Help With Dumb Monitor Question...

I have a Mac Pro, Dual 2.8g, and it's attached to an old Cinema Display. I was told (don't laugh, I don't know this stuff) that if I wanted, I could buy, say, a 32 or 34 inch Sony flat screen TV and use it as a second monitor, and it would double as a second TV up here in this room. If this is true, what kind of connections would I need to get from the Mac Pro to the Sony?
I would use the Sony for viewing Quicktime moves while I score the music on the main Mac monitor.
Thanks
Tom

I am going to assume that your video card has 2 DVI slots on it like most of the newer mac pro's do, and that the cinema display is plugged into only one of them. If not, please disregard this post.
Depending on the TV (I would have to see the specs) there are several ways to do this. If the TV has computer support, chances are it has a 15 pin VGA connector on it. This would require you getting a DVI to 15 pin VGA converter cable (you mac pro may have even come with one. not sure) and a 15 pin VGA cable to get to the tv. Another option would be if the TV has HDMI support you can buy DVI to HDMI cables for pretty cheap. Please keep in mind that neither of these options will xfer sound to your tv only video though you can just use your pc speakers for the sound
If the TV has neither the computer jack nor an HDMI jack... this gets a whole lot more complicated and probably won't be worth the effort. I hope this helps!

Similar Messages

HT5787 How do you get help with your security questions if you forget your answers?

How do you get help with your security questions if you forget your answers?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97108)

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Help with faulty monitor

Hi all
I have a 19" CRT monitor which I use with my G5. The monitor has developed a fault and I wonder if anyone might be able to help diagnose what the problem is.
Whenever there is a large area of white on the screen the picture develops a high frequency wobble in a horizontal band accross the screen. This is accompanied by a squealing sound from the monitor itself.
Does anyone know what might be the cause of this and is it likely to be repairable?
Thanks in advance...
Derek.

Letter from LaCie technical support. It seemed to help me, the monitor is working fine, must have been loose connection.
Thanks for contacting LaCie Technical Support. Try the following to see
if they resolve your issues:
--Try a different VGA cable to eliminate that as a cause (if this
monitor's cable is not built-in).
--Try the monitor on a different computer or a different monitor on the
same computer to verify it is not a video card issue.
The following two especially apply if the monitor has been moved, or
there have been changes in the environment around the monitor.
--The monitor can be affected by magnetic or electromagnetic energy.
Make sure there are no magnets on or by the monitor (especially
speakers). Keep the monitor and its cables away from motors,
high-voltage areas, electrical cords, metal poles, etc.--anything that
can produce or conduct electricity or magnetism.
----The monitor can be affected by dirty power. Put the monitor on a
power conditioner on a dedicated circuit if at all possible. Appliances
sharing the same circuit can cause trouble--blenders, microwaves,
hairdryers, fans, even other monitors, etc. Also, try a different
circuit in case the circuit you are using is wired incorrectly.
Please include all previous messages if you reply. This information will
be required by the email support team to further assist you. Thank you.
Answers to most common questions can be found in the manual on the CD
that came with your product or in our FAQs:
http://www.lacie.com/support/faq/
Regards,
LaCie Technical Support Team

