I tried to uninstall itunes and appropriate apple products on my computer. It will not let me uninstall message I keep getting is"THE PROCEDURE ENTRY POINT_OBJC_INIT_IMAGE COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY OBJ.DLL. CAN ANYONE HELP?
I tried to update Itunes on my desktop computer and for some reason it did not work properly. I am receiving the following message:
"the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll. can you help?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Similar Messages
-
received error message - the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. unable to launch iCloud. Any suggections?
I had roughly the same error. I fixed it by running the iCloud control panel update from apple software update. The problem cropped up after I ran the most recent iTunes update, I've personally been having issues with iTunes updates being finicky since upgrading to Windows 8.1, I've had to download installers rather than running the update directly through Software Update, so it's possible Apple is not fully addressing compatibility issues for newer versions of Windows. Ultimately it seems to be a missing file issue, so any update, installer, or install verification/repair that directly addresses the iCloud files should see and replace the missing file.
Also it looks like Apple is either unaware of this problem or not addressing it at all, there are about a dozen support requests from within the last month all asking this same question regarding iCloud, just with different specific files unable to be found. None of them have answers.
Hopefully this works for you -
The procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll
Please can you explain what this is the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll
I am having the same problem.
There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates. This is supposes to open a windown with Iclould and itunes update but that did not work for me!
I am continuing to search the Community Support area. -
the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. How do I fix?
I am having the same problem.
There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates. This is supposes to open a windown with Iclould and itunes update but that did not work for me!
I am continuing to search the Community Support area. -
I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....
i ahve same problem
-
The procedure entry point_objc_init_image could not be located in the dynamic link
Help please!!!
Welcome,
See: https://discussions.apple.com/message/24993884#24993884
May not help as it was for iCloud but may be related!
Regards,
Shawn -
Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2 -
my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll" then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them? will this delete everythin in the itunes account? please help
This might help https://discussions.apple.com/thread/5821701
-
I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
"itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
Anyone have a solution?This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Apple Application Support
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
tt2 -
When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!
You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
The detailed file properties should be as shown.
If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
tt2 -
when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
== This happened ==
Every time Firefox opened
== start mozila firefoxThis issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674] -
Hi,
After Installing the trial version of dreamweaver I am getting error message as "The Procedure entry point AMTRetrieveLibraryPath couldnot be located in the dynamic link library C:\Program Files\Adobe\Adove Dreamweaver CC 2014.1\Dreamweave.exe
How to solve this error,
Sopesh NathThere are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The first box outlines the fix I suggested back in January. For some people it is all they need to do.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
The Procedure entry point Could not be located in the dynamic Link Library
I have recently received an error message that starts out with "The Procedure entry point XXX Could not be located in the dynamic Link Library" and then I get an Error 7 (Windows error 127). iTunes will not start. I have uninstalled all Apple programs and then re-installed them. Still no luck. I am running Windows 8.1. I have tried systen restore too but with no luck.
Any solutions or suggestions. This only started this evening when I tried to open iTunes!There are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The first box outlines the fix I suggested back in January. For some people it is all they need to do.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Having problem with printing from xp to mac shared printer (HP LJ M1005).
I have 2 printers - HP LaserJet M1005 MFP, HP DeskJet 3845. Both are connected via USB to MacPro and shared. I have 3 laptops - MacBookPro, IBM ThinkPad T42 (winxp) and HP Compaq nw8000 (winxp). All these computers are connected via router. I'm able
-
Maybe someone here can give me some pointers. I bought "The Incredibles" in HD from the iTunes store, but the HD file won't completely download. Most common occurrence: It loads up to about 780 MB, then jumps around a bit in downloaded size, then sta
-
Hi all, i found a nice vista-style toolbar on the net and want to implement it in apex. but unfortunately it does not load the images specified in css file here´s what i´d like to do: [http://apex.oracle.com/pls/otn/f?p=200801:2012:586436219181608::N
-
MacBook Air dongle compatibility
First post newbie. For my 50th birthday I'm being treated to new 13" MacBook Air/256GB/8GB, I currently use a 2013 iPad, with 3G SIM from Network 3, and now wondering which mobile broadband MIFI or Dongle would be best to provide internet connection
-
Hi All, This one's got me. I have the following requirement in my app: - Ability to browse for, and save files to the database. - View (and modify if required) saved files using the default external application. - When the default external applicatio