Help Requested:  Unix WebLogic 6.0 sp2 and PetStore Error

Hello,
I have tried several variations to cleanly run the WL6 sp2 Pet Store
application on a Solaris 8 box.
The server starts, but I am getting the following error:
<Sep 7, 2001 3:57:05 PM EDT> <Critical> <WebLogicServer> <Failed to
invoke start
up class "StartBrowser", java.lang.ClassNotFoundException:
com.bea.estore.startu
p.StartBrowser>
This error I get from a clean install. What could be wrong?
Also by which command should the petstore be started?
./startPetStore.sh
sh startPetStore.sh
. ./startPetStore.sh
I would greatly appreciate any timely insight.
Leslie

After executing sh startPetStore.sh, bring up a browser and enter the
following URL to read about and optionally invoke the Pet Store
application:
http://<target_host>:<target_port>/index.html
LAA at Work wrote:
Hello,
I have tried several variations to cleanly run the WL6 sp2 Pet Store
application on a Solaris 8 box.
The server starts, but I am getting the following error:
<Sep 7, 2001 3:57:05 PM EDT> <Critical> <WebLogicServer> <Failed to
invoke start
up class "StartBrowser", java.lang.ClassNotFoundException:
com.bea.estore.startu
p.StartBrowser>
This error I get from a clean install. What could be wrong?
Also by which command should the petstore be started?
./startPetStore.sh
sh startPetStore.sh
. ./startPetStore.sh
I would greatly appreciate any timely insight.
Leslie

Similar Messages

  • JSP compiler in Weblogic 7.1 SP2 and Weblogic 8.1

              I have a web application (JSp and Servlets are generated) that loads fine with
              Weblogic 8.1. However, I have problems with Weblogic 7.1 SP2. In trying to load
              some of the JSP pages, I get the follwing type of errors
              Parsing of JSP File '/consume_int.jsp' failed:
              /consume_int.jsp(17): bean type com.mypackage.ConTypes.ConTypesJspBean has no
              read method for property 'consume_int_Int_parameter1'
              probably occurred due to an error in /consume_int.jsp line 17:
              <H4>consume_int_Int_parameter1:</H4> <jsp:getProperty name="ConTypesJspBean" property="consume_int_Int_parameter1"/>
              Wed Jun 09 20:01:34 BST 2004
              Looking further, I found that for property x, there are methods getx() and not
              getX(). Can this cause the problem. It seems to be working for some of the getx()
              methods and not for other ones.
              Any help would be appreciated.
              Thanks,
              MIB
              

              It does NOT seem to work with methods getX and setX for property 'x' in Weblogic
              7.1 SP2. It works fine in Weblogic 8.1. Any ideas ?
              - MBI
              "MIB" <[email protected]> wrote:
              >
              >I have a web application (JSp and Servlets are generated) that loads
              >fine with
              >Weblogic 8.1. However, I have problems with Weblogic 7.1 SP2. In trying
              >to load
              >some of the JSP pages, I get the follwing type of errors
              >
              >Parsing of JSP File '/consume_int.jsp' failed:
              >--------------------------------------------------------------------------------
              > /consume_int.jsp(17): bean type com.mypackage.ConTypes.ConTypesJspBean
              >has no
              >read method for property 'consume_int_Int_parameter1'
              >probably occurred due to an error in /consume_int.jsp line 17:
              ><H4>consume_int_Int_parameter1:</H4> <jsp:getProperty name="ConTypesJspBean"
              >property="consume_int_Int_parameter1"/>
              >
              >--------------------------------------------------------------------------------
              >Wed Jun 09 20:01:34 BST 2004
              >
              >Looking further, I found that for property x, there are methods getx()
              >and not
              >getX(). Can this cause the problem. It seems to be working for some of
              >the getx()
              >methods and not for other ones.
              >
              >Any help would be appreciated.
              >
              >Thanks,
              >
              >MIB
              

