Help with left side panel area in lightroom 5

I am having trouble with left side panel in, library - lightroom 5. I don't seem to be able to open more than one area at a time. ie: if I open catalog and then try to open folder..catalog will close. I have also noticed that the little triangle that I click on to open and close an area is not a solid triangle but is kind of dotted. Have I done something to change the settings or something? I want to set up a new collection but I can't open both folder and collection at the sametime. HELP!

Right click next to one of the headers and a popup will let you change how the panel is displayed. See screen capture.

Similar Messages

Itunes does not show the left side panel with the library and my ipod(when I connect it)

My ipod (5th gen) is not recgnized by itunes nor does itunes show the left side panel of the ipod being connected. Windows 7 recognizes the ipod when connected however.

Press CTRL+S.
tt2

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Need help with horizontal accordian panels

Hi,
I'm wondering how I would re-create a horizontal accordian panel set, such as the one used in this website link, "http://www.thecapriapts.com/".
When I insert a "spry accordian" panel set, the panels are stacked on top of each other. I guess you would consider that a "vertical" accordian. Is it possible to manipulate the CSS to have it display horizontally, like the link I attached? Or.. is this a common javascript that I sould look into?
As always, thanks for your help out there...
Chris

With spry, there are two different kinds you can use: horizontal and vertical. What you're looking at in that site is horizontal. Usually, it appears as rectangles placed next to each other with the spry flying out below. In DW, you can go to your CSS rules for your spry menu and change the width and height of your boxes in your spry, depending upon which rule you have selected. Play around with that and see if you can just manipulate the horizontal accordian spry to where the rectangles end up being tall and thin. This will make it difficult, however, to get the text on its side like you see in that site. I'm not sure how you would go about doing that. But I would suggest trying to play around with the values in your CSS styles panel on the right (this is me looking at CS5 mind you. I'm not sure what you're running.)
Either way, for times sake and also readability, might I respectfully suggest playing around with other sprys to see if any look more aesthetically pleasing for your site? It would also make it a lot simpler to tweak to your liking.

Help! LEFT SIDE OF MACBOOK AIR SCREEN NOT WORKING

The left side of my screen has horizontal lines and static.It is about 1 1/2 inches in. It is constantly moving and the left side of the screen looks backwards in that section. The rest of my computer works fine, I just can't touch the left side. I have no clue what happened.

you have a faulty Air, ...if purchased within 14 days return for a new one.
Before doing same reset SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
unlikely this will solve same.
Your logic board and/or monitor cable are defective (most certainly). If out of 14 days make appt. for repair/diagnostic.

Help with description of Business Area!

Hi everyone!
I really need help with a field, 'cause I can't find in which database table is saved, the filed that I'm using is BSEG-GSBER and it throws me a number of a business area, but I also need the name of the business area and that's the field that I can't find.
If anyone can help me to find that field, I'll really appreciate it.
Have a good day and thanks for your time!

Hi,
Take a look at TGSBT table, this is the text table for TGSB which is the master table for Business areas.
TGSBT has got the names that you are looking for in all the languages that have been maintained.
MANDT
SPRAS
GSBER
GTEXT
Regards,
Ravi
Note : Please close thread, it this solves the issue

Tab: side panels are white instead of black

When in the Library module, when I press tab or shift tab to make the side panel(s) go away, the background is white and I would like it to be black. How do I make this change? Also, in "Lights Out" (pressing L) the background gets lighter instead of darker. How do I change this to darker? THanks!!

Change your preferences settings.
Frans

Need help with Spry Collapsible panels

I'm fairly inexperienced with Dreamweaver (CS4) and especially new to the Spry feature, so bear with me... I need all the help I can get! I've inserted six Spry collapsible panels to an HTML page and uploaded everything (including SpryCollapsiblePanel.css and SpryCollapsiblePanel.js), but they're automatically displaying as open and I can't click on them or close them. I'd like them to be closed until selected and opened.
What am I doing wrong?
Here's the URL: http://www.nicolegriffith.com/trustm.html
Thank you!

I just looked at your code, and your SpryAssets content is not there. This is the extent of your SpryCollapsablePanel.js
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title>404 - Not Found</title>
</head>
<body>
<h1>404 - Not Found</h1>
</body>
</html>
Make sure your spry assests folder is in your root directory and upload the files once you know they are where they should be.
Gary

PLEASE help with server-side form validation using PHP!!!

I feel like im going round and round in circles with this, after looking into all sorts of server-side advice i've come to the conclusion that i want to validate my form using server-side validation with PHP.
So my form has several drop down menu's and textareas (not all of them need validation). For the part of my form i would like to validate, all i want is the drop downs to have to be changed/selected. So just a simple message like "You must select an option" if customers haven't done so. For the textareas, they just need to be filled out, so a message like "Information required" to come up if customers haven't done so.
I believe i need to create a PHP page say for example 'error.php' place the validation code in there and set this part of the the form to -
<form name="product"form action="error.php" method="post" class="product_form">
BUT im getting really confused with creating the code for the error.php. Please please can anyone help me with this!!!???
Here are the drop down menu's i need validation on, error message being "You must select an option",
"figurine"
"engraving"
"font"
and here are the textareas that need validating, error message "Information required",
"test"
"Name"
"house"
"line_1"
"line_2"
"county"
"postcode"
"tel"
www.milesmemorials.com/product-GK1.html
I'd really appreciate any help!!!

