Help: Standalone application does not run (Error #-10007), but development application does

I'm hoping that someone can tell me what I'm doing wrong. I'm using LabView 6.1 together with NI-DAQ v6.9.2 to build an application that generates different voltages on the output channels of a PCI-6704 card. Everything works fine in my development environment. I then use the application builder to create a standalone application. I include the LabView Run-Time Engine in the installer. However, when I install the application on the target machine and try to run it, I get Error # -10007 at AO Group Config.vi. (My application uses the AO Write One Update vi.)
If I install LabView 6.1 on the target machine and copy over all my VI's to the machine, they run as expected.
Can anyo
ne shed some light on what I may be doing wrong?

Hi Roger
I don't see in your question if you've installed NI-DAQ- It's important to know that you have to install all needed drivers separately on your target machine. In your case you have to install NI-DAQ on your target machine too and configure the board.The drivers are not automatically included into the installer.
If you're doing an custom installation of LV on your target machine, than NI-DAQ will be installed too. You should be able to run than your executable. (If you've LV still installed on the target, than you can try this out!)
Luca P.
Regards,
Luca

Similar Messages

KIMYONG: "Service Component Container Not Running" error 시 조치사항

KIMYONG: "Service Component Container Not Running" error 시 조치사항
Purpose
WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
이를 조치하는 방법은
ERROR
CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
"THE SERVICE ERROR COMPONENT CONTAINER"
Solution
전체적인 절차는 아래와 같습니다.
1. apache 를 bounce 합니다.
2. Workflow Mailer Service를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Mailer Service link (Container column)
e. Select Workflow Mailer Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Mailer service is "Activated"
3. Workflow Agent listener Service 를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Agent listener Service link (Container column)
e. Select Workflow Agent listener Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Agent listener service is "Activated"
4. Workflow Mailer를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Notification Mailers icon
d. Select Workflow Notification Mailer
e. Select Start from the list of values (top)
g. Click on go.
h. Do the same for the workflow deferred agent listener
Reference
Note 559388.1

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

We are trying to install elements 11 but the program will not run error 213:11

we are trying to install elements 11 but the program will not run error 213:11

http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

Flash not running in FF but runs in IE and Chrome

Hello:
I am having an issue with Flash not running in Firefox but it is running in IE and Chrome. The main url is http://www.mcafee.com/us/campaign/network-security/virtualized-data-center.html on which there is a section called "ROI Calculator". The download button links to a flash program which opens up
in IE and Chrome but does not open in Firefox. I am using windows 7 professional and Firefox 8. Here is the code for the page http://www.mcafee.com/us/resources/roi/brocade-mcafee-tco/roi-brocade-mcafee-tco.html :

<html lang="en">

<head>
<meta name="robots" content="noindex,nofollow">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
<script type="text/javascript" src="http://s7.addthis.com/js/200/addthis_widget.js"></script>
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
function openAddThisWindow(v1,v2,url)
                return addthis_open(this, 'email' );
</script>

<link rel="stylesheet" type="text/css" href="history/history.css" />

<title></title>
<script src="AC_OETags.js" language="javascript"></script>

<script src="history/history.js" language="javascript"></script>

<style>
body { margin: 0px; overflow:hidden }
</style>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body scroll="no">
<script language="JavaScript" type="text/javascript">

</script>
<noscript>
      <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
            id="Brocade_ROI" width="100%" height="100%"
            codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
            <param name="movie" value="Brocade_ROI.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="#869ca7" />
            <param name="allowScriptAccess" value="sameDomain" />
            <embed src="Brocade_ROI.swf" quality="high" bgcolor="#869ca7" width="100%" height="100%" name="Brocade_ROI" align="middle" play="true" loop="false"            quality="high" allowScriptAccess="sameDomain" type"application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer"></embed>
    </object>
</noscript>

<script language="javascript" type="text/javascript" src="http://www.mcafee.com/common/js/s_code-20110804.js"></script>
<script language="javascript" type="text/javascript">
    s.pageName="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.pageName=s.pageName.toLowerCase();
    s.channel="corp:en-us:direct:resources:roi";
    s.eVar21=s.channel=s.channel.toLowerCase();
    s.eVar22="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.prop1=s.eVar22=s.eVar22.toLowerCase();
    s.events="event1";
    s.prop4=s.eVar4="us";
    s.prop5=s.eVar5="en-us";
    s.prop7=s.eVar7="NA";
    s.prop6=s.eVar6="direct";
/************* DO NOT ALTER ANYTHING BELOW THIS LINE ! **************/
var s_code=s.t();if(s_code)document.write(s_code)</script>

</body>
</html>
Thanks in advance for your help.