  • Problem with Weblogic 8.1 Sp2 and Struts 1.1 + tiles

    I am using weblogic 8.1 sp2 with struts and tiles.
    I am getting the follwing error in my web pages, which is not consistent.
    The error stack trace is as below.
    [java] <Oct 6, 2005 12:23:53 PM GMT+05:30> <Error> <HTTP> <BEA-101309> <[ServletContext(id=3212
    195,name=awmweb,context-path=/awm)] could not deserialize the context attribute "org.apache.struts.
    iles.DEFINITIONS_FACTORY"
    [java] java.io.NotSerializableException: com.awm.awm.controllers.layout.BaseLayoutControll
    r
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
    [java] at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
    [java] at java.util.HashMap.writeObject(HashMap.java:978)
    [java] at sun.reflect.GeneratedMethodAccessor140.invoke(Unknown Source)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java
    25)
    [java] at java.lang.reflect.Method.invoke(Method.java:324)
    [java] at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
    [java] at java.util.HashMap.writeObject(HashMap.java:978)
    [java] at sun.reflect.GeneratedMethodAccessor140.invoke(Unknown Source)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java
    25)
    [java] at java.lang.reflect.Method.invoke(Method.java:324)
    [java] at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    [java] at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
    [java] at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    [java] at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    [java] at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
    [java] at weblogic.servlet.internal.AttributeWrapper.convertObjectToBytes(AttributeWrapper.
    ava:136)
    [java] at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:112)
    [java] at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:69)
    [java] at weblogic.servlet.internal.WebAppServletContext.getAttribute(WebAppServletContext.
    ava:619)
    [java] at org.apache.struts.tiles.TilesUtilStrutsModulesImpl.getDefinitionsFactory(TilesUti
    StrutsModulesImpl.java:145)
    [java] at org.apache.struts.tiles.TilesUtilStrutsModulesImpl.getDefinitionsFactory(TilesUti
    StrutsModulesImpl.java:133)
    [java] at org.apache.struts.tiles.TilesUtil.getDefinitionsFactory(TilesUtil.java:186)
    [java] at org.apache.struts.tiles.TilesUtil.getDefinition(TilesUtil.java:224)
    [java] at org.apache.struts.taglib.tiles.util.TagUtils.getComponentDefinition(TagUtils.java
    339)
    [java] at org.apache.struts.taglib.tiles.DefinitionTag.doStartTag(DefinitionTag.java:261)
    [java] at com.awm.awm.jsp._errors.__500_45_servererror._jspService(__500_45_servererro
    .java:208)
    [java] at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    [java] at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStub
    mpl.java:971)
    [java] at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    [java] at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    [java] at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.filters.AWMBaseFilter.doFilter(AWMBaseFilter.java:97)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.quote.QuoteUsageFilter.doFilter(QuoteUsageFilter.java:70)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.filters.AWMBaseFilter.doFilter(AWMBaseFilter.java:97)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.filters.FrontFilter.doFilter(FrontFilter.java:160)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.filters.JTidyFilter.doFilter(JTidyFilter.java:152)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at com.awm.awm.filters.PerfLogFilter.doFilter(PerfLogFilter.java:211)
    [java] at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    [java] at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.jav
    :305)
    [java] at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:
    23)
    [java] at weblogic.servlet.internal.WebAppServletContext.handleException(WebAppServletConte
    t.java:3908)
    [java] at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext
    java:3683)
    [java] at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585
    [java] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    [java] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    [java] >
    Can any one comment on why I am getting this error? Is it related to the hot deployment issue? Please comment.
    Thanks in advance,
    K

    Hi,
    Generally this type of exception raised by a class or the serialization runtime when a class may not be serialized.The argument should be the name of the class.
    You might be forgot to implement the serializable interface for the class in struts frame work.
    check it properly.
    Regards
    Anilkumar kari

  • Help request: Completed 720 x 480 project and encoded it and all the nice colors are now posterized.

    Through the entire project the reds are greens and the blues are grey.  Looks horrible as an AVI.  Ran it both in Windows Media and Quicktime and it looks equally distorted in both.   Looked fine when playing the Adobe Premiere original.  I haven't had this problem before with  Adobe Premiere CS4.  Any idea how to correct it without starting all over from the beginning?
    Thank You,
    John

    Greg,
    Not meaning to change the path of our e-discussions, any suggestions on who I can contact at Adobe on this?  I registered the product in March.  After spending close to 3-4 hours on phone support (getting disconnected at least four times over three days with Delhi), I received a notice today that my case #183641134 was closed because "CS 4 edition is no longer supported."
    With as much money as I've spent on various versions of Premiere in the past, I need to register a very major dissatisfaction to someone at Adobe with the power to rectify this.
    You've been great so please realize my extreme frustration is not with you.
    John Amodeo

  • Help understanding the nature of this 1006 and 1009 errors?