Ness_quick wrote:
Great thats good enough for me. In that case, would you please be able to help me create the javascript for the above validation?? If you could just help me create it for this page i can amend it for all the other pages. I'd really really appreciate it!!!
Can you follow the below example?? Obviously AFTER validation has been successful you need to collect the information from the form and send it to the recipient email address...that's where you can use php. I'll check back tomorrow and see how you are doing.
<!DOCTYPE HTML>
<html><head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Form validation</title>

<script type="text/javascript">

</script>
</head>
<body>
<form name="product" form action="processForm.php" method="post" class="product_form" onsubmit="return RequiredFormFields()">
<p class="product_form_options">Choice of Figurine<br>
<select name="figurine" class="productButton" id="figurine" onChange="Recalculate()">
<option selected>-- Select figurine --</option>
<option value="7031">Tropical Green Granite with bronze sacred heart figurine as pictured(£7031)</option>
<option value="5216">Tropical Green Granite with bronze effect sacred heart figurine (£5216)</option>
<option value="5216">Tropical Green Granite with reconstituded figurine MF122(£5216)</option>
</select>
</p>
<p class="product_form_options">Engraved Lettering<br>
<select name="engraving" class="productButton" id="engraving" onChange="Recalculate()">
        <option selected>-- Select engraving --</option>
        <option value="2.30">Sandblast and enamel painted (£2.30/letter)</option>
        <option value="2.80">Sandblast and guilded (£2.80/letter)</option>
        <option value="2.20">Maintenance free (£2.20/letter)</option>
        <option value="3.73">Traditionally hand cut and enamel painted (£3.73/letter)</option>
        <option value="3.98">Traditionally hand cut and gilded (£3.98/letter)</option>
        <option value="4.34">Raised lead and enamel painted (£4.34/letter)</option>
        <option value="4.59">Raised lead and gilded (£4.59/letter)</option>
      </select>
</p>
<p class="product_form_options">Letter/Font Style<br>
      <select name="font" class="productButton" id="font" >
           <option selected>-- Select style --</option>
           <option value="Maintenance free">Maintenance free </option>
           <option value="White painted block">White painted block</option>
           <option value="White painted roman">White painted roman</option>
           <option value="White painted Script">White painted Script</option>
           <option value="White painted Celtic">White painted Celtic</option>
           <option value="White painted Nova">White painted Nova</option>
           <option value="Sliver painted block">Sliver painted block</option>
           <option value="Sliver painted roman">Sliver painted roman</option>
           <option value="Sliver painted Script">Sliver painted Script</option>
           <option value="Sliver painted Celtic">Sliver painted Celtic</option>
           <option value="Sliver painted Nova">Sliver painted Nova</option>
           <option value="Gold leaf painted block">Gold leaf painted block</option>
           <option value="Gold leaf painted roman">Gold leaf painted roman</option>
           <option value="Gold leaf painted Script">Gold leaf painted Script</option>
           <option value="Gold leaf painted Celtic">Gold leaf painted Celtic</option>
           <option value="Gold leaf painted Nova">Gold leaf painted Nova</option>
           <option value="Gold leaf painted Old English">Gold leaf painted Old English</option>
         </select>
         </p>
         <p>
<p>Name<br>
<input name="Name" type="text" id="Name" value="">
</p>
<p>House name or number:<br>
<input name="house" type="text" id="house" size="67">
</p>
<p>
<input name="submit" type="submit" class="place_order" id="submit" value="Place order">
</p>
</form>
</body>
</html>

Need help with spry collapsible panel (menu)

I learn as I go when I created my website http://www.invitation-fascination.com/shapes.html and so far I've created a page with 13 spry collapsible panels- I think it came out pretty well. Now this is what I want to add to the page:
I want to create a selector (drop down) menu above the panels with the option to select any one of the 13 panels.
Once selected it will move directly to that panel and open it.
I've tried the piselect thing and with the "open" and "close" button that will programatically open the panels, but what I want is for the panel to be selected from the menu and then the page goes directly to that panel and it then opens.
Is there a way this can be done? Please help
I'm really not that good at this stuff- please be easy with your response- thank you

Have a look at the last example http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html
Gramps

Help with Columnar (side by side) Subforms - Urgent

I am attempting to create a two column form that contains dynamic text in both columns. I have the subforms created and formatted. The subforms contain labeled fields. The problem I'm having is that I can't get the subforms to begin at the same position. I have tried many different things but one side is always one line below the other. I have tried adjusting the subforms positioning field and changing the location of the data in the .dat file. There are also static fields in column 2 below the dynamic column 2 subform data and the data is never merged in those fields:
Column 1 - 4 Different Subform types       Column 2 - 5 Different Subform types
Service & Equipment                              Order Information
Product Name                                        Service Installation
Item 1                             $000                • Install Type                 Install Type
Item 2                             $000                • Install Date                 Date
(This column continues for 30 line items) (This column continues for 16 line items
                                                            Promotions (new section - no subforms)
                                                            Data field                      Data field
                                                            Data field                      Data field
                                                            Data field                      Data field
Any guidance is greatly appreciated as I have a deadline of tomorrow to get this working.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Please Please Help with Projectile Project Here are the Codes

