Help with Cable

I'm sure this has been asked before but I trawled through the search results and got confused. So I'm thick I know that but could I please have an answer in very simple terms. I have an iPod Touch 16gb. I have a stereo; and also an entertainment system that connects to my TV and DVD Player. I want to be able to connect the iPod to the stereo and the entertainment system (obviously not at the same time lol). I don't care about video at this stage just stereo sound. I've trawled Apple and also a local auction site and there seem to be two different types of cable - those that plug in from the dock port of the iPod to the stereo ports and those that plug in from the headphone jack of the iPod to the stereo ports. Which one do I get please? I don't want the most expensive, just a simple cable so I can listen to my music out in the garage when I'm doing weights or to the entertainment system in the lounge when I'm cooking or doing housework. I would be most grateful if someone could help - thanks in advance

The reason that you're confused is because there's two kinds of port that can be used on the telly. Now, we can't answer your question because we don't know which port that you're television support. If you can find the manual of your telly that will be great. Most television should support S-video and composite. Once you know then buy the corresponding one.

Similar Messages

Help with cabling please

We need a longer ethernet cable to connect our vision box with our hub (powerline adapters not suitable) but with so many out there my hubby wont let me just buy the one i want (it doesn't have the yellow ends) as he wants to make sure it is compatable. I didn't think there was much difference between cables but if you guys can help me out and tell me exactly which one to buy that would be great.
I need at least 5 metres in length thank you in advance.
Solved!
Go to Solution.

you don't have to buy the dearest one either, but you could tell him it cost a fortune, then use the rest of the money for a new handbag
(not that I'd do that being a bloke, but know for sure that SWMBO would and does do that to me! I had no idea the bread costs £45!)
-+-No longer a forum member-+-

790GX-G65 Help with cableing please

--------------------------------------------------------------------------------
Just starting to put together my first self build and could do with a little advice on some cables. My case (Antec 300) has 2 fans and their power leads have large 4 pin conecters, but the motherboard has small 3 pin headers (SYSFAN1/2). My PSU (OCZ ModXstream) however has a modular cable that reduces the large conecter too a small, but still 4 pin one. Do I use this and connect to the fan header leaving one wire unatached.
Also, there are 3 hard wired PSU cables, one 20+4 main, and two CPU cables, one 4 pin and one 8 pin. The M/B only has a 4 pin header(PWR1) so do I leave the 8 pin unconected and just tuck it away somewhere.
Sorry if I sound a complete idiot but I just want to be sure I am not going to destroy anything.
Regards and thanks
Nigel.

You can plug the fans either to the board (the 4 pin connector should fit in the motherboard headers) or directly in your PSU. If you connect then to the MOBO you'll be able to monitor then through your BIOS and AMD Overdrive. If you connect them to the PSU usually they'll run at max speed unless you get a fan controller. Also as you said you should tuck away the 8 pin CPU power connector since your board uses the otherone.
I hope this helps.

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Help with display quality (LCD TV)

I've hooked up my Mac mini to my Samsung 32" LCD TV via HDMI cable.
The overall quality is just far from desireable and is taking away all of the fun from using this new mac.
I set the resolution output to 720p, which is what the TV supports. So that's good.
I played slightly with the Contrast and Brightness on the TV settings.
But I must be missing something. Although the image is sharp, it's very difficult to read from 6ft away, pictures look terrible (seeing the same picture on a different computer and monitor is so much more revealing), and the display is bad for everything basically.
Please help with any settings suggestions or perhaps a detailed guideline for my setup.
I started to configure a color profile on the display settings but the results weren't that great and I reverted to default. Too many subtle changes. My colorblindness probably doesn't help.
Thanks.

Thanks for the response.
It's the latest Mac Mini with 2.5ghz i5, AMD Radeon HD 6630M, and 8GB RAM.
I am familiar with the "Just Scan" setting under picture size on the Samsung TV.
I'll look for the digital noise reduction.
Are there complete guides with recommended settings for different setups? Or maybe even general, that would help me here?
Thanks.