    Hi,
    I am working in Flash Professional CC, testing an old game with two levels and a win and lose screen. The game works until you get to the second level scene.  Once you're there, the 1006 output errors appear.
    TypeError: Error #1006: removeChild is not a function.
        at final_project_2_fla::golem_22/onHealth()[final_project_2_fla.golem_22::frame1:6]
    removeChild( ) is only used in the golem health function which it is referencing., so I know the problem's probably there. Thing is, I don't know why Flash is telling me I'm using removeChild as a function or why a sixth frame is being reference. Unless that's a code line references?
    Here's the code from the enemy I was talking about.
    var health:int=4;
    this.addEventListener(Event.ENTER_FRAME,onHealth);
    function onHealth(evt:Event):void{
        if(health==0){
            this.removeEventListener(Event.ENTER_FRAME,onHealth);
            Object(parent).removeChild(this);
    Also, when you beat the game you get this error
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at final_project_2_fla::MainTimeline/onLoop2()[final_project_2_fla.MainTimeline::frame4:27]
    I read up on the 1006 error because it's really common. I know the steps begin with tracing something, but I'm not sure what to begin tracing because it's referencing the function, but I think it's refencing the 27th line of a fourth frame? Which doesn't make sense because I don't have a fourth frame there.
    Here's the onLoop2 function, if it will help out
    function onLoop2(evt:Event):void {
        charMove();
        if(char.hitTestObject(bgr.page1)){
            bgr.page1.visible=false;
            uipage1.visible=true;
            removeListeners2();
            echannel=ff.play(0,1);
            gotoAndStop(1, "win");
        ///collision with golem 1
        if(char.hitTestObject(bgr.golem)){
            trace(attack);
            if(attack){
                bgr.golem.x+=50;
                bgr.golem.health--;
                attack=false;
            }else{
                if(bgr.golem.arms.currentFrameLabel=="idle"){
                    bgr.golem.arms.gotoAndPlay("attack");
                health-=5;
                bgr.x+=10;
            if(health<75){
                    hp4.visible=false;
                if(health<50){
                    hp3.visible=false;
                if(health<25){
                    hp2.visible=false;
                if(health<1){
                    hp1.visible=false;
                    removeListeners2();
                    gotoAndStop(1, "lose");
        Thank you for your time and effort.

    When you read errors, the references to find the code are frame:line as you thought it might be.  The 1006 error is occuring at frame 1 line 6.  The 1009 error is occuring at frame 4 line 27.
    For the 1006 error, what you could do is trace the the parent object to see what it is.  The problem might be as simple as you trying to cast it as an Object, when you might need to be casting it as a DisplayObjectContainer or some other type that has the removeChild function in its arsenal.
    The 1009 error indicates that one of the objects being targeted by your code is out of scope.  This could mean that the object....
    - is declared but not instantiated
    - doesn't have an instance name (or the instance name is mispelled)
    - does not exist in the frame where that code is trying to talk to it
    - is animated into place but is not assigned instance names in every keyframe for it
    - is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).

  • Help - updatd to 7.3 this morning and getting error

    i got the error that 'cannot run because it has detected a problem with your audio configuration' does anyone know what that means and how I fix. I can't get iTunes to open at all anymore.

    Alternately, the following troubleshooting document is also worth a try:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • TS1368 Help, unable to connect to iTunes Store and getting Error (-3212)

    fr

    Alternately, the following troubleshooting document is also worth a try:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • Double submission problem in J2EE application under Weblogic 8.1 SP2 server

    Hi,
    We are facing double submission problem in our J2EE application which is running under Weblogic 8.1 SP2 and for the same we already implemented or added the below preventive solutions.
    1. We disable the SUBMIT button once the user clicks it.
    2. We preventated pressing 'F5' button and clicking 'Refresh' button in the browser.
    3. Also we tried to prevent by declaring the idempotent is 'true' under weblogic-ejb-jar.xml as below.
    <stateless-bean-methods-are-idempotent>true</stateless-bean-methods-are-idempotent>
    So please somebody help us on this issue like how to prevent in some other way.
    Regards,
    Dinesh.

