Help with a simple task
Hi, I'm quite new to AS so this is actually quite simple but
is something I've yet to figure out.
My flash movie comprises of several sections, and all these
can be accessed from the main menu. Right now, what I'm doing is to
preload all the sections at once before starting the clip. However,
as more sections are added on, I found that it takes longer and
longer to preload. Therefore, I wish to preload just the main menu
first. Only after the user selects the section he wanted to enter
will that section be loaded. I understand this is what a lot of
websites are doing now but I'm still trying to understand the
mechanics...greatly appreciated for any help rendered!
Hi, thanks for the help, I worked it out to be something like
this:
this.onRelease= function(){
loadMovieNum(section2.swf, 0)
My site works in such a way that there're many big buttons on
the main page, and clicking on them leads to a sub-section which
will replace the main page. Using the loadMovieNum() function
works, but how do I access some of the variables that I declared on
the main clip? For example, I've got a soundvol variable that I
want to decrease as I load section2.swf...this is to fade out the
background music of the main clip...thanks for any help!
Similar Messages
-
I need help with a simple task (PLEASE HELP)
hi, you know how you can make a button and link it to a
different site with the actionscript in this program? well I need
to know of a way like...to make a button and...link it to the next
frame. ok, heres what im trying to make happen...the user presses a
button in the flash program thing and a comment apperars. then they
press it another time and a new one come up...and so on...I could
make like 50 different frames with new comments on them and then
make the button on each frame link to the next frame. is there a
way to do that? if there is I REALLY need your help. please
thanks :)no need to modify anything - look at the first code:
on (release) {
nextFrame();
that's all you need on the button.
If you want it to happen on click and not release:
on (press) {
nextFrame();
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
mybluehair wrote:
> thank you so much. this will really help me. and, is
there any way I can modify
> that script so that its when the mouse is click, and not
the arrow keys?
>
>
>
>
quote:
Originally posted by:
Newsgroup User
> on (release) {
> nextFrame();
> }
>
> from the help docs (F1):
>
> nextFrame function
> nextFrame() : Void
>
> Sends the playhead to the next frame.
>
> Availability: ActionScript 1.0; Flash Player 2
>
> Example
> In the following example, when the user presses the
Right or Down arrow key,
> the playhead goes to
> the next frame and stops. If the user presses the Left
or Up arrow key, the
> playhead goes to the
> previous frame and stops. The listener is initialized to
wait for the arrow
> key to be pressed, and
> the init variable is used to prevent the listener from
being redefined if the
> playhead returns to
> Frame 1.
>
> stop();
>
> if (init == undefined) {
> someListener = new Object();
> someListener.onKeyDown = function() {
> if (Key.isDown(Key.LEFT) || Key.isDown(Key.UP)) {
> _level0.prevFrame();
> } else if (Key.isDown(Key.RIGHT) ||
Key.isDown(Key.DOWN)) {
> _level0.nextFrame();
> }
> };
> Key.addListener(someListener);
> init = 1;
> }
>
>
>
> ******************************************
> --> **Adobe Certified Expert**
> --> www.mudbubble.com
> --> www.keyframer.com
>
>
>
>
> mybluehair wrote:
> > hi, you know how you can make a button and link it
to a different site with
> the
> > actionscript in this program? well I need to know
of a way like...to make a
> > button and...link it to the next frame. ok, heres
what im trying to make
> > happen...the user presses a button in the flash
program thing and a comment
> > apperars. then they press it another time and a new
one come up...and so
> on...I
> > could make like 50 different frames with new
comments on them and then make
> the
> > button on each frame link to the next frame. is
there a way to do that? if
> > there is I REALLY need your help. please
> >
> > thanks :)
> >
>
>
>
> -
I have just started with Flash and am very unfamiliar with
the workings of it..On my web site I have a small Flash application
that I want to also be a hyperlink to another page. But I can't
figure this out. I actually want the application to be the link and
not anything inside the application. I am including the code. Can
someone tell me what I need to do?? Thanks.You can just place an invisible button on the top layer of
the flash time line and code it to getURL. When you said "hyperlink
to another page", are you referring to an html page or another swf
file? To make an invisible button in Flash, you can hit Ctrl+F8 to
bring up the dialog box to create a new symbol, name your button,
make sure you select the type of button, hit ok, now you are inside
the button and need to create a "hit" area. Click on the "hit"
state and press F7 to create a blank key frame. Using the drawing
tools, select the square, no stroke, and any fill color you want,
draw a square shape, click on the shape and in your Info Panel,
change the size of this shape to match the size of your stage,
lastly, make sure the registration point is (0,0) by using the
Align Panel. Go back to your main time line, add a layer on your
time line and make sure it's at the top, drag your new button from
the library to the stage and align it to (0,0).
