Help with 3d being disabled on Photochop CS6

I have recently received an error message that indicates that my graphics card is not able to handle 3d-this has not been the case-I also have been able to utilize Poser 9 and Daz 3d without difficulies. No the 3d portion of Photoshop CS 6 is disabled both on the 64 and 32 bit versions. Any suggstions for what I believe to be an error?

I am at work now so, cannot check in with device manager. I have a ATI Radeon 5770. This is from memory and I believe it has 1 gig of ram. I have been able to run Z Brush, Vue, Brice, Poser, Daz etc... with this card, so 3d does not seem to be the problem. I have also been able to run CS6 3d before example: using the postcard function in a graphic that I made.
John Waller <[email protected]> wrote:
John Waller http://forums.adobe.com/people/John+Waller created the discussion
"Re: Help with 3d being disabled on Photochop CS6"
To view the discussion, visit: http://forums.adobe.com/message/5337813#5337813

Similar Messages

Is there any way i can reset my i pod or open it with it being disabled and i dont have password, is there any way i can reset my i pod or open it with it being disabled and i dont have password?

is there any way i can reset my i pod or open it with it being disabled and i dont have password, is there any way i can reset my i pod or open it with it being disabled and i dont have password?

You will need to restore your iPod from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't sync then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht4097

Help with install of trial version Dreamweaver CS6

I can't launch the app'. Has anyone else noted a problem with mfc100.dll file? (The message returned when I try to launch DW points to this as being the problem.) I've tried reinstalling it but the same thing occurs. To test, and make sure it wasn't my computer or my error, I also downloaded Muse, which works fine.
Any help is much appreciated -- eager to use DWCS6.
Thanks!

Have you ever utilized Dreamweaver successfully on this computer? If not then please review your installation logs to determine if you received an error during the install process. You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Help with Textures, Element 3D and Photoshop CS6

Hello,
I thought this was the best place to ask my question due to the Photoshop details...
I am using Element 3D with CS6. I downloaded a model that was in 3DS Max format, so imported it into Photoshop and exported it as a .OBJ file so element could read it.
The model shows up in Element but when i go to apply the textures they do not work. I tried different file types from Photoshop (.jpeg & .png) but none are opened in Element.
Does anybody know why this is happening?
For easy access, i would like to stay within the Creative suite to do this type of work. It seems Photoshop CS6 has been updated enough for 3D that it should work. I realize Blender might be a better option but learning another program is a lot of work. So if I could ask for Photoshop specific responses (unless Photoshop just can not do this properly) I would would appreciate it!
Thanks

Thanks for your reply. As you can see, I am pretty green when it comes to 3D. I opened the model in Photoshop and it looked as it should be. I then went to "export 3D layer" and exported the model as a .obj for Element to read. Photoshop then displays a dialogue asking what format you want the exported texture files in. This is where I tried original, jpeg and png. None show up in Element.
Is there another step I am missing in Photoshop to prepare or export the textures? My model is RGB 8bit in Photoshop.
I have heard of textures being "baked" which would solve the texture issue but is know is not good for resolution. I mainly do video but am looking to add some graphic elements in my work. Being able to download models and incorporate them is all I am really after. Nothing crazy and I hope I can accomplish this without needing to become a 3D wizard.
Thanks for your help!

Help with Adobe Premiere Pro and AME CS6

Hi all,
First off, i would like to state that i'm pretty inexperienced in video editing, so please keep that in mind when answering or questioning something.I will try to explain my question to the best of my abilities, but please answer in a 'simple' manner, and don't shoot me when i miss something obvious.
I came across a 'performance?'-issue (slow exporting) for which i don't really know how to find the solution. I've been struggling with it for a while.
Your (any) help or insight is greatly appreciated!
My system:
Windows 7 Professional - 64 bit (Service Pack 1)
RAM 20 GB
Intel Core I73770 (dual quad core)
Direct x 11.0
Nvidia NVS 310
Adobe premiere pro CS6 (upgrading to adobe CC is unfortunately not an option)
Adobe media encoder CS6
They asked me to edit some video's on a regular basis, nothing complicated, just a 'training'-video. Length of video is about 2 hours edited.
File info:
Source file is 1920x1080 (1,0), 25fps, Upper, 2:11:10:24, 48000Hz, Stereo
There is one audio channel (left is standard mic, right is a shotgun mic) which is split to two audio channels, edited in aodbe audition (basic noise reduction)
I've been running into export times of over 12 hours (exported to mp4), which i'm guessing is a bit much.. . The slowness is also occuring with other export settings.
I came across a possible solution (in short: changing the Video Rendering and Playback in the project settings of APP) but that field is inactive for me...? what's up?
"Use Preview Files" works in CS5.5 but is "Useless" in CS6
I don't really know what to do from here, to figure out the solution. Any suggestions on fixing or troubleshooting the extremely long export times??
Thx in advance.

Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Help with InDesign spread previews in Bridge CS6

Our company is updating to CS6 and needs to be able to view InDesign files as spreads as we did in CS3. We produce many catalogs a year and each spread is a separate file. We use Bridge (CS3) to view the entire catalog at once. Now, with CS6, we can only see one page of the document, even though the preference is set to 2 pages in InDesign. We need an update. Please help!

I don't believe so. It's how Bridge displays InDesign files. In CS6, it's showing a single page and not the full spread that it used to. There is a preferance in Indesign that you can set the size and number of pages to preview. It's set to 2, which is the default.
This is a critical feature that needs to be restored. The link for the feature Request is not working, nor is the reporting a bug link.
After reading someone's comment, it appears that InDesign does not write the appropriate meta data for bridge to preview the spread, so perhaps it is an InDesign issue. Nevertheless, it has not been fixed since 2011!
How can I get through to Adobe???

Help with Force Lightning Adobe After Effects CS6

This video is perhaps the greatest force lightning video I've ever seen. Can anyone help replicate this in AE? The description says the guy was using the Hitfilm effects plugin for AE cs6. I have the plugin and CS6.

I don't know of anybody who uses HitFilm's plugin, so I can't offer suggestions based on it. However, I can say that it looks fairly straightforward. Start messing around with parameters and see what they do. I'll be you can adjust the end radius or size to make it larger so that it appears the lightning is getting closer to the camera.
As Mylenium says, this effect doesn't look like it offers much more than the Advanced Lightning effect that comes with AE and, in fact, looks to be more limited - though it might be easier for a beginner to use and understand.

I need help with upgrade from CS5.5 to CS6 Production Premium DISC version

Hi,
i bought the Production Premium CS5.5 in 2011. I then bought the CS6 Upgrade (the boxed version). After the security desaster at Adobe, the keys were invalidated. So when now years after purchase I wanted to use my product, Adobe said I had to download the file CS6 (6GB) from the Adobe server. I did that. After unzipping, the Installer says that a file is missing and I should use a tool which is now not on the Adobe site since it has been discontinued.
It would be nice if anybody had an idea how to get this to work.
Thank you in advance.
A former premiere fanboy that is now really annoyed.

Hi, thank you for the fast reply. I tried to put the downloaded file (7zip, CS6) und the small file (setup file 1MB) in a new folder with write priviledges. 150GB free space. It starts to unpack 3% then cancels due to insufficient space or a write priviledges error (none is true). I will try your link. Yes, I have both boxes here with the serial keys. CS 5.5 is installed on the PC so it should find it. The tool I mentioned is: Adobe - Adobe Support Advisor

Help with unlocking a disabled ipad 2! When I put it in recovery mode Itunes wants the password/ code that I've forgotten...

The computer says that it's extracting software etc then it gets to a certain point when it says, please enter ipads password / code...
This I've forgotten..
What can I do?

Hi and thanks for your reply,
it still doesn't work.
I ve followed the steps promted by iTunes three times and every time it gets to a stage when "it" says now enter the password or code to your ipad.
I have forgotten the password/code, and then it's back to square one again...?
Kind regards David

Help with texts being deleted?

My options were set that texts should be saved for 15 days. This morning all of my texts were deleted except saved texts. I figured maybe it just deleted all texts after 15 days maybe instead of deleting texts over 15 days old, so I set it on the "forever" setting, that they would never be deleted. I've gotten more texts today and they all disappeared again. I haven't changed any other options that should be at all related to my text options, and I don't know what to do? One of the texts actually deleted itself as soon as it came so I couldn't even read it. I have no idea what's going on. Phone is very new, only had it about two weeks.

This is happening due to memory constraints on your device. In BlackBerry when the device couldn't find enough free space for its work it clear out your text messages and call logs. You can check the amount of free space on your handheld from options -> Status -> free space (given in bytes).
For viewing details database sizes check the following - options -> Status -> click Menu button and select Database size. It’s recommended that you move your picture from device memory to Media card. Keep calendar items for pas 15 days and also keep messages for lower date range.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

