Help with ICH and IOH heat sink change

Dear friends,
I apologize for my lack of knowledge, I am a new builder.  I own a Mobo eclipse sli.  I received it with out a pin which holds the IOH heat sink, that is joined with heat pipes with the ICH (I think).  Also, I have read the last post regarding the temperature increase in the ICH and IOH due in part for the poor thermal solution in this MOBO. 
I have to say that I resolved the first part of the problem, this is getting some push pins better than the original. However, taking into account the different posts, I had thought in changing the original thermal solution for a better one. Therefore, I got a thermal solution from thermalright  for the chipset. 
My question is: the thermal solution I got is apparently only for the IOH, if I remove the original heatsink from the IOH, I have to remove also the heatpipes ? and What happens with the heatsink from the ICH, it stay alone without the heatpipes? It is dangerous for the ICH?
The thermal solution I got is the HR-05 SLI/IFX
http://www.thermalright.com/new_a_page/product_page/chipset/hr05_sli_ifx/product_chitset_cooler_hr05_sli_ifx.htm?art=MTQyMywxLCxoZW50aHVzaWFzdA==
I am confused about that.
Please help me,
Santiago

Thanks four your replies.
So, In conclution I have to buy another one chipset cooler? It is ok?  In that case I am going to change first the thermal paste of the stock heat sinks.  If it doesn´t work I will change by the two chipset Thermalright solution.  It it works I think I will test my computer some time before changing the complete chipset thermal solution.
For my cpu I bought the solution offered by gelid solutions,
http://www.gelidsolutions.com/products/index.php?lid=2&cid=12&id=32
I have two case fans in adition.
I hope everything will be ok.  I am just waiting for my Corsair dominator 6GB, I live in Ecuador so I had to wait some time until the components come from the US.
Thanks
Santiago

Similar Messages

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

  • Help with count and sum query

    Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
    SELECT 'ST' LEDGER,
    CASE
    WHEN c.Category = 'E' THEN 'Headcount Exempt'
    ELSE 'Headcount Non-Exempt'
    END
    ACCOUNTS,
    CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
    'MARCH_12' AS PERIOD,
    COUNT (a.empl_id) head_count
    FROM essbase.employee_pubinfo a
    LEFT OUTER JOIN MMS_DIST_COPY b
    ON a.cost_ctr = TRIM (b.bu)
    INNER JOIN MMS_GL_PAY_GROUPS c
    ON a.pay_group = c.group_code
    WHERE a.employee_status IN ('A', 'L', 'P', 'S')
    AND FISCAL_YEAR = '2012'
    AND FISCAL_MONTH = 'MARCH'
    GROUP BY a.company,
    b.district,
    a.cost_ctr,
    c.category,
    a.fiscal_month,
    a.fiscal_year;
    which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

    Hi,
    Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
    Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
    user610131 wrote:
    ... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
    I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
    You may want both a sub-query and a different GROUP BY clause. For example:
    WITH    got_group_by_columns     AS
         SELECT  a.empl_id
         ,     CASE
                        WHEN  c.category = 'E'
                  THEN  'Headcount Exempt'
                        ELSE  'Headcount Non-Exempt'
                END          AS accounts
         ,       CASE
                        WHEN a.company = 'ZEE'
                        THEN 'OH'
                        ELSE 'NA'
                END          AS market
         FROM              essbase.employee_pubinfo a
         LEFT OUTER JOIN  mms_dist_copy             b  ON   a.cost_ctr     = TRIM (b.bu)
         INNER JOIN       mms_gl_pay_groups        c  ON   a.pay_group      = c.group_code
         WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
         AND        fiscal_year           = '2012'
         AND        fiscal_month          = 'MARCH'
    SELECT    'ST'               AS ledger
    ,       accounts
    ,       market
    ,       'MARCH_12'          AS period
    ,       COUNT (empl_id)       AS head_count
    FROM       got_group_by_columns
    GROUP BY  accounts
    ,            market
    ;But that's just a wild guess.
    You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
    Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

  • I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

  • MOVED: [Athlon64] Need Help with X64 and Promise 20378

    This topic has been moved to Operating Systems.
    [Athlon64] Need Help with X64 and Promise 20378

    I'm moving this the the Administration Forum.  It seems more apporpiate there.