There are two ways to code the button, so to make it easier,
click on the button once to select it, hit F9 to bring up the
actions panel and type this
on(release){
getURL("
http://www.someWebsite.com",
"_blank");// you can also use "_self" //
If some of this isn't new to you, disregard parts of it. If
you have any buttons in your Flash application, this will cause
problems because the invisible button will counter-act anything
below it. Let me know if this works for you. Of course, this all
assumes you have access to the flash file. -
Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence
Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608) -
I have a MacBook Pro 15" (mid 2009) I recently needed to get a new hard drive for it, the old one stopped working. It came with OS X Snow Leopard already installed from Apple, and it also came with the install disks. I have booted up using the install disks and put OS X Snow Leopard back on the computer.
I tried booting with a USB install disk of OS X Lion (10.7) but had no luck on multiple occasions. It would only get through the initial step of the install and then say it couldn't download additional components needed for OS X
So finally, I decided to try a full erase and reformat of my brand new hard drive (less than a week old) and stated with the basic software that came with the computer. Installing that worked fine, until I tried to do a software update through the built in program. My computer refused to download 10.6.8 from the apple servers, so I had to find it on a 3rd party website. Once I found it and downloaded it, I finally got it installed. There were 12 more updates after I did 10.6.8 and none of them worked when I tried downloading and installing as a group. I had to do each one individually, the last one being a security update.
Up to this point, the Mac App Store didn't work (even after the 10.6.8 update), I couldn't download any of my previous purchases. I needed to download lion, to see if having it on the Mac hard drive itself would help with the install, but I couldn't do that until after the security update.
Other than that, the Mac worked normally except for during each start up, the apple logo would flash along with the forbidden sign and the folder with a question mark on it. It flashed for a few seconds randomly, then would boot up normally or say that my computer would need to be restarted.i figured this issue would be fixed after I successfully installed lion.
FINALLY I got the App Store to download lion, and began the install process. Halfway through the install, it failed and when I tried to restart the computer, it continuously flashes through those three symbols at startup. I can't get it to do anything else. I'm so ****** off I'm ready to just sell it for parts.
My questions are:
1. Can I install OS X Lion OR OS X Mountain Lion clean from the start after a full format of the hard drive?
2. How do I go about installing clean and get my computer to stop flashing those symbols during start up?
*I have performed the Apple Hardware extended test and all systems are reporting normal function*Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =) -
Need help with a simple process with FTP Adapter and File Adapter
I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jaypersiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Need help with a simple basketball game.
Hi im new here and I need help with making this simple basketball game.
Im trying to recreate this game from this video. Im not sure if he is using as2 or as3
Or if anyone could help me make a game like this or direct me to a link on how to do it It would be greatly appreciated.If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.
