Help View creation

Hi Friends,
I am trying to create help view from se11.
It is taking me to a similar screen as in maintanace view. But after activating am not able to run it. can you please tel me the step by step procedure to create a help view and how it is used and how to exceute it.
Thanks
Ramya

Hi
->If the selection method for a search help is a database view, the input help displays only the records for which there are entries in all the tables involved in the view (inner join). The set of possible entries is sometimes described by the entries in a primary table for which additional optional information can be added from further secondary tables. This view on the data can be implemented with a help view. The same outer join logic is used for help views as for maintenance views.
->A help view is defined analogously to a maintenance view. Help views can only be used as selection methods in search helps. Since the R/3 System cannot pass the selection directly to the database using a help view, it must generate its own access routines. The database view should therefore be used as selection method in preference to the help view.
->Selection using a table and text table corresponds to selection using a virtual help view. For this reason, a virtual help view should not be created in this case. Exception: The table contains a field having the same name as a non-key field of the text table. If this field of the text table is needed in the search help, you have to create a help view on the two tables because the field in the search help cannot be accessed directly.
reward if usefull

Similar Messages

Regarding creation Of Help View

Hi , Can Any body Tell me what is the step by Step Procedure how to create the Help View. Plz it's urgent .
Thanks&Regards .
Nihar.

Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Reward points for useful Answers

Reg View creation in Generic

Hi SDN,
Im trying to create Generic Data source of View Method. I wanted to create View on BSID ( Closed Customer Invoices) and BSAD ( Open Customer invoices) Tables, But while creating its giving error as "THERE IS NO RELATION BETWEEN THE TABLES" I want to know how to create Relation Between the tables. Both BSID & BSAD are standard tables, so we cant make any changes.
Please let me know the procedure to bulid Rlation between the tables.
Regards
Sujan

Hi Siva,
You have to give relation between these two tables in tab "Table/Join Conditions".
Creating Views:
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
View creation fr generic extraction
Hope it Helps

Set operator NE in Database View creation in join condition

Hi Experts,
I have a requirement to set NE(not equal) operator in join condition of Database View creation. Could you please help me how to set in operator.
Join condition :
Ex : BSAK-AUGBL NE BSAK-BELNR.
You know that by default operator is '='. i want to set NE in place of '='.
Thanks,

Hi Chinna,
Check whether if there is any possibility or not to include more key fields like bukrs, lifnr, gjahr etc in the where condition, so that you query may result faster. Then, there won't be any necessary to create the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Automatic storage location view creation in maintenace order (IW31)

Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PM

Hi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards

Personalized view creation in OA Framwork

HI ,
I am developing a search Trasaction in OAF using Query Region (AtuoCustomization Mode ). I developed the simple search and advanced search with dyamanic where caluse (I am setting the where clause and not using the where caluse genrate by Search Framwork ) . now i have to develope the personalized View page . i am using same method used in simple search and advance search for genrating where caluse dayanamiclly . but problem is that in personiazied view i am not able to invoke that method as i am not getting the how to handle the apply and apply & view result button in view panal . if anyone work on personalized View creation or know anything about creation of personalized view , please share your knowladge . its urgent , please help me
regards,
Vishal

Looks like you are running a page which is part of a multipage transaction. Check the page function and make sure that page is not expecting any parameter, all the corresponding class files are present in the myclasses folder.
--Shiv

View creation fr generic extraction

Hai Experts,
when we are create view from two different table ,wht is the crieteria that should satisfy between tables..... and at the time of datasource creation which type we need to select (master/trans)..as i found both master and transaction field in one table
Can any one send the step by step process to create view..
I have one more scenario ie .,i need to create a datasource from tables which belong to diff applications and their primary key is different ,can any one tell me how to create a datasource using function module,step by step process..
thnks in advance,
Regards,
Suri

hi,
try these links for view creation...
http://help.sap.com/saphelp_nw04/helpdata/en/f5/35c83ecedc636be10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9b/43473ccf20514ee10000000a114084/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
http://www.sapdb.org/7.4/htmhelp/ee/1c5be2eba711d4aa2800a0c9430730/content.htm
hope it helps...