  • I dropped my iphone 3G last day and soon after the display became very dim and it still remanins the same..Could anyone pls help with a solution? Should I change the display or is it a minor damage?

    I dropped my iPhone 3G last day and soon after that the display turned too dim and it still remains the same.
    Could anyone help me with a solution?
    Should I change the display or is it a minor damage??
    Thanks for your support

    sounds like you broke the display when you dropped it.  There's nothing we users here can do for you.
    Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced.  You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

  • HT1918 I can't change my country/region with iTune and therefore can't change my method of payment. Help.

    I can't change my country/region on iTunes and therefore can't change my payment information. I've moved from Canada to Australia and am now using an Australian credit card.
    On my device I've gone into settings>iTunes &app store> Apple ID > view Apple ID > country/ region > change country/region. When I try tapping on this last icon, nothing happens. It doesn't give an option to change.
    I've also updated my address with apple.

    Hey there Sheava,
    It sounds like you are trying to change your country in the iPhone settings but when you get to the last step, nothing happens. I would start by closing all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and try changing the country again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, try signing out of your account in settings, then restart one more time, sign back in and try to change the country again.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Help with encapsulation and a specific case of design

    Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
    I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
    1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
    2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
    Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
    http://www.immortalcoil.org/drake/Code.zip
    The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
    -  There are a bunch of kanji.
       Each kanji is defined by:
       -  a single character (the kanji itself); and
       -  multiple readings which fall into two categories of "on" and "kun".
          Each reading is defined by:
          -  A string of hiragana or katakana (Japanese phoenetic characters); and
          -  Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
    -  A Vector that holds:
       -  custom KanjiEntry objects that each hold
          -  a kanji in a primitive char value; and
          -  two (on, kun) arrays or Vectors of custom Reading objects that hold
             -  the reading in a String; and
             -  statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
    Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
    theKanjiEntry.setStatistic(
    "on",   // which set of readings
    2,      // which element in that array or Vector
    "score", // which statistic
    98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
    My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
    A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
    Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
    Any help would be appreciated.
    Drake

    Usually by better design. Move methods that use the
    getters inside the class that actually has the data....
    As a basic rule of thumb:
    The one who has the data is the one using it. If
    another class needs that data, wonder what for and
    consider moving that operation away from that class.
    Or move from pull to push: instead of A getting
    something from B, have B give it to A as a method
    call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
    Solution 1 (disfavored):
    public class kanjiDrill{ // a chunk of Swing GUI or something
         public void runDrill(Vector kanjiEntries){
              KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
              char theKanji = currentKanjiEntry.getKanji();
              String theReading = currentKanjiEntry.getReading();
              // build and show a flashcard based on theKanji and theReading
              // use a setter to change currentKanji's data based on whether the user answers correctly;
    }Solution 2 (favored):
    public class kanjiDrill{ // a chunk of Swing GUI or something
         public void runDrill(Vector kanjiEntries){
              KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
              currentKanji.buildAndShowFlashcard(); // method includes updating stats
    }I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
    In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
    My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
    It's not really a setter. Outsiders are not setting
    the items price - it's rather updating its own price
    given an argument. This is exactly how it should be,
    see my above point. A breach of encapsulation would
    be: another object gets the item price, re-calculates
    it using a date it knows, and sets the price again.
    You can see yourself that pushing the date into the
    item's method is much beter than breaching
    encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
    Thanks for the help.
    Drake

  • Help with Facebook and Social Media wigets (Was: How do I fix the three probs that...)

    I am having problems with the facebook or social media widgets. I would like the link to send viewers to my facebook business page, but when testing it shows my pic and a 'switch' sign (see screen shot) and when I open the site the message is as the other screenshot, great, but I don't know where to find which 'asset' is the problem and why. Also why bother having child pages if the menu doesn't reflect that? I see that drop down menus are an issue, also with some other forum members.
    Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
    For some reason the facebook widget now loads the correct page, and I give up about the drop down menu, hopefully this will be addressed in the next update of Muse??

