Help! Urgent !- Mapping error - XML file format ?

Hello,
I can't load this xml file (by http adapter):
<?xml version="1.0" encoding="UTF-8"?>
<ZVG_GetOrderList_requ>
<Orders>
    <Order MessageType="GETORDERLIST" DecimalSeparator="POINT" Currency="EUR">
        <CustomerCode type="AG">0330029839</CustomerCode>
        <Plant>1141</Plant>
        <SalesOrganisation>1141</SalesOrganisation>
        <DocType>1</DocType>
        <DistributionChannel>01</DistributionChannel>
        <Division>99</Division>
        <BeginDate>20040926</BeginDate>
        <EndDate>20041026</EndDate>
        <TransactionGroup>0</TransactionGroup>
        <CustomerOrderNumber />
        <ERPOrderNumber />
    </Order>
</Orders>
</ZVG_GetOrderList_requ>
is there any problem in this file ?
The message mapping seem to be correct
do we have to add some tags in the file ?
Thanks for your help
Message was edited by: Fabrice Petetin
Message was edited by: Fabrice Petetin

I obtain the following error message :
<?xml version="1.0" encoding="iso-8859-1" ?>
- <Top>
<First>BeginTrace</First>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="1" type="T">Interface Mapping http://ZVGEPOWER_TRANSACTIONS ZVG_GetOrderList</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping A6AE36BEA38F36198AF80ECE75E2F905</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 1AADFDF03E2611D9CF65DA19C0A82AA1</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_ZVG_GetOrderList_request_</Trace>
<Trace level="2" type="T">Mode 3</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_ZVG_GetOrderList_request_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._ZVG_GetOrderList_request_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [ns0:BAPI_SALESORDER_GETLIST]</Trace>
<Trace level="3" type="T">Add raw attribute [ xmlns:ns0="urn:sap-com:document:sap:rfc:functions"]</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_ZVG_GetOrderList_request_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:BAPI_SALESORDER_GETLIST/CUSTOMER_NUMBER. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:296) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:68) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:236) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor468.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy22.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_ZVG_GetOrderList_request_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:BAPI_SALESORDER_GETLIST/CUSTOMER_NUMBER. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_ZVG_GetOrderList_request_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:BAPI_SALESORDER_GETLIST/CUSTOMER_NUMBER. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor468.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy22.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:BAPI_SALESORDER_GETLIST/CUSTOMER_NUMBER. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:296) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:68) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:236) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor468.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy22.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Top>