Too much text :/ I hate generated source - something always goes wrong and you never know what the hell
What about embedding it yourself?
Create empty HTML file, download swfobject.js: http://code.google.com/p/swfobject/downloads/list
And use this block of code. Of course, change name of swf file, width and height. Unpack swfobject.js right next to the html file.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
    <title>SWFObject dynamic embed - step 3</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
    swfobject.embedSWF("myContent.swf", "myContent", "800", "600", "9.0.0");
    </script>
</head>
<body>
    <div id="myContent">
      <p>Alternative content</p>
    </div>
</body>
</html>

ContentAgent not found error OR qmasterd not running error in Compressor

Hi guys,
I have problems with Compressor 3.0.1 (related to qmaster i guess). i red many articles around about "qmasterd not running" or, "ContentAgent not found" error message on Compressor.
I tried to run it from apple qmaster in the preferences system but the same problem. i tried to launch qmasterd in command line ... no success. I erased anything with the name qmaster or compressor (preferences, Applications support, Receips, repaired authorisations, etc...) and made a brand new install from the original DVD).
Before doing that, compressor wasn't even lauching successfully. After this re-install, it is running but i get these errors from one or the other side. I can say that i erased all related files with attention but still do not understand what to do!
on my anotyher mac (intel based 2x3GHz dual core) everything is running fine.
Do someones know what can cause this ? what should i do ? i prefer a solution without beeing obliged to reinstall the whole config!!! oh no!
Thank you for your help, even a small one
Best Regards
Sam

I told myself: let's do it once again and this time ERASE ALL
In my last try, i had forgot to erase compressor.framework folder with all its contents.
Now, it is working just perfect, even the cluster between both computers
Best.R.
Sam

DB13 - Scheduled Update Statistics not run - Error

Hello gurus,
I´m faccing with an error in DB13, I scheduled Update statistics every day but it did not run due an error.
I think this may resulted because an authorization problem.
In /usr/sap is with this permissions:
drwxr-xr-x 15 orad01 dba   4096 Oct 18 16:34 sap
The /oracle/D01/sapcheck is with the following permissions:
drwxr-xr-x 2 orad01 dba     4096 Nov 14 20:28 sapcheck
Inside of sapcheck directory I can see the following files with permissions:
-rw-r--r-- 1 orad01 dba       32262 Oct 14 13:16 ceeimamu.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:42 ceeisafo.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:50 ceeisazq.sta
-rw-r--r-- 1 orad01 dba        1932 Oct 15 17:58 ceeisbie.sta
-rw-r--r-- 1 orad01 dba        1791 Oct 15 22:16 ceeisyhm.sta
-rw-r--r-- 1 orad01 dba        1931 Oct 15 22:24 ceeisyta.sta
-rw-r--r-- 1 orad01 dba    19394261 Oct 15 23:45 ceeiszph.sta
-rw-r--r-- 1 orad01 dba        1930 Nov 9 11:27 ceenjunx.sta
-rw-r--r-- 1 orad01 dba        1790 Nov 9 11:38 ceenjvuv.sta
-rw-r--r-- 1 orad01 dba      143103 Nov 9 11:40 ceenjwnr.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:46 ceeosxxw.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:49 ceeosydo.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:54 ceeosyqi.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 15:57 ceeotefd.sta
-rw-r--r-- 1 orad01 dba       18530 Nov 16 16:27 ceeotgun.sta
-rw-r--r-- 1 orad01 dba         996 Nov 16 16:27 connD01.log
In DB13 at details error, it show the following statements:
Job executado
Etapa 001 executada (program.RSDBAJOB, variante &0000000000016, nome usuário XNSJAD)
Execução do comando lógico BRCONNECT No host segoviad04
Parâmetros: -u / -jid STATS20101123153214 -c -f stats -t ALL
BR0801I BRCONNECT 7.20 (7)
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: ceeqbmqh.sta2010-11-23 15.32.15
BR0280I BRCONNECT time stamp: 2010-11-23 15.32.15
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job encerrado
Can you help me please!? I do not know how to solve this situation...
Best regards,
João Dimas - Portugal

