Help with 30" mounting scenario

Can someone tell me if it will be possible for me to mount an Apple Cinema 30" display on one of these? The description says "Adapts to RTM and CTM mounts"...
http://www.racksandstands.com/Premier-Mounts-PSD-BW-PM1324.html#ProdDetails

Hi-
With a VESA mount adapter and the appropriate bracket to attach to the stand, Yes, it's possible to do so.

Similar Messages

Help with idoc-file scenario

Hello,
I am doing IDOC - File scenario.
(source is DEBMAS and reciever end, there is flat DT with no heirarchies as of now. )
The requirement is that if the segment at the source side has multiple lines of " sold to party " values, then customer bill should also have multiple lines with account number different for each line. Can I acheive this using "split by value"? if yes please help me.
Regards,
Haritha

Use the sold-to-party node to create the row node of the file...if some of the elements in the sold to party node have to duplicated/repeated use the one as many function.

Need help with a Webdynpro scenario

Hi,
I have the following scenario.
I have a webdynpro application (form) which allows the user to change some data. When the page loads, the data already available is displayed in the corresponding UI elements in the form. This is done using a BAPI call. Then after the user modifies the values and clicks modify, the corresponding values should be updated using a different BAPI call.
Here, for displaying the values at first, I have mapped the view context to the controller context and in turn to the corresponding model. But to update using a different Model class, how can we map the updated values dynamically, say on submit? Can the view context attributes, mapped to multiple controller context attributes? Or is there any other way to acheive this.
I have another question. I have a dropdown UI element in the same application. It is populated with data coming from a BAPI call. But how can we set the selected value to the one which the user has already stored previously? Remember, the user is modifying the values.
thanks in advance!
KK

Hi KK,
You can achieve the same by copying the UI attributes to a new node in the controller using copy corresponding( i am assuming your node structure and name remains same). You can then pass this node to the 2nd BAPI.
and when you get the next display the 1st BAPI will get you updated data.
For the UI dropdown also, you can persist the data in a value node and then check if the dropdown model node for this element and set it default. OR there needs to be some sorting in the BackEnd.
Kind Regards
Asif

Need help with the following scenario

Hi guys,
I have to implement a solution which requires me to duplicated all the rows from a table to another in reverse order. For eg. I have table1 containing the following rows:
200, 350, 700, 90
All these numbers are sorted according to their ROW_ID_BLOCK_NUMBER. When these rows are replicated over to another table, say table2, it should be inserted in the following order:
90, 700, 350, 200
I do not have another column column that stores the running identity number for each row and I don't intend to implement that right now. I was wondering if that can be implemented using the DBMS_ROWID package and if so, how? Any help is greatly appreciated here. Thanks in advance.

In 10g, assuming you've built a table with row dependencies enabled
SCOTT @ jcave102 Local> create table a (
2 col1 number
3 )
4 rowdependencies;
Table created.
Elapsed: 00:00:00.04the ORA_ROWSCN pseudocolumn will tell you the SCN (system change number) of the transaction that inserted the rows
SCOTT @ jcave102 Local> insert into a values( 1 );
1 row created.
Elapsed: 00:00:00.07
SCOTT @ jcave102 Local> insert into a values( 2 );
1 row created.
Elapsed: 00:00:00.01
SCOTT @ jcave102 Local> commit;
Commit complete.
Elapsed: 00:00:00.00
SCOTT @ jcave102 Local> insert into a values( 3 );
1 row created.
Elapsed: 00:00:00.04
SCOTT @ jcave102 Local> commit;
Commit complete.
Elapsed: 00:00:00.01
SCOTT @ jcave102 Local> select ora_rowscn, col1 from a;
ORA_ROWSCN       COL1
   6270940          1
   6270940          2
   6270944          3
Elapsed: 00:00:00.09Sorting on that, assuming you insert the rows in the right logical order, should work (the documentation only guarantees that the SCN of the row is greater than or equal to the SCN when a row was modified, so it's not guaranteed, but I don't know of a mechanism that would cause the ORA_ROWSCN to change without DML affecting the row in this example so it's relatively safe, at least with your current Oracle version). If ROWDEPENDENCIES is not set, the default is that the SCN is tracked at the block rather than the row level.
Justin