    Hello,
    For the "asset" issue, try locating the asset in the assets panel. It should have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
    For the child pages in the menus issue, go to the menu options (by clicking the small blue arrow in the right top corner of the menu), and then change the menu type to "All Pages" instead of "Top Level Pages".
    Hope this helps.
    Cheers
    Parikshit

  • Help with WindowsDesktopSSO and AMIdentity.getAttributes

    Hi guys and girls,
    I need some help from you experts.
    I successfully setup, thanks to this guide
    http://blogs.oracle.com/knittel/entry/opensso_windowsdesktopsso
    and a lot of trial & errors and googling a Kerberos authentication between OpenAM version 9.5.2 and an Active Directory Server.
    When I navigate to openAM page (from a domain machine) http://<openAMhost>:<port>/opensso, it doesn't ask for credentials ...
    and I can see, with ieHttpHeaders, kerberos data exchange.
    Without creating an Active Directory DataStore (pointing to the same domain where I use kerberos data) in openAM,
    when I navigate (from a domain machine) to /opensso/idm/EndUser page, it always gives me:
    "Plug-in com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist."
    Since my aim was to get user information from a web app ... I thought I could have done this with an agent/SDK call as I usually do with "classic" authentication.
    Now I created a J2EE Agent (on openAM) to protect one of my application deployed on a JBoss 4.2.1-GA server.
    Agent configured with default options and these changes:
    Agent Filter Mode: J2EE_POLICY
    User Mapping Mode: USER_ID
    User Attribute Name: tried both with employeenumber and uid
    User Principal Flag: enabled
    User Token Name: UserToken
    FQDN Check: tried both with enabled and disabled
    WebAuthentication Available : Enabled
    In my application WEB-INF/jboss-web.xml looks like this:
         <?xml version="1.0" encoding="UTF-8"?>
         <jboss-web>
              <security-domain>java:/jaas/AMRealm</security-domain>
         </jboss-web>Usually, when I authenticate with "classic" (internal datastore) login, I can get user attributes programmatically with a code like this:
           private String getCredenzialiUtente(HttpServletRequest request)
                String                 SSOUsername      = null;
                SSOToken               ssoToken      = null;
                SSOTokenManager        manager           = null;
                  try
                    manager = SSOTokenManager.getInstance();
                    if ( manager == null)
                         throw new RuntimeException("Unable to Get: SSOTokenManager");
                    String ssoTokenID = AmFilterManager.getAmSSOCache().getSSOTokenForUser(request);
                    ssoToken = manager.createSSOToken(ssoTokenID);
                    if ( ssoToken == null )
                          throw new RuntimeException("Unable to Get: TokenForUser");
                    AMIdentity amid = new AMIdentity(ssoToken);
                    if(amid == null)
                       throw new RuntimeException("Unable to Get: UserIdentity");
                    SSOUsername  = amid.getName();
                    System.out.println("######### USERNAME FROM SSO: " + SSOUsername);
                    Set<String> info = new HashSet<String>();
                    info.add("uid");
                    info.add("givenName");
                    java.util.Map mappa = amid.getAttributes(info);
                    if ( mappa != null )
                        java.util.Set insieme = mappa.keySet();
                        java.util.Iterator it = insieme.iterator();
                        while ( it.hasNext() )
                            String n = it.next().toString();
                            System.out.println( n + " ==> " + mappa.get(n) );
                    else
                        System.err.println(" DAMN - NO ATTR ");
              catch (Exception exception)
                exception.getMessage();
                exception.printStackTrace();
              System.out.println("OUT getCredenzialiUtente: " + SSOUsername);
              return SSOUsername;
            }        When I log to console with default "ldapService" module (outside the domain), I can get something like:
         2011-09-29 13:14:38,733 INFO  [STDOUT]  ####################################### USER = amadmin
         2011-09-29 13:15:32,250 INFO  [STDOUT] IN getCredenzialiLAit
         2011-09-29 13:15:32,260 INFO  [STDOUT] ######### USERNAME DA SSO: a2zarrillo
         2011-09-29 13:15:32,291 INFO  [STDOUT] uid ==> [a2zarrillo]
         2011-09-29 13:15:32,291 INFO  [STDOUT] givenName ==> [Antonio2]
         2011-09-29 13:15:32,311 INFO  [STDOUT] OUT getCredenziali: a2zarrillo
         2011-09-29 13:15:32,321 INFO  [STDOUT]  ####################################### USER = a2zarrillobut when i try to login from inside the domain (with kerberos, so no credentials) with a domain user, I get:
         2011-09-29 13:15:39,496 INFO  [STDOUT] IN getCredenzialiLAit
         2011-09-29 13:15:39,503 INFO  [STDOUT] ######### USERNAME DA SSO: tonyweb
         2011-09-29 13:15:39,550 ERROR [STDERR] Message:Plug-in  encountered an ldap exception.  LDAP Error 32: The entry specified in the request does not exist.
         2011-09-29 13:15:39,554 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         2011-09-29 13:15:39,560 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         2011-09-29 13:15:39,562 ERROR [STDERR]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         2011-09-29 13:15:39,566 ERROR [STDERR]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         2011-09-29 13:15:39,574 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.createResourceBasedException(SOAPClient.java:834)
         2011-09-29 13:15:39,575 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.endDocument(SOAPClient.java:800)
         2011-09-29 13:15:39,578 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.endDocument(Unknown Source)
         2011-09-29 13:15:39,582 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl.endEntity(Unknown Source)
         2011-09-29 13:15:39,587 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityManager.endEntity(Unknown Source)
         2011-09-29 13:15:39,592 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)
         2011-09-29 13:15:39,598 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.skipSpaces(Unknown Source)
         2011-09-29 13:15:39,600 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Unknown Source)
         2011-09-29 13:15:39,604 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         2011-09-29 13:15:39,607 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         2011-09-29 13:15:39,609 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         2011-09-29 13:15:39,613 ERROR [STDERR]      at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         2011-09-29 13:15:39,616 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         2011-09-29 13:15:39,621 ERROR [STDERR]      at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