Tree View Creation error

Hi,
I have to create tree view. I followed the stpes mentioned at the following link.
Tree View
I have created a Z-structure and created a table view in the component BT111H_OPPT component.
While trying to modify the .htm page for the tree view, with the code mentioned at above link, I am getting following error.
"node_tab is unknown. Not declared by a data statement."
(see the line number 4 - nodeTable = "<%= mytreenode->node_tab %>")
I am using the following code.
<chtmlb:tableExtension tableId = "Table"
                       layout = "FIXED" >
<chtmlb:configTree id                        = "configTree"
                     nodeTable                 = "<%= mytreenode->node_tab %>"
                     nodeTextColumn            = "NODE_TYPE"
                     onCollapseNode            = "nodeCollapse"
                     onExpandNode              = "nodeExpand"
                     onRowSelection            = "select"
                     onNodeClick               = "nodeClick"
                     ajaxDeltaHandling         = "FALSE"
                     headerText                = "Demo Tree"
                     allRowsEditable           = "TRUE"
                     selectionMode             = "SINGLESELECT"
                     table                     = "//mytreenode/Table"
                     tableLayout               = "AUTO"
                     visibleRowCount           = "12"
                     usage                     = "EDITLIST"
                     fillUpEmptyRows           = "FALSE"
                     personalizable            = "TRUE"
                     scrollable                = "TRUE"
                     noFrame                   = "X"
                     downloadToExcel           = "FALSE"
                     onClose                   = "closeTree"
                     onIncreaseSize            = "increaseTree"
                     nodeTextColumnDescription = "NODE" />
</chtmlb:tableExtension>
Please let me know where and how should I decalre it.
Regards,
Ansal

Thanks Arun.. for the quick response...
After view creation, I was directly following your second section of the thread....
My issue is resolved....
Hope to get further help for this object development.
My requirement is add a new assignment block in opportunity screen which will show all the quotation,with their details, created for this opportunity and on click of each quotation id, all the items mapped to that particular quotation should be visible in same view.
Thanks & regards,
Ansal

Is there any hope for Help Viewer?

I have read through as many discussions about Help Viewer problems as I can find, and still, help in Finder doesn't work. I have tried all of Dr. Smoke's suggestions and many others to no avail. Help Viewer still ends up going back to a blank screen, links that don't work, and the search just keeps searching.
All of the suggestions I have tried fix Help Viewer temporarily, but it has always gone back to its same old broken self.
If anyone out there can REALLY help, I would REALLY appreciate it.
Thank you!