Help with ordering EO scenario

Hi PI experts,
I've come across a scenario where the customer requires Delete records before Insert records but would like to have it using EO (so that if it errors, it processes subsequent records).
The messages are created from a proxy interface in CRM - would this be possible, and if so, how?
Thanks in advance!

hi Mark/Vivian,
Though it is batch job, unless you make sure that delete job executes first (till target), we can not insert the records.
The one way in can think of is, use the multiple statements in mapping, Statement 1 for delete and Statement 2 for insert and in rcv channel use the isolation level as "serializable". so that you can make sure that delete statement executes at database first then insert.
Now, when sending data to PI, just think about how effectively you can split the data. Means, create batch jobs based on plant or location ot club etc.. this way you can make sure that per a given plant data, delete job works first and then insert.
Hope this gives you an idea. please let me know your thoughts.
--Naresh

Please help with this simple scenario

I have two tables in two different instances, these two are linked by database link.
table A, base table
table B, read_only view connected through link.
I need them to be semi parallel in this way:
user queries emp_id to query tableA, if emp_id is available in table A, then just display id and emp_name, if nothing found, check if available in table B, if so then insert it on table A. If not available in table B, then display message.
I have tried, cursors, selects into, etc etc and no luck!, please if you time allows, write a sample code if possible.
thanks a bunch!!
joey

Hi,
fallow this,
1) Create segment (WE31) Of course it will have naming convention for different company. Here are some tips: If you copy from existing or std segment eg: Z1E1EDP01_01. If not you can just put Z1u2026.but this is only the example.
2) Create IDOC Types (WE30)
3) Create message type (WE81)
4) Link message type with basic type (WE82)
5) Create FM In the FM all the attributes should be the same for Inbound or Outbound. Basically you can get an example from the std FM eg: Inbound - IDOC_INPUT_DELVRY Outbound - IDOC_OUTPUT_SHPMNT.
6) Create Process Code (Inbound - WE41/ Outbound - WE42) IMPORTANT: Before you key in the FM, you are required to add the FM in this table V_TBD51.
7) Link FM with Basic Type For testing go to WE19.
Regard's
Shaik.

Need help with case/mount

I'm looking for something to hold my iPhone in the glove box of my BMW. Thx

I use an older fourth gen iPod in my BMW and always leave it in the glove box. I found the original Apple iPod semi-hard case with belt clip that used to come with iPods at that time.(no such accessories included these days unfortunately) I have my iPod safetly inside it inside the glove box. In that case it does not roll around.
I think you can still but these cases zt Apple stores. Else something like that type of case to protect the iPod would be all you need.

Need help with simple BPM scenario

2 places.
1. SXMB_MONI
2. CC Monitor

Hi...
Check the receiver communciation channel is correctly configured. Check in the SMQ2 and refresh it and also refresh the cahce.
Regards,
Leela

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

ISM with NAT44 - Need help with configuration

Hello everyone,
I'm trying to set up NAT44 in the following scenario below and I'm having a hard time figuring out how to redirect the traffic. As you can see the big problem is that I have one single interface that connects to the internal network (10.0.0.0/8) and also to the tunnel destinations all in the same VRF. Can you guys give me a hand? The trafiic comes from network network 10.0.0.0/8 enters interface bundle-ether 2 (Now it needs to be translated), once it is translated, now it needs to reach the destination known via GRE tunnel.
Configurations
vrf NAT_IN
address-family ipv4 unicast
vrf BLUE
address-family ipv4 unicast
hw-module service cgn location 0/3/CPU0
interface Bundle-Ether2
description UPLINK TO METRO ETHERNET
interface Bundle-Ether2.2 l2transport
encapsulation dot1q 2
rewrite ingress tag pop 1 symmetric
interface GigabitEthernet200/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface GigabitEthernet300/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface BVI2
description METRO
vrf BLUE
ipv4 address 100.0.0.10/24
interface tunnel-ip 101
description GRE_TUNNEL
vrf BLUE
ipv4 address 1.1.1.1/32
tunnel mode gre ipv4
tunnel source interface bvi 2
tunnel destination 200.0.0.1
interface BVI 100
vrf BLUE
ipv4 address [GATEWAY_100] [MASK_100]
interface BVI 200
vrf BLUE
ipv4 address [GATEWAY_200] [MASK_200]
interface BVI 300
vrf BLUE
ipv4 address [GATEWAY_300] [MASK_300]
interface ServiceApp1
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
vrf BLUE
ipv4 address 10.0.2.2 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
router static
address-family ipv4 unicast
vrf NAT_IN
address-family ipv4 unicast
0.0.0.0/0 ServiceApp1
10.0.0.0/8 vrf BLUE bvI 2 <NEXT HOP>
vrf BLUE
address-family ipv4 unicast
172.16.0.0/24 ServiceApp2
router ospf METRO
vrf BLUE
router-id [ROUTER_ID]
redistribute bgp 65500 metric 100
area 0
interface bvi 2
router ospf BLUE
vrf BLUE
router-id [ROUTER ID]
redistribute bgp 65500 metric 100
area 10
interface BVI100
interface BVI200
interface BVI200
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf BLUE
rd 65500:2
address-family ipv4 unicast
redistribute static
redistribute ospf BLUE
neighbor 1.1.1.2
remote-as 64512
ebgp-multihop 5
address-family ipv4 unicast
route-policy PASS in
route-policy PASS out
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
map outside-vrf BLUE address-pool 172.16.0.0/24
Thanks in advance,
Renato

