Help with Audio Monitoring

Hey everyone.
I am new to both Mac's and Logic, but not to audio recording. I have a question that seems very simple, but yet I cannot seem to find an answer in the user guide, or the Sittter Pro Training Series books. I
I've configured my exernal MIDI devices to Logic (I'm using the Microlite interface). They show in the enviroment, and I've recorded MIDI data. I've played back MIDI data.
Lets say I have recorded a MIDI drum part using an external drum machine. In order to hear the audio output, after recording, I hook up the audio outs of the drum machine, to my MIDI interface (MOTU Traveler) and I assign an audio track in Logic to receive the audio signal. And here is where it gets fishy.
I have to hit the record button in Logic in order to hear audio, as the MIDI date is triggering my external drum machine. But what if, say, I want to record a mic'd source (or anything for that matter), but also need to monitor the drum machine audio triggered by my recorded MIDI data? I don't want to record the audio from the drum machine, I just want Logic to trigger it...as I need to hear the beat during recording.
I know I'm missing something.....
Thanks,
Jeff

Hi
You shouldnt need to put the drum machine audio into record to hear it. The Motu traveller should be able to route the audio from the drum machine to the outs 1-2 of the Motu unit.
To do this use Cuemix - should come with the motu software. This allows you to monitor any hardware you have without necessarily going into the software program and recording it just to hear it.
I that doesnt help, if you have a small amplifier, plug the drum machine into that. The midi from Logic will trigger the drum machine - all you are needing is an amp to hear it.
Hope this helps.
B
G5 1.8/ 3GB Ram Logic Pro 7.1.1 Mac OS X (10.4.6)

Similar Messages

Help with Audio for Premiere Project

Working on a lengthy project and need some help with audio which is not my specialty!
I am recording using a Sony EX1r and a wireless lav mic,     OK. Here is what is happening.
When I import the clip into project I get Audio from the left speaker.   If I burn a DVD and playback on home player with surround sound, I get audio out of just the left speaker which makes sense.    SO I go to Premier and use "Fill Left" which fixes the audio on my computer and get sound from left and right speakers.    The odd thing is that when I play this version back from DVD on the surround sound system, the audio now only comes from the CENTER speaker. I dont get anything out of left OR the right speaker so it sounds hollow.
I am sure I am missing something obvious so please be kind.
Is there an easy way to get my audio to come out of Left, Center, and Right speakers (and rear for that matter) ???
Thank you
Ted

Bill,
The DVD player is a Sony BluRay and the receiver is an Onkyo AV receiver HT-R380.
My thinking is that it is something that I am doing wrong inside Premiere vs something that the DVD player or receiver is doing.    My final product will need to play on a variety of DVD players so I need to get it right.
It just seems odd that my default output DVD provides sound to the left speaker but then removes it when I fill Left.
Am I setting up my audio tracks wrong? Or should I being doing something with a 5.1 track???
Thanks
Ted

Help with Audio Device Playback

Hoping someone out there can help. Before I updated to iTunes 7, I played back all of my iTunes music through some studio monitors connected to a Digidesign Mbox audio interface. Since upgrading, I cannot get clean audio using this device. When I select "Digidesign Mbox: Chan 1-2" as the default sound playback device in my QuckTime preferences, playing a song in iTunes gives me a garbled sound--almost sounds like a CD that's skipping. Can anybody help with a solution? I hate having to listen to my tunes through two tiny cheap computer speakers!
Thanks in advance,
Mike

I have the same problem. I get the garbled "Skipping" sound when I use the new version of iTunes. The only way I have to get around it is an old version of iTunes 6 I have saved - it has the same version of Quick Time Attached that was good (then) and should work with the WaveDriver. I have an MBOX 2 and it sounds GREAT.
It really is bad that Apple has this "New, Great" iTunes but it won't work with the existing hardware. I can go from my Sound Card out to my Monitors, but the sound quality is bad. And it is so much easier to just use the MBOX volume adjuster - it is very handy.
Apple, please fix this problem. I want to download DRM free music but iTunes 7.2 does not work with MBOX 2.
AlienWare Area 51 Windows XP 4gb RAM, nVidia 6200TC, SoundBlaster Audigy, MBOX 2