Hi Jordan. Hopefully I can offer a solution for this which bugged me enough to really try to resolve it, and have now done so, at least for me.
First the essentials.
System Setup: Powermac G4 Dual 1GHz MDD. 1GB. MacOS 10.4.3
Issue: Loading Mac Helper from the Finder will result in a blank screen after the first launch. On first launch you will be able to click one or two links then it will not work and search will not function [issues may vary but blank screen always]
This problem occurred with earlier versions of Tiger. I have since done a clean install. Tried replacing the Help Viewer app from the Install disk and also the MacHelp.help document too, but it did not help. I even tried the same items from other disks just to check for corrupt files but still no change. Trashing the prefs does not seem to make any difference, nor the same with the cache folder but it can resolve other issues, just not this particular one.
NOTE Before others try this fix I strongly suggest you try the solutions suggested by Apple and those on the very good XLab web site. Here are a few related articles:
XLab. The most comprehensive guide to the Help issues.Check out the 'Help Viewer displays a blank window.' link.
http://www.thexlab.com/faqs/helpviewer.html
Apple. From the source. Not quite the same symptoms but offers Help advice on
'Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits'
http://docs.info.apple.com/article.html?artnum=107013
Solution:
1. Go to User > Library > Caches > com.apple.helpui [note: you need to launch Help Viewer at least once so that this folder is created]
2. Delete ALL files/ folders in the com.apple.helpui folder, if any.
3. Create a new folder inside com.apple.helpui and name it 'Mac Help' [the same as that created automatically by Help Viewer, case sensitive].
4. Select the new folder and use Command + I to see the folder 'Info'. First
label it red [to aid further diagnostics] and then change ALL the permissions at the bottom to *Read only* [click Details to see the options, not just 'You can'. Include Read only for 'Owner', 'Group' & 'Others'. You will need Admin access for this]. Close the Info panel.
5. Launch Mac Help from the Finder menu bar. If it was blank before, the Help Viewer screen should show the Mac Help homepage again. Try several links and search and Index. They should all work, and quicker now. Quit and relaunch. This time the Help Viewer works now and no blank screen. The issue with Mac Help is fixed ( but be aware that any other Help folders created could well cause the same issue, so check for these if it still happens and read on for details of how to deal with this other part of the issue)
*BUT*
Although this resolves the Mac Help issue, AS SOON AS OTHER MAC APPLICATION HELP's ARE LAUNCHED, IT IS MOST LIKELY THE ISSUE WILL RETURN!, hence the labeling of the Help folders red, to track newly created Help folders (i.e. Mail Help, Safari Help etc). If these are launched this automatically creates help folders in com.apple.helpui for them and they also cause the blank screen problem.
So, the best thing is to create Help folders in the same way that you did for Mac Help, for ALL Mac applications to avoid having to do it incrementally as and when you use another Mac application Help [or if you do a search it may well create folders anyhow]. These are the Help folders I have created, with the red label and 'Read only' permissions:
Activity Monitor Help
Address Book Help
AirPort Help
AppleScript Help
Automator Help
Bluetooth Help
Calculator Help
Chess Help
Console Help
Dictionary Help
Directory Access Help
Disk Utility Help
DVD Player Help
Font Book Help
Grapher Help
iCal Help
iChat Help
Image Capture Help
Mac Help
Mail Help
ODBC Administrator Help
Preview Help
QuickTime Player Help
Safari Help
Script Editor Help
Sherlock Help
Stickies Help
System Profiler Help
Terminal Help
TextEdit Help
There are probably more but these are the ones I could find fairly easily. If they are labeled red then it is easy to see if any others appear and cause the issue. Once I have done this I make a backup copy of these folders with the permissions set and archive it for use as and when I need to replace them.
Result: For me and my setup this has resulted in my being able to use Help normally without the blank screen issue for nearly two weeks now since I spent a lot of time looking at this issue. In fact I find Help works a lot faster and suffers fewer delays. Because this only requires amendments to file permissions, in a folder which is automatically replaced if deleted anyhow, I feel it is a safe and easy enough for most users to do if they have this problem.
I hope this offers a solution to other users with the same issue and who have tried the other suggestions (Including Dr. Smoke's and from Apple etc) but still have problems with the blank screen.
The Cause & Other Notes
Having been frustrated with this issue for several months now I spent some time trying to find the cause. It clearly does not effect everyone, and others have found the suggested fixes, such as trashing the com.apple.helpui cache folder and relevant preference files, have worked for them. It makes it a more complicated problem to identify. It appears perhaps to be related to your type/ speed of connection from the computer to the Apple help servers where the cache folders and files and downloaded from. This seems likely from error messages. It also appears that, for whatever reason, some of those files being automatically created when Help Viewer is launched are the actual problem. In order to explain why I think that, if you have this issue then you should get the exact same repeatable test which led me to find the solution.
Do this:
1. Firstly navigate to > Library > Caches > com.apple.helpui and trash this folder. Then before proceeding launch the following apps to help diagnose and follow what is happening:
a. Console [so you can watch for error message in console.log window]
b. Activity Monitor [to watch internet traffic during launch and browsing the Help Viewer]
c. Leave the FInder window so you can watch what happens.
2. Launch Mac Help from the Finder menu bar. It should launch and show the home page on the screen. Immediately you will see a new com.apple.helpui folder being created. Navigate into this so you can watch what is being placed in the newly created com.apple.helpui folder.
3. Now click on any of the Help links on the right (not the link to the apple web site). Immediately (slower if dialup and not already connected) you should see traffic over the network as the computer connects to the Apple help servers. Then, in the com.apple.helpui folder you will see a new folder called 'Mac Help'. Also some other numbered (0-15) cache folders which are not of interest right now. And on quit a file called 'TOCCache.plist' which does not effect things. Soon you should see an error in the Console console.log window something like this:
"2005-11-19 01:57:45.585 Help Viewer[1313] Exception raised during posting of notification. Ignored. exception: * End of archive encountered prematurely at 400"