Hi Somnath,
Let's see if you can help with this new scenario. I want to extend this NAT configuration to a new site (BO1), but instead of using this entire setup with ASR9K, etc, I just want to use ASR9000v module and have this AS9K + ISM as the host. The first problem I see in this scenario is that I have the same 10.0.0.0/8 network in both sites, network which will access the same resources as the devices in the 10.0.0.0/8 in the main site.
1) Do you think if I create a new inside VRF [NAT_IN1] would address this issue?
2) Can I use the same outside VRF?
Here is the configurations.
!! IOS XR Configuration 4.3.1
vrf NAT_IN
address-family ipv4 unicast
import route-target
   65500:2
   65500:3
export route-target
   65500:3
vrf RED
address-family ipv4 unicast
import route-target
   65500:1
export route-target
   65500:1
vrf NAT_OUT
address-family ipv4 unicast
import route-target
   65500:4
export route-target
   65500:4
vrf SATELLITE
vrf BLUE
address-family ipv4 unicast
import route-target
   65500:2
export route-target
   65500:2
hw-module service cgn location 0/3/CPU0
ipv4 access-list ABF
5 permit ospf any any
10 permit ipv4 any 10.200.0.0 0.0.255.255 nexthop1 vrf NAT_IN ipv4 10.0.2.2
20 permit icmp any any
interface Bundle-Ether3
description Uplink (BE3 - VRF NAT_IN) - VLAN 20
vrf NAT_IN
ipv4 address 1.1.1.1 255.255.255.0
ipv4 access-group ABF ingress
interface Bundle-Ether22
description LOOPBACK CABLE NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.1.1 255.255.255.0
interface Bundle-Ether23
description LOOPBACK CABLE BLUE
vrf BLUE
ipv4 address 10.0.1.2 255.255.255.0
interface 6
description Uplink (BE6 - Global) - VLAN 20,51,80-82
interface 6.2
ipv4 address 1.1.1.2 255.255.255.0
encapsulation dot1q 2
interface 6.51 l2transport
description EFP - BE6 - VLAN 51
encapsulation dot1q 51
rewrite ingress tag pop 1 symmetric
interface 6.80 l2transport
description EFP - BE6 - VLAN 80
encapsulation dot1q 80
rewrite ingress tag pop 1 symmetric
interface 6.81 l2transport
description EFP - BE6 - VLAN 81
encapsulation dot1q 81
rewrite ingress tag pop 1 symmetric
interface 6.82 l2transport
description EFP - BE6 - VLAN 82
encapsulation dot1q 82
rewrite ingress tag pop 1 symmetric
interface Bundle-Ether100
description Bundle to Satellite 100
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 100
   remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether200
description Bundle to Satellite 200
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 200
   remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether300
description Bundle to Satellite 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
   remote-ports GigabitEthernet 0/0/0-35
interface Loopback0
description MGMT SATELLITE
vrf SATELLITE
ipv4 address 10.0.0.254 255.255.255.0
interface tunnel-ip31101
description BLUE-TUNNEL01
vrf BLUE
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31102
description BLUE-TUNNEL02
vrf BLUE
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface tunnel-ip31103
description RED-TUNNEL03
vrf RED
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31104
description RED-TUNNEL04
vrf RED
