Help: URL encoded in Base64 not working with SP4
With SP1, there was no problem but after installing SP4 (don't know whether it is accidental), this problem started occurring and I don't know what caused it. Here is the description:
I have SP4 running on Solaris 8. An applet is launched and sends a servlet request to the server where the URL is encoded in Base64 (Post method) for some additional data. The servlet receives the request and attempts to decode the received URL since the parameters contain relevant info. While trying to decode the base64 parameter string back into Unicode, I see an exception:
[23/Oct/2002:14:59:54] failure ( 6684): Internal error: exception thrown from the servlet service function (uri=/reports1/savereport): java.io.EOFException, Stack: java.io.EOFException
at java.io.DataInputStream.readFully (DataInputStream.java:158)
at java.io.DataInputStream.readUTF(DataInputStream.java:526)
at java.io.DataInputStream.readUTF(DataInputStream.java:496)
at com.xxxxxx.utils.Base64.decodeUnicodeString(Base64.java:236)
My assumption is that the byte ordering may have been altered to cause this failure, but the Solaris OS version and the client machine's configuration did not change. Nothing else changed except the iPlanet version, which used to work otherwise.
Has anyone seen this or does anyone know how to correct it? Will appreciate your response! Thanks in advance.
hrstewart74 - You'll also need to send a Follow request to lindseyt_vzw that they'll have to approve. Once you both are Following each other, then you can send them a Direct Message.
How To: Direct Message
Similar Messages
-
Please help... jam packs not working with logic express 8
my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox -
Help! My Script is not working with Flash 8
Hallo,
I really hope someone around here can help me, cause I am
becomming mad. I tried everything searched the whole net, but I
found nothing.
I want to integreat a script to my website, which lets the
mouse burn. But unfortunetly it doesn't work. Whenever I export my
movie, a message comes up, which says that my computer might become
unresponsable when I continue to run this script. Do you want to
continue yes or no when you klick yes it simply doesn't work.
HEEELLPPP!!
Acctually the script does't look so difficult. Who knows what
I need to change.
I have the script from a great flash rescource site on the
net. When you google flaming cursor and you take the first hit you
can download the .fla file.
Here's the script:
_quality="low";
//__ try adjusting these values for different effects.. __\\
//__ NOTE: some changed values may not have effect,
//... other values may need to be adjusted for effect to be
seen__\\
//__ Density (MIN=1 / MAX= *about 20 each)_______\\
/:Smoke_amount=12;
/:Fire_amount=8;
// ____ Y off-set ________\\
/:Smoke_Y_offset=-12;
/:Fire_Y_offset=3;
//__ X fluctuation amplitude _____\\
/:Smoke_X_amp=12;
/:Fire_X_amp=5;
//__ Speed of rise .......
//__ 0 = Stationary
//__ Negative value = descend
/:Smoke_riseSpd=.18;
/:Fire_riseSpd=5;
//__ rate of dissipation _______\\
/:Smoke_fade_rate=1;
/:Fire_fade_rate=18;
//__ point in which fire restarts at Ymouse coord__\\
/:Fire_resart=32;
//__ Rate of growth ..
//__ (0 = No Growth) (Negative Value = Shrink)
/:Smoke_grth_rate=3;
/:Fire_grth_Xrate=-4;
/:Fire_grth_Yrate=-4;
//__ rotation rates & amplitudes _______\\
/:Smoke_rotationRate=2.3;
/:Fire_rotationAmp=4;
//__ Max fire angle when mouse moves X __\\
/:FireAngle_max=60;
//____ Min & Max sizes ___\\
/:Smoke_size_min=26;
/:Smoke_size_max=112;
/:Fire_size_min=5;
/:Fire_size_max=100;
stop();Hello, I just updated to 10.8.3 and it´s running fine now. I´m running a late 2009 MacBookPro with an unencrypted 128 GB OCZ Vertex 2 SSD and have a encrypted 1 TB WD Scorpio Blue for Data using the Optibay tray after removing the Superdrive and had a weird Problem
https://discussions.apple.com/message/21543753#21543753 -
Help--JRE 5.0 Plugin not working with IE6
I'm trying to set up the Sun JRE plugin on my XP machine, and Internet Explorer will not use it. I have IE checked in the Sun Java Console, and Java (Sun) is checked in Internet Options. MS VM console is turned off. It doesn't seem to matter whether the VM jit compiler is on or not, it doesn't work either way.
If I use any java tester, it says my browser is using 1.1.4 from Microsoft. If I try to bring up the Sun Java Console from IE, it says that I need to set Sun Java as my default java interpreter though Internet Options/Advanced. As I said, I've already done that.
The Java SDK 5.0 appletviewer works just fine. Does anyone have any idea why MSIE is not using the Sun JRE plugin?I seem to have fixed this one, although I'm not quite sure what happened. I continued struggling with it yesterday. I uninstalled JDK 5.0 and reinstalled a few times, both on and offline methods. Then I tried to install 1.4.0. Nothing seemed to help, so I tried just installing the 5.0 JRE (not JDK). Even that didn't work. I still couldn't get the console to come up in IE6, and clicking on the option said that I needed to make Sun Java the default java on the system, which I had already done.
I finally gave up and installed Firefox on the machine. and I got the 1.5 JRE set up on Firefox. Then, when I went back to IE, all of a sudden it worked. I still can't call the console from IE (says not default), but I can get it from the java icon in the system tray (the icon didn't even show up there before I installed Firefox). IE now says it's using Java 1.5 from Sun when I go to javatester.org, and it will read my compiled 1.5 applets.
Needless to say, I'm still scratching my head on this one--maybe Internet Explorer has a "Me too" subroutine that kicks in and fixes things when another browser is installed. In any case, Firefox can now claim to be a Sun Java panacea--at least to me. -
None of the video ripping add ons work anymore with the current version of Mozilla, neither do Download Helper nor RealPlayer, why?
== After the latest automatic browser update just today.RealPlayer>tools>preferences>download&recording>Firefox3.6
-
my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in
If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.
-
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Apple 23 Cinema not working with nvidia 5200...help!!!
Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit -
Why does my webcam not work with Skype - can anyone help?
Why does my webcam on Mac Book air not work with Skype - can anyone help?
Did you set the Skype Audio/Video preferences to use the camera?
-
downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
-
I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks
I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise. -
Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,
Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.
Maybe you are looking for
-
I cannot open project; do I start all over, or is there hope?
So I have started doing video podcasts and am using iMovie '11 for editing the footage. I exported my first episode which turned out to be around 18 min total. When I watched it to verify, the audio started becoming out of sync with the video. It got
-
I cannot update my itunes account. when I try to edit information I am getting an error message
cannot update my itunes account. when I try to edit information I am getting an error message
-
Using previous music libraries
This is related to another thread I posted. I am trying to restore my previous music collection, which I thought got deleted off my ipod. So I went into my "previous itunes libraries" folder and tried opening what looks like my old music library befo
-
Ot: using javascript within asp
Hi - I'm new to asp and badly in need of help. On one page I'm using several recordsets from the same database. The code for each is repeated wit only a couple of variables being changed. I'd like to save code by creating an array and letting the arr
-
Why does iChat take sooooooo long to load a saved conversation?
I don't know if it's just my computer, but it takes really really long for iChat to load a saved conversation. I opened one last night, and it took 32 minutes to open. That's terrible. In the meantime, it lagged my whole computer and logged me out of