I am not sure exactly why this is but it appears to be related to some sort of timeout and failure to fully download some items.
4. Now try to click on any link or Index. For me, nothing happens and I get only more error messages like:
"2005-11-19 02:02:21.190 Help Viewer[1313] Uncaught exception - * End of archive encountered prematurely at 400
2005-11-19 02:02:21.190 Help Viewer[1313] * Attempt to remove unrecognized exception handler 0xbfffdce0"
The only option is to quit out.
5. Immediately relaunch Mac Help. If it is like me then it will now be a blank screen accompanied by the following my critical error message:
"2005-11-19 02:03:33.543 Help Viewer[1319] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 375df0 and selector '_setupTOC'"
Now, everytime I quit a launch Mac Help it is the same error and blank screen.
This seemed to me to point towards an issue within the com.apple.helpui folder because when it is trashed Help Viewer will launch one time then stop.
So I went through each folder (I had a number of Help folders the first time) and tried moving it out of the folder, rather like testing for bad prefs in OS8.
Eventually I tracked the offending file/s down to this:
User > Library > Caches > com.apple.helpui > Mac Help > Contents > Resources > English.lproj > pgs > pgs.helpindex
As soon as this file is created then it all stops. Trash this file and relaunch and the homepage appears again until it appears and once again the problem reappears. This is totally repeatable for me.
Once I had isolated the problem file I tried various solutions to resolve it. The first was to replace it with the same file which is already in the System within the MacHelp.help documentation here (the system Library, not the User path)
Library > Documentation > Help > MacHelp.help
Copy MacHelp.help and then use Command + I and 'Show Package Contents' to navigate to:
MacHelp.help > Contents > Resources > English.lproj > pgs > pgs.helpindex
(right at the bottom of the pgs folder with hundreds of .html files)
I then replaced the existing pgs.helpindex with this one. It is different at it has an earlier Created date of 16/03/2005 (my vary), the one in the cache folder is Created 20/10/2005 (may vary?)
This allowed Help Viewer to launch correctly, but after a short time and re-launch it returned to the blank screen. Examining the file showed it was being overwritten by the later downloaded version, the one causing the problem. This led me to change the permissions to 'Read only' to prevent it being overwritten and after this the Help Viewer worked normally on relaunches.
I also changed and altered the permissions on the pgs/pgs2.helpindex folder in the same directory as the pgs folder as it seemed to also cause a problem.
So, finally I resolved the problem, with no error messages, the Help Viewer loading correctly and a working Help. However, I noticed that after a while the blank screen came back. Knowing the pgs.helpindex was OK it seemed likely that other .helpindex files in other Help folders created in the com.apple.helpui folder. This proved the case because, on trashing the new Help folder, it launched again. Swapping the downloaded .helpindex in say, Mail Help, and changing the permissions fixed it, until another Apple application Help folder was created and it re-occurred. The problem does not occur with all the Mac application Helps, but with some (notably for me, Mail Help, Safari Help and some others).
Finally I found that rather than digging into the apps contents I could get the same fix and also quicker Help browsing by simply creating the actual Help folders as described above and ensuring the .helpindex (or other folders/ files like idx) was not created.
From nearly two weeks trials it so far appears to completely resolve this issue.
Just be aware of any new Help folders/ files being created.
The are a few other observations:
1. I tried just altering the permissions on the actual com.apple.helpui folder to 'Read only' but whilst it allowed the Help Viewer to open fine, it broke links within the application Help windows.
2. I have not tried many Helps on other non Apple applications. I find that Toast help triggers error messages:
"2005-11-19 02:27:02.229 Help Viewer[1340] -[IdxSearchController openIndices:] caught a VTWIN exception. Bad index file is /Applications/Toast 7 Titanium/Toast Titanium.app/Contents/Resources/English.lproj/Toast Help/Toast Help idx
It is not possible to change the 'Toast Help idx' as it is an exec file. The errors do not seem to break Help Viewer. I had similar error messages from Quicktime Help when it loaded. I suspect that the Toast help is broken for similar reasons as mac Help b (it works for links to installed pages but not external ones). But it could be from the alterations to the Help folders. Either way at least Help works.
3. It is possible to get most .helpindex files from the relevant application contents but just using the Help folders is a quicker solution.
4. I can't help feel that the difference between those that have or do not have these issues is a slower connection, i.e. non-broadband. I have a 64k ISDN connection through a router which is pretty much 'always on' with solid 7KB speeds, but it seems this is insufficient for Help to work properly. I read elsewhere that connection speed appears to be an issue and Help is sensitive to this. It would be interesting to know what type of connection people with the issue have. I also have a hardware firewall in the router which may be a factor but it does not stop any other normal traffic and allows the files through anyhow. It has been in place for 6 years and with no issues. Just wanted to note it.
5. Certainly for my situation, it appears that the files being downloaded from the Apple help servers are actually causing the problem at my end. I can't explain why or how other than the tests explained above are repeatable and that using the same file but from the System file resolves the problem. It remains unclear why a slower connection would lead to files downloading which affect some people but not others? It may be something totally different of course but the error messages in Console do seem to point towards this.
6. I imagine the reason why the files and folders are downloaded are to ensure that they are kept up to date, as the pgs.helpindex for instance is a later creation date. However I do not seem to have any problems browsing or looking at topics, especially with the 'Include product Support Searches' option selected in the Help View menu. It means that there is extra traffic but gives a wider range of responses from Apple. Perhaps it is better to deselect this option if you have a slow dialup connection?
Summary
I hope that this solution can help others with this issue and perhaps other related problems. There is no way of me testing it further and I do not know how others who seemingly do not have a problem can check this. I just know it resolved it for me. I am no expert but a long time Mac user who is used to simple and elegant functionality, not the ongoing saga of the current Help, and wanted the thing just to 'work'.
Good luck
Simon

