Help With Factory Reset

I ran over my Blackberry Tour, rendering the screen unusable.
I can access the device from Desktop Manager, and I can run exe.Autoloader/factoryreset from the Windows command prompt.
However, this does not remove the Verizon phone number from the device. Verizon won't work with the phone because the screen is cracked.
What's the correct way to wipe the Verizon data from the command prompt?

Are you going to get a new device from Verizon? Once you get another device you can just dial *228, then choose option 1 to program the phone. that will move your # to the new device. Until then you can ask Verizon to suspend your number
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

Help with Factory Reset on Toshiba Satellite C845

It's just a doubt.
I have a HDD (Toshiba Hard Drive 930 GB)
And i used it to make a USB Recovery Partition.
Now, with this done, can i Restore my pc to Factory settings (Startup and F12 process)?
I mean erasing EVERYTHING, and restoring it with the recovery partitions in my Hard Drive?
Toshiba Satellite C845
Intel(R) Core(TM) i3-2328M CPU @ 2.20 GHz 2.20 GHz
64 bits, x64
Windows 8 Single Language
Oh! and another thing, can i use my HDD to save the recovery partition AND my other stuff like music and videos?

Yes and/or you can do it from windows. select the charms, then settings, change pc settings, update and recovery, recovery. The descriptions tells you what each option does -see picture:
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Problems with Factory Reset on EPC3925

After performing a factory reset on my router, I am unable to log into the router in order to set up or change my wireless settings.
The default admin/password login does not work (I've tried all combinations), and I am only able to login as a guest user (blank username/password), which does not let me change any settings.
It is also stuck on bridged mode (router page is 192.168.100.1 instead of 192.168.0,1), which I am unable to change both due to both the lack of admin account as well as the fact that the factory resets do not revert it to router/non-bridged mode.
Any help at all on how to log in and change these settings would be very much appreciated -- thanks!

Hi CheshireCat and Welcome to the Cisco Home Community.
The EPC/DPC3925 is an internet service provider (ISP) supported product. In other words you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
However I did a search and found the DPC3925/EPC3925 manual that may help you: http://manual.upc.ro/pdf/epc_3925.pdf
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Problem with factory resetting Airport Express

I am trying to do a hard factory reset my airport express. I want to reset it to the factory default so that I can change the settings so that it connects to my comcast wirless modem. I followed the instructions on the apple support site. I held the reset button will the device was unplugged and then plugged it in while still holding the reset button. I held it until the green light flashed four times. But the stupid thing will not reset at all. Just the same blinking orange light. No green light. And of course, non identifiable on airport admin utility. This is really frustrating. Anyone know how to solve this problem.
Thanks

I have the exact problem described by AKAPLG. I've tried EVERYTHING with no good result.
- My network does NOT show up in AirPort Utility (and even the old Airport Admin Utility)
- Even after hard reset I can still see the old name of my network but am still unable to join it.
- I've tried connecting directly with Ethernet to my MacBook Pro, but it is unclear what I'm supposed to do next, the manual doesn't mention this at all. When it's connected I do not see my AX in the AirPort Utility menu when I rescan.
- The "Factory Reset" described by the booklet that came with the 802.11n device is inconsistent with what I see when I try it. I get a single green blink followed by a long solid yellow (sorry Amber) followed by blinking amber. I never see 4 green blinks, as described.
This is the worst Apple experience I've ever had. Period. Any more advice please before I take this POS back to the store and trade it for a punch in the ribs or a hot stick shoved in my eye?
Message was edited by: jpembert

