HELP: Start up problem...

I went to start my MBP last night and couldn't get past an empty desktop and menu bar. I then started it in safe mode, ran disc utility, and did disc repairs. When I started it again, I got, and continue to get the grey apple screen, with the progress bar beneath it. The problem is: It never completes. It just shuts down in the middle of the startup. I couldn't find my Snow Leopard disc, (it's around here somewhere) so I tried to start it up from my leopard disc, but with no joy.
Are these symptoms familiar to anyone, and what is my next course of action?
Thanks in advance,
D.Gleason/Connecticut

If your Mac functions correctly in Safe Mode way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
-mj

Similar Messages

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Please elaborate. What do you mean by "start up problems" ? How far does it get?
Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

Help Needed for T42 Start-up Problem

Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!

wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!

My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.

You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support.

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Start up problems, including from installation disc.

Hello everyone in the Apple ether, I need your help!
I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
Kernel version:
Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
panic: We are hanging here...
After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
User Tips: Kernel Panics
==============
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
* If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
=============
How much HD space is left on the iMac?
How much RAM is installed?
==============
Which "model" & "generation" G5 iMac does your mother have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Photo Gallery start up problem

I have a glitch and it's probably me … but here's what
I know.
About Don Booth's Photo Gallery:
It's great. Everything is good - integrated with my CSS -
looks nice.
When the page loads all is well except the first image in the
Gallery does not display in <div id="mainImageOutline"... (and
the first thumbnail is not highlighted). While I'm building and
testing this is OK. Just click a thumbnail and everything works
well.
In the demo, the Gallery is operational by default and starts
up with the first thumbnail and Spry:detail produces the
corresponding image (automatically). That's what I want.
About my code:
Except for a couple of "page layout" divs that I have,
consistent with my own site-wide style sheet conventions, such as
<div id="wrapper"> and <div id="maincontent"> I have:
1. Copied Don Booth's xhtml code directly from the
Spry_1_1_022408 download sample.
2. Copied Don Booth's css code directly from the same
download sample.
3. Copied Don Booth's gallery.js directly (without change as
far as I know).
The only significant change (apart from CSS and xhtml
structure) in my work is - I added an additional Spry:detail div to
present additional datapoints from xml. This is not relevant to my
question because the issue that concerns me is consistent if I
remove this second detail div. The start-up problem remains.
The URL for the gallery page in question is:
http://www.yhqg.org/Celebration/quiltshow2008/galleryix/gallery.htm
I imagine the problem is in gallery.js. You should know that
javascript is a bit like dungeons and dragons to me.
I have an error report:
Error: dsPhotos is not defined
Source File:
http://www.yhqg.org/Celebration/quiltshow2008/galleryix/includes/gallery.js
Line: 55
So, when I see:
var gAutoStartSlideShow;
if (gAutoStartSlideShow == undefined)
gAutoStartSlideShow = true;
I imagine I'm looking at something useful but I don't know
what to do with it, or if it is the right code to focus on. I
respect the relationship with level 4 support engineers, but after
trying to solve my own issue for a few weeks I decided it was time
to submit my question. How do I get Photo Gallery to start up like
the demo?
Additional information:
There is also a series of error reports that show when the
Gallery is playing (for example):
Warning: Expected end of value for property but found
'-0.0775'. Error in parsing value for property 'opacity'.
Declaration dropped.
Source File:
http://www.yhqg.org/Celebration/quiltshow2008/galleryix/gallery.htm
Line: 0
I don't think it is related, but that's what I know.
I tried to copy my xhtml (below) but it caused this message
to exceed allowed size. But I don't see that xhtml is the problem.
You can see the source at the URL (above).

Hi Latauro,
Sounds like you need to turn your Slideshow into a Track, and then set the Track to display as 16:9 Letterbox; but first, you'll also need to encode your slides as wide Mpeg 2 clips (encode set to 16:9), too; to whatever duration you have them set in the Slideshow, currently (if they're not already wide encoded clips).
It would be good to stick some same duration audible or silent same format and bit rate audio underneath each of the new movie slides, to present players a nicely packed VOB.
Take care,
Trai Forrester
TFDVD Research Labs
http://www.DVDVerification.com
PS. If this helps you, would you please remember to declare the thread as "Solved". Although probably hopeless, someone should make a run to try and catch up with good Drew!! (see what happens Hal, when you take some time off?!