Cf# file, lost help viewer, & mouse tracking speed very fast...

Yes really ! - I do believe it all happened at once.
No recent system changes/updates/hacks - OS has latest updates - all worked splendidly...until:
put the mac to sleep, back 1/2 hr later & changed mouse batteries - woke it up & mouse speed is superfast,help viewer wasn't working & files starting with cf# keep appearing momentarily in ~/library/preferences/ . the format seems to be cf#xxxxx - a different one each time
maybe the file thing is nothing to do with it? - but would be interested in what it is.
Help viewer fixed by trashing cache & plists - now fine
Mouse speed can be slowed to a crawl using sys prefs-mouse & keyboard-tracking speed but just one step up from that; it's superfast again. The speed does increase even more if the slider is moved higher.
So Question - finally! - is this lot related in any way?
what's the cf#7zgE1 file about?
what other files might compromise the mouse tracking speed ( I have no mouse-enhancing software )
Thankyou

re: cf#xxxx files, you wrote:"I'd love to, but they appear/disappear in an instant - took 7 attempts with grab to get a shot that included one. Nothing in console, no startup/login items at all."The information macjack provided in the link you cited isn't particularly relevant. All that document describes is the Mac OS X facilities for creating and managing preferences files, part of Core Foundation Framework. It doesn't explain the cf#xxxx files, it merely discusses preferences from a programmer's perspective.
Since the appearance of these, and their mention on the Discussions, is a relatively new phenomenon, I'd be more inclined to suspect they are the side effect of some third-party application you may have installed recently, e.g. some bit of new shareware, a widget, etc. Such an app may be temporarily writing and removing those files, but the fact that they begin with "cf" may have been a developer's choice. The file names don't even correspond to the standard for preferences files. Just because they're in the Preferences folder does not make them preferences.
I don't see them on my system. You'll have to monitor apps you launch, running widgets, third-party menu extras, etc. to see if the creation of the files begins after some such process is launched.
If they show up, as you noted, with just Mail and Safari running (assuming you did not open Dashboard, which results in all widgets being launched), then they could be the result of either an Internet plug-in or a Mail plug-in you might have installed.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