    I have no idea why you would think changing your EJB configuration would have anything to do with preventing double submission at your servlet layer.
    One technique I've seen for preventing double submission was first used in the Struts framework several years ago. When a page is "prepared" for display, a token value is created and stored in the session. The page is displayed with a hidden field containing that value. When the page is submitted, the value of the hidden field is compared with the value stored in the session. If they're not equal, the submission is ignored.

  • Error deploying Struts 1.1 on weblogic 6.1 sp2

    Hello,
    I am trying to deploy the struts-documentation.war that comes with struts 1.1
    on weblogic 6.1 sp2.
    I already have xerces.jar , xalan.jar and crimson.jar in WEB-INF/lib. I have also
    tired giving the files in the weblogic classpath.
    It does not deploy the application and it gives the following error:
    ####<Jul 13, 2004 2:26:44 PM IST> <Debug> <HTTP> <phinwo-w00206>
    <myserver> <ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'>
    <system> <> <101158> <Exception thrown while loading struts-documentation:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1>
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    at java.lang.String.substring(String.java:1525)
    at
    weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
    at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
    at
    weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
    at
    weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:177)
    at
    weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3405)
    at
    weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
    at
    weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
    at
    weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
    at
    weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
    at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
    at weblogic.j2ee.Application.addComponent(Application.java:163)
    at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
    at
    weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy29.addWebDeployment(Unknown Source)
    at
    weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
    at
    weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy64.addTarget(Unknown Source)
    at
    weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
    at
    weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy5.update(Unknown Source)
    at
    weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
    at
    weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at
    weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
    at
    weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
    at
    weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ####<Jul 13, 2004 2:26:44 PM IST> <Error> <J2EE> <phinwo-w00206>
    <myserver> <ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'>
    <system> <> <160001> <Error deploying application struts-documentation:
    Could not load struts-documentation>
    ####<Jul 13, 2004 2:26:44 PM IST> <Error> <Management> <phinwo-w00206>
    <myserver> <ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'>
    <system> <> <141042> <Error deploying application
    .\config\mydomain\applications\struts-documentation.war:
    java.lang.reflect.UndeclaredThrowableException>
    Any help in this regard will be highly appreciated.

    I'm also running Weblogic 6.1 SP2 and getting a very similar error during startup when trying to deploy JSTL (Apache's version 1.0.6 from here http://jakarta.apache.org/taglibs/) in an exploded application that starts up fine if I remove the JSTL jars from WEB-INF/lib.
    The exact stack trace in my case is this:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    at java.lang.String.substring(String.java:1525)
    at weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
    at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
    at weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
    at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:234)
    at weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3407)
    at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
    at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
    at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
    at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
    at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
    at weblogic.j2ee.Application.addComponent(Application.java:163)
    at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
    at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy31.addWebDeployment(Unknown Source)
    at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
    at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:279)
    at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:233)
    at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:193)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy30.updateDeployments(Unknown Source)
    at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:2761)
    at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:370)
    at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:160)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
    at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
    at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
    at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
    at $Proxy41.start(Unknown Source)
    at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:480)
    at weblogic.management.Admin.startApplicationManager(Admin.java:1180)
    at weblogic.management.Admin.finish(Admin.java:590)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
    at weblogic.Server.main(Server.java:35)

  • Weblogic 8.1 SP2 ORA-01000 caused by Weblogic's pending XA recovery process.

