Help with large document please.

I'm using a MacPro 2 x 2.26 Xeon/6GB RAM/Radeon graphics card. For the 6th year I'm producing an A4 product catalogue for a client with mostly full page photographs on every page. This year it will have grown to 400 pages. I'm half way through and already the file is becoming a bit unwieldy with daily crashes and slow to load. Does anybody know if increasing the RAM would help or should I try to split the catalogue into smaller chunks and then join them up into a book. That's not something I've tried before so am not sure about the drawbacks. The client does have a habit of changing the page order quite a bit which might be a bit of a problem if I have to move between the smaller documents. Or am I wrong?
Any advice most welcome.

Thanks for your comments Peter. I think I'm at a stage where I can easily split a duplicate file into 10 or maybe 11 documents but I will need to reference 5 or 6 words on each page for the index. Hopefully that won't tax the system too much!

Similar Messages

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Acrobat 6.0 Professional- Having Trouble with a Large Document-Please Help

Using Acrobat 6.0 Professional. Working with a large document (1400 pages, 25 megs). I broke it into two parts to make it easier to work with. However, even though the two parts are now 700 pages, they are each still 25 megs. It appears that each document is retaining the full history of the document, perhaps as restore points. How do I purge the history so the document is small and more manageable?

I am not sure if version 6 can optimize PDF files but in version 9, you have to follow these instructions:
Optimize a PDF
Note: Optimizing a digitally signed document removes and invalidates the digital signatures.
Open the PDF Optimizer dialog box.
To use the default settings, choose Standard from the Settings menu, and then skip to step 6. If you change any settings in the PDF Optimizer dialog box, the Settings menu automatically switches to Custom.
From the Make Compatible With menu, choose Retain Existing to keep the current PDF version, or choose an Acrobat version. (The options available in panels vary depending on this choice.)
Select the check box next to a panel (for example, Images, Fonts, Transparency), and then select options in that panel. To prevent all of the options in a panel from executing during optimization, deselect the check box for that panel.
(Optional) To save your customized settings, click the Save button and name the settings. (To delete a saved setting, choose it in the Settings menu and click Delete.)
When you are finished selecting options, click OK.
In the Save Optimized As dialog box, click Save to overwrite the original PDF with the optimized PDF, or select a new name or location.To optimize several documents at the same time, use the Output options for the Batch Processing command.
It is worth a try assuming you have this facility in version 6.
Always backup the document before doing this.
Good luck.

Help with larger sized voice wlan.... design considerations.... tips...etc...

