Help with removing files on internal sw RAID
When I try to trash anything on a SW RAID I setup in Disk Utility I get "Operation could not be completed, error 1407."
The name of the RAID is: IntSATAStr
I've been Googling and searching for an hour with no luck.
Thanks ... Ken
I fixed it.
Didn't notice that repair disk was an option in Disk Utility for the built RAID.
Thanks ... Ken
Similar Messages
-
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Help with Upload file to Server Examples
I have been working with the examples for how to upload a file to the server. Though i got the example to work. there is one more thing i need to do. i need to allow the user to be able to select multiple files. In the example when you click on Upload, it opens a MS window to allow you to select a file. This example does not allow you to select more then one file though. I found another example for selecting multiple files but this one differs very much in that the person who make it "Ryan Favro" created a whole new GUI window to select multiple files. those his example works great, i dont want a special window to select files, i want the MS window to do it.
Is there a way to make the original example that uses the MS window to allow the user to select multiple files ?
I have attached the example that uses the MS window.Hi,
Use this code. May be it helps u.
fileuploadapp.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:com="test.*" layout="absolute"
creationComplete="initApp()" viewSourceURL="srcview/index.html">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
private const _strDomain:String = new String("http://localhost:8400/");
private const _strUploadScript:String = new String(_strDomain + "ProcessFileUp/UploadFile");
// Initalize
private function initApp():void {
Security.allowDomain(_strDomain);
]]>
</mx:Script>
<mx:Canvas width="400" height="300" horizontalCenter="0" verticalCenter="0">
<com:FileUpload
width="100%" height="100%"
uploadUrl="{_strUploadScript}"
uploadComplete="Alert.show('File(s) have been uploaded.', 'Upload successful')"
uploadIOError="Alert.show('IO Error in uploading file.', 'Error')"
uploadSecurityError="Alert.show('Security Error in uploading file.', 'Error')"/>
</mx:Canvas>
</mx:Application>
fileuoload.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:com="*"
layout="vertical" width="100%" minWidth="400" height="100%" minHeight="200"
title="Upload Files" creationComplete="initCom()">
<mx:Metadata>
[Event(name="uploadComplete", type="flash.events.Event")]
[Event(name="uploadProgress", type="flash.events.ProgressEvent")]
[Event(name="uploadCancel", type="flash.events.Event")]
[Event(name="uploadIOError", type="flash.events.IOErrorEvent")]
[Event(name="uploadSecurityError", type="flash.events.SecurityErrorEvent")]
</mx:Metadata>
<mx:Script>
<![CDATA[
import mx.controls.*;
import mx.managers.*;
import mx.events.*;
import flash.events.*;
import flash.net.*;
private var _strUploadUrl:String;
private var _refAddFiles:FileReferenceList;
private var _refUploadFile:FileReference;
private var _arrUploadFiles:Array;
private var _numCurrentUpload:Number = 0;
// Set uploadUrl
public function set uploadUrl(strUploadUrl:String):void {
_strUploadUrl = strUploadUrl;
// Initalize
private function initCom():void {
_arrUploadFiles = new Array();
enableUI();
uploadCheck();
// Called to add file(s) for upload
private function addFiles():void {
_refAddFiles = new FileReferenceList();
_refAddFiles.addEventListener(Event.SELECT, onSelectFile);
_refAddFiles.browse();
// Called when a file is selected
private function onSelectFile(event:Event):void {
var arrFoundList:Array = new Array();
// Get list of files from fileList, make list of files already on upload list
for (var i:Number = 0; i < _arrUploadFiles.length; i++) {
for (var j:Number = 0; j < _refAddFiles.fileList.length; j++) {
if (_arrUploadFiles[i].name == _refAddFiles.fileList[j].name) {
arrFoundList.push(_refAddFiles.fileList[j].name);
_refAddFiles.fileList.splice(j, 1);
j--;
if (_refAddFiles.fileList.length >= 1) {
for (var k:Number = 0; k < _refAddFiles.fileList.length; k++) {
_arrUploadFiles.push({
name:_refAddFiles.fileList[k].name,
size:formatFileSize(_refAddFiles.fileList[k].size),
file:_refAddFiles.fileList[k]});
listFiles.dataProvider = _arrUploadFiles;
listFiles.selectedIndex = _arrUploadFiles.length - 1;
if (arrFoundList.length >= 1) {
Alert.show("The file(s): \n\n• " + arrFoundList.join("\n• ") + "\n\n...are already on the upload list. Please change the filename(s) or pick a different file.", "File(s) already on list");