This wasn´t a new installation... this was a migration from windows/sql server to linux/oracle... and after that migration process I made an oracle upgrade to 11.2g and during this oracle upgrade we upgrade the BRtools to 7.20 version.
I set up other job from DB13 (Verify database) and also it not ran well, it show an error too, but a diferent one:
Parameters:-u / -jid VERIF20101110030000 -c force -w only_dbv -p initD01.sap -m ALL
BR0051I BRBACKUP 7.20 (7)
BR0055I Start of database backup: beeqitms.dbv 2010-11-25 03.00.06
BR0484I BRBACKUP log file: /oracle/D01/sapbackup/beeqitms.dbv
BR0477I Oracle pfile /oracle/D01/112_64/dbs/initD01.ora created from spfile /oracle/D01/112_64/dbs/spfileD01.ora
BR0068E SAP system is running or SAP user is connected to database D01 - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: beeqitms.dbv 2010-11-25 03.00.09
BR0280I BRBACKUP time stamp: 2010-11-25 03.00.09
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
I also checked the permissions in /usr/sap folder and sub folders as per the link you put here... and everything is well... but tell me one thing which owner/group must have set in /usr/sap/ directory? In that help sap link it doesn´t show any suggestion in this column, so I don´t know in this case which owner and group must have set... In my case the /usr/sap/ and dba as group:
drwxr-xr-x 28 orad01 dba      4096 Nov 23 15:20 D01
Kind regards,
João Dimas - Portugal

SAP j2ee engine is not running error while applying patches.

Hi all,
Iam in the process of aplpying patches using JSPM tool , for some of them iam getting the error messages , when i checked the log file for this tool it says:
SAP J2ee engine is not running , unable to login to <HOST name> with id <Login id>.
Iam very new to this activity ,can anybody help me in this regard , i wil be very thankful.
Thanks and Regards.
Niyati.

Hi,
What exactly do you see when you say that the status in the MMC is OK? I don't think it can be green if you say that you get a message saying "Service Unavailable" when you try to login. If you get that message, it means that the service hasn't either been started or could not be started in case of an error. In this case the server status in the MMC should be yellow (or gray in case none of the services could be started)...
Could you perhaps check it again? Another point to check would be if the connection to the database is OK. If you are using MySQL MaxDB, you could use the Database Manager tool to check this. Sometimes the log files fill up the database and the server cannot start because the database is full. In such cases you will need to clear the logs and then restart the entire cluster.
Sameer

Get message "application virtualization client svcs not running". error 4625852-0fa10612-00006003

When trying to print an attachment to an email, I get message "application virtualization client svcs not running". Error Code: 4625852-0FA10612-00006003.

I mendoza How you do, sorry to learn that you are having this issue.
specify
What printer do you have?
What Operating system?
What browser are you using?
I will do my best to help share this infomation
Regars:
RobertoR
and remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Creative Zen V Plus - Seeking your help with "Audio format is not supported" error

Hi,
I have a problem with my Creative Zen V Plus and am looking for someone to do a quick test to help me. I listen to a lot of MP3 podcasts, so I often rewind, fast forward or set bookmarks inside tracks. When I do those operations in some tracks, I get the error ?Audio format is not supported? when I ?land on certain places in a track (and I am able to reproduce the problem, which happens always at the same place in a particular track).
Here is what I mean by ?land?. For instance, there is a particular track (see the mp3 link below) that whenever I rewind to exactly 35 min 37 seconds, I get the error ?Audio format is not supported? and playback is stopped. If I fast forward to exactly 35 min 37 seconds, I also get the error. If I set a bookmark to exactly 35 min 37 seconds and I then go to that bookmark, I also get the error. But I don?t get the error if I play the track normally without any rewinding or fast forwarding: the track is played and passes the 35 min 37 seconds mark without any error.
Creative Labs customer support wants me to return my player for repair, but I am not sure if the problem is with my player or if the problem would also be present on other Zen V Plus, thus my asking for your help.
I would appreciate if someone of you could try one of my problematic tracks on their player. Here is what you could do to help me:
1- Download and transfer to your Zen V Plus player the following audio file (it'ss a technology podcast and don?t worry, it'ss virus-free, it comes from CNET):
http://podcast-files.cnet.com/podcas...oud_090808.mp3
2- Go to the 35 min and 37 seconds mark, press PAUSE and set a bookmark there.
3- Go into the Bookmarks menu and go to the bookmark you just set.
4- Do you see the error ?Audio format is not supported?, or the audio plays just fine? If the audio plays just fine, could you tell me what are the first words you hear
when going to that bookmark, just so that I am sure we are indeed doing the same test on each of our side?
5- What firmware version is your player at ?
Thank you very much for any help you could bring me.
Patrick

never mind. figured it out!