         2011-09-29 13:15:39,625 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:343)
         2011-09-29 13:15:39,633 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:311)
         2011-09-29 13:15:39,636 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteServicesImpl.getAttributes(IdRemoteServicesImpl.java:229)
         2011-09-29 13:15:39,639 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteCachedServicesImpl.getAttributes(IdRemoteCachedServicesImpl.java:402)
         2011-09-29 13:15:39,642 ERROR [STDERR]      at com.sun.identity.idm.AMIdentity.getAttributes(AMIdentity.java:344)
         2011-09-29 13:15:39,645 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp.getCredenzialiUtente(MainPageJSP_jsp.java:63)
         2011-09-29 13:15:39,648 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp._jspService(MainPageJSP_jsp.java:217)
         2011-09-29 13:15:39,653 ERROR [STDERR]      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         2011-09-29 13:15:39,660 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         2011-09-29 13:15:39,664 ERROR [STDERR]      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
         2011-09-29 13:15:39,666 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         2011-09-29 13:15:39,669 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         2011-09-29 13:15:39,673 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         2011-09-29 13:15:39,676 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         2011-09-29 13:15:39,678 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,683 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
         2011-09-29 13:15:39,685 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
         2011-09-29 13:15:39,690 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         2011-09-29 13:15:39,697 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,701 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:687)
         2011-09-29 13:15:39,705 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469)
         2011-09-29 13:15:39,710 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403)
         2011-09-29 13:15:39,713 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
         2011-09-29 13:15:39,716 ERROR [STDERR]      at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:408)
         2011-09-29 13:15:39,725 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:442)
         2011-09-29 13:15:39,729 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:115)
         2011-09-29 13:15:39,730 ERROR [STDERR]      at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:178)
         2011-09-29 13:15:39,734 ERROR [STDERR]      at com.cid.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:92)
         2011-09-29 13:15:39,741 ERROR [STDERR]      at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:295)
         2011-09-29 13:15:39,744 ERROR [STDERR]      at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         2011-09-29 13:15:39,747 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         2011-09-29 13:15:39,750 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         2011-09-29 13:15:39,753 ERROR [STDERR]      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
         2011-09-29 13:15:39,761 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         2011-09-29 13:15:39,765 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,768 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._invokeDoFilter(CidWebUIFilter.java:239)
         2011-09-29 13:15:39,776 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._doFilterImpl(CidWebUIFilter.java:196)
         2011-09-29 13:15:39,780 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter.doFilter(CidWebUIFilter.java:80)
         2011-09-29 13:15:39,788 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         2011-09-29 13:15:39,793 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,797 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
         2011-09-29 13:15:39,803 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
         2011-09-29 13:15:39,807 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         2011-09-29 13:15:39,810 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,813 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
         2011-09-29 13:15:39,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         2011-09-29 13:15:39,825 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         2011-09-29 13:15:39,829 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
         2011-09-29 13:15:39,833 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         2011-09-29 13:15:39,836 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
         2011-09-29 13:15:39,843 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
         2011-09-29 13:15:39,846 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         2011-09-29 13:15:39,851 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
         2011-09-29 13:15:39,854 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
         2011-09-29 13:15:39,857 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         2011-09-29 13:15:39,860 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
         2011-09-29 13:15:39,862 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         2011-09-29 13:15:39,866 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
         2011-09-29 13:15:39,870 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         2011-09-29 13:15:39,874 ERROR [STDERR]      at java.lang.Thread.run(Thread.java:619)
         2011-09-29 13:15:39,877 INFO  [STDOUT] OUT getCredenziali: tonywebAs you can see I'm using the "sample" agentApp.war.     
    What am I missing ? It "crashes" as for getAttributes() call :/
    I thought it could be because I didn't setup LDAP DataStore ... so I set up Active Directory Data Store.
    While in openAM console (from outside domain) I can see (from Subjects tab) Active Directory users and relative information
    (like FirstName (=givenName), Surname (=sn), Full Name (=cn), etc.) ... when I try again with idm/EndUser (from a domain machine)
    I get the same error:
         Message:Plug-in  encountered an ldap exception.  LDAP Error 32: The entry specified in the request does not exist.What should I do now ?
    If you need more clarifications ... just ask :)
    Thank you in advance and sorry for the big post.
    Best Regards,
    Tony
    P.D. By the way, my OpenAM configuration does not create any "amAuthWindowsDesktopSSO.log" :(
    I setup, from opensso/Debug.jsp message level for Authentication ... but it still doesn't create this log ... can you please tell me how to let openAM write it ?
    Again thank you