Please help with strange monitor/Lightroom 4 interaction problem

I bought a Dell Ultrasharp U3011 yesterday, and I'm now facing a very strange problem. It's sort of related to the common discussed issue of Lightroom's color management, but there is a twist here. I'll explain.
The monitor I had been using (and still have) was a Samsung SyncMaster 244T. I had no problems at all with it.
With the U3011, I've run into this problem:
-When I view files in Lightroom 4, the colors are muted and contrast low. The same files seen in Xnview, ACDSee Pro (with the color management turned off), Digital Photo Professional (colorspace set to sRGB), are much more vivid. In Photoshop, if I use the default color setting, it looks muted like Lightroom (I'm guessing because Adobe products have default color profile set to ProPhoto RGB), but if I set the color profile to the monitor's profile, it becomes vivid and matches the other software I mentioned. If I use any other profile such as sRGB IEC81966-2.1, ProPhoto RGB, Adobe RGB, etc, it doesn't match the other software I mentioned. This is strange because the other ones match each other because they are set to sRGB, but in Photoshop, even if I set the color profile to sRGB, it still doesn't match.
-In Lightroom 4, even if I use Soft Proofing, nothing changes. It's as if Soft Proofing is broken--it doesn't do anything, no matter what color profile I choose.
-Now, here's the twist. I didn't have any of these problems when I use the 244T. This leads me to assume that the problem is how the U3011 is interacting with Lightroom. I did a quick comparison of opening up the same image on both monitors in ACDSee Pro, and they looked identical. (At this point, I had the U3011's preset set to sRGB. This is the only preset that makes the U3011 look identical to the 244T).
Next, I did an experiment, and I was very surprised by what happened. This is what I did:
With both monitors as a dual display setup, I turned on Before/After comparison in Lightroom (made sure both version had the same setting and look identical by copying the After's setting to Before). I then moved Lightroom's window so that one photo is seen on the U3011, and the other shows up on the 244T. And OMIGOD, they looked different! Why is this happening? I've already established that the same image looks identical on both monitors when viewed with ACDSee Pro, but in Lightroom, they looked different on each monitor.
And then things got even more weird. When I dragged the Lightroom window fully to one monitor or the other, Lightroom actually started changing the colors right before my eyes as it responded to which monitor was displaying which photo! Lightroom was somehow interacting with the monitor in real-time. So if the Before looked muted on U3011 and the After looked vivid on the 244T, when I drag the whole window into 244T, the muted Before will stay muted for about a second or so, and then it'll suddenly change and become identical to After. And when I did the reverse (drag the window into U3011), the reverse also happened--the vivid After will stay vivid on U3011 for about a second or so, and then it would suddenly change and become muted. Lightroom was identifying each monitor's color profile setting and changing the images according to which monitor was doing the displaying, and when the images were split between the two monitors, Lightroom was slitting them into two different settings to match whichever monitor is displaying which side.
So what the hell does that all mean, and what can I do to get Lightroom to display the photos so that they look the same as on all the other software I mentioned (so I don't have to play the guessing game of editing the images, export them out to other software to check how they turned out). Also, remember that I didn't have this problem with the 244T--Lightroom displayed the photos the same way as the other software I mentioned. The problem right now is that the U3011 is somehow causing Lightroom to display the photos differently, and no color profile presets in the OSD control can make them match.
I need to solve this problem, or else my last resort would be to return the U3011 and try another brand/model and see if that helps.
Any ideas?

Yes, that's basically sensible advice you got there (but I was more succinct ).
An important point that was mentioned over there is that you must not confuse document/source profile with monitor profile. They are both links in the color management chain, but they serve different purposes. The document profile defines the colors in a standard color space. The monitor profile describes the monitor's own native color space - its response to the RGB numbers it's fed. So one is translated into the other, by the application on the fly, through a normal profile conversion, and that way the colors appear on-screen as intended.
If those two profiles/color spaces are roughly similar, as they would be in the case of an sRGB document displayed on a standard gamut display - then you can get by without color management. It won't look too far off. But a wide gamut monitor changes the rules, because its native color space is not similar to sRGB, it's much closer to Adobe RGB.
Anyway, this is what color management is about. Any profile can be translated into any other. So in this context it doesn't really matter what color space the document is in - as long as you have a good monitor profile it will display correctly (within practical limitations). Lightroom is a sort of special case because its internal working color space is not one of the standard ones, instead it's a modified ProPhoto space with linear gamma. But the basic principle is exactly the same: source profile > monitor profile.
Just to go a little more in-depth while I'm at it: When you calibrate a display you actually do two separate things. You first calibrate it to a more or less standardized response. But that's just a linear one-dimensional correction. It does nothing about how color is actually reproduced, how red is red for instance. The calibration is global and affects everything system-wide because it's read into the video card or monitor hardware.
Then, once calibrated, a monitor profile is made. This is a full, complete and accurate description of the monitor's behavior, in three-dimensional color space. The precision level is much higher. This profile is used, by color managed applications like Lightroom and Photoshop, to display the image.
Other applications that are not color managed will simply ignore this profile, and send the RGB numbers straight through to the display, unmodified. With a standard gamut monitor (and an sRGB document) the difference won't be too dramatic and you may not notice it unless you look closely. But a wide gamut monitor will make the difference jump out immediately.