Similar Messages

ABAP to XML file - Formatting problem and UTF-8 requirement

Hi Everyone,
Could you please guide us on the ABAP coding required to get the proper XML file format. We have prepared the code for downloading SAP transaction data into an XML file format. However, we are stuck with an improper format as per Example 1.
The file format we get is this:
Example 1:
<?xml version="1.0"?><FDXLMDOrd><FXNHdrLp><CrtDtTm>20070613094517</CrtDtTm><MsgID>319304155</MsgID><MsgTyp>850</MsgTyp><MsgSubTyp>SALES_A</MsgSubTyp><Pr
<RcvTP>FSCS</RcvTP><SndSrc>FXN</SndSrc><RcvSrc>EIB</RcvSrc><UsrID>VAR</UsrID></FXNHdrLp><OrdHdrLp><OrdNbr>319304155</OrdNbr><OrdActnCD>9</OrdActnCD><Ord
teCarrReq>FDE</RteCarrReq><RteTptSvcReq>FEIP</RteTptSvcReq></DprtRteLp><SpecInstrLp><SpecInstrTyp>SHIP</SpecInstrTyp><SpecInstr>Example Packing Instruct
les Order</RefDesc></RefLp><RefLp><RefIDQual>CPO</RefIDQual><RefID>test 1 line 1 pc - s</RefID><RefDesc>Customers Customer Purchase Order</RefDesc></Ref
Typ><EntIDQual>91</EntIDQual><EntID>H00092</EntID><EntNm>VLAD BOBES</EntNm><Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA
></AdrLnLp><ConLp><ConTypCD>IC</ConTypCD><ConNm>VLAD BOBES</ConNm><CommLp><CommNbrQual>TE</CommNbrQual><CommNbr>514-731-8361</CommNbr></CommLp></ConLp><
<Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA</CtryISOCD><AddlNmLp><AddlNm1>VLAD BOBES</AddlNm1></AddlNmLp><AdrLnLp><Str
However, the format need to look like this as in Example 2 below.
We also need help in how to get " encoding="UTF-8"?> " as part of the file format.
Example 2:
<?xml version="1.0" encoding="UTF-8"?>
<FDXLMDProdRcpt>
    <FXNHdrLp>
        <CrtDtTm>20070612151817</CrtDtTm>
        <SessID>26796</SessID>
        <MsgTyp>861</MsgTyp>
        <MsgSubTyp>WRE_A</MsgSubTyp>
        <PrcsingPrty>5</PrcsingPrty>
        <SndTPQualCD>ZZ</SndTPQualCD>
        <SndTP>FSCS</SndTP>
        <RcvTPQualCD>ZZ</RcvTPQualCD>
        <RcvTP>EIB</RcvTP>
        <SndSrc>YANTRA</SndSrc>
        <RcvSrc>EIB</RcvSrc>
        <UsrID>VAR</UsrID>
    </FXNHdrLp>
    <ProdRcptHdrLp>
        <ShpID>VAR20070612NCHIC1</ShpID>
        <ShpTyp> </ShpTyp>
        <ShpActnCD>00</ShpActnCD>
        <InTransMrgTyp> </InTransMrgTyp>
        <ShpVolUOM>CI</ShpVolUOM>
        <ShpWgtUOM>LB</ShpWgtUOM>
        <ShpTotVol>310022.00</ShpTotVol>
        <ShpTotWgt>861.00</ShpTotWgt>
        <DtTmLp>
            <DtTyp>050</DtTyp>
            <DtTmQual>501</DtTmQual>
            <DtTm>2007-06-12T15:07:41-04:00</DtTm>
        </DtTmLp>
        <AdrLp>
            <EntTyp>RC</EntTyp>
            <EntIDQual>93</EntIDQual>
            <EntID>NCHIC</EntID>
            <EntNm>NCHIC</EntNm>
            <AutoCrtTrdPar>0</AutoCrtTrdPar>
            <AutoCrtTrdParRole>0</AutoCrtTrdParRole>
            <AutoUpdtTrdPar>0</AutoUpdtTrdPar>
        </AdrLp>
        <ProdRcptTptLp>
            <TptIDQual>BOL</TptIDQual>
            <TptSCAC> </TptSCAC>
            <TptID> </TptID>
Thanks and Best Regards
Sitaraman