Help with a resetting running total

Hi, I need help with a query that will have a running total that resets at certain points
Version
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production sample data
create table t ( stat varchar2(3)
               , beg_dt date
               , end_dt date
               , dur    number);
Insert into t values ('ACT',to_date('01-JUL-2012','DD-MON-YYYY'),to_date('31-JUL-2012','DD-MON-YYYY'),31);
Insert into t values ('ACT',to_date('01-AUG-2012','DD-MON-YYYY'),to_date('31-AUG-2012','DD-MON-YYYY'),31);
Insert into t values ('ACT',to_date('01-SEP-2012','DD-MON-YYYY'),to_date('30-SEP-2012','DD-MON-YYYY'),30);
Insert into t values ('LOA',to_date('01-OCT-2012','DD-MON-YYYY'),to_date('25-OCT-2012','DD-MON-YYYY'),25);
Insert into t values ('LOA',to_date('26-OCT-2012','DD-MON-YYYY'),to_date('31-OCT-2012','DD-MON-YYYY'),6);
Insert into t values ('LOA',to_date('01-NOV-2012','DD-MON-YYYY'),to_date('04-NOV-2012','DD-MON-YYYY'),4);
Insert into t values ('ACT',to_date('05-NOV-2012','DD-MON-YYYY'),to_date('10-NOV-2012','DD-MON-YYYY'),6);
Insert into t values ('LOA',to_date('11-NOV-2012','DD-MON-YYYY'),to_date('30-NOV-2012','DD-MON-YYYY'),20);
Insert into t values ('LOA',to_date('01-DEC-2012','DD-MON-YYYY'),to_date('15-DEC-2012','DD-MON-YYYY'),15);
Insert into t values ('ACT',to_date('16-DEC-2012','DD-MON-YYYY'),to_date('31-DEC-2012','DD-MON-YYYY'),16);
Insert into t values ('LOA',to_date('01-JAN-2013','DD-MON-YYYY'),to_date('31-JAN-2013','DD-MON-YYYY'),31);
Insert into t values ('LOA',to_date('01-FEB-2013','DD-MON-YYYY'),to_date('05-FEB-2013','DD-MON-YYYY'),5);
Insert into t values ('LOA',to_date('06-FEB-2013','DD-MON-YYYY'),to_date('15-FEB-2013','DD-MON-YYYY'),10);
Insert into t values ('LOA',to_date('16-FEB-2013','DD-MON-YYYY'),to_date('25-FEB-2013','DD-MON-YYYY'),10);
Insert into t values ('LOA',to_date('26-FEB-2013','DD-MON-YYYY'),to_date('28-FEB-2013','DD-MON-YYYY'),3);
Insert into t values ('LOA',to_date('01-MAR-2013','DD-MON-YYYY'),to_date('10-MAR-2013','DD-MON-YYYY'),10);
Insert into t values ('ACT',to_date('11-MAR-2013','DD-MON-YYYY'),to_date('31-MAR-2013','DD-MON-YYYY'),21);
Insert into t values ('ACT',to_date('01-APR-2013','DD-MON-YYYY'),to_date('30-APR-2013','DD-MON-YYYY'),30);
Insert into t values ('LOA',to_date('01-MAY-2013','DD-MON-YYYY'),to_date('25-MAY-2013','DD-MON-YYYY'),25);
Insert into t values ('LOA',to_date('26-MAY-2013','DD-MON-YYYY'),to_date('31-MAY-2013','DD-MON-YYYY'),6);
Insert into t values ('LOA',to_date('01-JUN-2013','DD-MON-YYYY'),to_date('04-JUN-2013','DD-MON-YYYY'),4);
Insert into t values ('ACT',to_date('05-JUN-2013','DD-MON-YYYY'),to_date('30-JUN-2013','DD-MON-YYYY'),26);This is close.
select stat
    , beg_dt
    , end_dt
    , dur
    , sum( case stat when 'LOA' then dur else 0 end ) over ( partition by stat order by beg_dt) tot1
from t
order by beg_dt
STAT BEG_DT      END_DT      DUR TOT1
ACT 01-JUL-2012 31-JUL-2012 31    0
ACT 01-AUG-2012 31-AUG-2012 31    0
ACT 01-SEP-2012 30-SEP-2012 30    0
LOA 01-OCT-2012 25-OCT-2012 25   25
LOA 26-OCT-2012 31-OCT-2012   6   31
LOA 01-NOV-2012 04-NOV-2012   4   35
ACT 05-NOV-2012 10-NOV-2012   6    0
LOA 11-NOV-2012 30-NOV-2012 20   55
LOA 01-DEC-2012 15-DEC-2012 15   70
ACT 16-DEC-2012 31-DEC-2012 16    0
LOA 01-JAN-2013 31-JAN-2013 31 101
LOA 01-FEB-2013 05-FEB-2013   5 106
LOA 06-FEB-2013 15-FEB-2013 10 116
LOA 16-FEB-2013 25-FEB-2013 10 126
LOA 26-FEB-2013 28-FEB-2013   3 129
LOA 01-MAR-2013 10-MAR-2013 10 139
ACT 11-MAR-2013 31-MAR-2013 21    0
ACT 01-APR-2013 30-APR-2013 30    0
LOA 01-MAY-2013 25-MAY-2013 25 164
LOA 26-MAY-2013 31-MAY-2013   6 170
LOA 01-JUN-2013 04-JUN-2013   4 174
ACT 05-JUN-2013 30-JUN-2013 26    0 I need a running total of LOA stat that will reset itself with each break of ACT so that I get :
STAT BEG_DT      END_DT      DUR TOT1
ACT 01-JUL-2012 31-JUL-2012 31    0
ACT 01-AUG-2012 31-AUG-2012 31    0
ACT 01-SEP-2012 30-SEP-2012 30    0
LOA 01-OCT-2012 25-OCT-2012 25   25
LOA 26-OCT-2012 31-OCT-2012   6   31
LOA 01-NOV-2012 04-NOV-2012   4   35
ACT 05-NOV-2012 10-NOV-2012   6    0
LOA 11-NOV-2012 30-NOV-2012 20   20
LOA 01-DEC-2012 15-DEC-2012 15   35
ACT 16-DEC-2012 31-DEC-2012 16    0
LOA 01-JAN-2013 31-JAN-2013 31   31
LOA 01-FEB-2013 05-FEB-2013   5   36
LOA 06-FEB-2013 15-FEB-2013 10   46
LOA 16-FEB-2013 25-FEB-2013 10   56
LOA 26-FEB-2013 28-FEB-2013   3   59
LOA 01-MAR-2013 10-MAR-2013 10   69
ACT 11-MAR-2013 31-MAR-2013 21    0
ACT 01-APR-2013 30-APR-2013 30    0
LOA 01-MAY-2013 25-MAY-2013 25   25
LOA 26-MAY-2013 31-MAY-2013   6   31
LOA 01-JUN-2013 04-JUN-2013   4   35
ACT 05-JUN-2013 30-JUN-2013 26    0 Any help would be appreciated, thanks.