-
Need help with a simple program (should be simple anyway)
I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
public void actionPerformed(ActionEvent evt) {
text1.setText(" ");
text2.setText("RE: ");
text3.setText(" ");
public Message() {
super("Write a Message - by Kieran Hannigan");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(370,270);
FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
setLayout(flo);
//Make the bar
JMenuBar bar = new JMenuBar();
//Make "File" on Menu
JMenu File = new JMenu("File");
JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
JMenuItem f2 = new JMenuItem("Open");
JMenuItem f3 = new JMenuItem("Save");
JMenuItem f4 = new JMenuItem("Save As");
JMenuItem f5 = new JMenuItem("Exit");
File.add(f1);
File.add(f2);
File.add(f3);
File.add(f4);
File.add(f5);
bar.add(File);
//Make "Edit" on menu
JMenu Edit = new JMenu("Edit");
JMenuItem e1 = new JMenuItem("Cut");
JMenuItem e2 = new JMenuItem("Paste");
JMenuItem e3 = new JMenuItem("Copy");
JMenuItem e4 = new JMenuItem("Repeat");
JMenuItem e5 = new JMenuItem("Undo");
Edit.add(e5);
Edit.add(e4);
Edit.add(e1);
Edit.add(e3);
Edit.add(e2);
bar.add(Edit);
//Make "View" on menu
JMenu View = new JMenu("View");
JMenuItem v1 = new JMenuItem("Bold");
JMenuItem v2 = new JMenuItem("Italic");
JMenuItem v3 = new JMenuItem("Normal");
JMenuItem v4 = new JMenuItem("Bold-Italic");
View.add(v1);
View.add(v2);
View.add(v3);
View.addSeparator();
View.add(v4);
bar.add(View);
//Make "Help" on menu
JMenu Help = new JMenu("Help");
JMenuItem h1 = new JMenuItem("Help Online");
JMenuItem h2 = new JMenuItem("E-mail Programmer");
Help.add(h1);
Help.add(h2);
bar.add(Help);
setJMenuBar(bar);
//Make Contents of window.
//Make "Subject" text field
JPanel row2 = new JPanel();
JLabel sublabel = new JLabel("Subject:");
row2.add(sublabel);
JTextField text2 = new JTextField("RE:",24);
row2.add(text2);
//Make "To" text field
JPanel row1 = new JPanel();
JLabel tolabel = new JLabel("To:");
row1.add(tolabel);
JTextField text1 = new JTextField(24);
row1.add(text1);
//Make "Message" text area
JPanel row3 = new JPanel();
JLabel Meslabel = new JLabel("Message:");
row3.add(Meslabel);
JTextArea text3 = new JTextArea(6,22);
messagearea.setLineWrap(true);
messagearea.setWrapStyleWord(true);
JScrollPane scroll = new JScrollPane(text3,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//SpaceLine
JPanel spaceline = new JPanel();
JLabel spacer = new JLabel(" ");
spaceline.add(spacer);
row3.add(scroll);
add(row1);
add(row2);
add(spaceline);
add(spaceline);
add(row3);
setVisible(true);
public static void main(String[] arguments) {
Message Message = new Message();
}persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Help with a simple program.
I need some help writing a simple program. Can anybody help??
thanks to all.
2. HTML Java Source Code Reserved Word Highlighter
Write a program that inputs a Java source code file and outputs a copy of that file with Java keywords surrounded with HTML tags for bold type. For example this input:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");
will be transformed into:
<B>public</B> <B>class</B> JavaSource
<B>public</B> <B>static</B> <B>void</B> main ( String[] args )
<B>if</B> ( args.length == 3 )
<B>new</B> BigObject();
<B>else</B>
System.out.println("Too few arguments.");
In a browser the code will look like this:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");Here is something that may get you started...
import java.io.*;
import java.util.*;
public class HtmlJava{
public static void main(String arg[]){
if(arg.length!=1){
System.out.println("Usage java HtmlJava sourceFile");
else
new HtmlJava(arg[0]);
HtmlJava(String source){
try{
BufferedReader sourceReader=new BufferedReader(new InputStreamReader(new FileInputStream(source)));
BufferedWriter writer=new BufferedWriter(new OutputStreamWriter(new FileOutputStream(source+"Html.txt")));
Vector keywords=new Vector();
addKeywords(keywords);
String line;
StringTokenizer tokenizer=null;
String word;
while((line=sourceReader.readLine () )!=null){
tokenizer=new StringTokenizer(line);
while(tokenizer.hasMoreTokens()){
word=tokenizer.nextToken();
if(keywords.contains(word)){
writer.write(""+word+" ");
else{
writer.write(word+" ");
writer.write("\r\n");
writer.close();
sourceReader.close();
System.out.println("Output File written to "+source+"Html.txt");
catch(Exception ex){
ex.printStackTrace();
private void addKeywords(Vector keywords){
keywords.addElement ( "abstract");
keywords.addElement( "boolean");
keywords.addElement( "break");
keywords.addElement( "byte");
keywords.addElement( "byvalue");
keywords.addElement( "case");
keywords.addElement( "cast");
keywords.addElement( "catch");
keywords.addElement( "char");
keywords.addElement( "class");
