MiniWAS not running error: Xuser not found

Hi I have installed succefully Miniwas in my PC, It work perfectly during couple of months, then suddenly I tried to start application and I could not, I got this error during start batch
C:\miniWAS> set DBBAME=WA1
C:\miniWAS> x_server
18641 Error:XSERVER is already running!
C:\miniWAS> dbmcli -U db_warm
Error! Xuser not found
Error: Database WA1 not started!

Hi Carlos,
when you or a script that starts the SAP System
starts the database with command "dbmcli -U db_warm"
the MaxDB/SAPDB uses a mechanism to look up so called xusers with entry name "default" to find a user with which the SAP system can connect to the database. this list is OS user dependent. Meaning that if you do a "c:>xuser list" on the command prompt for user OSUserA there are user maintained whereas when you are logged in with OSUserB and do the same thing there are no users maintained meaning you end up with an empty list displaying nothing.
So my first guess would be that you do not start the system with the user you have installed the miniSAP system because the list is only maintained for the user you did installed the system with.
If this is the case try to start the system with the OS
user you have used while installation of. If the current user is the installation user you have lost for some reason the xuser list entries. Then you have to rebuild this by hand with command
xuser -d <dbname> -n <dbhost> -u <Schema>,<Schema_Password>
-U DEFAULT -S SAPR3 -t 0 -l 0 set
of course therefore you have to know the user and password inside the Database to make SAP connect to it.
Another option would be to install the Database Manager Gui from http://www.sapdb.org/7.4/sap_db_software.htm do a backup of your database. Then throw away the complete system. do a reinstallation of the MiniSAP and then recover the database over the new installed one. This will reset you to have a running system with all the stuff you have done inside the system before
hope that is of help to you
Regards Ingo

Similar Messages

Shell Commands not found error when running application

Hello,
Im using MonoDevelop IDE in my Mac, before it used to work fine but after few days, now when I'm opening the application nothing happens., i checked the Console for the log and it says this
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 17: dirname: command not found
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 31: //mono-version-check: No such file or directory
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x52052].com.ximian.monodevelop[1510]): Exited with code: 1
I thought may be some error with the "dirname" command, so i commented it in the code and gave the path of directory myself and then the console shows up like this.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: grep: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 20: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 21: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 22: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 31: osascript: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: Cannot launch MonoDevelop
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: MonoDevelop requires the Mono Framework version 2.10.4 or later.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x56056].com.ximian.monodevelop[1532]): Exited with code: 1
I opened the contents of the application and run the shell script for opening aplication there it worked very fine and application started working.. But if i open application directly through launchpad or finder it doesnt show up and console
I tried running those commands in the terminal directly there they work.. But dunno whats wrong in here. and even if try to open the application through the terminal it all opens fine.. what could be the possible problem, is it with my mac..?

i finally figured out the problem.. it is with the environmental variables. the path for all those commands like "grep" is not being set for the GUI applications. that is why i got that error.
for those GUI applications which require path, we have to set path in the file /etc/launchd.conf the environmental variables set in here are used by the gui applications and those which are launched through spotlight.
that file may bot be present in most of the macs. No problem even if not present,we can create one and use.
so type in terminal
$ sudo vi /etc/launchd.conf
and in the editor add these lines
setenv PATH = /new/path
and save. Note: replace /new/path with the path which you need to have for the commands used in the script.
remeber that you need to restart your mac for applications to use these environmental variables.

Error 405: file not found displayed when trying to run a process on server

Iam trying to run a "weblogic integration-process application" on server to test the application.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>
     Tutorial_Process_Application_Web</display-name>
     <listener>
          <listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
     </listener>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
     <display-name>
     Tutorial_Process_Application_Ear</display-name>
     <module id="WebModule_1180909671484">
          <web>
               <web-uri>Tutorial_Process_Application_Web.war</web-uri>
               <context-root>Tutorial_Process_Application_Web</context-root>
          </web>
     </module>
     <module>
          <ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
     </module>
     <module>
          <ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
     </module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
-----------------------------------------------

sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu

"Error 404: file not found"displayed when trying to run a process on server

Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AM

sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu

Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes and then install iTunes again. Error 2. After this I

So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

File Not Found Error running JSP demos

I'm not sure what is going on, but it appears that every time I try to run a jsp, the server looks in the document root where it errors out with a file not found error. I've seen others with this type of problem but I haven't seen a solution. Anyone have any ideas?
Thanks.