I've got three(3) classes a Model, a view, and a controller.
This is a project about projectiles.it is an animation of a cannonball being fired from a cannon and travelling under the effect of gravity.A cannon fired at angle 'a' to the horizontal and with an initial speed 's', will have an initial velocity given by:
vx := s * cos(a);//velocity x equals the speed multiply by the cosine of angle a.
vy := s * sin(a);//velocity y equals the speed multiply by the sine of angle a.
Here are the code.
Model:
/** Cannon specifies the expected behaviour of a cannon*/
public class Cannon{
public static final int TICK = 60;
private int velocity = 0;
private static final double gravity = .098f;
private double angle = 0;
// distances & positions are meausred in pixels
private int x_pos; // ball's center x-position
private int y_pos; // ball's center y-position
// speed is measured in pixels per `tick'
private int x_velocity; // horizonal speed; positive is to the right
private int y_velocity; // vertical speed; positive is downwards
public Cannon() {
velocity = 3;
angle = 60;
angle = radians(angle);
x_pos = 0;
y_pos = 385;
/** shoot fires a shot from the cannon*/
public void shoot(){
move();
/**reload reloads the cannon with more shorts*/
public void reload() {
/** changeAngle changes the angle of the canon
* @params value - the amount to add or subtract from the current angle value*/
public void changeAngle(double value) {
angle = (double)value;
angle = radians(angle);
/** getAngle returns the current angle value of the cannon*/
public double getAngle() {
return angle;
/** changeVelocity changes the speed at which a cannon ball that is to be fire will travel at
* @params value - the new speed at which the user wants a cannon ball to travel at.*/
public void changeVelocityX(int value){
x_velocity = x_velocity * (int)Math.cos(value);
public void changeVelocityY(int value){
y_velocity = y_velocity * (int)Math.sin(value);
/** getVelocity returns the current velocity value of the cannon*/
public int getVelocityX() {
return x_velocity;
public int getVelocityY() {
return y_velocity;
/** getGravity returns the current gravity value of the cannon*/
public double getGravity() {
return gravity;
public int xPosition(){
return x_pos;
public int yPosition(){
return y_pos;
public void move(){
double dx = getVelocityX() * Math.cos(getAngle());
double dy = getVelocityY() * Math.sin(getAngle());
x_pos+=dx;
y_pos-=dy;
double radians (double angle){
return ((Math.PI * angle) / 180.0);
View:
import java.awt.*;
import javax.swing.*;
/** CannonView displays a cannon being fired.*/
public class CannonView extends JPanel{
/** DISPLAY_SIZE specifies the overall display area of the cannon and the bucket.*/
public static final int DISPLAY_AREA_SIZE = 600;
public RotatablePolygon rectangle;
public RotatablePolygon triangle;
public Cannon cannon;
public CannonView(Cannon c) {
this.setPreferredSize(new Dimension(600,450));
this.setBackground(Color.black);
cannon = c;
int xRectangle[] = {0,0,40,40,0};
int yRectangle[] = {400,300,300,400,400};
int xTriangle[] = {0,20,40,0};
int yTriangle[] = {300,280,300,300};
rectangle = new RotatablePolygon (xRectangle, yRectangle, 5,20,350);
// rectangle.setPosition (100, 100);
// triangle = new RotatablePolygon (xTriangle, yTriangle, 4,0,290);
triangle = new RotatablePolygon (xTriangle, yTriangle, 4,20,350);
//triangle.setPosition (100, 100);
JFrame frame = new JFrame();
frame.getContentPane().add(this);
frame.pack();
frame.setVisible(true);
frame.setTitle("Width = " + frame.getWidth() + " , Height = " + frame.getHeight());
/** drawBucket draws a bucket/target for which a moving cannon ball should hit.
* @param g - the graphics pen for which the drawing should occur.*/
public void drawBucket(Graphics g) {
g.setColor(Color.red);
int xvalues[] = {495, 519, 575, 595, 495};
int yvalues[] = {340, 400, 400, 340, 340};
Polygon poly1 = new Polygon (xvalues, yvalues, 5);
g.fillPolygon(poly1);
g.setColor(Color.white);
g.fillOval(495, 328, 100, 24);
Graphics2D g2d = (Graphics2D)g;
g2d.setStroke(new BasicStroke(2));
g.setColor(Color.red);
g.drawOval(495, 328, 100, 24);
g.drawOval(495,311,100,54);
/** drawCannon draws a cannon
* @param g - the graphics pen that will be used to draw the cannon.*/
public void drawCannon(Graphics g) {
Graphics2D g2 = (Graphics2D)g;
g.setColor(Color.red);
g2.fill(rectangle);
g.setColor(Color.orange);
g2.fill(triangle);
g.setColor(Color.blue);
g.fillOval(95, 340, 60, 60);
g.setColor(Color.magenta);
for (int i = 0; i < 6; i++){
g.fillArc(95, 340, 60, 60, i* 60, 30);
g.setColor(Color.black);
g.fillOval(117, 362, 16, 16);
/** drawCannonShots will draw the actual number of shots already used by the cannon
* @param g - the graphics pen that will be used to draw the shots of the cannon.*/
public void drawCannonShots(Graphics g) {
g.setColor(Color.orange);
g.fillOval(cannon.xPosition(),cannon.yPosition(),16,16);
/** drawTrail will draw a trail of smoke to indicate where a cannon ball has passed
* @param g - the graphics pen used to draw the trail.*/
public void drawTrail(Graphics g){}
/**drawGround draws the ground for which the cannon sits*/
public void drawGround(Graphics g) {
g.setColor(Color.green.brighter());
g.fillRect(0,400,600,50);
/** drawMovingCannonBall draw a cannon ball moving at a certain speed (velocity),
* with a certain amount of gravitational acting upon it, at a certain angle.
* @params g - the graphics pen used to draw the moving cannon ball.
* @params gravity - the value of gravity.
* @params velocity - the speed at which the ball is travelling.
* @params angle - the angle at which the ball was shot from.*/
public void drawMovingCannonBall(Graphics g, double gravity, double velocity, double angle){}
/** paintComponent paints the cannon,bucket
* @param g - graphics pen.*/
public void paintComponent(Graphics g) {
super.paintComponent(g);
drawGround(g);
drawBucket(g);
drawCannon(g);
drawCannonShots(g);
Controller
/** CannonController controls the interaction between the user and a cannon*/
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class CannonController extends JFrame{
public JMenuBar jMenuBar2;
public JMenu jMenu2;
public JMenuItem jMenuItem1;
public JMenu jMenu3;
public JMenuItem jMenuItem2;
public JLabel angleLabel, velocityLabel;
public JTextField angleTextField, velocityTextField;