keywords.addElement( "const");
keywords.addElement( "continue");
keywords.addElement( "default");
keywords.addElement( "do");
keywords.addElement( "double");
keywords.addElement( "else");
keywords.addElement( "extends");
keywords.addElement( "false");
keywords.addElement( "final");
keywords.addElement( "finally");
keywords.addElement( "float");
keywords.addElement( "for");
keywords.addElement( "future");
keywords.addElement( "generic");
keywords.addElement( "goto");
keywords.addElement( "if");
keywords.addElement( "implements");
keywords.addElement( "import");
keywords.addElement( "inner");
keywords.addElement( "instanceof");
keywords.addElement( "int");
keywords.addElement( "interface");
keywords.addElement( "long");
keywords.addElement( "native");
keywords.addElement( "new");
keywords.addElement( "null");
keywords.addElement( "operator");
keywords.addElement( "outer");
keywords.addElement( "package");
keywords.addElement( "private");
keywords.addElement( "protected");
keywords.addElement( "public");
keywords.addElement( "rest");
keywords.addElement( "return");
keywords.addElement( "short");
keywords.addElement( "static");
keywords.addElement( "super");
keywords.addElement( "switch");
keywords.addElement( "synchronized");
keywords.addElement( "this");
keywords.addElement( "throw");
keywords.addElement( "throws");
keywords.addElement( "transient");
keywords.addElement( "true");
keywords.addElement( "try");
keywords.addElement( "var");
keywords.addElement( "void");
keywords.addElement( "volatile");
keywords.addElement( "while");
}Hope it helped -
Help with a simple 1811 configuration
I have a very basic level of understanding with Cisco products and I need help with what should be simple and even doable by me.
I have a Cisco 1811 integrated router and am simply trying to use it on my home network. I can configure the router with an enable secret password, password encryption, VTY, aux, and cons logins with no issues. The router has 2 Ethernet interfaces, 0 and 1 and 8 switch ports.
The idea is to bring Comcast ISP service into one of the Ethernet ports and then have three machines on the switch ports able to access the Internet. Also I have an off-the shelf wireless router that I thought I would just plug that into an available switch port and allow a wireless AP as well.
This is so simply, that I can't believe I can't figure it out, but I can't.
I set int F1 to DHCP, performed a 'no shut', and connected the ISP's router and have an up and up indication. I have setup a static network with my three machines on the switch ports and enabled all applicable ports and have up and up indications - however, no traffic flow, even amongst my static Layer 2 switched LAN - not even a 'ping'. By my understanding of Layer 2, this should work right now, whether the ISP service is working or not - WHAT AM I DOING WRONG?
The addressing scheme I have ended up on is 172.16.1.0/28
Obviously without the first hurdle cleared, of why the switched LAN doesn’t work, I haven't got any deeper. Do I need to configure NAT? I don't think I would need to in the scenario right?
All of my experience, and none at the CCNA level, has been with larger Cisco equipment. One thing I noticed on the 1811 was that when trying to create a new VLAN, it appears to work yet does not do anything and the 'sh vlans' output returns nothing, not even the VLAN1 I can see with 'sh ip int brief".
Anyway, if anyone has time to help a newbie out I would appreciate it; I’m lost.
Thanks,
JoshThanks for the help Andrew! You know, I think if this was two separate devices (switch and router) I think I would be up and running, but this integrated stuff is throwing me off, not to mention that the IOS is a much older version (I guess) than what I'm used to.
They were throwing this 1811 in the trash can at work, so I just emptied the trash can. I have no documentation at all but I have since found the 1800 series documentation on Cisco.com and have tried to implement the basic configurations cited; with what seems like success, but still no joy. I did have to recover the password and did so with 0x2142, I bypassed the setup and compared the default configuration with what is listed in the documentation and they DO NOT match; I also tried to go through setup mode with the same indications. Additionally I've also learned that the 1800 series is pre-configured on certain options (DHCP, VLAN), which is new to me - I thought Cisco routers were not configured by default - isn't that kind of the point? (By the way, the below port status may not be correct since I now have all the ports unplugged)
Anyway, here is the 'show run' command, the 'sh ip int brief' command, followed by the 'sh version' command:
Show Run
Casino#sh run
Building configuration...