updateProgBar();
scrollFiles();
uploadCheck();
// Called to format number to file size
private function formatFileSize(numSize:Number):String {
var strReturn:String;
numSize = Number(numSize / 1000);
strReturn = String(numSize.toFixed(1) + " KB");
if (numSize > 1000) {
numSize = numSize / 1000;
strReturn = String(numSize.toFixed(1) + " MB");
if (numSize > 1000) {
numSize = numSize / 1000;
strReturn = String(numSize.toFixed(1) + " GB");
return strReturn;
// Called to remove selected file(s) for upload
private function removeFiles():void {
var arrSelected:Array = listFiles.selectedIndices;
if (arrSelected.length >= 1) {
for (var i:Number = 0; i < arrSelected.length; i++) {
_arrUploadFiles[Number(arrSelected[i])] = null;
for (var j:Number = 0; j < _arrUploadFiles.length; j++) {
if (_arrUploadFiles[j] == null) {
_arrUploadFiles.splice(j, 1);
j--;
listFiles.dataProvider = _arrUploadFiles;
listFiles.selectedIndex = 0;
updateProgBar();
scrollFiles();
uploadCheck();
// Called to check if there is at least one file to upload
private function uploadCheck():void {
if (_arrUploadFiles.length == 0) {
btnUpload.enabled = false;
listFiles.verticalScrollPolicy = "off";
} else {
btnUpload.enabled = true;
listFiles.verticalScrollPolicy = "on";
// Disable UI control
private function disableUI():void {
btnAdd.enabled = false;
btnRemove.enabled = false;
btnUpload.enabled = false;
btnCancel.enabled = true;
listFiles.enabled = false;
listFiles.verticalScrollPolicy = "off";
// Enable UI control
private function enableUI():void {
btnAdd.enabled = true;
btnRemove.enabled = true;
btnUpload.enabled = true;
btnCancel.enabled = false;
listFiles.enabled = true;
listFiles.verticalScrollPolicy = "on";
// Scroll listFiles to selected row
private function scrollFiles():void {
listFiles.verticalScrollPosition = listFiles.selectedIndex;
listFiles.validateNow();
// Called to upload file based on current upload number
private function startUpload():void {
if (_arrUploadFiles.length > 0) {
disableUI();
listFiles.selectedIndex = _numCurrentUpload;
scrollFiles();
// Variables to send along with upload
var sendVars:URLVariables = new URLVariables();
sendVars.action = "upload";
var request:URLRequest = new URLRequest();
request.data = sendVars;
request.url = _strUploadUrl;
request.method = URLRequestMethod.POST;
_refUploadFile = new FileReference();
_refUploadFile = listFiles.selectedItem.file;
_refUploadFile.addEventListener(ProgressEvent.PROGRESS, onUploadProgress);
_refUploadFile.addEventListener(Event.COMPLETE, onUploadComplete);
_refUploadFile.addEventListener(IOErrorEvent.IO_ERROR, onUploadIoError);
_refUploadFile.addEventListener(SecurityErrorEvent.SECURITY_ERROR, onUploadSecurityError);
_refUploadFile.upload(request, "file", false);
// Cancel and clear eventlisteners on last upload
private function clearUpload():void {
_refUploadFile.removeEventListener(ProgressEvent.PROGRESS, onUploadProgress);
_refUploadFile.removeEventListener(Event.COMPLETE, onUploadComplete);
_refUploadFile.removeEventListener(IOErrorEvent.IO_ERROR, onUploadIoError);
_refUploadFile.removeEventListener(SecurityErrorEvent.SECURITY_ERROR, onUploadSecurityError);
_refUploadFile.cancel();
_numCurrentUpload = 0;
updateProgBar();
enableUI();
// Called on upload cancel
private function onUploadCanceled():void {
clearUpload();
dispatchEvent(new Event("uploadCancel"));
// Get upload progress
private function onUploadProgress(event:ProgressEvent):void {
var numPerc:Number = Math.round((event.bytesLoaded / event.bytesTotal) * 100);
updateProgBar(numPerc);
var evt:ProgressEvent = new ProgressEvent("uploadProgress", false, false, event.bytesLoaded, event.bytesTotal);
dispatchEvent(evt);
// Update progBar
private function updateProgBar(numPerc:Number = 0):void {
var strLabel:String = (_numCurrentUpload + 1) + "/" + _arrUploadFiles.length;
strLabel = (_numCurrentUpload + 1 <= _arrUploadFiles.length && numPerc > 0 && numPerc < 100) ? numPerc + "% - " + strLabel : strLabel;
strLabel = (_numCurrentUpload + 1 == _arrUploadFiles.length && numPerc == 100) ? "Upload Complete - " + strLabel : strLabel;
strLabel = (_arrUploadFiles.length == 0) ? "" : strLabel;
progBar.label = strLabel;
progBar.setProgress(numPerc, 100);
progBar.validateNow();
// Called on upload complete
private function onUploadComplete(event:Event):void {
_numCurrentUpload++;
if (_numCurrentUpload < _arrUploadFiles.length) {
startUpload();
} else {
enableUI();