Please help with strange monitor/Lightroom 4 interaction problem

I bought a Dell Ultrasharp U3011 yesterday, and I'm now facing a very strange problem. It's sort of related to the common discussed issue of Lightroom's color management, but there is a twist here. I'll explain.
The monitor I had been using (and still have) was a Samsung SyncMaster 244T. I had no problems at all with it.
With the U3011, I've run into this problem:
-When I view files in Lightroom 4, the colors are muted and contrast low. The same files seen in Xnview, ACDSee Pro (with the color management turned off), Digital Photo Professional (colorspace set to sRGB), are much more vivid. In Photoshop, if I use the default color setting, it looks muted like Lightroom (I'm guessing because Adobe products have default color profile set to ProPhoto RGB), but if I set the color profile to the monitor's profile, it becomes vivid and matches the other software I mentioned. If I use any other profile such as sRGB IEC81966-2.1, ProPhoto RGB, Adobe RGB, etc, it doesn't match the other software I mentioned. This is strange because the other ones match each other because they are set to sRGB, but in Photoshop, even if I set the color profile to sRGB, it still doesn't match.
-In Lightroom 4, even if I use Soft Proofing, nothing changes. It's as if Soft Proofing is broken--it doesn't do anything, no matter what color profile I choose.
-Now, here's the twist. I didn't have any of these problems when I use the 244T. This leads me to assume that the problem is how the U3011 is interacting with Lightroom. I did a quick comparison of opening up the same image on both monitors in ACDSee Pro, and they looked identical. (At this point, I had the U3011's preset set to sRGB. This is the only preset that makes the U3011 look identical to the 244T).
Next, I did an experiment, and I was very surprised by what happened. This is what I did:
With both monitors as a dual display setup, I turned on Before/After comparison in Lightroom (made sure both version had the same setting and look identical by copying the After's setting to Before). I then moved Lightroom's window so that one photo is seen on the U3011, and the other shows up on the 244T. And OMIGOD, they looked different! Why is this happening? I've already established that the same image looks identical on both monitors when viewed with ACDSee Pro, but in Lightroom, they looked different on each monitor.
And then things got even more weird. When I dragged the Lightroom window fully to one monitor or the other, Lightroom actually started changing the colors right before my eyes as it responded to which monitor was displaying which photo! Lightroom was somehow interacting with the monitor in real-time. So if the Before looked muted on U3011 and the After looked vivid on the 244T, when I drag the whole window into 244T, the muted Before will stay muted for about a second or so, and then it'll suddenly change and become identical to After. And when I did the reverse (drag the window into U3011), the reverse also happened--the vivid After will stay vivid on U3011 for about a second or so, and then it would suddenly change and become muted. Lightroom was identifying each monitor's color profile setting and changing the images according to which monitor was doing the displaying, and when the images were split between the two monitors, Lightroom was slitting them into two different settings to match whichever monitor is displaying which side.
So what the hell does that all mean, and what can I do to get Lightroom to display the photos so that they look the same as on all the other software I mentioned (so I don't have to play the guessing game of editing the images, export them out to other software to check how they turned out). Also, remember that I didn't have this problem with the 244T--Lightroom displayed the photos the same way as the other software I mentioned. The problem right now is that the U3011 is somehow causing Lightroom to display the photos differently, and no color profile presets in the OSD control can make them match.
I need to solve this problem, or else my last resort would be to return the U3011 and try another brand/model and see if that helps.
Any ideas?

Yes, that's basically sensible advice you got there (but I was more succinct ).
An important point that was mentioned over there is that you must not confuse document/source profile with monitor profile. They are both links in the color management chain, but they serve different purposes. The document profile defines the colors in a standard color space. The monitor profile describes the monitor's own native color space - its response to the RGB numbers it's fed. So one is translated into the other, by the application on the fly, through a normal profile conversion, and that way the colors appear on-screen as intended.
If those two profiles/color spaces are roughly similar, as they would be in the case of an sRGB document displayed on a standard gamut display - then you can get by without color management. It won't look too far off. But a wide gamut monitor changes the rules, because its native color space is not similar to sRGB, it's much closer to Adobe RGB.
Anyway, this is what color management is about. Any profile can be translated into any other. So in this context it doesn't really matter what color space the document is in - as long as you have a good monitor profile it will display correctly (within practical limitations). Lightroom is a sort of special case because its internal working color space is not one of the standard ones, instead it's a modified ProPhoto space with linear gamma. But the basic principle is exactly the same: source profile > monitor profile.
Just to go a little more in-depth while I'm at it: When you calibrate a display you actually do two separate things. You first calibrate it to a more or less standardized response. But that's just a linear one-dimensional correction. It does nothing about how color is actually reproduced, how red is red for instance. The calibration is global and affects everything system-wide because it's read into the video card or monitor hardware.
Then, once calibrated, a monitor profile is made. This is a full, complete and accurate description of the monitor's behavior, in three-dimensional color space. The precision level is much higher. This profile is used, by color managed applications like Lightroom and Photoshop, to display the image.
Other applications that are not color managed will simply ignore this profile, and send the RGB numbers straight through to the display, unmodified. With a standard gamut monitor (and an sRGB document) the difference won't be too dramatic and you may not notice it unless you look closely. But a wide gamut monitor will make the difference jump out immediately.