    Hi, we are migrating our application from Weblogic 6.1 SP5 to Weblogic 8.1
    SP2 and we are facing the nasty ORA-01000 problem.
    After tracking it for some days we happened to find "what" was causing it.
    After issuing the following select on an Oracle instance used by a weblogic
    running for a day
    SELECT sql_text,count(*) FROM V$OPEN_CURSOR
    GROUP BY sql_text
    ORDER BY sql_text
    and this is what we get::
    SQL_TEXT COUNT(*)
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN' 2
    ALTER SESSION SET NLS_TERRITORY = 'AMERICA' 2
    SELECT 1 FROM DUAL 2
    SELECT VALUE FROM NLS_INSTANCE_PARAMETERS WHERE PARAMETER =' 2
    SELECT count (*) FROM SYS.DBA_PENDING_TRANSACTIONS 2
    SELECT formatid, globalid, branchid FROM SYS.DBA_PENDING_TRA 2669
    SELECT max(version) FROM "SYS"."JAVA$POLICY$SHARED$TABLE" 2
    begin :1 := JAVA_XA.xa_commit_new (:2,:3,:4,:5); end; 2
    begin :1 := JAVA_XA.xa_end_new(:2,:3,:4,:5); end; 2
    begin :1 := JAVA_XA.xa_start_new(:2,:3,:4,:5,:6); end; 2
    insert into javasnm$(short, longname, longdbcs) values(:1,:2 2
    select longname from javasnm$ where short = :1 2
    (In fact there are two Weblogic instances running against the same Oracle
    instance and as we didn't filtered by connection I supouse that's why
    numbers "seem" to be "duplicated")
    We do currently have 1500 cursors max declared for session in our Oracle's
    ora.init file.
    After activating Weblogic's jdbc.log we have seen that with an interval of 5
    seconds the
    SELECT formatid, globalid, branchid FROM SYS.DBA_PENDING_TRANSACTIONS
    is issued against the DBMS.
    After executing both selects on an SQLPLUS console we have seen that the
    SELECT count(*)... sentence returns 1 and after looking at
    SYS.DBA_2PC_PENDING table there is one transaction on it (although it was
    already manually rollback forced three months ago). I know we should delete
    already forced transactions in order to clean up that table but the fact is
    we didn't and maybe that is what is causing Weblogic issuing the second
    select (the SELECT formatid, globalid... one) periodically.
    A number of questions come to our mind:
    1. Is this Weblogic's correct behaviour? I mean, is it normal for weblogic
    to issue this select every five seconds?
    If yes.
    2. Why is this select leaving opened cursors? I presume that this select is
    being executed within a transaction and it's neither commited nor rolledback
    If actually it is being executed within a transaction then:
    3. Why is Weblogic opening a transaction to issue a select?
    As additional info we have two datasources configured into our weblogic
    server, I must say we do use TopLink as our persistence manager and it
    requires both transactional (XA) and not transactional datasources to work.
    We are using Oracle thin drivers (classes12.zip) to connect to an Oracle
    8.1.7 database instance. I know that Weblogic 8.1 now ships with the
    ojdbc14.jar Oracle thin driver classes but we are not sure if we can use it
    with Oracle 8.1.7 (as it seems to be prepared to be used with Oracle 9.0.2.
    Is it?).
    Looking at jdbc.log we can also see this at the beginging of the file:
    java.sql.SQLException: SQL operations are not allowed with no global
    transaction by default for XA drivers. If the XA driver supports performing
    SQL operations with no global transaction, explicitly allow it by setting
    "SupportsLocalTransaction" JDBC connection pool property to true. In this
    case, also remember to complete the local transaction before using the
    connection again for global transaction, else a XAER_OUTSIDE XAException may
    result. To complete a local transaction, you can either set auto commit to
    true or call Connection.commit() or Connection.rollback().
    I have readed somewhere at edocs.bea.com that Weblogic 8.1 -by default-
    begins a transaction whenever using an XA connection (as some XA drivers
    require a transaction to be started when using them, although IIRC this can
    be disabled on Weblogic's console). If in fact it happens that we can
    disable the default transaction oppening when using an XA connection, is it
    safe? Is there a prefered way to solve this than disabling the transaction
    "auto begining" feature?
    I think there is also possible to disable Weblogic's pending transactions
    auto-recover mechanism but we think this is a great Weblogic feature and we
    would prefer not having to do it. As in two years we have managed to get
    about three of them due to unexpected server crashes (even if it those cases
    Weblogic 6.1 didn't managed to recover them at least it showed the problem
    on the log).
    Thanks if advance.
    Regards.
    Ignacio.