HT1212 how do i get my ipod from being disable

need help with ipod being disabled

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

How to help with battery life in iOS 7

Some tips to help with battery life
-disable location services(for apps that do not need it)
-turn off ask to join networks under wifi, so your phone will not keep searching for networks unless you tell it to
-turn off airdrop/bluetooth if you don’t use it
- reduce motion off in settings>general>accessibility
-turn off automatic downloads in iTunes and app store in settings
-fetch mail manually in the settings>mail,contacts,calendars>fetch new data
-turn off raise to speak feature in settings>general>siri
-of course turn off notifications for apps that you do not need in settings>notifications
-turn off background app refresh in settings>general>background app refresh
-turn off 4g when you are connected to wifi under settings>cellular>enable lte/enable 4g

If you do not use Bluetooth devices, Settings > General > Bluetooth to OFF, when away from WiFi and not using a 3G unit, put Airplane Mode ON.
Change the email push setting to a long period of time.
Simple things that stop the unit from transmitting or seaking responses.

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

Help with system upgrade for CS6

Hello. I am hoping you can give me some advice on what to do (or buy) to improve my video editing system. I am a bit of novice when it comes to the technical/hardware end of things and I’m having some issues with my current system.
I working in Adobe CS6 Master Suite on a Windows 7 Ultimate PC. I mainly use Premiere Pro, After Effects, Photoshop, and Audition. I create very complete animations and videos with many layers and effects (via Boris & Red Giant). I also use Skype to record group video calls (with the program Evaer) for a reality T.V. recap show which I also edit with my Adobe suite. However I have two main problems.
When I render out a 20 minute premier pro project (with several HD video layers and effects) it takes almost 13 hours. It seems like this is very long considering my high end components, and set up. For example I run ONLY my OS off an SSD. My programs are on another SSD. The files I use for the video are on another HDD, and I render to another HDD. I was told by keeping all the aspects on separate hard drives it would speed everything up. Is that true? I also am now reading that rendering to a SSD would speed things up. Should I consider changing my workflow/hard drive set up that way?
My other problem is that when I record my Skype group calls of 4 people (with Evaer) to my SSD the audio is always off when I bring it into Premiere. I don’t know if this is a problem with Evaer, a codec (it records it as H.264/MPEG-4 AVC Codec. At 1280 X 720 and 30fps), that SSDs auto compress files, or that my system just cant handle it. Plus Soundblaster & Nvida both seem to active as audio features on my system I don’t know if that effects anything. Is there any advice any of you have on this issue as well? Perhaps another program to record skype or group calls?
Finally… all that aside. Considering the work I am doing should I just upgrade my system to a better Mobo and graphics card. I see a lot of people are recommending a dual processor work station. If so what is a good motherboard, and processor(s) I should get if I build my own workstation? I have about $4000.00 I could invest in building one if you think would greatly improve my work flow and render times. I also have a quadro k5000 on the way, and id like to be able to use the memory I have already.
I realize I am asking a lot of questions. I would truly appreciate any help, advice or just a point in the right direction. I have included my current system specs below incase that helps with any of my questions. If you have any other questions or need more information just let me know. Thank you again in advance for any help you can provide.
-Eric
MOTHERBOARD:
Gigabyte G1.Assassin http://www.gigabyte.com/products/product-page.aspx?pid=3752#ov
PROCESSOR:
Intel Core i7 X 980
5 HARD DRIVES:
(1) SATA II WD (WD15EADS-00P8B0) 3gb Hard Drive @ 1.5TB
(2) OCZ SATA AGILITY II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
(1) SATA DVD DRIVE
(1) SATA BlueRay Drive
RAM:
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
GRAPHICS:
(1) NVIDIA GeForce GTX 680 http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680
SOUND CARD:
NONE DEDICATED: But Onboard Creative Soundblaster X-Fi Digital Audio Processor (20K2) with X-Fi Xtreme Fidelity™ and EAX® AHD 5.0™ Technologies built into MoBo.
PLUS: NVIDIA High Definition Audio
CONTROLLERS:
Microsoft ISATAP Adapter
Intel(R) ICH10R SATA AHCI Controller
Realtek PCI GBE Family Controller
Marvell 91xx SATA 6G Controller
Renesas Electronics USB 3.0 Host Controller
MY HARD DRIVE SETUP:
*I also have a network server which I use to back up files, and access files across my other systems.

Eric,
I would hardly call the Quadro card an upgrade to a GTX 680!
Regarding getting more speed from a faster MB / CPU, since you already have a 6-core rig with 24GB of RAM I would think that any gains you would get would not be that dramatic.
Check out your cpu usage (Task manager) and see how busy your cores are during a test render. I am guessing that the Boris and / or Red Giant effects could be jumping your projects from gaining the full multi-core capabilities of the Adobe software.
Regards,
Jim

Help with 3d being disabled on Photochop CS6

Similar Messages

Maybe you are looking for