Help required in Code understanding

Hi,
I am having the following code in a program.Please help me understand this. On F5 the 'fields' table get populated.
Where and how does it fetch data ?
system-call ict
    did
      ihttp_scid_get_header_fields
    parameters
      m_c_msg                            " > c handle
      fields                             " > header fields table
      m_last_error.                      " < return code
Thanks,
Amit

Press F1 on the system-call.
From SAP Help:
<b>SYSTEM-CALL</b>
This statement is only for
!!! Internal use in SAP Basis development !!!
Even within SAP Basis, it may only be used in programs within the ABAP+GUI development group.
Its use is subject to various restrictions, not all of which may be listed in the documentation. This documentation is intended for internal SAP use within the Basis development group ABAP+GUI.
Changes and further development, which may be incompatible, may occur at any time, without warning or notice!
Regards,
Prakash.

Similar Messages

URGENTLY REQUIRE A CODE FOR FOLLOWING--WOULD BE GREAT HELP

HOW TO VALIDATE XML FILE USING SAX PARSER WITH SCHEMAS like .XSD FILES

Mankjas wrote:
URGENTLY REQUIRE A CODE FOR FOLLOWING--WOULD BE GREAT HELPNo, it wouldn't be a great help, as the next time you needed to do something like this you'd still be lost.
And no one here is just simply going to give you code anyway. We'll help you correct yours, and give you advice and tips, but we are not going to do your work for you. And urgent it is not, not to us. And your insisting that it is, is rude. We definately are not going to drop everything we might be doing to "help" you, especially when your essentially demanding that we do your work for you, with no effort on your part, besides.

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
     int player1;
     int player2;
     public PlayGame()
          //this.player1 = player1;
          //this.player2 = player2;
     public void StartGame()
     try{
     // int X = 0, Y = 0;
     //int value;
     int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
     int[][] ConnectFourArray = new int[6][7];
     int num1, num2;
     for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
     //Player player1;
     //Player player2;
     public ClassConnectFour()
          //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Applet help required

I have created an applet that displays a date but i cannot get this applet to work in my website, What am I doing wrong?
this the code
package DisplayTheDate;
import java.awt.*;
import java.applet.*;
import java.util.*;
import java.applet.Applet;
public class getthis extends Applet {
public void init() {
String theDate;
Date getdate = new Date();
theDate = getdate+".";
setLayout(new BorderLayout());
Panel t = new Panel();
t.setLayout(new GridLayout(1,1));
t.add(new Label(theDate));
add("Center", t);
public static void main(String args[]){
Frame f = new Frame("display Date");
getthis ce = new getthis();
ce.init();
f.add("Center", ce);
f.pack();
f.show();
in the website
<html>
<title>
This is the date class
</title>
<body>
<center>
<applet code="C:\JBuilder3\myprojects\untitled10\getthis.class">
</applet></center>
</body>
</html>
please help!

I dont understand what you are saying, I have followed
the example to a T but with no luck!If you had followed it to a T it would be working already ;) You must have made a silly mistake somewhere. Try again.
By the way, not only is the code attribute wrong in your html, you are also missing the required width and height attributes that specify the size of the applet on screen.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Scenario mapping - help required

Scenario:
A Customer sends a material (for e.g., SUGARCANE) to the company (SAP Implementing). It processes it and send back as SUGAR.
The customer is charged for the services rendered.
The stock of sugarcane/sugar should be visible in the system.
Please guide me how to map this scenario.
I will be very much grateful.
Regards,
Anbu

This sales process is referred as Job Work in SAP.
Refer following SDN thread that can be helpful to you in understanding / reference:
- Sales Process of JOB WORK
If in case you have any concern or doubt about the process, do revert back.
But don't forget to put a effort search more information on JOB WORK for reference/understanding. So that you can specific to your requirement.
Regards
JP

Help required in writing And Reading Xml From Database

Hi
i m new to java.
i m facing problem while writing Xml file from Mysql Database in java i m using the WebRowSet
and also for Reading WebRowSet
after reading the Xml i have to save this in Database
(required source code)
is there any one to help me in this way
regards
aamir

shadab_think_globally wrote:
{noformat}*hi everybody,
please send me a ajax with jsp application
suppose i enter a word in text area ajax will populate/suggest all string from database ,who started
from that entering character(s).like a google string search.
please send full source code
*{noformat}how about you do it yourself?