Hi,
So, you want a separate total whenever there's an 'ACT'. That's what PARTITION BY is for. You need to add the number of ACTs already encountered (which I called act_cnt) to the PARTITION BY clause that gets you the SUM.
We can get act_cnt using the analytic functions like COUNT or SUM, but, since one analytic function can't depend on another computed inthe same query, we need to use a sub-query to compute act_cnt.
Here's one way:
WITH     got_act_cnt     AS
     SELECT     stat, beg_dt, end_dt, dur
     ,     COUNT (CASE WHEN stat = 'ACT' THEN 1 END)
              OVER (ORDER BY beg_dt)   AS act_cnt
     FROM    t
SELECT       stat, beg_dt, end_dt, dur
,       SUM (CASE stat WHEN 'LOA' THEN dur ELSE 0 END)
         OVER ( PARTITION BY stat
                 ,                act_cnt     -- ***** NEW *****
             ORDER BY      beg_dt
           )       AS totl
FROM      got_act_cnt
ORDER BY beg_dt
;Are 'ACT' and 'LOA' the only possible values for stat? If so, the query above can probably be simplified.

Help Please -Factory Reset Failed on HP Envy

Recently my laptop touch screen suffered from extreme "ghost touches" that made the laptop basically unusable until I disabled the human interface and only used the mouse. I went to a popular computer site that walked me through numerous detailed scans and determined it was not a malware/virus issue. So, I tried a system restore and that didn't help. Next step was a factory image reset using the recovery disks that I made upon purchase. After 3 tries the reset continues to fail. It always looks promising and gets to the "Administrator welcome" screen but then goes back to "software installation" eventually ends up at the "Restoration Incomplete" screen. When I try to save the log detail to a DVD it says there's not enough free space even though it's a blank 4.7GB disk. I took a pic of the log (attached) if that helps. On a side note during the "Software installation' process the frame blinked randomly and what appeared to be drop down menus opened randomly for split seconds in the background... none of which appeared kosher to me - but I'm no tech expert. I do have an extended warranty and may end up having to send it in but would prefer to fix here if possible. I love this laptop and am at a total loss here - thanks for any help/advice!

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you.
Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Case number and phone number appear.
They will be happy to assist you immediately. Thanks.

Help with cold reset for M1536dnf

hey i Have a password protected printer too could you help me to get it off. Thanks.

Hi @MPCREATIONS,
I see by your post that you would like the password reset on the printer. I can help you with this.
Please check your private messages for the reset for the printer.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Help to factory reset iMac 2009

I need help to reset to factory settings my iMac 2009 please

You can try this:
https://discussions.apple.com/thread/2217185?tstart=0
Steps to cure:
1) Shutdown iMac
2) Unplug power cord from back of iMac
3) Press and hold power button for 20 seconds
4) Restore power cord; power on iMac
5) Immediately on hearing Startup Chime, press and hold Command-Option-P-R keys (⌘⌥ P R)
6) Wait until you hear an additional four (4) chimes; the fourth (fifth) chime will (should) be louder and clearer
7) Release the keys and allow iMac to boot normally.
Note: This reboot may take up to two minutes, but subsequent reboots should be less than 30-45 seconds.
Results:
 Boot time 35 seconds
 super snappy app/window behavior (especially Parallels/Windows and Safari/Flash
 New Xbench Score = 286.24 (must admit I thought this would be higher)
 Super Happy owner of the hands-down, most kickass screen on the planet

Need help with Password reset

I have tried to reset my password and I do not recieve the email for this reset. I have had an issue with verifiying my account also as the email for the verification does not get sent to my account either. This has been going on for quite sometime. I have call support and they were of no help. I just want your systems to see my email address so I can log in.