public JButton fireButton, reloadButton;
public JSlider angleSlider, velocitySlider;
private CannonView view;
private Cannon cannon;
int oldValue, newValue;
public CannonController(Cannon acannon) {
cannon = acannon;
view = new CannonView(cannon);
loadControls();
angleTextField.setText(String.valueOf(angleSlider.getValue()));
oldValue = angleSlider.getValue();
newValue = oldValue + 1;
velocityTextField.setText(String.valueOf(velocitySlider.getValue()));
this.setSize(328,308);
this.setLocation(view.getWidth()-this.getWidth(),0);
/** loadControl loads all of the GUI controls that a
* user of the cannon animation will use to interact with the program*/
public void loadControls() {
jMenuBar2 = new JMenuBar();
jMenu2 = new JMenu();
jMenuItem1 = new JMenuItem();
jMenu3 = new JMenu();
jMenuItem2 = new JMenuItem();
angleLabel = new JLabel();
velocityLabel = new JLabel();
angleTextField = new JTextField();
velocityTextField = new JTextField();
fireButton = new JButton();
reloadButton = new JButton();
angleSlider = new JSlider();
velocitySlider = new JSlider();
jMenuBar2.setBorderPainted(false);
jMenu2.setModel(jMenu2.getModel());
jMenu2.setText("File");
jMenuItem1.setText("Exit");
jMenuItem1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
jMenuItem1ActionPerformed(evt);
jMenu2.add(jMenuItem1);
jMenuBar2.add(jMenu2);
jMenu3.setText("Help");
jMenuItem2.setText("About this Program");
jMenuItem2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
jMenuItem2ActionPerformed(evt);
jMenu3.add(jMenuItem2);
jMenuBar2.add(jMenu3);
getContentPane().setLayout(null);
setTitle("Cannon Controller Form");
setResizable(false);
setMenuBar(getMenuBar());
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent evt) {
exitForm(evt);
angleLabel.setText("Angle:");
getContentPane().add(angleLabel);
angleLabel.setLocation(10, 20);
angleLabel.setSize(angleLabel.getPreferredSize());
velocityLabel.setText("Velocity:");
getContentPane().add(velocityLabel);
velocityLabel.setLocation(10, 80);
velocityLabel.setSize(velocityLabel.getPreferredSize());
angleTextField.setToolTipText("Only numeric values are allow");
getContentPane().add(angleTextField);
angleTextField.setBounds(280, 20, 30, 20);
velocityTextField.setToolTipText("Only numeric values are allow");
getContentPane().add(velocityTextField);
velocityTextField.setBounds(280, 80, 30, 20);
fireButton.setToolTipText("Click to fire a shot");
fireButton.setText("Fire");
fireButton.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent evt) {
fireButtonMouseClicked(evt);
getContentPane().add(fireButton);
fireButton.setBounds(60, 160, 80, 30);
reloadButton.setToolTipText("Click to reload cannon");
reloadButton.setText("Reload");
reloadButton.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent evt) {
reloadButtonMouseClicked(evt);
getContentPane().add(reloadButton);
reloadButton.setBounds(150, 160, 80, 30);
angleSlider.setMinorTickSpacing(30);
angleSlider.setPaintLabels(true);
angleSlider.setPaintTicks(true);
angleSlider.setMinimum(0);
angleSlider.setMajorTickSpacing(60);
angleSlider.setToolTipText("Change the cannon angle");
angleSlider.setMaximum(360);
angleSlider.setValue(0);
angleSlider.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent evt) {
angleSliderStateChanged(evt);
getContentPane().add(angleSlider);
angleSlider.setBounds(60, 20, 210, 40);
velocitySlider.setMinorTickSpacing(5);
velocitySlider.setPaintLabels(true);
velocitySlider.setPaintTicks(true);
velocitySlider.setMinimum(1);
velocitySlider.setMajorTickSpacing(10);
velocitySlider.setToolTipText("Change the speed of the cannon ball");
velocitySlider.setMaximum(28);
velocitySlider.setValue(3);
velocitySlider.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent evt) {
velocitySliderStateChanged(evt);
getContentPane().add(velocitySlider);
velocitySlider.setBounds(60, 80, 210, 50);
setJMenuBar(jMenuBar2);
pack();
private void reloadButtonMouseClicked(MouseEvent evt) {
reloadButtonClick();
private void fireButtonMouseClicked(MouseEvent evt) {
fireButtonClick();
/** firstButtonClick is the event handler that sends a message
* to the cannon class to invokes the cannon's fire method*/
public void fireButtonClick() {
// JOptionPane.showMessageDialog(null,"You click Fire");
cannon.shoot();
view.repaint();
/** reloadButtonClick is the event handler that sends a message
* to the cannon class to invokes the cannon's reload method*/
public void reloadButtonClick() {
JOptionPane.showMessageDialog(null,"reload");
private void angleSliderStateChanged(ChangeEvent evt) {
angleTextField.setText(String.valueOf(angleSlider.getValue()));
view.rectangle.setAngle(angleSlider.getValue() * (Math.PI / 180));
view.triangle.setAngle(angleSlider.getValue() * (Math.PI / 180));
cannon.changeAngle(angleSlider.getValue());
view.repaint();
private void velocitySliderStateChanged(ChangeEvent evt) {
velocityTextField.setText(String.valueOf(velocitySlider.getValue()));
cannon.changeVelocityX(velocitySlider.getValue());
private void gravitySliderStateChanged(ChangeEvent evt) {
private void jMenuItem1ActionPerformed(ActionEvent evt) {
System.exit (0);
private void jMenuItem2ActionPerformed(ActionEvent evt) {
String message = "Cannon Animation\n"+
"Based on the Logic of Projectiles";
JOptionPane.showMessageDialog(null,message,"About this program",JOptionPane.PLAIN_MESSAGE);
/** Exit the Application */
private void exitForm(WindowEvent evt) {
System.exit (0);
/** Pause execution for t milliseconds. */
private void delay (int t) {
try {
Thread.sleep (t);
} catch (InterruptedException e) {}
public static void main(String [] args){
Cannon cn = new Cannon();
CannonController control = new CannonController(cn);
control.setTitle("Test");
control.setVisible(true);
if the cannon ball land in the bucket it should stop and the animation should indicate a 'hit' in some way. maybe by displaying a message.
if the cannonball hits the outside of the bucket it should bounce off.
Extra Notes.
1) The acceleration due to gravity is 9.8m/s to the (power of (2) eg s2.
2) The distance travelled in time t by a body with initial velocity v under constant acceleration a is:
v * t + a * t.pow(2) div 2;
The velocity at the end of time t will be v + a * t.
Distance is measure in pixels rather than meter so for simplicity we use 1 pixel per meter
When i pressed the fire button nothings happens. I'm going crazy. Please please help!

