Help with "a dynamic link library initialization routine failed" error message

Hi,
I am using LabView 7.0 and I've been using it on the same machine for a while and when one day I tried launching my VI it gave me error message "a dynamic link library (DLL) initialization routine failed".
I tried different solutions that people tried but none worked for me.
Does anyone know why I would all of a sudden get this message?
I appreciate your help
Mario

Hi back Peter,
First of all, please check this link (even if according to your descrition, the install should have been done for a while). If this is not dealing with your problem, try the following -> give the user 'write' rights privileges to the directory "C:\Program Files\National Instruments\", in addition to "read", "list", and "execute" rights.
Have you tried to repair your softwares installation by going to the add/remove programs utilitie and click on repair ? This may solve the problem as well.
Hope this can help you in some way !
Regards,
Mathieu Steiner, Test System Engineer, Safran Engineering
CLD, ISTQB

Similar Messages

I need Help with the dynamic link feature in CS3

Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
Many thanks again guys.
Date: Tue, 24 Nov 2009 19:32:47 -0700
From: [email protected]
To: [email protected]
Subject: I need Help with the dynamic link feature in CS3
Harm is correct. For SD DVD, exporting as a DV AVI file from Pr will give you good results. Encore's Automatic Transcoding will give you maximum quality for the available disc space.
-Jeff
>

Help with HP d145 on Windows PC. Specific error messages. iFelix help!

My HP is connected to a windows xp system on my home network. When I try to add it to the Mac (I have enabled windows sharing on the PC), it shows up. When I try generic printingw (no d145 driver), I get this message when I try to print "Connection failed with error NTSTATUS_NOMEMORY"
At the suggestion of a few people on the g5 board, I added the d145 driver Foomatic/HPIJS and specifically added it the printer list as the hpd145. However, now I get the following error
"Unable to connect to SAMBA host, will retry in 60 seconds...foomatic-rip version $Revision 3.43.2.9"
Can anyone help me out, Thanks in advance, Jim

Hello Krish_12,
This may be a result of security software interfering with the iCloud Control Panel's ability to communicate with our servers. The following article provides information that can help correct this.
iCloud: Ensuring iCloud will work with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Allen

UnsatisfiedLinkError: A dynamic link library (DLL) initialization routine

I get this error only when building a native library with /MD on Win64.
Envrionment
Windows Server 2008 R2 (64 bit)
JDK1.6 (32 bit)
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode)
MS Visual Studio 2008
Microsoft (R) 32-bit C/C+ Optimizing Compiler Version 15.00.30729.01 for 80x86+
If I compile with "cl /O1 /EHsc /LD /IC:\Apps\Dvlp\jdk1.6.0\include /IC:\Apps\Dvlp\jdk1.6.0\include\win32 ..." then System.loadLibrary(...) succeeds.
If I compile with "cl */MD* /O1 /EHsc /LD /IC:\Apps\Dvlp\jdk1.6.0\include /IC:\Apps\Dvlp\jdk1.6.0\include\win32 ..." then System.loadLibrary(...) fails with "A dynamic link library (DLL) initialization routine failed."
After reading Microsoft's description of the /MD linker option I'm assuming this is a bitness issue but with my limited experience on Windows I'm afraid I'm stuck. Note, I must build with /MD, it's a requirement. Any suggestions on what to do next?
Edited by: user709182 on Nov 16, 2011 2:55 PM

MichaelT wrote:
By the way, building with /MD is requirement imposed by 3rd party libraries I depend upon so removing it is not an option.An alternative still exists. Do not use JNI. Instead
1. Wrap the target native code in an executable.
2. Add a communication api.
3. Test and debug as the executable.
4. Run the executable via Runtime.exec/ProcessBuilder
5. Execute the functionality via the communication api.
No JNI in the above. Also no possibility that the native code can crash your VM. Even if the exe crashes you can add restart code to deal with it.

SQORA32 driver could not be loaded. System error 1114: A dynamic link library (DLL) initialization routine failed

I have an MS Access 2013 application that opens a connection to an Oracle database via an Oracle client.
On occasion the application returns the following error when the ODBC connection is opened:
Specified driver could not be loaded due to system error
1114: A dynamic link library (DLL) initialization routine failed. (Oracle in OraClient11g_home1, C:\oracle\product\11.2.0\client_1\SQORA32.DLL).
This is an intermittent problem that is reproducible on several workstations (all running Windows 7 x64 with 32-bit version of Office 2013 and 32-bit Oracle client 11.2.0).
Many times the ODBC connection is established without a problem
Other times the connection can be established by closing then re-opening the application once
Other times closing the re-opening the application several times does not help
The same application is being run on several workstations and not every user experience the problem at the same time. The problem may be chronic for one user whereas another user experiences no problem whatsoever.
All of the posts I have seen concerning this issue are for a persistent problem opening a connection and not an intermittent one. I am at a loss of how to diagnose this problem and would appreciate some direction.