[SOLVED] Help with dual monitors (second monitor won't wake up)

Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)

I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons.

Help with faulty monitor

Hi all
I have a 19" CRT monitor which I use with my G5. The monitor has developed a fault and I wonder if anyone might be able to help diagnose what the problem is.
Whenever there is a large area of white on the screen the picture develops a high frequency wobble in a horizontal band accross the screen. This is accompanied by a squealing sound from the monitor itself.
Does anyone know what might be the cause of this and is it likely to be repairable?
Thanks in advance...
Derek.

Letter from LaCie technical support. It seemed to help me, the monitor is working fine, must have been loose connection.
Thanks for contacting LaCie Technical Support. Try the following to see
if they resolve your issues:
--Try a different VGA cable to eliminate that as a cause (if this
monitor's cable is not built-in).
--Try the monitor on a different computer or a different monitor on the
same computer to verify it is not a video card issue.
The following two especially apply if the monitor has been moved, or
there have been changes in the environment around the monitor.
--The monitor can be affected by magnetic or electromagnetic energy.
Make sure there are no magnets on or by the monitor (especially
speakers). Keep the monitor and its cables away from motors,
high-voltage areas, electrical cords, metal poles, etc.--anything that
can produce or conduct electricity or magnetism.
----The monitor can be affected by dirty power. Put the monitor on a
power conditioner on a dedicated circuit if at all possible. Appliances
sharing the same circuit can cause trouble--blenders, microwaves,
hairdryers, fans, even other monitors, etc. Also, try a different
circuit in case the circuit you are using is wired incorrectly.
Please include all previous messages if you reply. This information will
be required by the email support team to further assist you. Thank you.
Answers to most common questions can be found in the manual on the CD
that came with your product or in our FAQs:
http://www.lacie.com/support/faq/
Regards,
LaCie Technical Support Team

HELP with HP monitor 2309m

Today I turn on my HP monitor and I get only a color patterns.
http://youtu.be/2bgwI4rh2Lc
The cable is well attached to the monitor and the PC, I also changed the VGA cable.
My PC is sending the video signal, I tested it with another monitor.
As soon as I turn on my monitor, those patterns appeared. I turned off the monitor and turned it on again, and they reappeared. They are like a test pattern.
Can someone tell me what is wrong with my monitor and how can I fix it?
Thanks!

Hello @Gannd,
I understand that your HP Pavilion 2309m LCD wide-screen monitor is only giving you color patterns on it's display. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Help with multiple monitors

Hi Guys,
I've run in to a bit of an issue with my MP. I run three monitors off two GT120 cards. They work great in OSX and did work fine in Win7. We've just moved and when Ifired up the mac again at the new place the three monitors work fine in OSX still but when I bootcamp in to Win7 it will only work with one monitor if I power up the other two it either rearranges the screens around of blanks them all so that I end up with a black screen that I can move the mouse pointer around on and the other screens say they have no input and switch off. Occasionally win7 shuts down completely!
It's got me baffled.......I don't know windows that well to start rummaging around too much and OSX is working fine so the hardware is OK. HELP!!
Cheers
Mike
P.S. Everything is up to date.............in fact nothing has changed since the whole set-up was moved to the new house.