Hello cisconetdude,
Managing your account information on BestBuy.com should be pretty easy, so I'm disheartened to hear that you've had the difficulties you describe. This is not the experience that we want you to have!
I'll be happy to look into this situation for you, but will need you to confirm some information to begin. Please watch for a private message from me with that request. To check your forum inbox, ensure that you have signed in with your user name and password, then click on the envelope icon in the upper right of this page.
I'm grateful that you brought your circumstances to our attention.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

No memory left, help me factory reset my mac air

So checked my memory today and it says i have ~500MB free. unfortunately 100Gigs of it is being used by other and i don't understand what it is. Im ASSUMING my games (World of warcraft and League of Legends) is a fair chunk of that because none of the other categories exceed 30gigs which is (roughly) the size of WoW.
I purchased a 1TB external not too long ago and was originally just going to keep big files on it when I'm not using them. However seeing as i only have 500MB left I would like to just put everything on my external, factory restore my mac, then just go through what i NEED/WANT on my mac and just bring it over. I would just like a little bit of help through this process as I'm not 100% sure of anything i might be overlooking. this should work right?
Also I've never used time machine but when i plugged in my external it asked if i wanted to use time machine for it and i clicked yes because I'm assuming this is basically what I'm trying to do, back up everything on my external, but then again i have no knowledge of time machine so I'm not entirely sure if this is what i want. Is it going to just put everything on my external, then when i restore it will it just bring back everything from the external and put it on my macs internal drive? because... thats the complete opposite of what I'm trying to do.
Anyways, I could really use some help. Big thanks in advance

Describes, "Other" > OSX Tips The Storage Display
Freeing space on your Mac OS X startup disk
I think you may be confusing memory (RAM) with storage space.
To see how much RAM is installed, click the Apple  top left in your screen. From the drop down menu click: About This Mac
For storage space. Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.

HT1212 help me factory reset my iphone4

in need of reseting my iphone 4 it has on it disable connect to i tunes

1. Connect your iPhone to your computer.
2. Open iTunes on your Mac/PC.
3. Select your iPhone in the upper right hand corner.
4. In the summary pane, click restore. If you haven't backed up your iPhone in 2 or more weeks, this will erase all data.
5. Click restore.
6. Read the Terms and Agreements, then tap agree.
7. Your iPhone will be restored to factory.

Help with ipod reset

Hello, I have an old Ipod and want to reset it for my little niece's new toy for Christmas. Someone has put in a password (not me) and not a clue what it is. I followed the instructions to reset it, but it is stuck. I have iTunes open, and the screen with the iTunes logo and the chord is on the screen. but then nothing!!!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

PLEASE HELP WITH SIMPLE RESET QUESTION!!!

This is probably extremely simple to resolve...my Nano is not syncing with my computer any more. I thought I should try resetting it. I looked at the manual and pressed MENU and the CENTRE BUTTON at the same time and waited for the Apple logo to appear. I tried several times but it did not work!
WHAT AM I DOING WRONG, PLEASE??

When you restore the ipod, you need to press the menu and select (centre) button together for about 6 seconds. Try to be sure that your finger on the centre button does not touch the wheel part, and that the one on the menu button is closer to the outside edge.
This page has more information http://support.apple.com/kb/HT1320

Help with password reset on g3 wallstreet

hi there i got ag3 wall street with os 8.5 and it has a password on it which i have forgotten. I have the os 8.5 disk and have been trying to find out how to reset the password with no luck on Google so this is my last resort should have came here first.

If not, the question will be, "Does the password request come up almost instantly, implying open firmware locked, or after about a minute or more, and after the "parade of startup Icons", implying a Multiple Users or At Ease password?"

Help with Factorial Calculations

Hi,
I've got the following sample code for getting the Factorial of a number. It works fine for small numbers but I need it to handle larger ones (eg 365! ). Any suggestions for how to get it to work :
public class Fac
public static void main(String[] args)
int n = (whatever number I wish to put in);
System.out.println(n + "! = " + factorial(n));
Calculates the factorial of an integer by re-running
through itself until it's down to 0.
public static int factorial(int n)
{ if (n == 0)
return 1;
else
{ int result = n * factorial(n - 1);
return result;
Cheers
Kat

Factorials tend to become very large. The java datatype that stores the largest numbers is double. The maximum value a double can store is about 1.8e308, which is only sufficient to store factorials up to 170, not the ones you are talking about.
Since doubles cannot store factorials 171 and up, a java datatype is no option, you need java objects. The most likely candidate for such large numbers will be the java.math.BigInteger class. This is what you could do :
BigInteger value = BigInteger.ONE;
for(int i=2; i<=n; i++)
value = value.multiply(new BigInteger(""+i));
System.out.println(""+n+"! = "+value.toString());
To my knowledge, there is no upper limit on the size of a BigInteger object, so in theory you could make the calculation for any given number.

Help With Factory Reset

Similar Messages

Maybe you are looking for