You could try to use the following coding:
*& Report ZUS_SDN_UC_XML_TO_UTF8_TRANSF
REPORT zus_sdn_uc_xml_to_utf8_transf.
define local data
CONSTANTS:
gc_encoding           TYPE string VALUE 'UTF-8'.
DATA:
gd_result             type string,
go_ixml               TYPE REF TO if_ixml,
go_stream_factory     TYPE REF TO if_ixml_stream_factory,
go_encoding           TYPE REF TO if_ixml_encoding,
go_resstream          TYPE REF TO if_ixml_ostream.
DATA:
gt_knb1    TYPE STANDARD TABLE OF knb1,
gd_xml     TYPE string,
gt_xml     TYPE TABLE OF string.
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1 UP TO 10 ROWS
      WHERE bukrs = '1000'.
go_ixml = cl_ixml=>create( ).
go_stream_factory = go_ixml->create_stream_factory( ).
go_encoding = go_ixml->create_encoding( character_set = gc_encoding
                                        byte_order = 0 ).
go_resstream =
              go_stream_factory->create_ostream_cstring( gd_result ).
CALL METHOD go_resstream->set_encoding
    EXPORTING
      encoding = go_encoding.
XML Transformieren
CALL TRANSFORMATION id_indent
    SOURCE     itab = gt_knb1
    RESULT XML go_resstream.
APPEND gd_result TO gt_xml.
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
     BIN_FILESIZE              =
      filename                  = 'C:\temp\xml_to_utf8.txt'
     FILETYPE                  = 'ASC'
     APPEND                    = SPACE
     WRITE_FIELD_SEPARATOR     = SPACE
     HEADER                    = '00'
     TRUNC_TRAILING_BLANKS     = SPACE
     WRITE_LF                  = 'X'
     COL_SELECT                = SPACE
     COL_SELECT_MASK           = SPACE
     DAT_MODE                  = SPACE
     CONFIRM_OVERWRITE         = SPACE
     NO_AUTH_CHECK             = SPACE
     CODEPAGE                  = SPACE
     IGNORE_CERR               = ABAP_TRUE
     REPLACEMENT               = '#'
     WRITE_BOM                 = SPACE
     TRUNC_TRAILING_BLANKS_EOL = 'X'
   IMPORTING
     FILELENGTH                =
    CHANGING
      data_tab                  = gt_xml
    EXCEPTIONS
      file_write_error          = 1
      no_batch                  = 2
      gui_refuse_filetransfer   = 3
      invalid_type              = 4
      no_authority              = 5
      unknown_error             = 6
      header_not_allowed        = 7
      separator_not_allowed     = 8
      filesize_not_allowed      = 9
      header_too_long           = 10
      dp_error_create           = 11
      dp_error_send             = 12
      dp_error_write            = 13
      unknown_dp_error          = 14
      access_denied             = 15
      dp_out_of_memory          = 16
      disk_full                 = 17
      dp_timeout                = 18
      file_not_found            = 19
      dataprovider_exception    = 20
      control_flush_error       = 21
      not_supported_by_gui      = 22
      error_no_gui              = 23
      OTHERS                    = 24.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
However, I like to mention that the file created from out ECC 5.0 (6.40, non-Unicode) contains a special character between the XML header and the data part (when displayed using NotePad Editor):
...xml version="1.0" encoding="utf-8"?>[special character]<asx:abap xmlns:asx="http://www.sap.com/a...
Using a HexEditor the special character (0x0A) is displayed as a dot.
Also Check with FM - TREX_TEXT_TO_UTF8
Reward Points if it is helpful
Thanks
Seshu

What does the Error Message: "File format not supported" mean?

When I first open an existing project, I get an Error Message: "File format not supported". After a few seconds all the windows open up and I can continue to edit. My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up? All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate, 1920 x 1080.

More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
Also, are your files on an external drive?

Convert the Database records to a standard XML file format?

Hai,
i want to convert the Database records to a standard XML file
format which includes the schema name, table name, field name
and field value. i am using Oracle 8.1.7. Is there any option
please help me
Thanks in advance.

You could put the files somewhere and I can export them as QuickTime. Or you could find anyone you know who has Director. Or do the 30 day trial download
Another approach would be to play the DCR in a browser window, and do a screen recording. But that’s unlikely to give the perfect frame rate that you would get by exporting from Director.

I have iphoto 6 and my pictures are no longer showing. I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

I have iphoto 6 and my pictures are no longer showing. I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

How did you rebuild?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

I'm trying to open a word file on my iMac and it keeps saying Import error: the file format is invalid. Why?

I exported a file on my imac as a word document but now I can't open it. It says Import error: The file format is invalid.

If no on this forum can help you then I would recommend reposting on the Office for Mac Product Forums.