I think I have it worked out. I put the Kona card in "input passthrough" mode and all seems to work just fine. I had it in MacIntosh desktop and that was causing my problem
If any other suggestions I am sure open to them.
Thanks
John

Help with Audio Playback While Recording

I am an aspiring sound engineer and I am having a problem with recording in Audition 3.0 that I need help with. When i record vocals, the sound wave plays back in the speakers/headphones with like a 1.5 second delay after it is recorded. It really throws off the artists I am working with when they are trying to record vocals. How do i kill headphone/speaker playback while someone is recording?

There are problems with a lot of internal soundcards in a lot of laptops, and these seem to be so many and various that all you can do is use trial and error and hope for the best.
External soundcards should cure any problem, but you may have to look into what else is running on the laptop, as so much is integrated, and some machines seem to have audio problems caused by wireless or other network adaptors etc.
As I said, I use oldish Edirol and Tascam usb units. The Tascam has a known fault (noise when using a guitar channel at the same time as phantom powering a mic on the other channel) which I can live with, and I would hope has been solved in later and current versions. The Edirol is fine. I use 2 units to give me the connections I want (ie one has jacks, the other phono plugs, and different size headphone sockets). Both these have asio and wdm drivers and work fine with AA 3.0 here. More modern devices will be usb2 and will presumably provide more channels or higher sampling rates, but these are fine. Others will be more up to date than me, but I would think anything from Tascam, Edirol, Echo Audio and I think most m-audio models should be fine. Just be wary of anything from Creative Labs. I, too, have had bad experiences with one of their products (it drew too much current from the usb port on a couple of the laptops so I never got as far as to find whether it had asio drivers working or not). But others will be more up to date than I am.
I just went onto ebay over the years and kept bidding on sensible looking devices until I got ones at the right price, but it probably is better to buy new if you can afford it.
Sorry I can't give a more definite answer.

Need help with audio...

Hi,
I need some help with an audio issue...a deep, buzzing sound which is so dominant, i can barely hear the rest
the situation:
older VHS tape (about 10 years) - i know some of you just cringed the video quality isn't the greatest, but not the worst. the audio is terrible.
transferred with my canopus av300 to my mac (g4 d1.25) - no issues
using FCP 4.5
i tried the AUGraphicEQ and since it was so deep, i reduced the following to 0:
800
6300
8000
reducing anything else doesn't seem to work
i've also tried cleaning in soundsoap both before using the AUGraphicEQ and after. If i clean it with SSoap before AUGraphicEQ, it sounds far better than the original track, but a low buzz is still present. using the EQ again doesn't seem to do much.
the camerawork was done on a tripod about 30 yds back. no mikes were used either. just the camera capturing both a/v.
Any thoughts on anything else to try? Any other filters? I fear the buzz is just with the main sound and no chance of completely killing it.
I can email someone a small sample file for them to play with if you like.
i'm really at my wits end b/c i would like to ensure i give the client as best i can (the other option would be to send the tape to a colleague's audio expert, but the price is something my client doesn't want to pay
Cheers,
Keebler

Got SoundTrack Pro? It will perform miracles with getting rid of unwanted sound. It's a matter of isolalating a few frames of the sound where no one is talking, and then using a simple command to remove that sound by itself from the entire audio track.
There is a possibilty that the Hum remover in FCP 4.5 might help...
Jerry

Need help with audio transfer!

I'm having problems with audio in idvd. The problem is with clips that were pasted into an imovie project from a different imovie project. The idvd preview seemed fine, but when I burned my disk, the audio associated with the pasted clips was inaudible. The same problem occurred with clips that I had "shared" as a quicktime movie and then imported into idvd. Any help would be GREATLY appreciated. I'm a total amateur!

Got SoundTrack Pro? It will perform miracles with getting rid of unwanted sound. It's a matter of isolalating a few frames of the sound where no one is talking, and then using a simple command to remove that sound by itself from the entire audio track.
There is a possibilty that the Hum remover in FCP 4.5 might help...
Jerry

Please help with audio problems, thanks!

Hi, I'm relatively new to DVD studio Pro and so far the manual has been useful but i've run into some sound related problems. I'm a composer/sound designer and this DVD is to be my reel so these are fairly integral issues to its success.
First, I want to add a sound effect to each of the roll over states, so one sound for the "over" and one sound for the "down" state. Currently i can only add audio as the backing track for each menu.
Second, whilst most of the items on the dvd are movies that include my music, I also want to have a page purely of audio tracks which play when pressed without changing the page. How can i do this? The only DVD i've seen this done on is "The Thin Red Line" extras, promoting the soundtrack to the film.
Thanks.