Hi Everyone,
I'm hoping that you guys and gals can help me with an ongoing problem that we have at one of our sites. We're working on areas of the location due to it's size and phone load. We have an area, that I will refer to as building A, that is roughly a square that is 240' x 240'. The inside of the building has some pallets inside for storage(they allow RF to penetrate through them) and also some metal production lines. There is also a mezzanine / elevated area in the middle that the users can walk under. It's not very large, but it would affect a phone if you walked underneath it while making a call. So, now that I have a brief description of the environment, I will tell you the equipment I'm running...
1 x 4402 50AP Wireless Controller with 6.0.199.3 (MR3) installed.
We currently have nine AP's installed in this area, with 4 up front so that way they cover the office areas better. Most are 1231G's, but some are 1242's.
Since we do not have A radios everywhere (budgetary decision) we are running all of these phones on 2.4Ghz (Yikes! I know!)
The 7920's use LEAP and the 7921's use PEAP MS-CHAP v2 with CCKM enabled on the controller.
I also have 802.1p wired QoS enabled for the voice QoS profile and it is applied to our voice WLAN.
We have conference rooms in the front area that will need to support roughly 20-30 maximum mixed 7920 and 7921G phones in a roughly small area. (Yikes! I know!)
We also have a 2106 with mesh .54M installed, but it is for outdoor AP's and should not be affecting this area.
So, I guess my questions are....
Has anyone ever operated the 7920 and 7921G's in mixed mode?
I'm thinking about separating the 7920s on 2.4 and tell the 7921's to prefer the A band or just use A. This will require A radios / surgery, but we've dealt with different code trains, TAC configs, and even added a few more radios. I think it's time to say we need to redesign this area. It doesn't help that phones keep getting purchased either....
What rule of thumb would you guys / gals say would be appropriate for this phone count in terms of the number of AP's I should use?
Since we're dealing with two different phone models, it makes it hard to simply just read the deployment guide. I know these phones can coexist, I just think we're running into over capacity and problems with 802.11B in the mix. In the conf room right now, there are most likely signals from at least two AP's. This doesn't seem like enough bandwidth for just the 2.4 Ghz range when 20 - 30 phones are in there. Not all of them are calling, but the associations / mgmt traffic alone must be horrendous since the phones are 802.11B
We are going to do a manual survey with a 1242 since that AP will support both phone models. I think we may need to survey twice if we're going to go this route; One survey for the 7920's on 2.4Ghz with a 1242AG and one survey on 5Ghz with a 7921G. I think that will provide the info we need to get the AP's repositioned where they need to be.
What kind of power levels should I be using in an area like that? We've originally had a survey at 50mW, but since then we turned the power down to pwr lvl 3 in some spots due to the additional AP's. I've seen references of roughly 1 AP per 3000 sq. ft at pwr level 4, but that seems overkill.
Can we run mixed power levels on AP's with the phones? Or will that cause one way audio due to the transmit power diffrences in the cells?
I'm thinking that we should pick a power level, survey the -67 cell size at the power level, add more AP's so that way they are overlapped 15-20%, and then actually implement the design. I'm pretty good at getting decent channel assignments in place. I know of non-overlapping channels, RRM, etc. I also have an AirMagnet laptop with an Aironet Adapter. It is good for finding noise, interference, etc...
I understand this is practically a book, but at this point, we've been trying a LOT of different things in order to get this to work properly. I think it's finally time for me to "strongly suggest" that we do the following...
1. Choose ONE phone model.
2. Choose ONE AP model.
3. Make sure to implement the 5Ghz band for all AP's so we have complete coverage.
4. Choose ONE power level for each band. This will affect the coverage and placement of AP's. I'd imagine that we'd need to survey with A first, and then survey with b/g. Typically we can use the 1242 and get about the same cell size on both bands, but 5Ghz is a higher frequency and may not penetrate as much as 2.4 Ghz..
5. Come up with a new coverage map based on a manual site survey with the phones mentioned above.
6. Implement the design.
7. Use it.
8. Try not to have a heart attack when the system actually supports that many phones in that area...
So, please, let me know your thoughts and if you have any suggestions. It would be greatly appreciated. We've been slowly working out the gremlins in the phones there over the past few years. I'm more of a data wireless person myself, but I do have good luck with a low to moderate phone count (usually no more than 7 calls per AP). Once we start doing craziness like trying to get 20-30 802.11B phones to work in the same area on only one or two AP's, then things start to become a challenge, especially when we don't have the 5Ghz cells to help with the bandwidth requirements for voice....
Thank you for your time,
Craig

There's a pretty recent (last few months) Voice over Wlan design guide published (was published for the 9971 phones - but all great advice) and it recommends just about all the settings required for an off the shelf wireless voice network.
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/7_1_3/english/deployment/guide/9971dply.pdf

Help with Validation Problem Please

I don't understand this validation and don't know how to fix it. I have checked my other websites and they seem fine. I don't think I have done anything different The link for the website ishttp://www.greenpatchwebsites.com/pow/index.html
and the validator is http://validator.w3.org/check?uri=www.greenpatchwebsites.com%2Fpow%2Findex.html&charset=%2 8detect+automatically%29&doctype=Inline&group=0
Please can you help.
Thank you very much in advance.

Thanks for that. I have tried it on a new page: http://www.greenpatchwebsites.com/pow/newtest.html and here is the validator :
http://validator.w3.org/check?uri=www.greenpatchwebsites.com%2Fpow%2Fnewtest.html&charset= %28detect+automatically%29&doctype=Inline&group=0&No200=1- unfortunately loads of errors
I also tried the recommended template:
Use the following markup as a template to create a new XHTML 1.0 document using a proper DOCTYPE. See the list below if you wish to use another document type.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
     <title>An XHTML 1.0 Strict standard template</title>
     <meta http-equiv="content-type"
          content="text/html;charset=utf-8" />
     <meta http-equiv="Content-Style-Type" content="text/css" />
</head>
<body>
     <p>… Your HTML content here …</p>
</body>
</html>
but was getting errors with that. As you can tell, I need serious help with this. Which doc type should I be using
and why doesn't Dreamweaver just do it for you when you select one?
Thanks very much again in advance.