How to read XML file format

Presently calling a webservice to search for customer which generates a XML file. Requirement is to check the XML file format in case of success move to next step and in case of error exit from the application.
The file generated can have multiple formats as per input supplied.
Please advise how the file format can be checked.
Thanks
anya

hi anya,
Try to use FM IDOC_XML_FROM_FILE.
or check the below code
data: temp_str type string.
concatenate '>' cl_abap_char_utilities=>cr_lf '<'><' in XML_STRING with temp_str.
xml_string is the straing variable to hold the xml .
now use xml_string to show it in texteditor.
-Thanks
Saurabh Goel

How to export table contents in xml file format through SQL queries

hi,
i need to export the table data in to xml file format. i got it through the GUI what they given.
i'm using Oracle 10g XE.
but i need to send the table name from Java programs. so, how to call the export commands from programming languages through. is there any sql commands to export the table contents in xml format.
and one more problem is i created each transaction in two tables. for example if we have a transaction 'sales' , that will be saved in db as
sales1 table and sales2 table. here i maintained and ID field in sales1 as PK. and id as FK in sales2.
i get the combined data with this query,
select * from sales1 s1, sales2 s2 where s1.id=s2.id order by s1.id;
it given all the records, but i'm getting two ID fields (one from each table). how to avoid this. here i dont know how many fields will be there in each table. that will be known at runtime only.
the static information is sales1 have one ID field with PK and sales2 will have one ID filed with FK.
i need ur valuable suggestions.
regards
pavan.

You can use DBMS_XMLGEN.getXML('your Query') for generating data in tables to XML format and you can use DBMS_XMLGEN.SETROWSETTAG to change the parent element name other wise it will give rowset as well as DBMS_XMLGEN.SETROWTAG for row name.
Check this otherwise XMLELEMENT and XMLFOREST function are also there to convert data in XML format.

Mapping flat xml file to xml Structure

Hi all,
i have to map an xml file, wich is incoming via a RFC call in a flat import field, to a xml-Structure. The xml Structure has the same Structure except that it is not flat but even as a xml-Structure in the Repository. Ist ther a way to make a 1:1 - Mapping?
Regards Mathias

Hi,
This can be done very easily using Java Mapping.
Parse the flat xml String using Dom4j and directly set this as the target structure.
eg code:
public void execute(InputStream in, OutputStream out) throws StreamTransformationException{
String flatXml = "the flat xml string";
Document doc = DocumentHelper.parseText(flatXml) ;
out.write(doc.asXML().getBytes());
Regards,
P.Venkat

IWork export to Office error "The file format is invalid" in pages, keynote and numbers.

I am running iWork 09 (latest versions in all cases)*. When I try to export files from all three of the applications Pages, Keynote and Numbers into the relevant Office formats, I get the error "The file format is invalid." It works fine with PDF or RTF export.
I am able to open the same files in the iPad versions of thess iWork apps, and then export them. While this workaround will do for now, I'd like to be able to just export correctly.
Anyone have any suggestions on what might be wrong?
Thanks,
Iarla
* on a MacBook Pro '07, running Lion 10.7.1.

Yes, this worked a treat, thanks very much! *
Iarla
* Note that I needed to manually remove iWorks as the For_iWork:iWork '09:iWork9Update5.dmg.zip file wouldn't work on the latest version of iWorks. This involved deleting the iWork folders in the Applications and Library directories.

Patching error: Missing file format id in file...