Current configuration : 2006 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Casino
boot-start-marker
boot-end-marker
enable secret 5 $1$meWw$nsMTp6US7axi/uE0MWULK.
enable password 7 06535E741C1B584C55
no aaa new-model
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 172.16.1.1
ip dhcp pool Casino
import all
network 172.16.1.0 255.255.255.240
default-router 67.165.208.1
dns-server 68.87.89.150
domain-name hsd1.co.comcast.net
no ip domain lookup
ip domain name GinRummy.localhost
ip name-server 68.87.85.102
ip name-server 68.87.69.150
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
archive
log config
hidekeys
interface Loopback0
ip address 172.16.1.1 255.255.255.240
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet1
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer pool 1
ppp authentication chap
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat pool Casino 172.16.1.2 172.16.1.14 netmask 255.255.255.240
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit 172.16.1.0 0.0.0.15
dialer-list 1 protocol ip permit
control-plane
line con 0
password 7 080E5916584B4442435E5C
login
line aux 0
password 7 013C135C0A59475A70191E
login
line vty 0 4
password 7 09635B51485756475A5954
login
end
Show IP Interface Brief
Casino#sh ip int brief
Interface IP-Address OK? Method Status Prl
FastEthernet0 unassigned YES NVRAM administratively down do
FastEthernet1 unassigned YES DHCP up do
BRI0 unassigned YES NVRAM administratively down do
BRI0:1 unassigned YES unset administratively down do
BRI0:2 unassigned YES unset administratively down do
FastEthernet2 unassigned YES unset up do
FastEthernet3 unassigned YES unset up do
FastEthernet4 unassigned YES unset up do
FastEthernet5 unassigned YES unset up do
FastEthernet6 unassigned YES unset up do
FastEthernet7 unassigned YES unset up do
FastEthernet8 unassigned YES unset up do
FastEthernet9 unassigned YES unset up up
Vlan1 unassigned YES NVRAM up up
Loopback0 172.16.1.1 YES manual up up
Dialer0 unassigned YES manual up up
NVI0
'show version'
Casino#sh ver
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15))
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 13:05 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)
Casino uptime is 52 minutes
System returned to ROM by reload at 17:09:25 UTC Fri Jul 1 2011
System image file is "flash:c181x-advipservicesk9-mz.124-15.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1812 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m.
Processor board ID FHK120622J3, with hardware revision 0000
10 FastEthernet interfaces
1 ISDN Basic Rate interface
31488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Thanks again for your help,
Josh -
Hello
I am very new to Java and am currently studying a course in the language.
I am working through a tutorial at the moment and a question has been asked and I am struggling a bit
I have been given the code to a program that creates a window with a ball bouncing around inside the window.
There are 2 classes (code below) - Call class - this contains all the code need to create the ball and BallWorld Class (the main Class) this create the window and moves the ball, it also detects if the ball hits the edge of the window, whne this happens it redirects the ball. I understand how all this code works
I have been asked the following:-
Rather than testing whether or not the ball has hit the wall in the nmain program, we could use inhertitance to provide a specialized forom of Ball. Create a class BoundedBall that inherits from the class Ball. The constructor for this class should provide the height and width of the window, which should be maintained as data fields in the class, rewrite the move method so that the ball moves outside the bound, it automatically reflects its direction. Finally rewrite the BallWorld class to use an instance of BoundedBall rather than ordianary Ball, and elimiante the bounds test in the main program.
