Help regarding makefile problem

I have been working on resolving makefile problem and i have also got the .cc files. But when i tried to run make file then error appears. The error is as follows. Anybody could help me to fix this problem??
The error is as follows:
g++ -Wall -shared -fPIC -I/usr/java/include -I/usr/java/include/solaris -O3 -c -o dk_i1_sctp_SCTPSocket.o dk_i1_sctp_SCTPSocket.cc
dk_i1_sctp_SCTPSocket.cc: In function ‘jshort sinfo_flags_2_java(uint16_t)’:
dk_i1_sctp_SCTPSocket.cc:351: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_UNORDERED’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:353: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_ADDR_OVER’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:355: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_ABORT’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:357: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_EOF’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc: In function ‘uint16_t sinfo_flags_2_C(jshort)’:
dk_i1_sctp_SCTPSocket.cc:367: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_UNORDERED’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:369: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_ADDR_OVER’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:371: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_ABORT’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:373: error: ‘dk_i1_sctp_sctp_sndrcvinfo_SCTP_EOF’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc: In function ‘void Java_dk_i1_sctp_SCTPSocket_subscribeEvents(JNIEnv* , __jobject*, jboolean, jboolean, jboolean, jboolean, jboolean, jboolean, jboolean, jboolean)’:
dk_i1_sctp_SCTPSocket.cc:800: error: ‘struct sctp_event_subscribe’ has no member named ‘sctp_adaption_layer_event’
dk_i1_sctp_SCTPSocket.cc: In function ‘void Java_dk_i1_sctp_SCTPSocket_setPeerParameters_1nati ve(JNIEnv*, __jobject*, jlong, __jbyteArray*, jint, jint, jshort, jint, jint, jint, jint, jbyte)’:
dk_i1_sctp_SCTPSocket.cc:996: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_HB_ENABLE’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1005: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_HB_DISABLE’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1012: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_HB_DEMAND’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1020: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_HB_TIME_IS_ZERO’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1028: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_PMTUD_ENABLE’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1035: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_PMTUD_DISABLE’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1042: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_SACKDELAY_ENABLE’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1049: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_SACKDELAY_DISABLE ’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1056: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_IPV6_FLOWLABEL’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1064: error: ‘dk_i1_sctp_sctp_paddrparams_SPP_IPV4_TOS’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc: In function ‘__jobject* processSCTPNotification(JNIEnv*, msghdr&)’:
dk_i1_sctp_SCTPSocket.cc:1703: error: ‘SCTP_ADAPTION_INDICATION’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1704: error: ‘sctp_adaption_event’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1704: error: ‘sai’ was not declared in this scope
dk_i1_sctp_SCTPSocket.cc:1704: error: expected primary-expression before ‘)’ token
dk_i1_sctp_SCTPSocket.cc:1704: error: ‘union sctp_notification’ has no member named ‘sn_adaption_event’
make: *** [dk_i1_sctp_SCTPSocket.o] Error 1

Hi @Tajuddin_Hongal ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that while connected to AC power your performance is good, but once you disconnect and run on battery the performance drops.
You have updated the driver and checked the power plan.
Your system has switchable graphics.   HP 15-d103tx Product Specifications.  Your processor has an integrated Intel 4600 and you have NVIDIA GeForce 820M (2 GB DDR3 dedicated).
When you are connected to AC it uses the high end to deliver the best performance, when you switch to battery, to save power, it switches to the lower end.  You should be able to configure the graphics in the Catalyst Control Center  to change this behaviour.  Here is a link to assist you with that endeavor.
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having an issue, I suggest contacting HP support for further assistance.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Need help regarding graphics problem,!!​!

    Hi,
                    I’m a Customer of your prestigious Organization, recently I bought a HP Laptop MODEL-15 D-103TX , everything is fine with my Laptop and Feeling proud to use this HP product , But I’m facing strange problem that my Laptop Graphics are running smooth when I connect to my AC power Charger , but as soon as I Disconnect the Power Cord , I lose the Graphics performance as I was getting it when I was connected to Power, and it makes me feel Very annoyed  that HP product can give such a silly but headache problem,
                                    I had even downloaded the HP drivers from the Official HP Website and Installed them Correctly as per the STEPS given in your Website, and even tried by Configuring the POWER PLAN to MAXIMUM performance, and even Calibrated the Battery according to the HP SUPPORT ASSISTANCE and it shows that Battery status is OK, but too I’m facing the same problem,
                    I hope you respond to my mail ID as soon as possible, and help me to solve this problem and maintain the SERVICE STATUS and PRIDE of HEWLET-PACKARD, Please Don’t make me upset, and don’t make me to take any further sever Actions.
                                                      ​                                                  ​                                            Thank You

    Hi @Tajuddin_Hongal ,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that while connected to AC power your performance is good, but once you disconnect and run on battery the performance drops.
    You have updated the driver and checked the power plan.
    Your system has switchable graphics.   HP 15-d103tx Product Specifications.  Your processor has an integrated Intel 4600 and you have NVIDIA GeForce 820M (2 GB DDR3 dedicated).
    When you are connected to AC it uses the high end to deliver the best performance, when you switch to battery, to save power, it switches to the lower end.  You should be able to configure the graphics in the Catalyst Control Center  to change this behaviour.  Here is a link to assist you with that endeavor.
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    If you are still having an issue, I suggest contacting HP support for further assistance.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • HELP, GX660 LED Problem

    Help, i have problem regarding my gx660 led(right)
    wen i turn on my led, all led lights turn on but the left led light located at the side of screen doesnt work.
    does my warranty cover this problem?