Help with a forumula, please

First, some background. I have a couple of Numbers documents that I use to record the daily weather. The first is a very large document containing sheets for each of several years. Each sheet has one large table with the daily info & a couple of smaller tables that hold records, monthly totals, etc. I used to manually enter the data in this document but I have recently set up a second document that "collects" the data for later pasting into the first.
This second document is where I need some formula help. I get data in four different .csv files each day & then copy the data into 2 tables on each of 2 sheets. These have formulas in the footer rows to get the various max/min of the column. The third table on each sheet gets the data from those footer rows using a formula to pick the max/min. I then copy & paste values so that I don't have to keep adjusting formulas & can then delete the .csv data, reusing those tables.
There is a formula to get the time of the highest wind gust. This works well unless there is more than one time in the day with the same peak gust speed. Question: Is there a way to get that formula to just report the first time occurrence? If I could do that, then I wouldn't need the third sheet in my document, I could just paste all of the .csv data into one or two tables.
I've put the Numbers (WS daily.numbers.zip) file on my iDisk if anyone wants to look at the file.
TIA,

Peggy wrote:
There is a formula to get the time of the highest wind gust. This works well unless there is more than one time in the day with the same peak gust speed. Question: Is there a way to get that formula to just report the first time occurrence? If I could do that, then I wouldn't need the third sheet in my document, I could just paste all of the .csv data into one or two tables.
Hi Peggy,
One technique I've used to eliminate duplicate values is to add a column in which a tiny increment is added to each value based on the row it occupies. Assuming your values are listed in chronological order, you'd want to either calculate the increment in a manner that would have it decrease as the numbers increased, or use the easier 'increase with row number' calculation and subtract that from the actual value.
The example is for gusts measured to the nearer tenth of a unit, and have included only 'actual' values of either the maximum, 0.1 below and 0.2 the maximum. The 'time' values are artificial, and simply 15 minute intervals.
Column A contains the 'actual' time values in chronological order.
Column B contains the 'reported' gust speeds, reported to the nearer tenth of a unit.
Column C contains the 'adjusted' gust speeds, calculated with the formula:
=B-ROW()/10000
In the footer row:
A: =LOOKUP(MAX(C2:C15),C2:C15,A2:A15)
B: =MAX(B)
C: =ROUND(MAX(C),1)
Body cells in columns A and B have a conditional format rule to change the background fill if the cell contents match their footer cell. As I had used ROUND to return the MAX value in the footer of column C to its original precision (done so that this cell could be used as the pick-off cell for this value), the same rule could not be applied to column C using this footer cell.
Hence the value in D3, created with =MAX(C2:C15, and used only to permit conditional formatting of the maximum value in C.
The checkbox in D2 is a test device, used to generate a new set of the 'measured' values in column B. These values are actually calculated using =83-(RANDBETWEEN(1,3)/10).
Regards,
Barry

Need help with Portal Themes -- Please help

I need help with Portal Themes. I have read every document I can find but I am having no luck. All I want to do is change the colors for the Exceptions on one of my queries. I have created my own Portal Theme where I have changed the colors but I do not know how to assign my newly-created Portal Theme to my query. Can someone please give me the detailed steps on how to do this? Please help because this is driving me crazy.
Thanks.
Ryan

Hi,
Refer
Exceptions - How to change the colors
This may help.
Thanks,
JituK

Help with photo albums Please

Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx

The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.

Help with Option 3 please

A week ago I was on Option 1 but due to heavy use my speed was reduced to 15.7k/sec !.I was advised to upgrade to Option 3 which I promptly did and that was done on the 29th(last week).
My speed though is still 15k/sec and I cannot watch any streaming video or BBC News Channels etc
Would some kind gentleman please look into it for me and advise.......thankyou
Solved!
Go to Solution.

Hi Pete,
I am sorry for the delay in getting back to you. I picked your email up this morning and have dropped you a reply. I am pleased that you managed to sort this out, if you need any further help just let me know.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Help with ME21N Document Overview Layout

There are two sets of people who use ME21N to create Purchase Orders. I've created 2 layouts for them to be used with the document overview on. I know I can set one layout as a system default. Is there anyway I can have the layout assigned or defaulted per User?
Thanks.

Try using the transaction code OMET.
Create new Function auth (say PO) there in which select FieldSel. in General Parameters tab. As mentioned that you had created two layouts, select this layout from dropdown using F4 on field FieldSel. then save the transaction.
Now assign this newly created Function auth (PO) to the specific users using SU01/SU3 in parameter tab in parameter as EFB with value as PO (as defined).
Hope this will help you.
Enjoy,
Parag Mahajan

Adding footage fails with larger documents

Hi,
I'd be thankful for any advice: I tried to add footage to a document (2.300 kb) for several times, but it doesn't work. With smaller documents it's no problem. It's a pdf of a magazine we publish for open access.
Has anyone an idea that would help me?
Thanks.