    Weird enough, changing to ADAM data store (and not "standard" AD datastore) solved the problem :D
    I still wonder why since both plugins share the same java [implementing] class...
    Regards,
    Tony

  • Help with N8 and Adobe Premiere?

    Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
    I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
    The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
    When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
    I  then interpret the footage to the correct 25fps, and the video then works fine. However,  the sound seems to not be there.
    I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
    I also  tried changing the file into other formats. The only other one that  kind of worked was .mov. It allowed the sound to work perfectly, the  video loaded at correct frames, however, when playing the video on  premiere, it then showed black screen for most of the clip.
    Have  tried to find out about this online and installed a couple different  codec packs and media players, but nothing helped with this problem in  Adobe Premiere. However, the clip played fine in the media players, such  as RealPlayer.
    If anyone has any advice on this, it would be  appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
    Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
    *UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

    Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro?  Also what version of the Adobe Application Manager are you currently using?

  • Help with splitting and arranging clips

    Hi All,
    Can some please help a complete noob by explaining their simple workflow for FCE HD from after capture to edit.
    I am new to digital editing and am working my way through Tom's book but am a little confused in regards to arranging and organising my clips. I have a new project (My niece's 1st B'day party) which currently has 1 master clip (I think this is the terminology) with several (27) segments after running DV Start/Stop.
    This is where I get confused. I want to arrange the segments into Bins, for example: Birthday girl, cake, games etc... But there is something about relationships between master clip, segments and subclips which I don't understand.
    How is the best way to "cut up" (and is that the best way) the segments into smaller master clips so i can rename then, rearrange them and add comments in preperation for editing?
    Sorry for the long post, but when you don't really know what you want to say you end up saying a lot
    Cheers.
    Andrew

    I don't use the Master/Subclip relationships. My method of sorting out various types of clip, by subject (your examples of "Birthday girl, cake, games etc...") is to slide (click, hold and drag) all obviously bad clips into V3 and ignore (mostly), and then slide all the Birthday girl clips on to V2 and move them sideways to group them closer together, then do the same for each other group. This leaves in V1 some shots such as establishing shots, closeups of decorations, departures etc. which you know where to put (eg., establishing shots at the beginning, closeups cut in somewhere where suitable as the editing proceeds). Next, I drag down and left or right various clips from V2 to V1 to their appropriate positions in order, leaving gaps between here and there to avoid having to move sets of clips left and right too often to make room. Then I set In and Out points in the Timeline (or Viewer) and close gaps between the clips within each set and see how that set looks. When all the material has gone through that process I check the whole video and make (usually) minor) changes, then do transitions and set audio levels, then leave it for a few days to look at it afresh.
    Is this a bizarre method? What do you pros do?