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface TenGigE0/0/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/4
description LINK TO SATELLITE 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
   remote-ports GigabitEthernet 0/0/36-43
interface TenGigE0/0/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/0/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/1/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/0/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/1/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/0/0/22
description LOOPBACK CABLE TE0/1/0/22
bundle id 22 mode on
interface TenGigE0/0/0/23
description LOOPBACK CABLE TE0/1/0/23
bundle id 22 mode on
interface TenGigE0/1/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/4
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/22
description LOOPBACK CABLE TE0/0/0/22
bundle id 23 mode on
interface TenGigE0/1/0/23
description LOOPBACK CABLE TE0/0/0/23
bundle id 23 mode on
interface BVI30
vrf RED
ipv4 address 10.200.25.193 255.255.255.192
interface BVI31
vrf BLUE
ipv4 address 10.200.1.1 255.255.255.248
interface BVI32
vrf BLUE
ipv4 address 10.200.25.129 255.255.255.224
interface BVI33
vrf BLUE
ipv4 address 10.200.25.1 255.255.255.128
interface BVI36
vrf BLUE
ipv4 address 10.200.237.145 255.255.255.240
interface BVI51
vrf RED
ipv4 address 192.168.7.12 255.255.255.0
interface BVI80
vrf RED
ipv4 address 10.200.26.169 255.255.255.224
interface BVI81
vrf BLUE
ipv4 address 10.200.25.164 255.255.255.240
interface BVI82
vrf BLUE
ipv4 address 10.200.25.180 255.255.255.240
interface ServiceApp1
description NAT_IN
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
description NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.2.5 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
description ISM
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
prefix-set PS_ROUTES
10.200.0.8,
10.200.5.40/29,
10.200.1.0/29,
10.200.5.32/29,
10.200.0.144/28,
10.200.106.0/28,
10.200.106.16/28
end-set
prefix-set PS_BGP_BLUE_OUT
10.200.24.192/26,
10.200.5.40/29,
10.200.240.0/25,
10.200.1.0/29,
10.200.25.128/27,
10.200.25.0/25,
10.200.5.32/29,
10.200.26.0/25,
10.200.0.144/28,
10.200.27.128/27,
10.200.27.0/25,
10.200.106.0/28,
10.200.106.128/25,
10.200.106.16/28,
10.200.107.128/25
end-set
route-policy RP_DENY_ALL
drop
end-policy
route-policy RP_PASS_ALL
pass
end-policy
route-policy RP_BGP_BLUE_OUT
if destination in PS_BGP_BLUE_OUT then
    pass
endif
end-policy
route-policy RP_PASS_ROUTES
if destination in PS_ROUTES then
    pass
endif
end-policy
router static
address-family ipv4 unicast
0.0.0.0/0 1.1.1.20
vrf NAT_IN
address-family ipv4 unicast
   0.0.0.0/0 ServiceApp1
vrf RED
vrf NAT_OUT
address-family ipv4 unicast
   0.0.0.0/0 10.0.1.2
   10.200.24.192/26 ServiceApp2
vrf BLUE
address-family ipv4 unicast
   10.200.24.192/26 10.0.1.1
router ospf
log adjacency changes
vrf NAT_IN
router-id 1.1.1.1
disable-dn-bit-check
redistribute bgp 65500 metric 5 metric-type 2 route-policy RP_PASS_ROUTES
area 7
   interface Bundle-Ether3
router ospf RED
log adjacency changes
vrf RED
router-id 10.200.26.169
disable-dn-bit-check