I am having trouble with this and I can not get my code to work, I think I may be going in completly the wrong direction with the code can sombody please provide me with a simple working code for both the BoundedBall and ammended BallWorld class, as this will help me understand whare I am going wrong
Ball class
//a generic round colored object that moves
import java.awt.*;
public class Ball {
public Ball (Point lc, int r) { //constructor for new ball
//ball centre at point loc, radius rad
loc = lc;
rad = r;
protected Point loc; //position in window
protected int rad; //radius of ball
protected double changeInX = 0.0; //horizontal change in ball position in one cycle
protected double changeInY = 0.0; //vertical change in ball position in one cycle
protected Color color = Color.blue; //colour of ball
//methods that set attributes of ball
public void setColor(Color newColor) {color = newColor;}
public void setMotion(double dx,double dy)
{changeInX = dx; changeInY = dy;}
//methods that access attributes of ball
public int radius() {return rad;}
public Point location() {return loc;}
//methods to reverse motion of the ball
public void reflectVert(){ changeInY = -changeInY; }
public void reflectHorz(){ changeInX = -changeInX; }
//methods to move the ball
public void moveTo(int x, int y) {loc.move(x,y);}
public void move(){loc.translate((int)changeInX, (int)changeInY);}
//method to display ball
public void paint (Graphics g) {
g.setColor(color);
g.fillOval(loc.x-rad, loc.y-rad, 2*rad, 2*rad);
BallWorld class
//A bouncing ball animation
import java.awt.*; //import the awt package
import javax.swing.JFrame; //import the JFrame class from the swing package
public class BallWorld extends JFrame{
public static void main (String [] args){
BallWorld world = new BallWorld(Color.red);
world.show();
for(int i = 0; i < 1000; i++) world.run();
System.exit(0);
public static final int FrameWidth = 600;
public static final int FrameHeight = 400;
private Ball aBall = new Ball(new Point (50,50),20);
private BallWorld(Color ballColor) { //constructor for new window
//resize frame, initialize title
setSize(FrameWidth, FrameHeight);
setTitle("Ball World");
//set colour and motion of ball
aBall.setColor(ballColor);
aBall.setMotion(3.0, 6.0);
public void paint (Graphics g) {
//first draw the ball
super.paint(g);
aBall.paint(g);
public void run(){
//move ball slightly
aBall.move();
Point pos =aBall.location();
if ((pos.x < aBall.radius()) ||
(pos.x > FrameWidth - aBall.radius()))
aBall.reflectHorz();
if ((pos.y < aBall.radius()) ||
(pos.y > FrameHeight - aBall.radius()))
aBall.reflectVert();
repaint();
try{
Thread.sleep(50);
} catch(InterruptedException e) {System.exit(0);}Here - you can study this :0))import java.awt.*;
import javax.swing.*;
public class MovingBall extends JFrame {
mapPanel map = new mapPanel();
public MovingBall() {
setBounds(10,10,400,300);
setContentPane(map);
public class mapPanel extends JPanel {
Ball ball = new Ball(this);
public void paintComponent(Graphics g) {
super.paintComponent(g);
ball.paint(g);
public class Ball extends Thread {
mapPanel map;
int x = 200, y = 20, xi = 1, yi = 1;
public Ball(mapPanel m) {
map = m;
start();
public synchronized void run(){
while (true) {
try{
sleep(10);
catch(InterruptedException i){
System.out.print("Interrupted: ");
move();
public void move() {
map.repaint(x-1,y-1,22,22);
if (x > map.getWidth()-20 || x < 0) xi = xi*-1;
if (y > map.getHeight()-20 || y < 0) yi = yi*-1;
x = x + xi;
y = y + yi;
map.repaint(x-1,y-1,22,22);
public void paint(Graphics g) {
Graphics2D g2 = (Graphics2D)g;
g2.setColor(Color.red);
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.fillOval(x,y,20,20);
g2.dispose();
public static void main(String[] args) {
new MovingBall().show();
} -
Can someone help with this simple application
I am taking my first java class and there are limited resourses for the class as far as getting help with coding.
Any hoo if any one can point me in the correct direction from the following information listed below I would be greatfull. I am trying to use the set and get methods on the instance veriables and then I am goign to post the results once I get them workign to a JOption pane window.