  • Help with booleans and Buttons

    Hi,
    while ( repeat ) {
        tempValue = compMove.getRandomNumber();
        if ( nought.getUsedSquare(tempValue) ) {
            repeat = true;
        else if ( crosses.getUsedSquare(tempValue) ) {
            repeat = true;
        else {
            playButton[tempValue].setLabel("O");
            playButton[tempValue].setEnabled(false);
            nought.setSquareUsed(tempValue);
            repeat = false;
    }getUsedSquare(tempValue) - Should return true if button is used
    This code gets a random number in the range 0 to 8, and then uses this random number to check if a button has already been clicked and had its label changed using the getSquareUsed method. If the button has not been clicked then the label should be changed. Basically it is a Tic-Tac-Toe game.
    The problem is that sometimes the code will change the label on a button that has already been clicked.
    Why is this?
    Thanks for any help you can give.

    Alright:
    if ( event.getSource() == playButton[0] ) {
        playButton[0].setLabel("X");
        crosses.setSquareUsed(0);
        if ( crosses.checkForWin() )
            System.out.println("Crosses Win!");
        while ( repeat ) {
            tempValue = compMove.getRandomNumber();
            if ( nought.getUsedSquare(tempValue) )
                repeat = true;
            else if ( crosses.getUsedSquare(tempValue) )
                repeat = true;
            else {
                playButton[tempValue].setLabel("O");
                playButton[tempValue].setEnabled(false);
                nought.setSquareUsed(tempValue);
                repeat = false;
        repeat = true;
        if ( nought.checkForWin() )
            System.out.println("Noughts Win!");
        playButton[0].setEnabled(false);
    }That is the code i have for when the human player clicks on a button, the computer will make a random move, nothing intelligent about it (bit like me).
    I changed my coding for the getSquareUsed method to:
    public boolean getUsedSquare( int a ) {
       return squareUsed[a];
    }I know that the button is set as being used in the setSquareUsed method, but still the computer player will overwrite an already used square.
    Any ideas from this, or should i start again with something different?

  • Help with PS and HDR Effect Pro from Nik

    I altready have a help request into Nik Software, but was hoping someone here could offer some suggestions.
    I'm running the Nik Complete software program on Win 7 64Bit, Raid 5 machine. 8800 GTS 512 MB card; 12gb of RAM, i7 quad core, 2.67 GH, PS CS5 and Lightroom 3.2, Wacom Intuos 3 tablet.
    I have the most updated drivers for video, wacom tablet. OS is current with updates. PS CS5 is updated, but I am NOT running Lightroom's 3.3 RC.
    I updated all software updates for the NIK software collection from their site and still have the same problem even after uninstall and re-install.
    When I attempt to run HDR Efect Pro I get the menu window to select my images, click ok and with in seconds I get the message that Adobe Photoshop CS5 has stoopped working and must close...
    I've gone to their site and looked into their FAQ/troubleshooting and did all their recommendations, update drivers, look for color profiles with 0 Bytes in the system color spool for both 32 and 64 bit apps and still no luck. This also happens with CS4 and CS3 and if I attempt to use the program form Lightroom and Bridge. Any ideas, work arounds, suggestions? Their automatic reply from my support request says 2-3 days due to the high populaity of their program!!!
    Thanks for any and all help.