The best way to get help with logic

I was posting in a thread on support for logic which appears to have been deleted. anyway, what I was going to say I think is useful info for people, so I'm going to post it anyway. to the mods - it doesn't contain any speculation about policies or anything like that. just an explanation of my views on the best way to deal with issues people have with logic, which I think is a valuable contribution to this forum.
I think there's a need for perspective. when you buy an apple product you get 90 days of free phone support to get everything working nice and neat. you can call them whenever, and you could actually keep them on the phone all day if you wanted, making them explain to you how to copy a file, install microsoft office, or any number of little questions no matter how simple - what is that red button thingy in my window for?.. on top of that, you've got a 14 day dead on arrival period (or 10 days I can't remember) in which if your machine has any kind of hardware fault whatsoever it's exchanged for a totally new one, no questions asked. a lot of people complain that applecare is overpriced.. and if you think of it just as an extended warranty, then it is a little pricey. but if you are someone that could use a lot of phone support, then it's actually potentially a total bargain. the fact that 2 or more years after you bought a computer, you could still be calling them every single day, asking for any kind of advice on how to use anything on the machine, is quite something. many people on this forum have had problems when they made the mistake of upgrading to 10.4.9 without first creating a system clone or checking first with their 3rd party plug in vendors to make sure it was ok. so, with apple care, you could call them and keep a technician on the phone _all day_ talking you through step-by-step how to back up all of your user data, how to go through and preserve your preferences and any other specific settings you might not want to lose, and then how to rollback to an earlier OS version.. they'll hold your hand through the whole thing if you need them to.
as for applecare support for pro apps like logic, I'd be the first person to agree that it's not great for anyone except beginners and first time users. if you look at what it takes to get even the highest level of logic certification, it's all pretty basic stuff. and logic doesn't exist in a vacuum, there is an entire universe of 3rd party software and hardware, as well as studio culture and advanced user techniques that are going to be totally invisible to some poor phone support guy at apple that did a logic 101. but it's not hard to see that apple are trying to promote a different kind of support culture, it's up to you to decide whether you want to buy into it or not.
the idea is that they are able to provide basic setup support for new users, including troubleshooting. because it's a simpler level of support, at least they can do this well. so there's no reason why any new user with say a new imac and logic can't get up and running with the 90 days of phone support they get for free.
but the thing is, for extremely high end pro users it's a different matter altogether. pro use of logic within the context of say, a studio or a film composition scenario is a very different world. it's almost a nonsense to imagine that apple could even hire people capable of giving useful support for this end of the spectrum, over the phone. there are so many variables, and so many things that require a very experienced studio person or in-work composer to even begin to understand the setup, let alone troubleshoot it. and it's a constantly evolving world, you actually have to be working in it and aware of developments on 3rd party fronts as well as changes in hardware.. not to mention even changes in the culture of studio production and the changed expectations that come from that. there's no way some poor little guy sitting at a help desk at apple can even hope to be privy to that kind of knowledge. it's already good enough that they don't outsource their support staff to india, let alone go out to studios and hire the very people with the skills that should be staying in the studio! not answering phones for apple.
so, given this reality.. companies have two choices. they can either offer an email based support ticket system, which others do. but in my opinion.. this can just be frustrating and only a half-solution. sure you 'feel' like you are getting a response from the people that make the software and therefore must know it.. but it's not really the case due to what I said above. DAWs don't exist in a vacuum, and so much of what you need to understand to help people requires an intimate knowledge of the music industry in which they are working. you still won't get that from steinberg, even if they sort of answer your emails. the other problem is that this kind of system can mean sporadic answers, a lot of tail-chasing, and quite often you won't get an answer that helps you in the end anyway.
the other model is to foster a strong user support culture. some people react in the wrong way to this idea.. they just think it's a big brush off from the manufacturer, saying we don't care, go sort it out yourselves.. but this isn't true. apple has a classification for pro resellers called 'apple solutions expert - audio'. what this means is that these dealers are recognised as audio specialists and they can receive extra support and training from apple for this. but more importantly than this.. most of them are music stores, or pro gear dealerships that are also mac and logic dealers. they already employ people that have worked or do work in the music industry, and are constantly on top of all of this stuff. apple encourages these dealers to run workshops, and to provide expert sales advice in the very niche area that logic is in, which they can do far better than some generic apple store ever could. but most importantly, they are encouraged to offer their own expert after-sales support and whatever other value-adding expertise they can, to get sales. because margins in computer gear are so tight nowadays, discounting is not really a viable option for these dealers to guarantee getting musicians to buy computers and logic setups from them. the only companies that can entice people with a lower price a big online wholesalers or big chain stores. so the best idea for these niche expert stores to get sales is to offer you their own experts to help with configuration, ongoing support and to generally make it a better idea that you bought your system from them rather than from some anonymous online store. I can see the wisdom of this.. it puts the support back out there on the ground where it's needed, and also where it can work best. apple could never hope to offer the same level of expertise in helping a film composer work through some issues with a specific interface or some highly specific issue they have with getting a task done. no big software manufacturer could do this anywhere near as well as people out there that have worked in studios or currently do work in studios. so in my opinion it's a far better model to foster this kind of support culture, along with training courses, books and training video support. also user forums like this one are possibly one of the most valuable ports of call anyone could ask for. apple couldn't replicate this with their own staff, even if they tried. and even if they made a system where some of the people close to logic development were able to answer emails, it would still be nowhere near as useful, as rapid or as capable of being up to speed with logic use out in the real world with 3rd pary gear, as any of these other methods are.
the only thing I think they could do better would be to publish a list of known bugs which are officially recognised. this would help everyone and put an end to a lot of wasted time and speculation on if something is a bug totally to do with logic, or if it's a specific issue raised by a particular configuration.
but really, in my view, a 3rd party support and training culture through a combination of specialist dealers, consultants that literally run a business setting up computers for pro-users and helping them keep it all working, online user-to-user forums and published materials really are the way forward.