examples are most welcome thanks
// Invoice.java
// Homework assignment 3.13
// Student Arthur Clark
public class Invoice // public class
String partNumber;// instance veriable quantity
String partDescription;// instance verialbe partDescription
//constructors
public void setpartNumber( String number, String description )
partNumber = number; //initalize quantity
partDescription = description; // initalize partDescription
}// end constructors
//method getpartNumber
public String getpartNumber()
return partNumber;
}//end method getpartNumber
public String getpartDescription()
return partDescription;
}// end method getpartDescription
public void displayMessage()
//this is the statement that calls getpartNumber
System.out.printf(" part number # \n%s!\n the description", getpartNumber(), getpartDescription() );
} // method displaMessage
}// end method main
// Fig. 3.14 InvoiceTest.java
// Careate and manipulate an account object
import java.util.Scanner;
import javax.swing.JOptionPane;//import JOptionPane
public class InvoiceTest{
// main method begins the exciution of the program
public static void main ( String args [] )
// create Scanner to obtain input from mommand window
Scanner input = new Scanner ( System.in );
// create a Invoice object and assig it to mymethod
Invoice myMethod = new Invoice();
Invoice myMethod2 = new Invoice();
// display inital value of partName, partDescriptoin
System.out.printf( "inital partname is %s\n\n", myMethod.getpartNumber() );
// prompt for and read part name, partDescription
System.out.println( "please enter the Part Number:" );
String theNumber = input.nextLine(); // read a line of text
myMethod.setpartNumber( theNumber ); // set the part name with in the parens
System.out.println();// outputs blank line
myMethod.displayMessage();
System.out.println( "please enter the Part Description" );
String theDescription = input.nextLine(); // read a line of text
myMethod2.setpartDescription( theDescription );// set the part description
System.out.println();// outputs blank line
myMethod2.displayMessage();
}// end main mehtod
}// end class//constructors
public void setpartNumber( String number, String description )
partNumber = number; //initalize quantity
partDescription = description; // initalize partDescription
}// end constructorsThe above code is not a constructor. You do not include a return type, void or anything else. Also, the constructor should be called the same as your class.
public Invoice( String number, String description )
partNumber = number;
partDescription = description;
} Another thing, comments should only be used when it isn't bleedingly obvious what your code is doing.
P.S. is your middle initial C? -
Im DROWNING! need help with a simple java assignment! plz someone help me!
i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!
You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/* File: sinnumber.java
Author: Ashley
Date: October 2006
Purpose: Lab1
import java.util.Scanner;
public class Lab1
public static void main(String[] args)
Scanner input = new Scanner(System.in);
int sin = 0;
int number0, number1, number2, number3, number4, number5, number6, number7, number8;
int count = 0;
int second, fourth, sixth, eighth;
System.out.print("\t\n**********************************");
System.out.print("\t\n**********SIN Validation**********");
System.out.print("\t\n**********************************");
System.out.println("\t\nPlease enter the First sin number: ");
sin = input.nextInt();
count = int.length(sin);
if (count > 8 || count < 8)
System.out.print("Valid: ");
} -
Can anyone help with a simple coding problem?
I'm creating a website using Dreamweaver MX 2004 and making a
real mess of it!
I have created two pages which are identical in terms of
background, but one has a text box in the middle. What I want to
happen when you click the link to this page is the first one
without the text box appears for a couple of seconds, then the
other page automatically loads to give the impression that this
text box has magically appeared. really simple, but I can't find
any behaviour codes to make this happen!
Can anyone help me out with a code or give me a clue to how
it can be achieved really easily.
Cheers everyone!You can try just using the same page and hiding and showing
the layer using the Behaviors menu. that would acheive the same
thing without having to load another page. -
Help with Difficult Sorting Task - Script Inside
Hello,
I have a very time consuming task that I would like to adjust the script below to help cut down the labor. The script below, will ask for a root folder and will copy all the folders inside that root folder to a secondary location. It will only copy the folders and not the files inside them. This works great. But my next step is to manually drag and drop the ".cos" files from the "master drive" from each shot folder to the emtpy "Settings50" folder that has been duplicated to my desktop. Is it possible in any way, to first copy the whole folder structure, and then only copy the "Settings50" folder and the files inside them to the secondary location? The image attached shows what I need duplicated in green and what I do not want duplicated in red. The reason I cannot simply copy the whole root folder is because the RAW files in red are very very large and takes forever to copy. I ONLY need the folder structure duplicated with the Settings50 folder copied with files inside them to a secondary location. If you can help out I would very very much apprecieate it!