    Seems that removing classes12.zip from the classpath solves the problem. I
    don't get that periodic error any more so now I don't get the ORA-01000. I
    still seeing -from time to time- the "SQL operations are not allowed with no
    global
    transaction by default for XA drivers" error in the jdbc.log though, so I
    presume the ORA-01000 would raise sooner or later but now with a much larger
    period after starting the server.
    Well there seems that ojdbc14.jar has not so subtle changes. Let's hope
    there are not "newer" issues with it that would not happen with
    classes12.zip.
    Ignacio.

  • Weblogic 6.0 sp2: War deployment not working !!

    Hi,
    I'm using weblogic 6.0 sp2, and it seems as though the war deployment is not
    working. My war consists of jsps, images, and under the WEB-INF/classes
    directory, Struts classes (i.e. Form and Action classes). When I try to run
    a jsp, i get the following error :
    <Jul 30, 2001 11:48:10 AM PDT> <Error> <HTTP>
    <[WebAppServletContext(4655498,ati
    nera)] Root cause of ServletException
    javax.servlet.jsp.JspException: Exception creating bean of class
    com.atinera.log
    in.web.LoginForm: java.lang.ClassNotFoundException:
    com.atinera.login.web.LoginF
    orm
    But if you look in the war, that class is in there.
    What gives ?
    Thanks,
    Jamie

    That's right - ActionServlet does Class.forName(actionClass) to load action
    class, and this uses ClassLoader which loaded the current class (ActionServlet)
    ClassLoaders always delegate to their parent before attempting to load
    the class themselves, so it wasn't working until you moved struts.jar to your
    WEB-INF/lib.
    BTW, Struts doc mentions this problem:
    lib/struts.jar - This JAR file contains all of the Java classes included
    in Struts. It should be copied into the WEB-INF/lib directory of your web
    application. WARNING - If you are going to be hosting multiple Struts based
    applications on the same servlet container, you will be tempted to place the
    struts.jar file into the shared repository supported by your container. Be
    advised that this will like cause you to encounter ClassNotFoundException
    problems unless all of your application classes are stored in the shared
    repository.
    Jamie Tsao <[email protected]> wrote:
    So I found the solution to this problem, but it doesn't really make sense to
    me.
    I originally had struts.jar outside of the WAR file, but in my CLASSPATH.
    Weblogic was able to load Strut's ActionServlet (controller), but when the
    ActionServlet was looking for the LoginForm (which was inside the WAR), it
    couldn't find it.
    I solved the problem by putting struts.jar inside the WAR (under
    WEB-INF/lib) instead that other directory. Now it works cause apparently
    ActionServlet is now in the same classloader as LoginForm, the classloader
    which loaded the WAR.
    I'm confused because original way should have worked since the classloader
    that loaded struts.jar from outside the war is the parent classloader for
    the classloader that loaded the WAR. did that make any sense ?
    anyone know why ?
    thanks,
    jamie
    "Jamie Tsao" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I'm using weblogic 6.0 sp2, and it seems as though the war deployment isnot
    working. My war consists of jsps, images, and under the WEB-INF/classes
    directory, Struts classes (i.e. Form and Action classes). When I try torun
    a jsp, i get the following error :
    <Jul 30, 2001 11:48:10 AM PDT> <Error> <HTTP>
    <[WebAppServletContext(4655498,ati
    nera)] Root cause of ServletException
    javax.servlet.jsp.JspException: Exception creating bean of class
    com.atinera.log
    in.web.LoginForm: java.lang.ClassNotFoundException:
    com.atinera.login.web.LoginF
    orm
    But if you look in the war, that class is in there.
    What gives ?
    Thanks,
    Jamie
    Dimitri

  • Installing locales for portal SP2 and SP3

    I need help installing japanese locales for portal SP2 and SP3. I have
    found some documentation and have done the pkgadd but i have yet to be
    able to get it to work properly.
    any ideas

    Hi Mathis,
    To install Japanese locale do the following:
    1) Untar the Japanese Language Package (desktoppackage.tar)into a directory (/opt/desktoppackage).
    #tar -xvf <Package_name>
    2) Do a pkgadd to install the Japanese language and follow the instructions thereafter.
    #pkgadd -d . SUNWwtdjp
    3) Restart both the Portal Server and Gateway.
    To check the Locale:
    1) Goto Desktop Servlet and User Information Channel.
    2) Click edit and scroll down to Locale Information. You must see the Japanese language included here.
    3) Select Japanese locale and click "Finish" button.
    4) Log out and return to desktop.
    This must help you out in configuring Japanese Locale.
    Cheers,
    raj_slash.