Welcome to the forum/discussions CC!
Sorry to have to inform you, but unfortunately layered menus aren't supporterd with audio in DVDSP, and technically what you're attempting is a layered menu-type function - although it just may be possible with scripts, I doubt it.
Your second request can be done however and there's several ways to go about doing it.
I like DVD@ccess but others would recommend a method of simply placing the audio files in the built file of the DVD making them accessible to users.
Another method I could suggest is to make a menu page exactly like the one you want to look the same and have the song you'd like to play as the music track for that duplicated-menu in question - set the target of the link for the song in the menu to go to the menu that has that song as the music track. Repeat that for the number of songs you'd like to have this feature.

Help with audio and sound tracks

I have a .mov file with audio. I added a sound file I downloaded and it plays fine with QT and I hear both tracks, the recorded audio and music in the background. But when I post to Youtube the added sound doesn't play. How can I combine both tracks into one? I've tried exporting but can't seem to get the added track to play.
Using QT Pro 7.6.4 and Leopard.

http://www.discoverynet.com/~ajsnead/alpcond/alpha_18/midi/rocky.mid
It's a MIDI file:
http://en.wikipedia.org/wiki/MusicalInstrument_DigitalInterface
In order to use it at YouTube you would required to convert it prior to adding it in your source file to a real "audio" format.
This is why it didn't play after the export and wasn't converted by YouTube.

Help with Audio Settings

I'm a neophyte when it comes to audio recording. My projects
are software demos with a few PowerPoint slides for introduction
and wrap-up. After I record the PowerPoint show and the on-screen
demo action, I use a headset/microphone to record narration for
each C3 slide in the project.
Is there a good description/discussion somewhere of the
various settings in the Captivate "Audio settings" dialog box?
In particular, what do "Encoding Bitrate", "Encoding
Frequency", and "Encoding Speed" mean? And what effect does
changing each of them have on the sound quality and file size (both
when I'm recording the audio and when I publish the movie)? What
settings would be best for "voice-over" narration? (I do not use
background music.)
The C3 online help for this dialog box isn't much help at
all. For example, here's all that it says about "Encoding
Frequency" and "Encoding Speed":
= = = = = = = = = =
Encoding Frequency
Select the frequency at which audio encoding must be
performed.
Encoding Speed
Drag the slider bar to set the required audio encoding speed.
Increasing the encoding speed reduces the quality of the encoded
files.
= = = = = = = = = =
That's a bit like saying "In your car, the brake pedal is
used to apply the brakes" without saying that you apply the brakes
to stop the car.
I'd appreciate any and all insight you can share on this
subject, and/or references to things I should read to learn about
these.
Thanks,
Bill

i hate to rain on everyone's parade here but this problem lies elsewhere and not with the photo-jpeg video.
i was given several drives chock full of offline rt video and it plays fine out to my monitor. video was captured at offline rt preset resolution (320x240 photojpeg, square par), sequences are offline rt, control is apple dvcpro firewire to a jvc br-dv600ua vtr.
granted, the video looks less than desireable but it's useful none-the-less. i forgot to mention that this in a fcp 4.5 project on my panther boot drive.
perhaps the original poster will give some more info to help nail down the problem. or maybe my quicksilver system doesn't know it isn't supposed to display offline rt video.
zeb

Volume gain fluctuation problem in iPad(random decreasing/increasing volume) with audio monitoring enabled.

I have one bass track and a drums track picked from loops and when playing the guitar(iPad2 with apogee jam connected) with monitoring enabled I get gain fluctuation problems(random decreasing/increasing volume, some times mute). When I stop playing the guitar audio feedback gets back to normal.
Any idea?

Hi George Ward2
I'm wondering if you accidentally or unintentionally locked the audio in a segment/s where you intended to fade up or down. Altho you say it plays fine when you review it in iMovie. The place to review it is in iDVD. However adjustments are made in iMovie for the actual audio and video. Here's what I found in the Help Menu for iMovie since there isn't much info on the iDVD portion of the help menu for the same symptoms:
Making your movie louder or softer:
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Just out of curiosity .... is the source audio 12 bit or 16 bit?
Hope this is helpful and good luck.
SDMacuser

Help with Audio Monitoring

Similar Messages

Maybe you are looking for