Here is the interface specification for the RotatablePolygon class. I do not have the actual .java source.
Thanks
Class RotatablePolygon
java.lang.Object
|
--java.awt.geom.Area
|
--RotatablePolygon
All Implemented Interfaces:
java.lang.Cloneable, java.awt.Shape
public class RotatablePolygon
extends java.awt.geom.Area
Polygons which can be rotated around an `anchor' point and also translated (moved in the x and y directions).
Constructor Summary
RotatablePolygon(int[] xs, int[] ys, int n, double x, double y)
Create a new RotatablePolyogon with given vertices and anchor point (x,y).
Method Summary
double getAngle()
The current angle of rotation.
double getXanchor()
x-coordinate of the anchor point.
double getYanchor()
y-coordinate of the anchor point.
void rotate(double da)
Rotate the polygon from its current position by angle da (in radians) around the anchor.
void rotateDegrees(double da)
Rotate the polygon from its current position by angle da (in degrees) around the anchor.
void setAngle(double a)
Set the angle of rotation of the polygon to be angle a (in radians) around the anchor.
void setAngleDegrees(double a)
Set the angle of rotation of the polygon to be angle a (in degrees) around the anchor.
void setPosition(double x, double y)
Shift the polygon's position to put its anchor point at (x,y).
void translate(double dx, double dy)
Shift the polygon's position and anchor point by given amounts.
Methods inherited from class java.awt.geom.Area
add, clone, contains, contains, contains, contains, createTransformedArea, equals, exclusiveOr, getBounds, getBounds2D, getPathIterator, getPathIterator, intersect, intersects, intersects, isEmpty, isPolygonal, isRectangular, isSingular, reset, subtract, transform
Methods inherited from class java.lang.Object
equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
Constructor Detail
RotatablePolygon
public RotatablePolygon(int[] xs,
int[] ys,
int n,
double x,
double y)
Create a new RotatablePolyogon with given vertices and anchor point (x,y).
REQUIRE: xs.length >= n && ys.length >= n
Parameters:
xs - x-coordinates of vertices
ys - y-coordinates of vertices
n - number of vertices
x - x-coordinate of the rotation anchor
y - y-coordinate of the rotation anchor
Method Detail
setPosition
public void setPosition(double x,
double y)
Shift the polygon's position to put its anchor point at (x,y).
Parameters:
x - new x-coordinate for anchor point
y - new y-coordinate for anchor point
translate
public void translate(double dx,
double dy)
Shift the polygon's position and anchor point by given amounts.
Parameters:
dx - amount to shift by in x-direction
dy - amount to shift by in y-direction
setAngle
public void setAngle(double a)
Set the angle of rotation of the polygon to be angle a (in radians) around the anchor.
Parameters:
a - angle to rotate to, in radians
setAngleDegrees
public void setAngleDegrees(double a)
Set the angle of rotation of the polygon to be angle a (in degrees) around the anchor.
Parameters:
a - angle to rotate to, in degrees
rotate
public void rotate(double da)
Rotate the polygon from its current position by angle da (in radians) around the anchor.
Parameters:
da - angle to rotate by, in radians
rotateDegrees
public void rotateDegrees(double da)
Rotate the polygon from its current position by angle da (in degrees) around the anchor.
Parameters:
da - angle to rotate by, in degrees
getAngle
public double getAngle()
The current angle of rotation.
getXanchor
public double getXanchor()
x-coordinate of the anchor point.
getYanchor
public double getYanchor()
y-coordinate of the anchor point.