In all honesty this is currently the 3rd "logicboard" (motherboard)
in my powerbook due to a design flaw regarding the 2nd memory slot....
Yep. Mine failed five weeks after I bought it. However, I bought it for work and couldn't afford being without it for four weeks while they fixed it, so I had to live with it. My serial number did not entitle me to a replacement either, post Applecare.
My firewire ports have burnt out from a third-party defective device (no hot-plugging involved)
My screen is blotchy (my PW serial number did not entitle me to a replacement).
My battery serial number did not entitle me to a replacement, and is not that good these days.
My guaranteed Powerbook-compatible RAM is actually not, causing RAM related problems, most notably these days meaning that as soon as I switch to battery power, the laptop crashes, so I can only use mains power. The company I bought it from stopped taking my calls and wouldn't replace it after they replaced it once, so I'm stuck with it. And of course, only one ram slot is working, so I can't even use my original stick in the first slot, which would shift the dodgy stuff away from the lower system area.
My power supply failed at the weak spot and caught fire. I managed to break apart the power supply and recable it so I didn't have to buy a new power supply, although the connection at the laptop end is loose (all the more fun that as soon as power is lost, the laptop crashes - see above). The power supply is held together with gaffa tape. Silver gaffer tape though, so it's still kind of 'Appley"...
My internal hard drive is dying - four or five times now it clicks and won't power up, causing the laptop to die.
One foot has fallen off (but glued back on).
The lid is warped.
The hinge is loosish.
The S-Video adaptor cable is intermittent.
But aside from all that, I have looked after it well, and I love it to death. Just as well, because it doesn't look like it will be that long...
But it still "just works". Apart from the battery power obviously. And the ram slot. And the ram. And the screen. And the hard drive. And the firewire ports. And the feet.
But everything apart from the main board, the screen, the case, the hard drive and the power supply works fine. So thats... er..
Hmm.

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

Help with ethernet problems

Can anyone help with this?
Have a black powerbook, snow leopard, safari. No problems at all with wireless/ethernet at home
When at work, usually just unplug ethernet from work PC and once plugged into mac, it automatically detects internet connection just like that
For some reason, tonight, when I try this have no connection (an exclamation mark over the airport icon) and when I go into network in sys pref, says "self assigned ip address"
If I switch to DHCP manually, can input ip address from PC and it works fine but whenever i try and switch to automatic, it wont work
Have spent ages looking through the internet to try and find answer - firewall is off, no recent changes to software/hardware, flushed ipfw, etc
Any bright ideas?
Thanks a lot

I am a bit confused by your post. Are you trying to connect to your network wirelessly using the AirPort card, or are you trying to use a wired connection via your Ethernet port?
What is the source of your Internet connection? DSL? Cable modem? Something else?
Are you connected to a router? What make and model?
Best of luck.