    Outside of suggesting some pretty generic things, I can't offer much help...  I don't use Nik products myself
    You could try disabling the "Use OpenGL Drawing" setting in Photoshop as a workaround to see if that helps.  Perhaps between Photoshop and the plug-in problems are being caused in the OpenGL driver for your particular video card.
    Also, given that 3rd party plug-ins and Photoshop could be competing for memory, you could try changing the amount of memory Photoshop is allowed to use in the Edit - Preferences - Performance dialog.
    Good luck.
    -Noel

  • Help with treemap and other stuff

    hi guys..
    i m new to this forum..
    and this is my first post....so if i act a little naive .....please bare with me.
    and if this is not the correct place to post ..i m sorry for that.
    i have an assignment to submit....i m getting the whole picture ....but not sure how to go about implementing it.
    here it is...
    Write an Object Oriented solution to the problem in Java. The solution is to consist of:
    A TableIndex class
    A TableNavigator Interface
    A data row class ....class that i have to create.
    An application class to use and test your TableIndex class
    The following UML class diagrams show the public methods of the classes. Other methods may be specified. Specify data members, inner classes and interfaces as appropriate.
    TableIndex Class
    The TableIndex class is an index to a collection of objects. The class is to approximate an index to a data table in memory that consists of a number of rows. To control access to the index a current row is defined that specifies the row that can be accessed. To retrieve a row from the index it must be the current row. The get() method is the only method in TableIndex class that retrieves a row from the index. The current row can be changed explicitly using the methods: previous(), next(), first(), last(), gotoBookmark and find(K); and implicitly using insert(K, V), modify(K, V) and remove().
    The TableIndex class is to be implemented using the java API's TreeMap class and must use Generics. The data types K and V below are generic types for the Key and Value (row) respectively. An important aspect of the assignment is using the Java API documentation to understand the TreeMap class.
    guys ....can u plz help with the starting bit ..
    what should be the opening statement of the class...
    public class TableIndex<K , V> .....????
    and what should be the treemap declaration..??
    TreeMap<K , V> indexTable = new TreeMap<K , V>();...???
    i m confused....
    can u plz explain to me..