redistribute bgp 65500 metric 10 metric-type 2
area 11
   interface BVI30
   interface BVI80
router ospf BLUE
log adjacency changes
vrf BLUE
router-id 10.200.25.164
disable-dn-bit-check
redistribute static
redistribute bgp 65500 metric 10 metric-type 2
area 0
   interface BVI81
   interface BVI82
area 2
   interface BVI31
   interface BVI32
   interface BVI33
   interface BVI36
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf NAT_IN
rd 65500:3
bgp router-id 1.1.1.1
address-family ipv4 unicast
   route-target download
vrf RED
rd 65500:1
bgp router-id 10.200.253.90
address-family ipv4 unicast
   network 10.200.25.192/26
   network 10.200.26.128/27
   network 10.200.26.192/27
   network 10.200.27.192/26
   network 10.200.104.128/27
   network 10.200.104.160/27
neighbor 10.200.253.89
   remote-as 64512
   ebgp-multihop 5
   update-source tunnel-ip31103
   address-family ipv4 unicast
    route-policy RP_PASS_ALL in
    route-policy RP_PASS_ALL out
    soft-reconfiguration inbound
neighbor 10.200.253.93
   remote-as 64512
   ebgp-multihop 5
   update-source tunnel-ip31104
   address-family ipv4 unicast
    route-policy RP_PASS_ALL in
    route-policy RP_PASS_ALL out
    soft-reconfiguration inbound
vrf BLUE
rd 65500:2
bgp router-id 10.200.253.90
address-family ipv4 unicast
   network 10.200.0.144/28
   network 10.200.1.0/29
   network 10.200.5.32/29
   network 10.200.5.40/29
   network 10.200.24.192/26
   network 10.200.25.0/25
   network 10.200.25.128/27
   network 10.200.26.0/25
   network 10.200.27.0/25
   network 10.200.27.128/27
   network 10.200.106.0/28
   network 10.200.106.16/28
   network 10.200.106.128/25
   network 10.200.107.128/25
   network 10.200.240.0/25
neighbor 10.200.253.89
   remote-as 64512
   ebgp-multihop 5
   update-source tunnel-ip31101
   address-family ipv4 unicast
    route-policy RP_PASS_ALL in
    route-policy RP_BGP_BLUE_OUT out
    soft-reconfiguration inbound
neighbor 10.200.253.93
   remote-as 64512
   ebgp-multihop 5
   update-source tunnel-ip31102
   address-family ipv4 unicast
    route-policy RP_PASS_ALL in
    route-policy RP_BGP_BLUE_OUT out
    soft-reconfiguration inbound
l2vpn
load-balancing flow src-dst-ip
bridge group VLAN30
bridge-domain VLAN30
   routed interface BVI30
bridge group VLAN31
bridge-domain VLAN31
   routed interface BVI31
bridge group VLAN32
bridge-domain VLAN32
   routed interface BVI32
bridge group VLAN33
bridge-domain VLAN33
   routed interface BVI33
bridge group VLAN36
bridge-domain VLAN36
   routed interface BVI36
bridge group VLAN51
bridge-domain VLAN51
   routed interface BVI51
bridge group VLAN80
bridge-domain VLAN80
   interface 6.80
   routed interface BVI80
bridge group VLAN81
bridge-domain VLAN81
   interface 6.81
   routed interface BVI81
bridge group VLAN82
bridge-domain VLAN82
   interface 6.82
   routed interface BVI82
nv
satellite 100
type asr9000v
ipv4 address 10.0.0.1
satellite 200
type asr9000v
ipv4 address 10.0.0.2
satellite 300
type asr9000v
ipv4 address 10.0.0.3
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
   map outside-vrf NAT_OUT address-pool 10.200.24.192/26
Thanks in advance,
Renato