Hi MScallion,
You can try the following Jython script to transfer the files using FTP.
     import snpsftp
     ftp = snpsftp.SnpsFTP('HOST_NAME', 'USER_NAME', 'PASSWORD')
     ftp.setmode('ASCII')
     ftp.mget('SOURCE_DIR', 'File1.txt','OUTPUT_DIR')
     ftp.close()
Thanks,
Yellanki

Help with button code please?

I am a novice and have just completed my first animated movie. I need help with action script.
The movie is currently looped and I have created and invisible button the size of the frame with the intention that a user can click on the movie image to stop it and on second click continue the movie from where it stopped.
I have used the AS event handler method to stop the movie. I have tested it and it works. But I cannot figure suitable code to restart the movie.
Two questions;
1. am I going about the task the right way? (should I use two buttons, one stop, one start)?
2. if my approach is feasible, can anyone give me the correct AS to re-start the movie and put me out of my misery please?

you can use the following after changing "yourbutton" and "yourmovieclip" to use suitable instance names:
yourbutton.onRelease=function(){
if(!this.toggle){
yourmovieclip.stop();
} else {
yourmovieclip.play();
this.toggle=!this.toggle;

Help with Required fields-PLEASE

I have been attempting to get help with a required field and one of the forum helpers said he got it to work for me but I cannot and I have not been able to get any more responses from him to help me further.
I am attempting to have a radio box when the YES is selected to require another field to be completed. The script I was provided with is:
getField("Location").required = (getField("Group1").value == "Yes");
Location being the field that I require to be filled in if Group 1 is Yes. The previous forum helper indicated that I had to have this script in both fields in Group 1 and when I do that, nothing different happens.
What am I doing wrong?
Please, I need to fix this right away and I will be using this java script on many other forms that I have so I need to get this done soon.
Thank you in advance.

Wht you want can get somewhat complicated. One way to prevent subsequent fields from being used is to set them to read-only and/or hidden. You could then use the Validate event of the text field to validate the entry and enable the subsequent fields if it is filled-in adequately. In general, you should also reset the fields whenever you hide them, so they don't contain potentially invalid data from previously being filled-in. So you could initially have the fields set to be hidden, and only unhide them if No is selected, or if Yes is selected and the required text field is filled-in.
I realize this may not be as helpful as you had hoped for, but I can't suggest specific code without knowing more about the form.

Help with a routine please

Hi experts!
I have a requirement and I need help with an abap routine.
I'm uploading a table from de ECC where each record contains one key figure per fiscal period (wlt01, wlt02,...wlt16). I need to have in a dso a unique key figure (called zwlt for instance) and the 0fiscper infoobject filled with the corresponding period, that is, for each record of the table, I need 16 records in the DSO with zwlt = wltXX and the fiscper = fiscyear&0&XX.
Any help please?
Thanks in advance.

there are multiple ways to handle this.
one way is to use APD to unpivot the data.
or else you can use the following sample code to derive what you want...this code might just hint at the way to proceed.
TYPES:
BEGIN OF tys_SC_1,
      wlt01           TYPE P LENGTH 8 DECIMALS 2,
      wlt02           TYPE P LENGTH 8 DECIMALS 2,
      wlt03           TYPE P LENGTH 8 DECIMALS 2,
      wlt04           TYPE P LENGTH 8 DECIMALS 2,
      wlt05           TYPE P LENGTH 8 DECIMALS 2,
      wlt06           TYPE P LENGTH 8 DECIMALS 2,
      wlt07           TYPE P LENGTH 8 DECIMALS 2,
      wlt08           TYPE P LENGTH 8 DECIMALS 2,
      wlt09           TYPE P LENGTH 8 DECIMALS 2,
      wlt10           TYPE P LENGTH 8 DECIMALS 2,
      wlt11           TYPE P LENGTH 8 DECIMALS 2,
      wlt12           TYPE P LENGTH 8 DECIMALS 2,
END OF tys_SC_1.
DATA: ls_type TYPE tys_SC_1,
      l_name TYPE string,
      l_count Type n length 2.
FIELD-SYMBOLS:
            <fs_type> TYPE tys_SC_1,
            <result> TYPE P .
ls_type-wlt01 = '1.1'.
ls_type-wlt02 = '2.2'.
ls_type-wlt03 = '3.3'.
ls_type-wlt04 = '4.4'.
ls_type-wlt05 = '5.5'.
ls_type-wlt06 = '6.6'.
ls_type-wlt07 = '7.7'.
ls_type-wlt08 = '8.8'.
ls_type-wlt09 = '9.9'.
ls_type-wlt10 = '10.1'.
ls_type-wlt11 = '11.11'.
ls_type-wlt12 = '12.12'.
CLEAR: l_count , l_name.
l_count = '01'.
ASSIGN ls_type TO <fs_type> .
Write: / .
DO 12 TIMES.
clear: l_name.
Concatenate 'wlt' l_count into l_name.
ASSIGN COMPONENT l_name OF STRUCTURE <fs_type> TO <result> .
Write: / , l_name , ' = ' , <result>.
l_count = l_count + 1 .
ENDDO.
hope it helps.
Regards
Ashwin

