
var articleLen:uint = inData.INVOICE[i].ARTICLE.length();
for( var k = 0; k<articleLen;k++)
articleArrColl.addItem({DESC:inData.INVOICE[i].ARTICLE[k].DESC,CODE:inData.INVOICE[i].ARTI CLE[k].CODE, QUANTITY:inData.INVOICE[i].ARTICLE[k].QTY});
objToAdd.ARTICLES = articleArrColl;
tempArrCollection.addItem( objToAdd );
return tempArrCollection;
display part of invoices
</mx:Script>
<mx:Canvas id="articlesContainer" x="15" y="38" width="90%" />
<mx:HBox horizontalScrollPolicy="off" verticalScrollPolicy="off">
<mx:Button id="closeBtn" styleName="closeButtonStyle" x="15" />
<mx:Label text="{xmlObj.ID}" id="invoiceId" width="120" fontSize="15" color="#373EA1" fontWeight="bold" textAlign="right" fontFamily="ArialEmbedded"/>
<mx:Label text="{xmlObj.NAME+'(total articles - '+ArrayCollection(xmlObj.ARTICLES).length+' )'}" width="350" color="#1B1D6D" fontWeight="bold" fontSize="15" textAlign="left" fontFamily="ArialEmbedded"/>
<mx:Label text="{xmlObj.DATE}" id="invoiceDate" width="300" fontSize="15" color="#373EA1" fontWeight="bold" textAlign="left" fontFamily="ArialEmbedded"/>
<mx:Spacer width="100%" />
<mx:Button id="printBtn" styleName="printButtonStyle"/>
</mx:HBox>
<mx:VBox id="printInvoiceBlock" width="100%" backgroundColor="#FFFFFF" visible="false">
<mx:HBox horizontalScrollPolicy="off" verticalScrollPolicy="off" backgroundColor="#FFFFFF">
<mx:Label text="{xmlObj.ID}" id="printInvoiceId" fontSize="8" color="#000000" fontWeight="bold" textAlign="right" fontFamily="Arial"/>
<mx:Label text="{xmlObj.NAME+'( total articles - '+ArrayCollection(xmlObj.ARTICLES).length+' )' }" color="#000000" fontWeight="bold" fontSize="7" textAlign="left" fontFamily="Arial"/>
</mx:HBox>
<mx:VBox id="printArticlesContainer" width="100%" backgroundColor="#FFFFFF"/>
</mx:VBox>

</mx:Canvas>

When you create your scroller, give it an ID (if you create it in MXML). If you create the scroller in
AS, make sure that whatever MXLM component you want to add it to has an ID. And, I would also try to use Sparks containers whenever possible. In any event, after you have defined your Scroller, this will make it simple.
1. Create a DataGroup.
2. Set DataGroup.dataSource = An ArrayList that contains all your screens.
3. Set Scroller.viewPort = dataSource
4. Create a new method to add new invoices to the ArrayList that contains all your screens.
Below is truncated code from where I do this same thing... I create the scroller in AS and use it with MXML components.
    public class FeedConfigVideoScroller
         * This is our actual list data.
        private var vidRendList:ArrayList = new ArrayList();
        // a variable to tell us to update or not.
        private var selectionChanged:Boolean = false;
        // a variable to hold ids of videos we're keeping
        private var ids:ArrayList;
        // an array list of items to be removed from this list.
        //before the item is added to the map, its label will be updated
        //and check box deselected.
        private var deselectedList:ArrayList = new ArrayList();
        private var addedScreens:Boolean = false;
        private var d:DataGroup;
        private var scroller:Scroller;
        private var feedID:int;
        public function FeedConfigVideoScroller(){
            d = new DataGroup();
            d.dataProvider = vidRendList;
            var vert:VerticalLayout = new VerticalLayout();
            vert.horizontalAlign = "left";
            d.layout = vert;
            d.width = 340;
            d.height = 370;
            scroller = new Scroller();
            scroller.height = 370;
        public function getScroller():Scroller {
            scroller.viewport = d;
            return scroller;
        public function addFCVLayoutComp(vidLayout:FeedConfigVidLayout):void {
            vidRendList.addItem(vidLayout);
        public function setVidRendList(vidRendList:ArrayList):void {
            this.vidRendList = vidRendList;

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

HT1350 my kids entered the wrong unlock code on my ipod too many times and now the screen says ipod disabled connect to itunes. Well i try connecting to itunes and i cant because my ipod is locked! need help please!

my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HP Pavilion a6000 desktop with Vista black screen - need help please!

I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!

jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

I forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod

i forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod...

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
And also see How to Recover Forgotten iPhone, iPad Restrictions Passcode.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

Hi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support

When i turn on my macbook pro it goes to white screen with picture of folder with ? on it help please

can't log on to macbookpro goes to flashing file with ? in middle help please

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Help please LCD scrolling screen code

Similar Messages

Maybe you are looking for