  • WebLogic 6.1 sp2 does not allow Anonymous LDAP Binding

    Hi,
    I am trying to setup LDAP on WebLogic 6.1 SP2 and it refuses to bind
    anonymously
    to our iPlanet LDAP server.
    If I specify an admin user that is in LDAP there isn't a problem, all
    authentication works fine. Anonymous binding works find from
    ldapsearch, PeopleSoft, etc ...
    My config.xml definition is below, am I missing something ?
    <CustomRealm
    ConfigurationData="user.filter=(&(uid=%u)(objectclass=person));serve
    r.authprotocol=none;user.dn=ou=People,ou=Internal,ou=Clients,o=mycorp;server.p
    rincipal=uid=admin,ou=People,ou=Internal,ou=Clients,o=mycorp;membership.fil
    ter=(&(uniquemember=%M)(objectclass=groupofuniquenames));group.filter=(&
    (cn=%g)(objectclass=groupofuniquenames));server.host=ldap.mycorp.com;
    group.dn=ou=Groups,ou=Internal,ou=Clients,o=mycorp"
    Name="UMDSv2"
    Notes="This is provided as an example. Before enabling this
    Realm, you m
    ust edit the configuration parameters as appropriate for your
    environment."
    Password="{3DES}lwSDdYvmhJClhXHELTDQlA=="
    RealmClassName="weblogic.secur
    ity.ldaprealmv2.LDAPRealm"/>
    Thanks,
    Kim

    Hi,
    I am trying to setup LDAP on WebLogic 6.1 SP2 and it refuses to bind
    anonymously
    to our iPlanet LDAP server.
    If I specify an admin user that is in LDAP there isn't a problem, all
    authentication works fine. Anonymous binding works find from
    ldapsearch, PeopleSoft, etc ...
    My config.xml definition is below, am I missing something ?
    <CustomRealm
    ConfigurationData="user.filter=(&(uid=%u)(objectclass=person));serve
    r.authprotocol=none;user.dn=ou=People,ou=Internal,ou=Clients,o=mycorp;server.p
    rincipal=uid=admin,ou=People,ou=Internal,ou=Clients,o=mycorp;membership.fil
    ter=(&(uniquemember=%M)(objectclass=groupofuniquenames));group.filter=(&
    (cn=%g)(objectclass=groupofuniquenames));server.host=ldap.mycorp.com;
    group.dn=ou=Groups,ou=Internal,ou=Clients,o=mycorp"
    Name="UMDSv2"
    Notes="This is provided as an example. Before enabling this
    Realm, you m
    ust edit the configuration parameters as appropriate for your
    environment."
    Password="{3DES}lwSDdYvmhJClhXHELTDQlA=="
    RealmClassName="weblogic.secur
    ity.ldaprealmv2.LDAPRealm"/>
    Thanks,
    Kim

  • JSF and weblogic 8.1 sp2??  Please help!

    Hello All -
    We are part of a small team here in SF at a biotech company... they have given us the green light to use JSF on a small project.
    Only problem is that we must deploy to Weblogic 8.1 SP2 & I can't get JSF to work on Weblogic 8.1 SP2.
    I get strange errors -- an inability to control navigation. The simple "hello world" app that comes with the Manning book "Javaserver faces in Action" does not work on WL 8.1 SP2. It does however work on Tomcat.
    I have even written a hack servlet that starts the listener manually that is needed for JSF to work. (http://forum.java.sun.com/thread.jspa?threadID=499690&start=15&tstart=30)
    Any ideas on this? We are getting desperate with a deadline looming Thursday. Want to make this work & not have to go back to Struts.
    One blog I saw said that what is needed is a Weblogic patch. Anyone know anything about this? (http://jroller.com/page/RickHigh/20040929)
    Thank you-
    Matt