[SOLVED] Help with dual monitors (second monitor won't wake up)

Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)

I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons.

HELP with HP monitor 2309m

Today I turn on my HP monitor and I get only a color patterns.
http://youtu.be/2bgwI4rh2Lc
The cable is well attached to the monitor and the PC, I also changed the VGA cable.
My PC is sending the video signal, I tested it with another monitor.
As soon as I turn on my monitor, those patterns appeared. I turned off the monitor and turned it on again, and they reappeared. They are like a test pattern.
Can someone tell me what is wrong with my monitor and how can I fix it?
Thanks!

Hello @Gannd,
I understand that your HP Pavilion 2309m LCD wide-screen monitor is only giving you color patterns on it's display. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I need help with my security questions/answer?

I forgot my security questions answer

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
          Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
          Account Security.
     3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID

Help with multiple monitors

Hi Guys,
I've run in to a bit of an issue with my MP. I run three monitors off two GT120 cards. They work great in OSX and did work fine in Win7. We've just moved and when Ifired up the mac again at the new place the three monitors work fine in OSX still but when I bootcamp in to Win7 it will only work with one monitor if I power up the other two it either rearranges the screens around of blanks them all so that I end up with a black screen that I can move the mouse pointer around on and the other screens say they have no input and switch off. Occasionally win7 shuts down completely!
It's got me baffled.......I don't know windows that well to start rummaging around too much and OSX is working fine so the hardware is OK. HELP!!
Cheers
Mike
P.S. Everything is up to date.............in fact nothing has changed since the whole set-up was moved to the new house.

I think I have it worked out. I put the Kona card in "input passthrough" mode and all seems to work just fine. I had it in MacIntosh desktop and that was causing my problem
If any other suggestions I am sure open to them.
Thanks
John

Help with dumb tablet

So i had problems with my tablet with charging and sent it in they sent me a refurb ( cheap f**ks) and now its doing the same thing i have to shove the wire deep in. Anyways when i connect the tablet to the computer it does not charge it just says plugged in and also desktop manager doesnt recognize it please help im going nuts
on another note when i do a backup of my bb9900 it does not backup pictures and videos even though i said full backup please im going nuts someone help with this crappy products.

Is the USB lead an original Blackberry lead? If not, it will almost certainally cause problems with Desktop Manager. Also, it will not charge from the PC USB port but an exclamation mark informing you of this will appear in the top left corner of the PB.
Not sure why your BB9900 is not working with full backup, mine works perfectly and creates a folder called Blackberry in the 'My Pictures' folder (windows 7 x64).
Bob
https://twitter.com/bb_zealot

Mac and Windows with dual monitors Question

I use a Intel MacPro running Tiger with latest updates in my church. We use the Mac and Keynote 2.0.2 to present PowerPoint slides on the big screen (dual outputs). Everything was going well until the pastors upgraded to new computers running Vista and Office 2007. Now neither pastor's files will load into Keynote. It comes up with an error. The pastors have saved their files from PP as 2003 PPT files, and they still will not open. Error - unable to open file type. The one pastor went back to XP (dumped Vista) but still used the Office 2007 program and saved as PP2003, but the error still appears.
FYI - I noticed that Office 2007 saves with a file with the extension of .pptx instead of the .ppt. Checking the file they gave me shows that it is indead a .ppt file and not .pptx file. It makes no difference.
I believe it is an Office 2007 problem I'm dealing with. I have taken the .ppt file and loaded it onto the PC running PP 2003 and it loads fine, except for some format problems. I then resave it with a different name and tried to load that file (hoping it was converted) , with the same error showing. The problem is transfered with the file. Other files created with the PP 2003 program load fine into Keynote, so it has to be the Office2007 doing something.
So the questions are, is there an easy fix and still use the Keynote program, OR does Keynote 3 take care of this problem in the upgrade, OR should I install Win XP home or Pro and use parallels (which I have)? Would WinXP Home be enough to support the dual outputs and be fast enough? I am familiar with XP Pro not Home.
Any information you may have, could be a help. I need this resolved soon. I hate having to bring in the old Windows PC, after enjoying the quality of the Mac.