Please Help with Physics Project Here are the codings

I've got three(3) classes a Model, a view, and a controller.
This is a project about projectiles.it is an animation of a cannonball being fired from a cannon and travelling under the effect of gravity.A cannon fired at angle 'a' to the horizontal and with an initial speed 's', will have an initial velocity given by:
vx := s * cos(a);//velocity x equals the speed multiply by the cosine of angle a.
vy := s * sin(a);//velocity y equals the speed multiply by the sine of angle a.
Here are the code.
Model:
/** Cannon specifies the expected behaviour of a cannon*/
public class Cannon{
public static final int TICK = 60;
private int velocity = 0;
private static final double gravity = .098f;
private double angle = 0;
// distances & positions are meausred in pixels
private int x_pos; // ball's center x-position
private int y_pos; // ball's center y-position
// speed is measured in pixels per `tick'
private int x_velocity; // horizonal speed; positive is to the right
private int y_velocity; // vertical speed; positive is downwards
public Cannon() {
velocity = 3;
angle = 60;
angle = radians(angle);
x_pos = 0;
y_pos = 385;
/** shoot fires a shot from the cannon*/
public void shoot(){
move();
/**reload reloads the cannon with more shorts*/
public void reload() {
/** changeAngle changes the angle of the canon
* @params value - the amount to add or subtract from the current angle value*/
public void changeAngle(double value) {
angle = (double)value;
angle = radians(angle);
/** getAngle returns the current angle value of the cannon*/
public double getAngle() {
return angle;
/** changeVelocity changes the speed at which a cannon ball that is to be fire will travel at
* @params value - the new speed at which the user wants a cannon ball to travel at.*/
public void changeVelocityX(int value){
x_velocity = x_velocity * (int)Math.cos(value);
public void changeVelocityY(int value){
y_velocity = y_velocity * (int)Math.sin(value);
/** getVelocity returns the current velocity value of the cannon*/
public int getVelocityX() {
return x_velocity;
public int getVelocityY() {
return y_velocity;
/** getGravity returns the current gravity value of the cannon*/
public double getGravity() {
return gravity;
public int xPosition(){
return x_pos;
public int yPosition(){
return y_pos;
public void move(){
double dx = getVelocityX() * Math.cos(getAngle());
double dy = getVelocityY() * Math.sin(getAngle());
x_pos+=dx;
y_pos-=dy;
double radians (double angle){
return ((Math.PI * angle) / 180.0);
View:
import java.awt.*;
import javax.swing.*;
/** CannonView displays a cannon being fired.*/
public class CannonView extends JPanel{
/** DISPLAY_SIZE specifies the overall display area of the cannon and the bucket.*/
public static final int DISPLAY_AREA_SIZE = 600;
public RotatablePolygon rectangle;
public RotatablePolygon triangle;
public Cannon cannon;
public CannonView(Cannon c) {
this.setPreferredSize(new Dimension(600,450));
this.setBackground(Color.black);
cannon = c;
int xRectangle[] = {0,0,40,40,0};
int yRectangle[] = {400,300,300,400,400};
int xTriangle[] = {0,20,40,0};
int yTriangle[] = {300,280,300,300};
rectangle = new RotatablePolygon (xRectangle, yRectangle, 5,20,350);
// rectangle.setPosition (100, 100);
// triangle = new RotatablePolygon (xTriangle, yTriangle, 4,0,290);
triangle = new RotatablePolygon (xTriangle, yTriangle, 4,20,350);
//triangle.setPosition (100, 100);
JFrame frame = new JFrame();
frame.getContentPane().add(this);
frame.pack();
frame.setVisible(true);
frame.setTitle("Width = " + frame.getWidth() + " , Height = " + frame.getHeight());
/** drawBucket draws a bucket/target for which a moving cannon ball should hit.
* @param g - the graphics pen for which the drawing should occur.*/
public void drawBucket(Graphics g) {
g.setColor(Color.red);
int xvalues[] = {495, 519, 575, 595, 495};
int yvalues[] = {340, 400, 400, 340, 340};
Polygon poly1 = new Polygon (xvalues, yvalues, 5);
g.fillPolygon(poly1);
g.setColor(Color.white);
g.fillOval(495, 328, 100, 24);
Graphics2D g2d = (Graphics2D)g;
g2d.setStroke(new BasicStroke(2));
g.setColor(Color.red);
g.drawOval(495, 328, 100, 24);
g.drawOval(495,311,100,54);
/** drawCannon draws a cannon
* @param g - the graphics pen that will be used to draw the cannon.*/
public void drawCannon(Graphics g) {
Graphics2D g2 = (Graphics2D)g;
g.setColor(Color.red);
g2.fill(rectangle);
g.setColor(Color.orange);
g2.fill(triangle);
g.setColor(Color.blue);
g.fillOval(95, 340, 60, 60);
g.setColor(Color.magenta);
for (int i = 0; i < 6; i++){