Can anyone help with email in my old G4 17" ??

My G4 17", bought December 2004, is considered an antique by Apple, and no longer supported. (I now mostly use my early 2011 MacBookPro.)
But the big screen on by G4 is very useful for Sibelius 4, the music program I mostly use (Sibelius 7 in the MacBookPro - but much too fussy for me.)
Sibelius 4 in the G4 continues to work flawlessly.
But my email account recently sort of died. It's POP account (whatever that means). I can no longer receive messages, BUT I can still create and
send new messages, and of course forward any saved message to myself in the MacBookPro.
ALSO: if I have to shut down the G4, it usually reopens with a horizontally divided display, and it usually takes many restarts before it will open
will a full screen display (seems to reopen correctly more often if left in a cool place overnight.)
Can anyone help with one or both these issues? I want to keep the G4 going as long as I can. BTW, I don't use it for browsing anyone, Safari installed,
because it is now so slow. The MacBookPro handles all that for me.
Thanks very much, James Johnson in Plattsburgh NY (where it is still cold and wintry, o f--k)

To RCCHARLES: THANKS !!!! I did the safe boot start, following the link you provided, then waited, and waited, and waited, and ---
Well that is interesting. Amoung other things safe boot does:
-- check and fixes up your file system. The files system allows you to keep files on your harddrive.
-- Does all video rendering in software.
You could have a one time glitch or harddrive is slowly failing. If you never replaced the harddrive, it is time for a new one.
You may want to consider getting a new harddrive. The easiest way is to get an external drive. No disassembly of the machine is required.
You need an external Firewire drive to boot a PowerPC Mac computer [ a few G5's will boot from USB ].
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
I'd give OWC a call. 1-815-338-8685.
FireWire 800 + USB 3, + eSATA
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
     (2) FireWire 800/400 Ports (Up to 100MB/s / 50MB/s)
     (1) USB 3.0 Port (Up to 500MB/s / 60MB/s)
     (1) eSATA Port (Up to 300MB/s)
Has a combo firewire 800/400 port. Not sure what this is. Looks like you will need 400 cable.
http://eshop.macsales.com/shop/ministack

Airport Extreme Base Station not cooperating with Cable Modem

The non-specific issues are by far the most frustrating and I can't make any sense of this. To be fair, this might not be a AEBS issue as much as a ISP issue, but any suggestions are much appreciated.
History: My setup has worked great for about 6 months, but recently I've been having intermittent problems (described below) that have been getting progressively worse and more frequent. The issues have not changed in relationship to firmware/software updates for the AEBS and airport utility.
Setup: Cable Modem (Time Warner Kansas City is ISP) --> AEBS (A1143 on the latest firmware) --> periodic wireless connection to imac, macbook pro and 2 iphones. A Time Machine (hard drive) is also connected to the AEBS via USB.
Symptoms:
-Intermittent disconnects and slowdowns over wireless
-Wired connections are completely unaffected.
-Loss of wireless internet connectivity is consistent through all devices.
-Time machine is unavailable when the internet is not accessible.
-During disconnects sometimes the router doesn't even appear, sometimes I can connect but can't reach my time machine or the internet, sometimes it won't accept my password and sometimes it times-out.
Sounds like the wireless transmitter is going out on the AEBS or something, right? Well, Apple was kind enough to replace my AEBS under warranty to try to solve this problem, but it hasn't gone away.
Could this be an issue with my ISP not distributing IP address properly or something? I'm not really very savvy with the way all that works.
Thanks for your help with this mess.

Its gotta be the surrounding interference issue. I found a macworld article that refers to testing the different channels in the 2.4gHz range and finding some completely unusable (as you mention). If I didn't have a couple iPhones that can't run 5gHz, I'd certainly bump up to that because apparently that's where the performance is!
Here's a link to the article, although it's mostly a review, though information within is pertinent to our issue.
http://www.macworld.com/article/59923/2007/09/airportextreme.html

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need help with a WRT54GS V5.1

i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.

Access Setup page of router .....
Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Help with Cable

Similar Messages

Maybe you are looking for