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help with Flash code in web page

I have a Flash file in the masthead of my web site that shows
a slideshow. I want to code the page so that if the viewer doesn't
have Flashplayer, an alternative jpeg comes up in the masthead
instead of the file with the flash slideshow. I'm afraid I'm new to
most of this.... I'd very much appreciate help with the
programming.
Thank you!
Here's the file:
http://www.ewgaphilly.com/cs3index.html
(the slide show isn't working at the moment -- a server issue). The
alternate file I want to put in is:
http://www.ewgaphilly.com/alternate_mast.jpg

I'm sorry to be so dull on this, but I'd appreciate if you
could tell me specifically which is the embed code (the codes in
the <head>? What to I change here? I really appreciate your
help.
Here is what I get when I publish the movie and the open the
html file:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>main_slideshow_philly</title>
<script language="JavaScript" type="text/javascript">

</script>
<script language="VBScript" type="text/vbscript">

</script>
<script language="JavaScript1.1"
type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">


<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not
support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Macromedia Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>
Here is my existing code in my home page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>EWGA Greater Philadelphia Executive Women's Golf
Association</title>
<style type="text/css">

</style>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
<style type="text/css" media="screen">

</style>
<script type="text/javascript"
src="p7tbm/p7tbmenu.js"></script>
</head>
some other stuff goes in here!!
then...
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','780','height','444','title','EWGA
Greater
Philadelphia','src','/main_slideshow_philly','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','/main_slideshow_philly'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="780" height="444" title="EWGA Greater Philadelphia">
<param name="movie" value="/main_slideshow_philly.swf"
/>
<param name="quality" value="high" />
<embed src="/main_slideshow_philly.swf" quality="high"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="780"
height="444"></embed>
</object>
</noscript>

Help with Exit Code: 7

Install Flex 4
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
WARNING: Memory requirements not met for {74EF259F-1DC6-4DEE-866B-0707173D7654}
ERROR: Custom Action for payload {74EF259F-1DC6-4DEE-866B-0707173D7654} Adobe Flash Builder returned error. Failing this payload.
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Builder: Install failed
My Pc
Pentium D CPU 2.80GHz, 2.80GHz
992 MB in RAM
HDD: 38.0GB, Used: 23.3GB, Free: 14.7GB
Sistem
Microsoft Windows XP Pro.
Ver. 2002
Service Pack 3
Help to install tehe Flex Build 4, plase.

Hi,
I had a similar problem (see error details below) installing on Windows 7 Professional using a domain account which is in the local admin group. I think my problem was due to an @ character in one of the following environment variables:
APPDATA=C:\Users\my_username@my_company.com\AppData\Roaming
HOMEPATH=\Users\my_username@my_company.com
LOCALAPPDATA=C:\Users\my_username@my_company.com\AppData\Local
USERPROFILE=C:\Users\my_username@my_company.com
I solved the problem by creating a local account with a plalin alphabetical username, adding it to the local administrator group and re-running the installer under that account by right clicking and selecting "Run as Administrator".
I got this idea from the following blog posts:
http://www.niallodoherty.com/post.cfm/adobe-flash-builder-4-installation-error-exit-code-7
http://www.joebillman.com/blog/2010/04/flash-builder-4-install-error/
Hope that helps,
Carl
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: Custom Action for payload {74EF259F-1DC6-4DEE-866B-0707173D7654} Adobe Flash Builder returned error. Failing this payload.
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Builder: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed

Need help with WMI code that will send output to db

'm new to WMI code writing, so I need some help with writing code that we can store on our server. I want this code to run when a user logs into their computer
and talks to our server. I also want the code to:
* check the users computer and find all installed patches
* the date the patches were installed
* the serial number of the users computer
* the computer name, os version, last boot up time, and mac address
and then have all this output to a database file. At the command prompt I've tried:
wmic qfe get description, hotfixid
This does return the patch information I'm looking for, but how do I combine that line of code with:
wmic os get version, csname, serialnumber, lastbootuptime
and
wmic nicconfig get macaddress
and then get all this to output to a database file?

Thank you for the links. I checked out http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx and
found lots of good information. I also found a good command that will print information to a text file.
Basically what I'm trying to do is retrieve a list of all installed updates (Windows updates and 3rd party updates). I do like that the below code because it gives me the KB numbers for the Windows updates. I need this information so my IT co-workers &
I can keep track of which of our user computers need a patch/update installed and preferably which patch/update. The minimum we want to know is which patches / updates have been installed on which computer. If you wondering why we don't have Windows automatic
updates enable, that's because we are not allowed to.
This is my code so far.
#if you want the computer name, use this command
get-content env:computername
$computer = get-content env:computername
#list of installed patches
Get-Hotfix -ComputerName $computer#create a text file listing this information
Get-Hotfix > 'C:\users\little e\Documents\WMI help\PowerShell\printOutPatchList.txt'
I know you don't want to tell me the code that will print this out to a database (regardless if it's Access or SQL), and that's find. But maybe you can tell me this. Is it possible to have the results of this sent to a database file or do I need to go into
SQL and write code for SQL to go out and grab the data from an Excel file or txt file? If I'm understanding this stuff so far, then I suspect that it can be done both ways, but the code needs to be written correctly for this to happen. If it's true, then which
way is best (code in PowerShell to send information to SQL or SQL go get the information from the text file or Excel file)?

Error: Making this change would require changing code that is locked....