Help with UILabel subclass please

Hello all... I have a UILabel subclass I call CustomLabel. Ive been googling and reading the apple docs this entire week to figure this out. The few examples Ive seen, I dont think Im doing it right.
Im trying to create a subclass to use throughout my project. Every label will have these properties so I figured why not subclass. So through a lot of trial and error I ended up with this...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@property (nonatomic) CGSize shadowOffset;
@property (nonatomic) UITextAlignment *textAlignment;
@property (nonatomic, retain) UIColor *shadowColor;
@property (nonatomic, retain) UIColor *textColor;
@property (nonatomic, retain) UIColor *backgroundColor;
@property (nonatomic, retain) UIFont *font;
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
@synthesize textColor;
@synthesize backgroundColor;
@synthesize font;
@synthesize shadowColor;
@synthesize shadowOffset;
- (id)initWithFrame:(CGRect)frame {
if ((self = [super initWithFrame:frame])) {
self.textColor = [UIColor whiteColor];
self.backgroundColor = [UIColor clearColor];
self.font = SMALL_CHALKDUSTER;
self.shadowColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
self.shadowOffset = CGSizeMake (0, 2);
self.textAlignment = UITextAlignmentCenter;
return self;
- (void)dealloc {
[super dealloc];
@end
I then allocate a label like so...
ViewController.h
CustomLabel *myLabel;
@property (nonatomic, retain) CustomLabel *myLabel;
ViewController.m
myLabel = [[CustomLabel alloc] init];
myLabel.text = @"Blah blah blah";
I feel like Im way off on this... I must be since it isnt setting any of the properties Im trying to use in the subclass.
I found an older post on the forums here for setting the textAlignment but for some reason I couldnt apply the same logic to mine.
So can anyone help me with this subclass please and thank you?

xnav... thanks a ton for pointing me to this link. Its got me closer to my end goal than I was before. Right now I have...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
- (void) drawRect:(CGRect)rect {
CGContextRef ctx = UIGraphicsGetCurrentContext();
UIColor *lineColor = [UIColor whiteColor];
UIColor *shColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
//UIColor *bkgColor = [UIColor clearColor];
CGContextSetFillColorWithColor(ctx, lineColor.CGColor);
CGContextSetShadowWithColor(ctx, CGSizeMake(0, 2), self.font.pointSize / 2.0, shColor.CGColor);
//CGRect drawRect = CGRectMake(rect.origin.x, rect.origin.y,rect.size.width, rect.size.height);
//CGContextSetAlpha(ctx, 0) ;
//CGContextFillRect(ctx, drawRect);
//CGContextSetStrokeColorWithColor(ctx, [[UIColor clearColor] CGColor]);
//CGContextSetFillColorWithColor(ctx, [[UIColor clearColor] CGColor]);
CGContextSetBlendMode(ctx, kCGBlendModeClear);
//CGContextAddEllipseInRect(ctx,CGRectMake(size.width-(size.width/2)-(size.width/10), (size.width/10), (size.width/2), (size.height/2)));
//CGContextClosePath(ctx);
//CGContextDrawPath(ctx, kCGPathFillStroke);
//CGContextSetTextDrawingMode(ctx, kCGTextFillStroke);
//self.backgroundColor = [UIColor clearColor];
//[self setBackgroundColor:[UIColor clearColor]];
[self.text drawInRect:self.bounds withFont:TINY_CHALKDUSTER lineBreakMode:self.lineBreakMode alignment:UITextAlignmentCenter];
- (void)dealloc {
[super dealloc];
@end
As you can see I have a couple of things commented out. LOL I still cant figure out how to make the background color clear. I also dont know if I need the dealloc in this subclass. But the other properties seem to be working like the font and line color.
Thanks again for the link and getting me in the right direction xnav. If you can lend any more assistance on how to get that darn background color clear I would appreciate it!

Help with large document please.

Similar Messages

Maybe you are looking for