g.fillArc(95, 340, 60, 60, i* 60, 30);
g.setColor(Color.black);
g.fillOval(117, 362, 16, 16);
/** drawCannonShots will draw the actual number of shots already used by the cannon
* @param g - the graphics pen that will be used to draw the shots of the cannon.*/
public void drawCannonShots(Graphics g) {
g.setColor(Color.orange);
g.fillOval(cannon.xPosition(),cannon.yPosition(),16,16);
/** drawTrail will draw a trail of smoke to indicate where a cannon ball has passed
* @param g - the graphics pen used to draw the trail.*/
public void drawTrail(Graphics g){}
/**drawGround draws the ground for which the cannon sits*/
public void drawGround(Graphics g) {
g.setColor(Color.green.brighter());
g.fillRect(0,400,600,50);
/** drawMovingCannonBall draw a cannon ball moving at a certain speed (velocity),
* with a certain amount of gravitational acting upon it, at a certain angle.
* @params g - the graphics pen used to draw the moving cannon ball.
* @params gravity - the value of gravity.
* @params velocity - the speed at which the ball is travelling.
* @params angle - the angle at which the ball was shot from.*/
public void drawMovingCannonBall(Graphics g, double gravity, double velocity, double angle){}
/** paintComponent paints the cannon,bucket
* @param g - graphics pen.*/
public void paintComponent(Graphics g) {
super.paintComponent(g);
drawGround(g);
drawBucket(g);
drawCannon(g);
drawCannonShots(g);
Controller
/** CannonController controls the interaction between the user and a cannon*/
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class CannonController extends JFrame{
public JMenuBar jMenuBar2;
public JMenu jMenu2;
public JMenuItem jMenuItem1;
public JMenu jMenu3;
public JMenuItem jMenuItem2;
public JLabel angleLabel, velocityLabel;
public JTextField angleTextField, velocityTextField;
public JButton fireButton, reloadButton;
public JSlider angleSlider, velocitySlider;
private CannonView view;
private Cannon cannon;
int oldValue, newValue;
public CannonController(Cannon acannon) {
cannon = acannon;
view = new CannonView(cannon);
loadControls();
angleTextField.setText(String.valueOf(angleSlider.getValue()));
oldValue = angleSlider.getValue();
newValue = oldValue + 1;
velocityTextField.setText(String.valueOf(velocitySlider.getValue()));
this.setSize(328,308);
this.setLocation(view.getWidth()-this.getWidth(),0);
/** loadControl loads all of the GUI controls that a
* user of the cannon animation will use to interact with the program*/
public void loadControls() {
jMenuBar2 = new JMenuBar();
jMenu2 = new JMenu();
jMenuItem1 = new JMenuItem();
jMenu3 = new JMenu();
jMenuItem2 = new JMenuItem();
angleLabel = new JLabel();
velocityLabel = new JLabel();
angleTextField = new JTextField();
velocityTextField = new JTextField();
fireButton = new JButton();
reloadButton = new JButton();
angleSlider = new JSlider();
velocitySlider = new JSlider();
jMenuBar2.setBorderPainted(false);
jMenu2.setModel(jMenu2.getModel());
jMenu2.setText("File");
jMenuItem1.setText("Exit");
jMenuItem1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
jMenuItem1ActionPerformed(evt);
jMenu2.add(jMenuItem1);
jMenuBar2.add(jMenu2);
jMenu3.setText("Help");
jMenuItem2.setText("About this Program");
jMenuItem2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
jMenuItem2ActionPerformed(evt);
jMenu3.add(jMenuItem2);
jMenuBar2.add(jMenu3);
getContentPane().setLayout(null);
setTitle("Cannon Controller Form");
setResizable(false);
setMenuBar(getMenuBar());
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent evt) {
exitForm(evt);
angleLabel.setText("Angle:");
getContentPane().add(angleLabel);
angleLabel.setLocation(10, 20);
angleLabel.setSize(angleLabel.getPreferredSize());
velocityLabel.setText("Velocity:");
getContentPane().add(velocityLabel);
velocityLabel.setLocation(10, 80);
velocityLabel.setSize(velocityLabel.getPreferredSize());
angleTextField.setToolTipText("Only numeric values are allow");
getContentPane().add(angleTextField);
angleTextField.setBounds(280, 20, 30, 20);
velocityTextField.setToolTipText("Only numeric values are allow");
getContentPane().add(velocityTextField);
velocityTextField.setBounds(280, 80, 30, 20);
fireButton.setToolTipText("Click to fire a shot");
fireButton.setText("Fire");
fireButton.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent evt) {
fireButtonMouseClicked(evt);
getContentPane().add(fireButton);
fireButton.setBounds(60, 160, 80, 30);
reloadButton.setToolTipText("Click to reload cannon");
reloadButton.setText("Reload");
reloadButton.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent evt) {