DWCS3
Rebuilding site -- I know this is a common problem, but what are the steps to resolve it?
Error: "Making this change would require changing code that is locked by a template or a translator. The change will be discarded."
Click OK and the change is made anyway, oftentimes resulting in loss of document CSS and dynamic code, which is then unretrievable. EXTREMELY FRUSTRATING!!!
There is another code at the top of all documents using the template:
""
However, this line has always been in my previous documents and created no problem.
The oddest thing is, I can be in an editable region of a document, click on an image to edit in Fireworks, edit, click DONE and it comes back in DW with that error. ???

Looking at DW preferences, I found two Fireworks editors listed for .png, .gif, and .jpg. Maybe that was causing a problem.
Don't know if this will help, but....
Here is sort of what my template code looks like:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">

        <head>
       
<meta name="keywords" content="blah blah blah" />
<meta name="description" content="blah blah blah/>
<meta name="robots" content="noarchive, nofollow" />
<meta http-equiv="pragma" content="no-cache" />
<meta http-equiv="cache-control" content="no-cache" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<meta name="google-site-verification" content="8KWIMcjzjngBlH7XsAnwF4W5M_novbbavDYWk2YIZgk" />
<link rel="shortcut icon" href="/favicon.ico" />
          
    
<title>document title</title>
          
                
                <link href="../CSS/file.css" rel="stylesheet" type="text/css" />
                <link href="../CSS/file.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">

</script>
        
</head>
Here's code from a document using the template:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">

        <head>
       
<meta name="robots" content="noarchive, nofollow" />
<meta http-equiv="pragma" content="no-cache" />
<meta http-equiv="cache-control" content="no-cache" />
          
    
<title>my document title</title>
<script type="text/javascript">
function toggleMe(a) {
var e=document.getElementById(a);
if(!e)return true;
if(e.style.display=="none") {
e.style.display="block"
else{
e.style.display="none"
return true;
</script>
                
                <link href="CSS/file.css" rel="stylesheet" type="text/css" />
                <link href="CSS/file.css" rel="stylesheet" type="text/css" />
        <script type="text/javascript">

</script>
<style type="text/css">

                 </style>

</head>

E63-update firmware require lock code.

E63-1 after update to new firmware 500.12.009 success. when it restart and login to OS, it's require the lock code. but i type the code 12345 is code error.
i dont change the phone code from i buy this phone. so how can i find the correct code?
please help.

The default code is usually 12345 unless it was changed by either the network or the user. If it is changed by the networks then it should be on the label on the box. If you changed it and don;t remember it, the only way to reset it is to send it to a Nokia Care Point. You will need to bring proof of purchase with you.

Difference between Search Helps and Match Codes?

Difference between Search Helps and Match Codes?

Serch help
Search Helps
The input help (F4 help) is a standard function of the R/3 System. The user can display the list of all possible input values for a screen field with the input help. The possible input values can be enhanced with further information. This is meaningful especially when the field requires the input of a formal key.
Standard Input Help Process
A user calls an input help with the following steps (some steps can be omitted, depending on the definition of the input help):
The user starts the input help to display the possible input values for a field (search field) in a screen template.
The system offers the user a number of possible search paths. The user selects one of these search paths. Each search path offers a number of restrictions to limit the number of possible input values. These values are offered in a Dialog box for value restriction when the search path is selected.
The user enters restrictions if required and then starts the search.
The system determines the values that satisfy the entered restrictions (hits) and displays them as a list (hit list).
The user selects the most suitable line from the hit list by double-clicking.
The value of the search field is returned to the screen template (possibly together with other values).
Steps 2 and 3 are omitted if there is only a single search path available. In this case the dialog box for the value selection is offered immediately. You can also output the hit list directly after starting the input help. Steps 2 to 4 are omitted in this case.
Function of a Search Help
This standard process can be completely defined by creating a search help in the ABAP Dictionary. This search help only has to be assigned to the screen fields in which they should be available (see Attaching Search Helps to Screen Fields).
There are two types of search help:
Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
See also:
Example for Search Helps
Creating Elementary Search Helps
Creating Collective Search Helps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Match code
Match code is nothing but the Search help in Higher versions
It is same way from SE11 you have to create.
so from SE11 create it and use it.
Matchcode objects are being replaced by search helps. This is good as search helps are easy to create. However, it has caused some confusion on how best to add search helps to a selection field.
The trick that I found is to keep your newly created search helps to a 4-character name. The Matchcode object name has this old 4-character limit. This trick is not documented anywhere in the system but it has been a great time saver for me. You can expand this concept by finding existing SAP search helps that are more than 4-characters, copy them to a 4-character name and presto, you have a new matchcode object available for use
Check this thread to get detailed info
Match Code Objects
Match code
match code
match code
Match code
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ef46446011d189700000e8322d00/content.htm
Rewards if useful.................
Minal
http://web.mit.edu/sapr3/docs/webdocs/dontindex/pdf/mcqc.pdf

Help required in Code understanding

Similar Messages

Maybe you are looking for