1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change.

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

"file not found" error in VI Logger when running an imported VI Logger task

I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
Jake

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

File not found error on some computers running the same program

Dim pList As System.Diagnostics.Process
retval = 0
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
System.Disgnostics.Process.Start(PTRName)
pList = System.Diagnostics.Process.GetProcesses
For each proc As System.Diagnostice.Process in pList
If proc.ProcessName = "myprogram" Then
retval = proc.Id
Exit For
End If
Next
If retval > 0 then
'continue
Else
'error message
End If
End If
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
Retval = Shell(PTRName,4)
If Retval > 0 Then
'Continue
Else
'Error message
End If
End IF
I have created a program which:
opens a file
reads the records and massages the records
writes the records to a new file
Launches a program that uses the resultant file.
The program was written on Windows xp MCE using Visual Studio 10. The resulting program works fine.
I places The executable and the input file onto a flashdrive, and then tested it on other machines.
Two of the machines are both Win 7 Pro 64bit with .Net 4. On one machine it works great. On the other I get a "File not found" error when starting the second process. This is the failing code:
The problem is with the Shell command. When I rewrite it as:
it works on both machines
So my question is: Why does exactly the same code (The same flashdrive was used on both machines) work on one machine and not the other (when both machenes appear to be at the same level)?
In both cases I verify the file exists in the correct place before I try to start it.
Any help would be appreciated.
Thanks in advance
   John

The use of F is just an example. I use:
OutputPath = My.Application.Info.DirectoryPath 'Where app is run from (root)
    'Make sure the path ends in \
    If VB.Right(OutputPath, 1) <> "\" Then
      OutputPath = OutputPath & "\"
    End If
to get the correct information.
Then
PTRName = OutputPath & "myprogram.exe"
BTW "myprogram.exe" is not the correct name it is just an example.
Sorry if this caused confusion
However all of this is not the point. If:
My.Computer.FileSystem.FileExists(PTRName)
is true then the file is in the right place. Therefore:
Retval = Shell(PTRName,4)
must also work. However it does not on some machines.
Is the problem in .Net, VB or VS because it is not in my code.
I have also used a routine similar to you (in VB6) to find a particular volume, but used the volume label. That worked better in my case.
John

Error running exe to write to exel file: Error 7 New file not found

Hello!I have this problem, i've looked everywhere and i still can't solve it. It would be great if anyone can help me.
I built an application that writes an array to a spreadsheet file.
Everything works fine in Labview 7.1 , i can build the exe file, but
when i try to run it it doesn't work (it doesn't do anything although
in Labview works perfecty well)and i have this error:
<<Error 7 occurred at New File; Possible reason(s):
LabVIEW: File not found. The file might have been moved or
deleted, or the file path might be incorrectly formatted for the
operating system. For example, use \ as path separators on Windows, :
on Mac OS, and / on UNIX.>>
I've attached the vi file and the exe file.
Thank you
Attachments:
app.zip ‏167 KB

You've made a very, very common mistake and one discussed in numerous postings. When running in development mode and using the Current VI's Path, the path to a VI would be something like c:\folder\example.vi. When built, it becomes c:\folder\app.exe\example.vi. An extra strip path is required. Look at this, this, and this.

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

It says this when I try to open iTunes: Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 I've tried uninstalling it and installing it several t

It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FD

You have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer.

Office 2013 Click to Run - VAMT error: product SKU is not found

We failed to install the retail key for Office 2013 Home and Business Retail through VAMT. Error is: The Software Licensing Service reported that the product SKU is not found.
VAMT key install and activation worked fine with other retail products. I believe it's somehow related to the click-to-run technology.
Any help would be appreciated.

Hi,
I'm not quite sure how exactly you did in VAMT, but usually, the error message will show up only if you are using a wrong product key.
Do you have any other product keys installed in VAMT? Make sure you are using the correct key. Also, which activation option are you using in VAMT?
http://technet.microsoft.com/en-us/library/hh825164.aspx
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

MiniWAS not running error: Xuser not found

Similar Messages

Maybe you are looking for