on run
set source_folder to choose folder with prompt "Select folder to be duplicated:" as string
my do_main_script(source_folder)
end run
on open of source_folder_list
repeat with i from 1 to number of items in the source_folder_list
set this_folder_path to item i of the source_folder_list as string
if last character of this_folder_path is ":" then
my do_main_script(this_folder_path)
end if
end repeat
end open
on do_main_script(source_folder)
tell application "Finder" to set source_folder to folder (source_folder)
set the target_folder to (choose folder with prompt "Where would you like the duplicated folders to be moved to?")
if source_folder is not "" and target_folder is not "" then
set new_folder_name to (name of source_folder as string) & " duplicate"
set source_folder to source_folder as string
set target_folder to target_folder as string
my create_new_folder(target_folder, new_folder_name)
my duplicate_folder_structure(source_folder, target_folder & new_folder_name & ":")
end if
end do_main_script
on duplicate_folder_structure(source_folder, target_folder)
tell application "Finder"
try
get name of folders of folder (source_folder)
set folder_list to result
repeat with i from 1 to number of items in the folder_list
set this_folder_name to item i of the folder_list as string
my create_new_folder(target_folder, this_folder_name)
my duplicate_folder_structure(source_folder & this_folder_name & ":", target_folder & this_folder_name & ":")
end repeat
end try
end tell
end duplicate_folder_structure
on create_new_folder(target_folder, new_folder_name)
tell application "Finder"
try
if not (exists item (target_folder & new_folder_name)) then
make new folder at folder target_folder with properties {name:new_folder_name}
end if
end try
end tell
end create_new_folder
Thanks!
AnthonyWell, I think this will be close. test it and see what needs to be improved.
on run
set source_folder to choose folder with prompt "Select folder to be duplicated:" as string
my do_main_script(source_folder)
end run
on open of source_folder_list
repeat with this_item in the source_folder_list
if last character of (this_item as string) is ":" then
my do_main_script(this_item as string)
end if
end repeat
end open
on do_main_script(source_folder)
set the target_folder to (choose folder with prompt "Where would you like the duplicated folders to be moved to?")
if source_folder is not "" and target_folder is not "" then
tell application "System Events" to set new_folder_name to (name of source_folder) & " duplicate"
set new_folder to checkForFolder(target_folder as string, new_folder_name)
duplicate_folder_structure(source_folder as string, new_folder)
end if
end do_main_script
on duplicate_folder_structure(source_folder, target_folder)
tell application "System Events"
set folder_list to folders of folder source_folder
repeat with this_folder in the folder_list
set this_folder_name to name of this_folder
set new_folder to my checkForFolder(target_folder as string, this_folder_name)
my duplicate_folder_structure(path of this_folder, new_folder)
end repeat
end tell
tell application "Finder"
set cos_file_list to every file of folder source_folder whose name ends with ".cos"
duplicate cos_file_list to target_folder
end tell
end duplicate_folder_structure
to checkForFolder(fParent, fName)
tell application "System Events"
if not (exists folder fName of folder fParent) then
set output to path of (make new folder at end of folder fParent with properties {name:fName})
else
set output to (path of (folder fName of folder fParent))
end if
end tell
return alias output
end checkForFolder
Maybe you are looking for
-
Hello, I wonder could anybody help me with this problem... Essentially, when I turn on my PB G4 i first get a globe picture, then the flashing question mark (its searching for the startup disk presumably...) This screen then freezes after a couple of
-
Dear Friends, The user is interested in following reports. Please suggest what is the best report available in SAP CO? 1. Report to display the cost of raw material in current month and previous month and also it should display price changes? 2. over
-
When i open more than 1 document, it opens in current document window not a new window. both documents show in window list, so only 1 visible at same time. Anyone? cs5 just installed, mac os10.6.3
-
Macmini and LCD 37" Philips 9986. what appened?
Hi, I bought my first mac and I was really happy to finally change from the Windows mediacenter. I own a Philips 37" 9986 LCD television with DVI and the macmini connected with DVI cable. For two weeks everything worked properly but suddenly powering
-
CiscoWorks: How to receive reports in email attachment?
Hi, Please guide me that how I can get scheduled reports in Campus Manager in email attachment. I am unable to receive email for the schedule reports saying error says that unable to connect the smtp on port 25. In the location CS->Server->System Pre