Help needed with RA with Sales order scenario

Hello Gurus,
We are using SD-RR right now for our sales orders. We are facing difficulty with timing cost posting in that scenario and need your help with same.
When we do PGI cogs posting is done. RR usually happens at at later point of time after customer accepts the order. Out cost is booked before revenue recognition, which financially is bothering client. Client wants Cost and revenue recognized at same time.
I've heard that RA can be used with sales order item as cost collector. I want to understand how will it work functionally and what are the basic config elements.
If someone can explain step-by step I'd appreciate that very much.

Hi,
Follow the step
1) Create two user defiend Status for Sales order, one like X -Revenue & Cost to be recognised, and Y = ot to be recognised
2) Use Completed Contract Method in Expert more for Status Y and Revenue Based RA for Status X
3) Use Y as default Status in Sales Order. When you run RA, system will post costs to WIP and Revenue to Billing in Exess of Revenue. When ever you want to recognise revenue and Cost, change the status of the Sales Order as X, then Revenue based RA will be used.
Regards,
Rijo Paul

Need help with Sync/Async BPM Scenario

I have an R/3 RFC -> XI -> HTTP (to vendor A) scenario that is working fine. It is a totally synchronous call event. The Integration Directory pieces sit in a scenario named HotkeyOutbound.
Now I need to create a process for RFC -> XI -> HTTP (to vendor Panduit). The R/3 RFC is the same sender, but vendor Panduit only supports an asynchronous HTTP connection. I followed the Sriram Vasudevan weblog on Sync/Async Bridge and created my BPM. I am stuck on trying to determine what to set up in the Integration Directory.
First off, should I be able to use the same HotkeyOutbound scenario as with vendor A so all hotkey stuff can stay together? Or do I have to create a new scenario with a copy of the R/3 business system for the sender? I moved forward with a new scenario (PanduitHotkeyOutbound).
I also need to know how many config Agreements and Determinations to use. The image at http://webpages.charter.net/kpwendel/keith1.html shows what I have so far. Which are not needed? What is missing?
And I tried setting up an HTTP communication channel for outbound async to vendor Panduit and another for inbound async from vendor Panduit. XI won't let me set up a sender HTTP channel. Why not?
Thank you in advance.

I have yet to figure this out, and probably need to go back to my Integration Repository setup since my problems may start there. This screenshot shows my Repository objects.
http://webpages.charter.net/kpwendel/intProcess.jpg
HELP! These are the steps I took, with questions embedded.
(1) Created data type and message type for xml document (note that same format is used for request and reply).
(2) Created PANRequestAbstractInterfaceSync (abstract and sync) for first part of Integration Process. Should the input message be the RFC or XML message type?
(3) Created PANRequestAbstractInterfaceAsync (abstract and async) for 2nd part of Integration Process.
(4) Created PANResponseToBPM_MessageInterface (outbound async) for interface back into XI from partner. Is this needed?
(5) Created PANHotkeySync_to_Async_IntProc Integration Process to handle sync to async bridge.
- Wondering why PANRequestAbstractInterfaceAsync is the only message interface available when I make container object (PANMessage)?
(6) Created two Message Mappings to handle RFC data to XML mappings (outbound RFC-> XML and inbound XML -> RFC).
(7) Created Interface Mapping that includes both the Request and Response message mapping programs from step six. Source is the RFC and Target is PANRequestAbstractInterfaceSync.
- Do I need another interface mapping with Source being PANRequestAbstractInterfaceAsync and Target being the RFC?
Link to these steps and app diagram:
http://webpages.charter.net/kpwendel/PAN_Hotkey_Diagram.jpg
Thank you very much for your time.

Help with Security Scenario

Hi, I have a security scenario I am hoping someone can me help with.
Right now a user is authorized to "Sales Office" 100 only.
In the below scenario I need the user to be able to:
1. See Transactions where the "Sales Office" is 100
2. See Transactions where the "Sales Office of the Ship-To" is 100 even if they don't have access to "Sales Office" value.
So if the "Sales Office" is not 100, but the "Sales Office of the Ship-To" is 100 then they should see that as well.
Access
Sales Office
Sales Office of Ship-To
Yes
100
200
Yes
100
201
Yes
200
100
No
200
300
No
300
310
Yes
400
100
Yes
300
100
Yes
100
100
Note: Sales Office of the Ship-To is a Navigational Attribute of Ship-To Customer and is the same characteristic as "Sales Office"
Is there any way to accomplish this with 7.x Analysis Authorizations or any other method?

Hi,
Yes it's possible, check details in the document below :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7052dee3-bce5-2d10-5299-cd5d00ebeb72?quicklink=index&…
hope it helps.