Hi Ross,
This error message is Microsoft Data Link Error, this error occurs on windows when attempting to start a service or load a system driver but the DLL you loaded or one of its dependencies returned FALSE. It typically point to a system DLL file which is located
in system32 and can be fixed by using the System File Checker tool. In your case, I suspect that it occurs due to a calling failure connecting to ODBC driver and it pointed to an error link C:\oracle\product\11.2.0\client_1\SQORA32.DLL which is hosted by oracle.
If they are analogous, a “repair” seems to be helpful, However since we are not expert about oracle program I‘d suggest you check if C:\app\Oracle\BIN\SQORA32.DLL file exists on your machine and contact with Oracle first, I think there you can get more effective
suggestion by other experts who familiar with design of Oracle database. Your understanding is highly appreciated.
By the way, I searched for you and seems like you are not alone about this issue.
https://community.oracle.com/thread/2301119
https://communities.sas.com/message/118002
http://forums.networkautomation.com/forum/messageview.cfm?catid=50&threadid=11611
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAPJCo problem -- Could not initialize dynamic link library sapjcorfc

Hi there,
I have a J2EE application running on Websphere Application Server ND V6.1 (on MS Windows Server, Enterprise Edition with
SP2). J2EE application need to communicate to SAP on P560 z/OS via SAP Java Connector (SAP JCo). As per instructions given by
SAP JCo, I have created a folder and extracted SAPJCo zip to that, and also copied librfc32.dll & sapjcorfc.dll to
C:\Windows\system32 folder and created the shared libraries at the Application server level on Websphere to point to the
sapjco.jar file.
Now when I start my J2EE Application on Webpshere, I get hte error which is under the dashed line. The main complaint is.....
<b>java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer
'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [D:\Software\SAPJCo\sapjcorfc.dll (JVMPORT015E Unable
to resolve DLL references - a prerequisite DLL may be missing)].</b>
Please let me know if any one has experienced similar problems. As we have a milestone to present this in a very short time,
I appreciate if any one could help me out as soon as possible.
==========================================================================================================================
Cannot resolve reference to bean 'sapConnector' while setting bean property 'sapConnector'; nested exception is
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'sapConnector' defined in class path
resource [sapInterfaceContext.xml]: Instantiation of bean failed; nested exception is
org.springframework.beans.BeanInstantiationException: Could not instantiate bean class
[au.com.allianz.fsi.journal.sap.SapConnector]: Constructor threw exception; nested exception is
java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer
'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [D:\Software\SAPJCo\sapjcorfc.dll (JVMPORT015E Unable
to resolve DLL references - a prerequisite DLL may be missing)]. java.library.path
[D:\WebSphere61\AppServer\java\jre\bin;.;D:\WebSphere61\AppServer\bin;D:\WebSphere61\AppServer\java\bin;D:\WebSphere61\AppSer
ver\java\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Software\SAPJCo;D:\WebSphere61\AppServer\lib\WMQ\
java\lib]
     at
org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
     at
org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.jav
a:109)
     at
org.springframework.beans.factory.support.ConstructorResolver.resolveConstructorArguments(ConstructorResolver.java:381)
     at org.springframework.beans.factory.support.ConstructorResolver.autowireConstructor(ConstructorResolver.java:120)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.autowireConstructor(AbstractAutowireCapableBeanF
actory.java:781)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFa
ctory.java:699)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.ja
va:386)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:255)
     at
org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:156)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:252)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at
org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java
:287)
     at
org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.jav
a:689)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:358)
     at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:244)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:187)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:49)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.notifyServletContextCreated(WebApp.java:635)
     at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:279)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:283)
     at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:88)
     at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:655)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:608)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1312)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1129)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:814)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:965)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:2131)
     at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.java:341)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Regards
Satish