SSIS Job deployment does not run my .exe but is described as a success

Hi i have scripted a simple script task in c# to run an exe with the following code
Process.start(filename.exe);
i have also tried using the 'Execute Process task' in the SSIS toolbox.
both methods work when i debug.
However when deployed to the SQL server as a job, the jobs are described as a success but my program does not run?!
The exe file is published from SQL visual studio and the resultant filename is setup.exe which i am trying to run.
Any help pleasE?
I am not using any shared file resources, the setup.exe is on my desktop.

this is all i get
Message Type
Message Time
Message
Message Source Name
Subcomponent Name
Execution Path
OnPostExecute
8/22/2014 4:15:09 PM
Package:Finished, 4:15:09 PM, Elapsed time: 00:00:00.234.
Package
\Package
OnPostExecute
8/22/2014 4:15:09 PM
Execute Process Task:Finished, 4:15:09 PM, Elapsed time: 00:00:00.203.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Execute Process Task:Start, 4:15:09 PM.
Execute Process Task
\Package\Execute Process Task
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Package:Start, 4:15:09 PM.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Package:Validation has started.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Package:Validation is complete.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
Package:Information: Succeeded in upgrading the package.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
run exe:Information: The Script Task "ST_6ba434db5c5649b7b68ab5fb14977781" has been migrated.
The package must be saved to retain migration changes.
run exe
\Package\run exe
OnWarning
8/22/2014 4:15:04 PM
run exe:Warning: Found SQL Server Integration Services 2012 Script Task "ST_6ba434db5c5649b7b68ab5fb14977781"
that requires migration!
run exe
\Package\run exe

MiniWAS not running error: Xuser not found

Hi I have installed succefully Miniwas in my PC, It work perfectly during couple of months, then suddenly I tried to start application and I could not, I got this error during start batch
C:\miniWAS> set DBBAME=WA1
C:\miniWAS> x_server
18641 Error:XSERVER is already running!
C:\miniWAS> dbmcli -U db_warm
Error! Xuser not found
Error: Database WA1 not started!

Hi Carlos,
when you or a script that starts the SAP System
starts the database with command "dbmcli -U db_warm"
the MaxDB/SAPDB uses a mechanism to look up so called xusers with entry name "default" to find a user with which the SAP system can connect to the database. this list is OS user dependent. Meaning that if you do a "c:>xuser list" on the command prompt for user OSUserA there are user maintained whereas when you are logged in with OSUserB and do the same thing there are no users maintained meaning you end up with an empty list displaying nothing.
So my first guess would be that you do not start the system with the user you have installed the miniSAP system because the list is only maintained for the user you did installed the system with.
If this is the case try to start the system with the OS
user you have used while installation of. If the current user is the installation user you have lost for some reason the xuser list entries. Then you have to rebuild this by hand with command
xuser -d <dbname> -n <dbhost> -u <Schema>,<Schema_Password>
-U DEFAULT -S SAPR3 -t 0 -l 0 set
of course therefore you have to know the user and password inside the Database to make SAP connect to it.
Another option would be to install the Database Manager Gui from http://www.sapdb.org/7.4/sap_db_software.htm do a backup of your database. Then throw away the complete system. do a reinstallation of the MiniSAP and then recover the database over the new installed one. This will reset you to have a running system with all the stuff you have done inside the system before
hope that is of help to you
Regards Ingo

Need help in URI scheme is not ¨file¨ error in uploading .PDF file

I am getting the URI scheme is not file error when I am uploadin a .PDF file
I am using the following piece of code
String lPathPrefix = "gopher://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);String lPathPrefix = "file://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";
String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);
Can anyone please help me in solving this problem
I will be very much greatful to you,
Thankx.

Did you get to resolve this error? We are also getting the same error and not able to figure out.
Edited by: Joe A on Nov 10, 2008 5:09 PM

My latest itune update wil not run, error message An

My latest itunes update will not run, erro message reads An application has made an attempt to load the C runtime library incorectly.

Hi,
In addition to what Lewis mentioned, please also take a try with the following suggestions:
Method 1.
Change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically". After that, click check for updates.
Method 2.
Update Windows Defender first:
1. Make sure time is sync. 2. Update Windows defender first, then click check for updates.
Method 3. rebuild the SoftwareDistribution folder:
Goto start > type services.msc
Scroll down to find Windows Update service
make sure Windows Update service is stopped, else right click and stop it
Go to C:\Windows\SoftwareDistribution\ and delete all files in it
Come back to services.msc and start Windows Update
service
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Qmasterd not running error message

I am running FCPS 2 Compressor 3.0.5 and I haven't rendered anything out for about a month. But now when I try to start up the Qmaster services it tells me that the qmasterd is not running and to consult my manual for information...I have read and tried a number of solutions and still can't get it up and running. The only thing that is making me wonder why it isn't working is that I have installed a trial of Avid and also of Premeire Pro. Could these have screwed up my Qmaster? If so what is the solution or where can I find the solution online....
Thanks,
Holly

I told myself: let's do it once again and this time ERASE ALL
In my last try, i had forgot to erase compressor.framework folder with all its contents.
Now, it is working just perfect, even the cluster between both computers
Best.R.
Sam

Help: Standalone applicatio​n does not run (Error #-10007), but developmen​t applicatio​n does

Similar Messages

Maybe you are looking for

Help: Standalone application does not run (Error #-10007), but development application does