reloadButtonMouseClicked(evt);
getContentPane().add(reloadButton);
reloadButton.setBounds(150, 160, 80, 30);
angleSlider.setMinorTickSpacing(30);
angleSlider.setPaintLabels(true);
angleSlider.setPaintTicks(true);
angleSlider.setMinimum(0);
angleSlider.setMajorTickSpacing(60);
angleSlider.setToolTipText("Change the cannon angle");
angleSlider.setMaximum(360);
angleSlider.setValue(0);
angleSlider.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent evt) {
angleSliderStateChanged(evt);
getContentPane().add(angleSlider);
angleSlider.setBounds(60, 20, 210, 40);
velocitySlider.setMinorTickSpacing(5);
velocitySlider.setPaintLabels(true);
velocitySlider.setPaintTicks(true);
velocitySlider.setMinimum(1);
velocitySlider.setMajorTickSpacing(10);
velocitySlider.setToolTipText("Change the speed of the cannon ball");
velocitySlider.setMaximum(28);
velocitySlider.setValue(3);
velocitySlider.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent evt) {
velocitySliderStateChanged(evt);
getContentPane().add(velocitySlider);
velocitySlider.setBounds(60, 80, 210, 50);
setJMenuBar(jMenuBar2);
pack();
private void reloadButtonMouseClicked(MouseEvent evt) {
reloadButtonClick();
private void fireButtonMouseClicked(MouseEvent evt) {
fireButtonClick();
/** firstButtonClick is the event handler that sends a message
* to the cannon class to invokes the cannon's fire method*/
public void fireButtonClick() {
// JOptionPane.showMessageDialog(null,"You click Fire");
cannon.shoot();
view.repaint();
/** reloadButtonClick is the event handler that sends a message
* to the cannon class to invokes the cannon's reload method*/
public void reloadButtonClick() {
JOptionPane.showMessageDialog(null,"reload");
private void angleSliderStateChanged(ChangeEvent evt) {
angleTextField.setText(String.valueOf(angleSlider.getValue()));
view.rectangle.setAngle(angleSlider.getValue() * (Math.PI / 180));
view.triangle.setAngle(angleSlider.getValue() * (Math.PI / 180));
cannon.changeAngle(angleSlider.getValue());
view.repaint();
private void velocitySliderStateChanged(ChangeEvent evt) {
velocityTextField.setText(String.valueOf(velocitySlider.getValue()));
cannon.changeVelocityX(velocitySlider.getValue());
private void gravitySliderStateChanged(ChangeEvent evt) {
private void jMenuItem1ActionPerformed(ActionEvent evt) {
System.exit (0);
private void jMenuItem2ActionPerformed(ActionEvent evt) {
String message = "Cannon Animation\n"+
"Based on the Logic of Projectiles";
JOptionPane.showMessageDialog(null,message,"About this program",JOptionPane.PLAIN_MESSAGE);
/** Exit the Application */
private void exitForm(WindowEvent evt) {
System.exit (0);
/** Pause execution for t milliseconds. */
private void delay (int t) {
try {
Thread.sleep (t);
} catch (InterruptedException e) {}
public static void main(String [] args){
Cannon cn = new Cannon();
CannonController control = new CannonController(cn);
control.setTitle("Test");
control.setVisible(true);
if the cannon ball land in the bucket it should stop and the animation should indicate a 'hit' in some way. maybe by displaying a message.
if the cannonball hits the outside of the bucket it should bounce off.
Extra Notes.
1) The acceleration due to gravity is 9.8m/s to the (power of (2) eg s2.
2) The distance travelled in time t by a body with initial velocity v under constant acceleration a is:
v * t + a * t.pow(2) div 2;
The velocity at the end of time t will be v + a * t.
Distance is measure in pixels rather than meter so for simplicity we use 1 pixel per meter
When i pressed the fire button nothings happens. I'm going crazy. Please please help!

Hi,
U put something on forum and keeping silence.If it is not necessary dont put in forum.I moved your cannon ball.If u want continous movement I need some more information.
Johnson

Help with Creative Volume Panel

Ok, so I just installed the latest version of my X-Fi Fatalty Champ drivers and the Creative Console. I restarted my computer and now I when I double click on teh Creative Volume panel, it doesn't open up. I can right click it and it brings up the Mode changer and all that stuff, but not the actually Volume Panel. How can I fix this? It has happened to me before but I have no idea what I did last tiem to fix it. This is really starting to get on my nerves. I could really use some help here, =/
-Pat

Hi Twiztid877,
I am sorry but since you are not getting any help here, our Customer Support might be able to help you further.

Help with left side panel area in lightroom 5

Similar Messages

Maybe you are looking for