Hi,
The following error is id due to the following cause :
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' default_cpc_mode at com.sap.mw.jco.JCO.<clinit>(JCO.java:309)
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:devcu rrjcosapjcorfc.dll]. Required version "2.1.5 (2005-02-15)". at com.sap.mw.jco.JCO.<clinit>(JCO.java:735)
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc. Found version "2.0.11 (2005-01-21)" but required version "2.1.5 (2005-02-15)". at com.sap.mw.jco.JCO.<clinit>(JCO.java:735)
Cause: These exceptions typically occur when different versions of sapjcorfc.dll and sapjco.jar have been installed. Anytime the JCo connector is upgraded to a new version, you need to ensure that all three libraries are updated (librfc32.dll, sapjcorfc.dll, and sapjco.jar). If any are left at the older version, one of the above exceptions is likely to occur.
Resolution: Extract sapjcorfc.dll and sapjco.jar from the original JCo archive. Copy these files to the appropriate locations, overwriting the originally installed versions. Ensure that the PATH statement is updated to reflect the directory location of the DLL files and the Java CLASSPATH points to sapjco.jar.
U can use the following link to solve any problem associating JCO :
http://searchsap.techtarget.com/general/0,295582,sid21_gci1096472,00.html
Please reward with points if the answer is helpful.
Thanks
ritu

Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
Michelle

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I tried to uninstall itunes and appropriate apple products on my computer. It will not let me uninstall message I keep getting is"THE PROCEDURE ENTRY POINT_OBJC_INIT_IMAGE COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY OBJ.DLL. CAN ANYONE HELP?

I tried to update Itunes on my desktop computer and for some reason it did not work properly. I am receiving the following message:
"the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll. can you help?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

11.2 iTunes update has made me unable to open iTunes. It says "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" I have done everything imaginable! Please help?!

I deleted, reinstalled, searched, enabled, disabled--EVERYTHING and yet iTunes will not open! This is exactly why I hate updates rom Apple because they do this time and time again. I deleted multiple .dll files and nothing has worked. This is a glitch from the newest update 11.2. It says: "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" and I have no idea what the heck that means!
If there is anybody that is having similar issues and know of what the issue might be, please help =[
Thanks.

Hi, Did you strip out all components, delete the named folders and reboot as in the second box of Troubleshooting issues with iTunes for Windows updates?
Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
Size 3,004 KB
Created 8th May 2014
Modified 8th May 2014
File Version 1.0.0.1
Product Version 1.0.0.1
I'll try to get a look at 64-bit system later to confirm the correct path.
tt2

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why do we get "Failure to initialize dynamic link library nipalu.dll"?

We have two laptops connected by Ethernet. Each sees the other as a normal drive.
Laptop A has the NI DAQ drivers and Visual C++ installed. It is our development environment. Laptop B has the PCMCIA DAQCard 6533 installed in the PCMCIA port.
The DAQ application is stored on Laptop A, but launched, via shortcut, on laptop B. The application launches fine on laptop A (but this is of no use, obviously).
I have tried installing the NI-DAQ drivers on Laptop B, but I get the same problem...
Failure to initialize dynamic link library nipalu.dll
THANKS!

Azucena,
Thank you for your comments. Three questions come to mind:
1)If I must install NI-DAQ (do you mean just the dll or the entire environment?) on both machines, what are the licensing issues? Note that I only use one for development.
2)Why do you say NI-DAQ needs to be installed on both machines? I launch my application on my remote machine using a shortcut pointing to the application where it resides on the _development_ machine. My app should therefore be able to see all required files (dlls, etc.) on the development machine even though it is running on the remote machine. To the remote machine the development machine merely looks like a normal drive.
3) I don't see how the patch can help; Since I'm running my app on the remote
machine (which doesn't have Visual C++ installed) it won't see any Visuall C++ modules in memory because they reside in memory (when they're there) on the development machine. Plus, when I do run this app on the development machine, it runs fine!
Thanks very much!
Les

AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll. I have deleted and rein-staled 5 times, but getting same message..........HELP!!!!!!!!!!!!!!!!!!!PLEASE!!!!!!!!!!!!!!!!!!!!!!!

Hello,
         I dumped Itunes and QuikTime, tried to reload ( 4 Times) but keep getting the same error message.
                      ENTRY POINT NOT FOUND
      The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
                       HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!           PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi, Did you strip out all components, delete the named folders and reboot as in the second box of Troubleshooting issues with iTunes for Windows updates?
Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
Size 3,004 KB
Created 8th May 2014
Modified 8th May 2014
File Version 1.0.0.1
Product Version 1.0.0.1
I'll try to get a look at 64-bit system later to confirm the correct path.
tt2

Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Help with "a dynamic link library initialization routine failed" error message

Similar Messages

Maybe you are looking for