Start-up problem with the Z10

Can you assist us in a Start-up problem with the Z10's.
I have read a lot of complains with the Z10 starting-up and then got stuck at 98% completion. No further response after that!
For any further information please check the "BlackBerry Support Forum" on this same site.
Please respond or tel me who i can contact in this regard?
Thank you
Kobus69
Subject Title and beginning of post edited to reflect new topic.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Help with systemd problems/reply to closed thread

@Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
@czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
@tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
Ah, I see, then I misunderstood the current state of the install media
"Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
@Everyone; Awebb possesses stunning accuracy as far as his observations go.
@zb3; My point exactly.
@tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
@Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
Now then, to the main problem; first, I tried running
"systemctl enable syslog-ng.service"
and got the following message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
"systemctl enable dbus.service",
to which I got the reply
"The unit files have no [Install] section. They are not meant to be enabled using systemctl."
This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.

tcmdvm wrote:
The message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
indicates that running "systemctl enable syslog.service" is now enabled.
If you try running sytemtctl enable <whatever>.service and get
"The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
Oh ok, then I should dare more on.
ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such. Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'? I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
(edit/addon)
Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
Edited for additional question.
Last edited by incassum (2012-11-07 08:44:42)

Help! Airport problems

Hi all!
this weekend my AirPort started having problems. The AirPort icon suddenly showed that the AirPort status was off and, obviously, internet connectivity went down. Following is a list of troubleshooting steps I already took but without any success:
went to Network Settings and hit the button 'Turn AirPort On' -> nothing happens.
restarted Mac -> working fine initially but issue was back after a while
hard-reset of the TimeCapsule -> problems persisted
downgrade of the firmware of the TC from 7.4.2 to 7.3.2 -> problems persisted
powered-on a PC laptop -> no problems with the PC, wireless always available.
connected through a Linksys wireless router -> same issue
reset of the MAC's PRAM and NVRAM -> issue persists
I have no idea what else to try. Any suggestions are very welcomed!
I've been doing all software upgrades and, recently, there was a major one. However, no upgrades were performed this weekend and no issues were found right after the last upgrade...
My warranty expires on the 19th July so if I have to replace the Airport I would like to do it before then...=)
Can you please help me?
Thanks in advance
Eduardo

Before you take it in quickly boot into Safe Mode and then boot back into your regular account to see if that helps. If it doesn't take the Mac quickly to an Apple repair center before the warranty goes out.

Shut down // start up problems

i am having power related problems on the intel mini and i want to know how widespread this is before i confront apple support. btw i love the mini--this is my 2nd mini. i have had a power on problem with a mini even on the day of purchase and it was exchanged graciously at the apple store in white plains this past july.<this was a power button failure issue>
here's whats happenning....1>it misbehaves on shut down or restart by software. there gets to a point where the screen is black but the white light on the box stays on and the vents in the back are still warm. my workaround is to manually shut down about a minute after the software shut down by holding down the power button on the back of the mini.
......2> start up problem. the mini wont always start when i push the power button. my workaround has been to turn off my surge protector for about 10 seconds then turn it back on and VIOLA the power button can start the mini. i guess it needs to be cold to work.
i have been reticent to go to the store because i rely on this machine too much and i am not the only user here.
can some reader disclose if such a hardware failure is known?
thanks in advance.

thanks. i hadn't thought about the surge protector.
keyboard and mouse are bluetooth.monitor is digital 24". i have an external powered usb hub which runs my time machine external drive. i keep everything else unplugged from the usb hub during startup and shutdown because my ipod shuffle caused startup problems in the past.
i had similar troubles with my first mini when it was plugged directly into a wall socket. the surge protector seems to help--at least i can cold start the mini without unplugging it.
i have a genius bar apptmt this evening and i will see what gives. i am glad i made apple put in their own overpriced ram so i never voided the warranty. maybe i will buy a care plan to cover myself when i am there. but i so want to raise this mini from 2 to 4 gig now that mem is so cheap. if i can get this problem stabilized...
my very first mini was powerpc and the ipod shuffle, according to genius bar, caused its demise due to usb 1.1 and usb2.0 handshaking problems. i still have it somewhere and plan to install a harddrive to get it going.
thanks again guys.
and i'd like to ask others again if this problem is more common.