Help with two scripts - Mounting remote DMG and Checking which network I'm connected to

Hey guys, I need some help with two separate scripts:
1. The first script I'm trying to create to mount a DMG stored remotely on another Mac using an AppleScript or shell script. Using the following:
set cmd to "hdiutil mount 'afp://username:[email protected]/Lion/Users/username/Desktop/Test.sparseim age'"
do shell script cmd
results in the following error:
error "hdiutil: mount failed - not recognized" number 1
I'm not very experienced regarding AppleScript or using hdiutil, could somebody point out what's wrong with my script?
2. The second script I'm working on to try and essentially prevent the 'Could Not Find Server' Finder dialog when a network mount is unavailable. I guess what I'd like it to do is detect which network I'm connected to, and if I'm connected to the correct network, then mount the shares, otherwise just fail silently without any errors. From the searching I've done, using try statements should do this, but they do not, and I'm still presented with an error dialog after the server cannot be found.
Does anybody have any suggestions on this script? Also, I've seen some tips regarding detecting which wireless network the Mac is connected to, which could work, but what about when connected via Ethernet?
Thanks!

Edit: I need to clarify on my first script request:
I need to mount the DMG on the remote Mac, not on the Mac I'm running the script from.

Help with Oracle Analytic Function scenario

Hi,
I am new to analytic functions and was wondering if someone could help me with the data scenario below. I have a table with the following data
COLUMN A COLUMN B COLUMN C
13368834 34323021 100
13368835 34438258 50
13368834 34438258 50
13368835 34323021 100
The output I want is
COLUMN A COLUMN B COLUMN C
13368834 34323021 100
13368835 34438258 50
A simple DISTINCT won't give me the desired output so i was wondering if there is any way that I can get the result using ANALYTIC FUNCTIONS and DISTINCT ..
Any help will be greatly appreciated.
Thanks.

Hi,
Welcome to the forum!
Whenever you have a question, please post your sample data in a form that people can use to re-create the problem and test their solutions.
For example:
CREATE TABLE     table_x
(      columna     NUMBER
,      columnb     NUMBER
,      columnc     NUMBER
INSERT INTO table_x (columna, columnb, columnc) VALUES (13368834, 34323021, 100);
INSERT INTO table_x (columna, columnb, columnc) VALUES (13368835, 34438258, 50);
INSERT INTO table_x (columna, columnb, columnc) VALUES (13368834, 34438258, 50);
INSERT INTO table_x (columna, columnb, columnc) VALUES (13368835, 34323021, 100);Do you want something that works in your version or Oracle? Of course you do! So tell us which version that is.
How do you get the results that you want? Explain what each row of output represents. It looks like
the 1st row contains the 1st distinct value from each column (where "first" means descending order for columnc, and ascending order for the others),
the 2nd row contains the 2nd distinct value,
the 3rd row contains the 3rd distinct value, and so on.
If that's what you want, here's one way to get it (in Oracle 9 and up):
WITH     got_nums     AS
     SELECT     columna, columnb, columnc
     ,     DENSE_RANK () OVER (ORDER BY columna        )     AS a_num
     ,     DENSE_RANK () OVER (ORDER BY columnb        )     AS b_num
     ,     DENSE_RANK () OVER (ORDER BY columnc DESC)     AS c_num
     FROM     table_x
SELECT       MAX (a.columna)          AS columna
,       MAX (b.columnb)          AS columnb
,       MAX (c.columnc)          AS columnc
FROM              got_nums     a
FULL OUTER JOIN got_nums     b     ON     b.b_num     =           a.a_num
FULL OUTER JOIN got_nums     c     ON     c.c_num     = COALESCE (a.a_num, b.b_num)
GROUP BY COALESCE (a.a_num, b.b_num, c.c_num)
ORDER BY COALESCE (a.a_num, b.b_num, c.c_num)
;I've been trying to find a good name for this type of query. The best I've heard so far is "Prix Fixe Query", named after the menus where you get a choice of soups (listed in one column), appetizers (in another column), main dishes (in a 3rd column), and so on. The items on the first row don't necessaily have any relationship to each other.
The solution does not assume that there are the same number of distinct items in each column.
For example, if you add this row to the sample data:
INSERT INTO table_x (columna, columnb, columnc) VALUES (13368835, 34323021, 99);which is a copy of the last row, except that there is a completely new value for columnc, then the output is:
` COLUMNA    COLUMNB    COLUMNC
13368834   34323021        100
13368835   34438258         99
                              50starting in Oracle 11, you can also do this with an unpivot-pivot query.

Help with 30" mounting scenario

Similar Messages

Maybe you are looking for