David.Austin.Allen wrote:
You should not have issues attaching two displays to the Mac mini. You will not be able to use an iPad as one of those displays.
I have no issues streaming video on demand from all of the media sources which you have listed. My Mac mini is the Early '09, so my hardware is not as powerful as the newest Mac mini.
Dah•veed
Thanks David - glad to here the Mini supports dual monitors, and you're not having any streaming issues. Did you have any special settings, like "no hardware acceleration"? Are you streaming HD content?
If it supports dual monitors, then I would think the iPad could be used as a second display and input device - the demos I've seen with Air Display (from Avatron Software") would accomplish what I'm looking for. Here is a demo at http://www.vimeo.com/16950420 showing the iPad working with a Windows machine, but I've seen them working with Macs as well.
Thanks again
Michael

Help with Audio Monitoring

Hey everyone.
I am new to both Mac's and Logic, but not to audio recording. I have a question that seems very simple, but yet I cannot seem to find an answer in the user guide, or the Sittter Pro Training Series books. I
I've configured my exernal MIDI devices to Logic (I'm using the Microlite interface). They show in the enviroment, and I've recorded MIDI data. I've played back MIDI data.
Lets say I have recorded a MIDI drum part using an external drum machine. In order to hear the audio output, after recording, I hook up the audio outs of the drum machine, to my MIDI interface (MOTU Traveler) and I assign an audio track in Logic to receive the audio signal. And here is where it gets fishy.
I have to hit the record button in Logic in order to hear audio, as the MIDI date is triggering my external drum machine. But what if, say, I want to record a mic'd source (or anything for that matter), but also need to monitor the drum machine audio triggered by my recorded MIDI data? I don't want to record the audio from the drum machine, I just want Logic to trigger it...as I need to hear the beat during recording.
I know I'm missing something.....
Thanks,
Jeff

Hi
You shouldnt need to put the drum machine audio into record to hear it. The Motu traveller should be able to route the audio from the drum machine to the outs 1-2 of the Motu unit.
To do this use Cuemix - should come with the motu software. This allows you to monitor any hardware you have without necessarily going into the software program and recording it just to hear it.
I that doesnt help, if you have a small amplifier, plug the drum machine into that. The midi from Logic will trigger the drum machine - all you are needing is an amp to hear it.
Hope this helps.
B
G5 1.8/ 3GB Ram Logic Pro 7.1.1 Mac OS X (10.4.6)

Help with T61 monitor warning

Whenever I use Adobe Photoshop Elements 5, or just recently installed Elements 7, I keep getting a warning at the start of the editing option that says "The monitor profile "Lenovo ThinkPad LCD Monitor" appears to be defective. Please rerun your monitor calibration software. It also has buttons to click "Ignore Profile" and "Use Anyway." I don't know what this means. I usually click the Ignore Profile button. Can someone tell me what I need to do to resolve this warning. And is there a Lenovo monitor calibration software? What do I need to do to calibrate the monitor. Thanks for any help you can give.

I think this is just to warn you regarding your colour profile of your monitor doesn't match with that of the software, which may result in colour inconsistencies.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Help with Secondary Monitor

I have my laptop hooked up to a LCD TV on when I go to drag my iTunes window onto the TV the video starts to skip. Checked the refresh rates on the video card and everything matches with the TV's refresh rate. Please help if you can!
iTunes 8 and Windows XP.

Activity Monitor can display system processes, so use it to ascertain which ones those are. There are other selections, so cycle through and see what's going on. Do note that those apps you installed may have put things into various Library directories. Look inside LaunchAgents, LaunchDaemons, and StartupItems subfolders and delete anything related to them. For general maintenance information, see
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X

Help With Dumb Monitor Question...

Similar Messages

Maybe you are looking for