    hi mate.....didnt quite get you..
    can u plz be a bit more simple in explanation..!!!
    i will post the whole question ..so that anyone reading will understand better....
    Problem Description
    You are to develop an index class and associated classes.
    Requirements
    Write an Object Oriented solution to the problem in Java. The solution is to consist of:
    A TableIndex class
    A TableNavigator Interface
    A data row class
    An application class to use and test your TableIndex class
    The following UML class diagrams show the public methods of the classes. Other methods may be specified. Specify data members, inner classes and interfaces as appropriate.
    TableIndex Class
    The TableIndex class is an index to a collection of objects. The class is to approximate an index to a data table in memory that consists of a number of rows. To control access to the index a current row is defined that specifies the row that can be accessed. To retrieve a row from the index it must be the current row. The get() method is the only method in TableIndex class that retrieves a row from the index. The current row can be changed explicitly using the methods: previous(), next(), first(), last(), gotoBookmark and find(K); and implicitly using insert(K, V), modify(K, V) and remove().
    The TableIndex class is to be implemented using the java API's TreeMap class and must use Generics. The data types K and V below are generic types for the Key and Value (row) respectively. An important aspect of the assignment is using the Java API documentation to understand the TreeMap class.
    TableIndex
    +TableIndex()
    +TableIndex(name: String, comp: Comparator)
    +getName(): String
    +isEmpty(): Boolean
    +size(): Integer
    +hasPrevious(): Boolean
    +hasNext(): Boolean
    +previous()
    +next()
    +first()
    +last()
    +setBookmark(): Boolean
    +clearBookmark()
    +gotoBookmark(): Boolean
    +contains(key: K): Boolean
    +find(key: K): Boolean
    +get(): V
    +insert(key:K, value: V): Boolean
    +modify(value: V): Boolean
    +modify(key: K, value: V): Boolean
    +remove(): V
    +iterator(): Iterator
    +equals(obj2: Object): Boolean
    +toString(): String
    Additional Notes:
    The table index has an order defined by the compareTo method of the key's class or by the compare method specified in the class that implements the Comparator interface.
    getName(): the name of the index, blank by default.
    isEmpty(): returns true if there aren't any rows in the table index
    size(): returns the number of rows in the table index
    hasPrevious(): returns true if there is a row before the current row.
    hasNext(): returns true if there is a row after the current row in sequence.
    previous(): if there is a row before the current row, move to the row and make it the new current row.
    next() if there is a row after the current row, move to the row and make it the new current row.
    first(): if the table isn't empty, move to the first row and make it the new current row.
    last(): if the table isn't empty, move to the last row and make it the new current row.
    setBookmark(): sets a bookmark at the current row. If the bookmark is successfully set the method returns true. The bookmark is cleared if the TableIndex is empty or the row the bookmark was set on is deleted..
    clearBookmark(): sets the bookmark to null, indicating there isn't a bookmark.
    gotoBookmark(): if a bookmark has been set, go to the bookmarked row. If successful the book marked row becomes the current row and the method returns true.
    contains(K): return true if a row with the key specified exists.
    find(K): if a row is found with the specified key, the current row is set to the row found.
    get(): returns the current row. Null is returned if there isn't a current row.
    insert(K, V): inserts a row (value) with the key specified. The key must not be null and must be unique (not already in the TableIndex). The row (value) must not be null. If the row is successfully inserted true is returned, and the row becomes the current row..
    modify(V): change the current row's data to the row (value) specified. The key and the current row key are to remain the same. If successful true is returned.
    modify(K, V): change the current row's key and data to the key and row (value) specified. If successful the changed row becomes the new current row. If successful true is returned. Note: this is more difficult than modify(V).
    remove(): remove the current row. When a row is deleted the next row (if available) becomes the current row, otherwise if there isn't a next row the previous row becomes the current row, otherwise the table is empty therefore the current row is null.
    iterator(): returns an iterator to the rows (values) in the index. The rows are to be retrieved in order. The remove method does not need to be implemented (its method body can be empty)..
    the equals method uses the name, and the rows (values) in order when testing for equality.
    the toString method should return appropriately formatted data members and the rows (values/data) in the index.
    TableNavigator Interface
    «interface»
    TableNavigator
    +isEmpty(): Boolean
    +hasPrevious(): Boolean
    +hasNext(): Boolean
    +previous()
    +next()
    +first()
    +last()
    +contains(key: K): Boolean
    +find(key: K): Boolean
    Additional Notes:
    The TableIndex class implements the TableNavigator Interface.
    The purpose of the above methods is outlined in the TableIndex class.
    Your Data Row Class
    You are to include a class of your own to represent a row of data in the TableIndex. This is not to be a class that was covered in other programming subjects. It does not need to be complex but must include a range of data types. This class will be used to test your TableIndex class. The class should have an appropriate name and deal with something of interest to you.
    Your Application Class
    The application class is to make use of the TableIndex class and your data row class. It is to clearly show how the TableIndex class is used, and in doing so, test it. The class should have an appropriate name. The application class should create two indexes of different key data types. One of the indexes must make use of the Comparator interface to have a key that is in descending order.
    Output
    Output in the test classes/programs is to go to standard out or a text file. There should be no output from the TableIndex class or your data row class. A GUI interface is NOT required. There is no need to input data from the keyboard or file. Use the Unix script command or write output to a text file (etc) to provide example runs of your test programs.

Maybe you are looking for

  • How do I allow non-Apple software to install in OS 10.8.4?

    I've just installed Mountain Lion on an iMac (27", mid-2011) and want to install some some software I've downloaded from a reputable third-party developer. Problem is, I get an error message that tells my security preferences only allow apps from the

  • Message-Pls wait while Windows configures SAP B1 Client

    Hi, While logging in to SAP B1,system is displaying a msg 'Please wait while Windows configures SAP B1 Client.' Same msg is displayed while connecting to DTW as well. Then it takes a few minutes to connect . What could be the reason? Will the uninsta

  • Selection screen issue with hierarchy variable, due to compounding

    Hello people, I'm having this odd effect with a Hierarchy variable in the selection screen of a query,  the IObject is 0PROFIT_CTR. When I display the hierarchy values and pick up one of them, it returns ok to the sel.screen in this format: CO_AREA +

  • P n L statements in SAP BI.

    HI, I am trying to explore the options for SAP BI Pn L statements. can someone help me how to go ahead. Currently i dont an idea how to start. Are there any standard reports i.e. tailormade P nL statements? Thanks.

  • Maps turn by turn directions

    Hey you know when you ask Siri to give you directions she opens up  maps and the app automatically zooms into the route(turn by turn directions). And when I ask her to give me directions maps doesn't zoom in the route it just gives me overview and I