View creation very slow - not materialized view

I have a view creation script which is running in a fraction of a second in the dev environment but takes over an hour to run in the test environment.
The test environment is off-site, so I have no direct access to it. It does have a lot more data in than dev, but this is not a materialised view so as far as I understood it the amount of data in the system shouldn't affect the time to create the view.
I haven't been able to find any information on what can make this happen. In the development environment I can be querying the view (or can lock it directly), and am still able to run the CREATE OR REPLACE statement without any performance impact. The view does contain function calls and is created with the FORCE keyword, but I can't find any evidence that this should affect the speed of creation.
I am running Oracle 10g (10.2.0.4.0) on Solaris in both dev and test environments.
Any ideas on what could be causing this are very welcome.
CREATE OR REPLACE FORCE VIEW DB_OWNER.PER$AGE
SYSTEM,
LOCATION,
EVENT_START,
SURNAME,
DOB_STRING,
DESCRIPTION,
GENDER,
OLD_ID,
URN,
COMBINED_SCORE,
LOAD_DATETIME,
AGE,
EVENTDATE_FROM,
EVENTDATE_TO,
DETAILS,
AOB
AS
SELECT /*+ leading(ad) */
p.system,
p.location,
p.event_start,
p.surname,
CAST (
NVL (
NVL2 (
p.dob,
TO_CHAR (p.dob, 'dd/mm/yyyy'),
TO_CHAR (
p.apparent_age
+ ROUND ( (SYSDATE - p.created_datetime_from) / 365, 0))),
0) AS VARCHAR2 (10))
AS dob_string,
p.description,
p.gender,
p.old_id,
p.urn,
NVL2 (
p.dob,
db_owner.app_age_score (p.dob, ssearch.get_target_age),
db_owner.age_score (p.apparent_age,
p.created_datetime_from,
ssearch.get_target_age))
AS combined_score,
p.load_datetime,
psd.age,
psd.eventdate_from,
psd.eventdate_to,
e.details,
NVL (e.aob, 'N/A') aob
FROM db_owner.person p,
db_owner.psd psd,
db_owner.entity e
WHERE p.db_key = psd.db_key
AND psd.age IS NOT NULL
AND e.system(+) = p.system
AND p.system IN (SELECT internal_name
FROM ops$tomcat.feed_details
WHERE inSearchList = 'true')
AND e.urn(+) = p.urn;

Hi,
Thanks for the response.
Trying the same thing without the FORCE keyword made no difference, the view still takes a long time to compile and there are no compilation errors.
On the development system, I have run a long-running query on the view and checked V$Access. This returns a record for the view, but I can still successfully run the CREATE OR REPLACE statement on the view in another session. This appears to show that a record in V$Access doesn't mean that the view can't be recompiled.
On the test system there are no other sessions connected and no records for the view in V$Access.
Does anyone have any other ideas?

View creation in SE11

would anyone please explain how to create views in SE11 with screen shots
Thanks in advance