    I'm trying to get a JSF web app I have working on
    tomcat ported to weblogic 8.1 sp2.
    When I deploy the webapp I get the following
    exception.
    I get the same exception when I try to deploy the JSF
    sample cardemo.war. (I've tried both JSF1.0 and JSF
    1.1, both result in the same error).Hello Kieth,
    Have you considered this content from the README:
    * Some web containers (Notably BEA WebLogic Server) don't follow the
    JSP 1.2 Spec rule of calling ServletContextListeners listeners defined
    in tld files in the META-INF directory of a jar. Running a faces
    webapp in such a container requires you to manually declare the
    ServletContextListener. The listener-class you need to specify is
    com.sun.faces.config.ConfigureListener
    Ed (EG Member)

  • How to use call back and user session id based conversation with web service in weblogic 6.1 sp2 ?????????

    Hi, every one:
    Here's my question of my day - >>>
    I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
    I got a web service up and running called Price Update web service through
    which user can pick up a price and push a deal to another web service
    called: deal service, the deal service will take the user deal and book the
    deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
    then send the confirmation to another JMS Queue ), then the confirmation
    will be picked up and sent to another web service , called: User Deal
    Confirmation Service, here's the question:
    1. Since the client application is only allowed to see its own confirmed
    deals, how I can make the confirmed deal encrypted based on a server
    generated key or the session id that client application provides
    2. Now, I have 3 webservices: update, deal and confirm, each of them has a
    client.jar file available - from the client application point of view, do I
    need all these 3 client.jar, or I just need one of them ?????
    3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
    beta, you can do this easily in the workshop, in the second question above,
    I think I need some how relate the confirmation to the client conversation
    id ??
    thanks a lot for the input, have a nice day.
    regards,
    mark.

    Any comments ?
    mark
    "markhu" <[email protected]> wrote in message
    news:[email protected]..
    Hi, every one:
    Here's my question of my day - >>>
    I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
    I got a web service up and running called Price Update web service through
    which user can pick up a price and push a deal to another web service
    called: deal service, the deal service will take the user deal and bookthe
    deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
    then send the confirmation to another JMS Queue ), then the confirmation
    will be picked up and sent to another web service , called: User Deal
    Confirmation Service, here's the question:
    1. Since the client application is only allowed to see its own confirmed
    deals, how I can make the confirmed deal encrypted based on a server
    generated key or the session id that client application provides
    2. Now, I have 3 webservices: update, deal and confirm, each of them has a
    client.jar file available - from the client application point of view, doI
    need all these 3 client.jar, or I just need one of them ?????
    3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
    beta, you can do this easily in the workshop, in the second questionabove,
    I think I need some how relate the confirmation to the client conversation
    id ??
    thanks a lot for the input, have a nice day.
    regards,
    mark.

Maybe you are looking for

  • Help would be appreciated!

    Hello there. I've had lots of issues with iPod in the past...I got my first one last April for my birthday, and I dropped it within the first two months. I went to the Apple store and they replaced it, and all was fine and dandy. Then repeat this exp

  • How to reverse AFS MRP

    Hi, Iu2019m using make to order concept and I created a sales order for a finish goods material. Raw materials are attached to the finish good material in the BOM.   Sales order quantity display in the blocked tab of the AFS MD04 screen. I ran the AF

  • Wi-Fi or Network Connection - Explainati​on for Newbies (Like me)

    Myself and my wife Marlene have recently been converted to the BB World. We both bought 8900 Curves, on the same day, and both with BB data plans and Internet browsing plans included. The only difference between the two handsets is mine is from Orang

  • Installing printers from a VBScript HTA

    Hi,  I have just started with VBScript, and I'm trying to make a simple portal for printer installation. The problem is that we have a setup with different printservers, with printers with some standard names. So the HTA lets you choose where you sit

  • Problem starting db installation

    Hello all: I need help to install Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows that I've allready downloaded from OTN. After the folder has been unzipped, I tried to run setup, but all it does is showing the black screen then a po