Hi:
I am pathing #14351767 and got the following error: We have 12.1.3 on linux. db 11.1.0.7. I download generic for America. Did what note ID 1300257.1 suggested - didn't work. After error out, I can't type anything on the server, have to close it and reopen another one.
=======
AutoPatch error:
Missing file format id in file:
/Application/orclapps/apps_st/appl/admin/applcust.txt
This version of AutoPatch requires a file format id
on the first line of the file.
Error reading customized files file
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
=======

870765 wrote:
Can I tried to apply the patch without the file (as said in the step #2) because I don't know how to check "meticulous documentation was kept"? I have log a SR but no one is repllying to me. And most of time I get answer from here first. I have to finish this task by today. THXYes you can.
Oracle E-Business Suite Patching FAQ for Release 12 [ID 459156.1] -- How can I track my customizations? What happens to my customizations during patching?
Thanks,
Hussein

SAP Download to Excel2007 .Error occurs: file format is not valid

We met a problem when use BAPI EXCEL_OLE_STANDAED_DAT to generate local Microsoft excel 2007 file.
When open the generated excel 2007 file, Error occurs: file format is not valid. We do not know how to solve this trouble

what kind of data are you going for so that you have to use this specific FM?
i mean try using other FMs if its simple data...
one more thing is check what data is being downloaded, keeping a breakpoint just before downloading.

BODI XML File Format - Runtime error

Hi Friends:
I am able to import xsd file in the designer and validate the job. However when I run the job, I get the following runtime error:
XML-240308 XML parser failed: Error: <An exception occurred! Type:RuntimeException, Message:The primary document entity could not be
opened. Id=D:\DI Install\Business Objects\Data Integrator 11.7\bin///usohcol1nas9k01/Etl/SkipRobot/DataFiles/ XML_Data/XMLFiles/CCD_14817356337494.man> at line <0>, char <0> in file <>.
|Dataflow New_DataFlow4|Reader READ MESSAGE xml_test2 OUTPUT(xml_test2)
XML parser failed: See previously displayed error message.
Please note that I am using vnc path for the XML files. However, If I use a directory local to the job server, the job runs fine.
Can any one tell me what the issue is?
Thanks
Raj

Hi Raj,
That's funny that you are using 11.7.2.2 -- this problem was reported in bug ADAPT00777107 which was reported in 11.7.0.x. 11.7.2.2 contained a fix for this issue. It is also resolved in version 11.7.3.x and 12.x. (In the "doc" directory of the 11.7.2.2 installer, you will find a PDF called FixPack_ReleaseNotes which mentions that ADAPT00777107 was resolved.)
Maybe your jobserver is version 11.7.0.x and your Designer is version 11.7.2.2? Let me know.
Thanks,
~Scott

Mapping error for file scenario.

Hi ,
I am working with the help of this scenario to pick only selected files.
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I am getting error in mapping . Everything i have checked its correct . Mapping is correct . but still its giving error . how can i solve it .
Error : RuntimeException in Message-Mapping transformatio~
Thanks ,
Syed.

Dear Syed Kumar
Based on the blog you are executing the scenario I guess. The scenario is clearly focusing on the picking up the files using the mask attribute in File Access Parameters.
As you mentioned clearly, that you are getting mapping error plz concentrate on how to rectify the mapping errors.
will guide to do so.
1. Go to SXMB_MONI and in the integration server and check for the message you are trying send.( I hope you did this)
2. As it is giving you mapping error, Double click onthe message Flag showing red.
3.Plz check the Payload XML content copy that content and paste in the message mapping Test section of IR.
4. Execute the Test. If you get the message at the receiver side there shouldn't be any error.
If you still get the error let me know.
Best of Luck
Reward Points If found use ful.
Edited by: Praveen Kurni on Jun 13, 2008 7:43 AM
Do the Interface mapping test as well if you are successful in message mapping.

Mapping error in file(FCC) to rfc scenario

Hi,
i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
Source Structure                           Target Structure: RFC
storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
     recordset                                      it_transaction
       gmd_site_101                                 item
      gmd_site_102
      gmd_site_103
      gmd_site_104
here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
any help would be very helpful..thanks in advance.
warm regards,
kartz

hi
You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
It would be better if you paste the error you are getting over there.
Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
Also check in FCC parameters you must have used ignoreRecordsetName = true
Regards
Raj

Help! Urgent !- Mapping error - XML file format ?

Similar Messages

Maybe you are looking for