Hi sunnype,
First you read the below then you can see SE11.
Here i explained shortly.
View
Definition
A view describes the layout and behavior of a rectangular area of a user interface.
Use
Every Web Dynpro application has at least one view. The layout of a view is made up of different user interface elements, which can be nested in each other. The positioning of interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The data to which the elements of the view can be bound are stored and managed in the view context, enabling them to be represented or used on the screen. The view controller can contain methods for data retrieval or for processing user input.
Multiple views can be classified in view sets.
A view also has inbound and outbound plugs so that views can connected with each other, or so that a view can be linked with an interface view. These plugs can be linked with each other using navigation links.
Empty View
The empty view is a special type of view. It is always generated automatically in a window or a view set area, provided that no view has been embedded manually. It may also be preferable to embed an empty view in a non-empty window as well. Just like a normal view, the empty view occupies a certain area of a window at runtime and can be used to hide a different view, for example, using specific controls.
When you create an empty view, an inbound plug with the default name ShowEmptyView is created.
And read the below these views also
Views
Data about an application object is often distributed on several tables. By defining a view, you can define an application-dependent view that combines this data. The structure of such a view is defined by specifying the tables and fields used in the view. Fields that are not required can be hidden, thereby minimizing interfaces. A view can be used in ABAP programs for data selection.
The data of a view is derived from one or more tables, but not stored physically. The simplest form of deriving data is to mask out one or more fields from a base table (projection) or to include only certain entries of a base table in the view (selection). More complicated views can comprise several base tables, the individual tables being linked with a relational join operation. See also Join, Projection and Selection.
The base tables of the view must be selected in the first step of a view definition. In the second step, these tables must be linked by defining the join conditions. It is also possible to use the join condition from a foreign key defined between the tables (see Foreign Key Relationship and Join Condition). In the third step, you must select the fields of the base tables to be used in the view. Selection conditions that restrict the records in the view can be formulated in the fourth step.
Four different view types are supported. These differ in the way in which the view is implemented and in the methods permitted for accessing the view data.
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data distributed on several tables for one application object at one time.
Database views implement an inner join. The other view types implement an outer join (see Inner and Outer Join).
The join conditions for database views can be formulated using equality relationships between any base fields. The join conditions for the other view types must be obtained from existing foreign keys. Tables therefore can only be combined in a maintenance view or help view if they are linked to one another with foreign keys.
The maintenance status defines whether you can only read data with the view or whether you can also insert and change data with it.
See also:
Example for Views
Creating Views
Deleting Views
if any doubts then see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/b3/b3243ee9399a0be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ec5d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
if it is useful kindly reward me

How to use Help View 2 in standalone Winform app similar to VS Package Help2 from DTE2

Hello,
We are successfully obtaining a DTE2 object and then the Help2 object to connect our context id names with triggering the Help Viewer 2 in a VS package but can’t seem to do the same outside of VS.
Here’s a sample of how we handle getting it okay from the VS package code:
dte2 = Package.GetGlobalService(typeof(DTE)) as DTE2;
help2 = (Help2) dte2.GetObject("Help2");
Then we can set out context id like this:
helpId = “MYFORMCONTEXTIDHERE”;
help2.DisplayTopicFromF1Keyword(helpId);
Within VS this works fine for our package. However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
Given all this…and us not wanting to use the older CHM HelpProvider winforms approach, is there any way we can achieve what the package version is doing in a pure Winforms application?
Thanks,
Michael

Hi Michael,
Thank you for posting in the MSDN forum.
Based on your description, I’m afraid that it is not the correct forum for this issue, since this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To help you find more useful information or find the correct forum for this issue, would you mind letting us know more information about it?
It is the WinForm developing issue, am I right?
You said that you use the DTE 2 object, is it related to the VS extension?
>> However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
I did some research about it, the following case and document shared some information about the “Get References to the DTE and DTE2 Objects”, it seems that it also shares some information about “Get an instance of the currently running
Visual Studio IDE” like the code here:
// Get an instance of the currently running Visual Studio IDE.
EnvDTE80.DTE2 dte2;
dte2 = (EnvDTE80.DTE2)System.Runtime.InteropServices.Marshal.
GetActiveObject("VisualStudio.DTE.11.0");
Reference:
http://msdn.microsoft.com/en-us/library/vstudio/68shb4dw(v=vs.110).aspx
Another case:
http://stackoverflow.com/questions/21986644/use-addin-project-in-another-application
If still no help, I might not have the correct detailed answer you need, but I might lead you into the right direction to solve your problem.
If it is the WinForm developing issue, you could select the correct forum here:
https://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winformsdesigner%2Cwinforms%2Cwinformsdatacontrols&filter=alltypes&sort=lastpostdesc
If it is related to the VS extension, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsx
If I have misunderstood this issue, please feel free to let me know, I will help you find the correct forum for this issue as soon as possible.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help View creation

Similar Messages

Maybe you are looking for