New MB Pro; start-up problems (again)

In case you remember me, yes I am the same person who recently bought a MB Air and had lots of problems off the bat (some of which required repair by Apple). It is working fine now, but it was just not working out for my needs. So, I decided to suck it up, switch to the Pro and sell that Air.
Now the PRO is giving me start-up problems. Gah! I made a fresh Time Machine back-up from the Air...then used Time Machine upon initial set-up to transfer everything to my Pro (thinking I was wiser this time, doing it upon initial set-up). But...no go. First my Pro would not recognize my admin password and I had to reset that. Now that I'm into my system, iPhoto will not open (I get a window vaguely stating there is some problem that it then reports to Apple); Calendar and Notes just show big question marks in the dock.
I opened a new user account to see what would happen: in that account, Notes and calendar seem just fine, but iPhoto still will not open.
Furthermore, in my support research I keep coming across stuff that talks about the install disk....But never saw one! Am I supposed to have one, or are the new Pros like the Air (in having online reboot sytem)? I did not see any disks in my box (which of course is currently not where I can access it to double check). The only place the disk could have been is underneath the frame inside the box, but there is usually nothing under there, so I don't think I had one. Could this be right?
Other possibly useful (?) info: I bought the Pro w an 8GB RAM upgrade, which was installed right in store. When I opened a new user account I got a window talking about "automatic login" and how the computer would start to an account that was named after the store where I bought the computer if i did not turn it off. I did turn it off but I would like to get rid of this "store account"...but is not listed as a User acct so I don't know how to find it in order to get rid of it.
Help?!

Thanks for the input. I totally agree that I'd like to take this one back and exchange for a new one. Only problem is that I am traveling for work internationally until after the 14-day deadline. It's quite a hassle to get back to the US in time, though I have it in my back pocket to push for an extention to that time period...
Meanwhile, I had my 3rd Apple Support chat today. They finally gave me a dedicated Sr. Advisor who managed to get the Lion erase and install to take this time. (I didn't pay for the Mountain Lion upgrade; one thing having gone right!) I have to get green-lighted for another free Mountian Lion upgrade but at least we're on track at this point. Fingers crossed it continues that way!
At the rate they're going with me this summer, I should think a discounted AppleCare is in order or SOMETHING. Gah!
For any future problem-having readers, I'm afriad they did not seem to understand/answer why this was happening, so I've no wisdom to impart!
For the responders: Thanks again!

Satellite Pro M10 - start up problems

Hi
I have a Satellite Pro M10, only 2 years old, but has big start up problems at mement.
The message that comes up when turning it on is:
"Intel (R) Boot Agent FE v4.1.09
Copyright (C) 1997-2002, Intel Corporation
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting Intel Boot Agent.
Insert system disk in drive.
press any key when ready......"
Now I have spoken to a few people and they all say I need a new hard disk etc..., but I can't see how you replace this as it looks like it is built in rather than something than can just be pulled out.
Also I don't have a system disk, and the guy that supplied it to me has decided not to return my emails?
Can anyone help please?
Chris

Hi,
Your original error messages indicate that your laptop is unable to boot from the hard drive, so the BIOS search order will then force a boot from the CD drive. This is why it is asking fro a disc to be inserted.
Since you cannot boot into safe mode then I must presume that your hard drive is corrupt in some way, so the next option is to restore the hard drive from your recovery CDs. Note that this will reformat you hard drive and you will lose any data on there which has not been backed up.
To use the recovery CDs simply insert the first CD into the CD drive and power attempt to reboot the laptop while holding down the 'C' key on the keyboard. (This may be different for your CDs but it is the "C" key on mine).
Then just follow the on-screen prompts to start restoring your hard drive.
With regard to your question about the 'system disk', this can be any bootable CD that you may have. Some can be supplied by third party products (such as Norton Ghost) or may be created yourself for subsequent use. Your product recovery CDs are also bootable so you may be able to user the first of them at this prompt.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

HELP: Start up problem...

Similar Messages

Maybe you are looking for