    Have you tried to reinstall the LED-manager?
    http://eu.msi.com/product/nb/GX660.html#/?div=Utility&os=Win7%2032 (if you use W7 64bit change the OS selector on that page first)

  • Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

    Hi, can anyone help with the problem I am having with pro book 4440s?  I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause.   it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
    The error message goes on :
    File: \Boot\BCD
    Status: oxcoooooof
    info: An error occurred while attempting to read the boot configuration.
    the only two options on the screen are enter=continue and ECS=exit
    I just can't get pass this screen.
    Please help.
    Thanks

    Hi,
    If you don't already have one, use another PC to create a Windows 7 Rescue CD.  Download the relevant ISO from the links below.
    Windows 7 32bit
    Windows 7 64bit
    You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu.  Insert the Rescue CD.  Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter.  You may also get a prompt to 'Press any key to continue' - do this if asked.
    When loaded, select Repair Your Computer and choose the Command Prompt.  When this loads, enter the following commands and hit enter after each one - include spaces as shown.
    Bootrec.exe
    bcdedit /export C:\BCD_Backup
    c:
    cd boot
    attrib bcd -s -h -r
    ren c:\boot\bcd bcd.old
    bootrec /RebuildBcd
    bootrec /fixmbr
    bootrec /fixboot
    Remove the Rescue CD and try rebooting the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • Trying to create an account on eprintcenter but it gives me an error regarding server problem

    I am trying to create an account on eprintcenter since one month but it gives me an error regarding server problem
    "Lo lamentamos. ¡Se acaba de producir un problema en nuestro servidor! Hemos registrado el problema y lo corregiremos en cuanto sea posible. Disculpe la molestia."
    "Sorry. There is problem on our server. He have registered the problem and solve as soon as possible. Sorry for the inconvinience"
    How can I use eprint service without a user?

    What browser are you using to access the site? I would start by trying to access the site from another browser. If that is not an option, I would clear the viewing history, cookies and cache for that browser under the settings. Then I would reboot the computer too. I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Re: PLEASE HELP regarding CLASSPATH anyone?

    I am desperate to research on Lucene but i can't understand on how to create the class path in java classpath.
    Hence i really need help regarding this.
    THANKS!

    this is for your Tim
    http://www.darksleep.com/lucene/
    isha,
    whats your exact problem?
    are you using any libraries of lucene?
    if using how are you setting the classpath?

  • Good day everyone, just wanna ask for help regarding my iPad, this past few weeks I've noticed that while playing the videos that I made it doesn't have its audio, but when using my music and other stuffs it has audio.. same through when i use skype

    Hi everyone, I just wanna ask regarding my ipad, This past few weeks after I recorded a video, when I played it, it has no audio, while when I use My music it has audio and same through with other apps, and when I use my skype also I can't hear my voice on a test call, what's the best solution you could offer to me to help with my problem. Hoping for a positive response from the tech gurus here. thanks much -appleS

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Need help regarding Cisco 1841 Router

    hello everyone , i am need of help regarding configuring of   FE 0/1 port. our company have a cisco 1841 router. The serial 0/0/0 is connected with VSAT for internet. The FE 0/0 is connected to switch(LAN) through which net connectivity is provided to all users. Recently a new VSAT has been installed at our site,with different IP series. So every time we want to switch between the two net connectivity we need to change the entire IP configuration of all users, which in turn prohibits the users from accessing the printers,data servers etc which are been set to our existing IP series. So, my idea was to configure the FE 0/1, so that just by changing the DNS will help us providing internet along with all other devices without changing the entire IP series. The new VSAT modem has a lan cable which can be connected to FE 0/1. Can any one help out in solving the problem. Our existing IP series is 192.168.3.1..... and the new VSAT series is 10.205.74.1......

    Bao
    Do I understand correctly that you will have 20 remote users who will telnet to the 2511 and from the 2511 will use reverse telnet to access the console of router1, router2, router3, etc which have their console ports connected to async ports of the 2511? If that understanding is correct then the firewall only needs to open TCP port 23 for telnet. The other ports (2001, 2002, etc) are between the 2511 and router1, router2, etc and will not be seen by the firewall. If my understanding is not correct then please clarify.
    I do not believe that you will find an image for the 2500 that supports SSH.
    HTH
    Rick

  • Need Help Regarding  ibook

    em user of   iphone  3gs  os 6.1.6
    Yesterday  i restore ma  iphone
    after that  em  Unable  to   install    ibook in  ma iphone  its  say me that u  need  os 7 ...
    need help regarding this issue....   what i do  is there any alternative app  ...?

    Hey Seungly,
    I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
    That could very easily be the case, a bad Airport card. Look at this recent post:
    http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
    John diagnosed it from the panic log.
    Does yours say something similar?
    Richard

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Help with my problems

    Hai, everybody.
    I'm currently using xperia x10 mini. I have several problems.  I can't update my phone via network, wifi or pc companion.  when I download application from android market, it won't install in my phone and I can't save anything in my memory card. help. tq in advance.
    Solved!
    Go to Solution.

    lot of problems
    first repair your phones using this and then see if everything is solved or not
    SUS ( Sony Update Service)  ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
                      or
    http://www.sonymobile.com/global-en/tools/update-service/
    both the links are same
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

Maybe you are looking for