clearUpload();
dispatchEvent(new Event("uploadComplete"));
// Called on upload io error
private function onUploadIoError(event:IOErrorEvent):void {
clearUpload();
var evt:IOErrorEvent = new IOErrorEvent("uploadIoError", false, false, event.text);
dispatchEvent(evt);
// Called on upload security error
private function onUploadSecurityError(event:SecurityErrorEvent):void {
clearUpload();
var evt:SecurityErrorEvent = new SecurityErrorEvent("uploadSecurityError", false, false, event.text);
dispatchEvent(evt);
// Change view state
private function changeView():void {
currentState = (currentState == "mini") ? "" : "mini";
]]>
</mx:Script>
<mx:states>
<mx:State name="mini">
<mx:SetProperty name="height" value="60"/>
<mx:SetProperty name="minHeight" value="60"/>
<mx:SetStyle target="{btnView}" name="icon" value="@Embed('assets/application_put.png')"/>
</mx:State>
</mx:states>
<mx:transitions>
<mx:Transition fromState="*" toState="*">
<mx:Resize target="{this}" duration="1000"/>
</mx:Transition>
</mx:transitions>
<mx:Canvas width="100%" height="100%">
<mx:DataGrid id="listFiles" left="0" top="0" bottom="0" right="0"
allowMultipleSelection="true" verticalScrollPolicy="on"
draggableColumns="false" resizableColumns="false" sortableColumns="false">
<mx:columns>
<mx:DataGridColumn headerText="File" dataField="name" wordWrap="true"/>
<mx:DataGridColumn headerText="Size" dataField="size" width="75" textAlign="right"/>
</mx:columns>
</mx:DataGrid>
</mx:Canvas>
<mx:ControlBar horizontalAlign="center" verticalAlign="middle">
<mx:Button id="btnAdd" toolTip="Add file(s)" click="addFiles()" icon="@Embed('assets/add.png')" width="26"/>
<mx:Button id="btnRemove" toolTip="Remove file(s)" click="removeFiles()" icon="@Embed('assets/delete.png')" width="26"/>
<mx:ProgressBar id="progBar" mode="manual" label="" labelPlacement="center" width="100%"/>
<mx:Button id="btnCancel" toolTip="Cancel upload" icon="@Embed('assets/cancel2.png')" width="26" click="onUploadCanceled()"/>
<mx:Button label="Upload" toolTip="Upload file(s)" id="btnUpload" click="startUpload()" icon="@Embed('assets/bullet_go.png')"/>
<mx:Button id="btnView" toolTip="Show/Hide file(s)" icon="@Embed('assets/application_get.png')" width="26" click="changeView()"/>
</mx:ControlBar>
</mx:Panel>
Regards,
Shivang -
Help with removing my account name from the search...
Dear Sirs:
Due to a breach security in my P.I., I need to have my skype name to be removed from the search directory. Please help me.
Thanks,
GPHi, GP2013, and welcome to the Community,
Please take a look at this information: 'Can I delete my Skype account?' and then contact customer service for assistance. We here in the Community do not have access to Skype account details.
Here is a slightly annotated version of the instruction to file your request with Skype Customer Service, and to receive a reply via e-mail. Hope this serves as a useful road map!
Regards,
Elaine
How can I contact Skype Customer Service?
Skype offers help and support through:
The Skype Support website
The Skype Community
The Heartbeat blog
Skype blogs
Email and Live chat (for eligible customers)
To get help with the issue you’re experiencing:
Go to the Support request page. You will be asked to sign on to the Skype website at this step.
Select the topic you need help with and the problem you’re experiencing. ... or the closest topic which matches your enquiry. Some information that might help with your problem is displayed. These are the FAQ articles pulled from the library for your review.
If you still feel that the information doesn’t help, scroll down to the bottom of the website page and click the Continue support request button at the bottom of the screen.
Select your contact method. (We recommend that you check our Skype Community first. No need to circle back here, as the Community is where you started!)
If you chose email, enter your details, describe your problem, and then click Send support request. We'll get back to you as soon as we can.
We don’t currently provide telephone support.
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
Help with removing minor animation?
hello can smeone please help me remove this minr animation from this flash file. the animation i would like to remove is the one dat appears in the start and gives it the effec of moving the menu from left to rite. i have gone thoguh the all the movie clips and cant figure it out. im new with flash. fyi, i got this template from a site. i was able to remove lots of stuff but i cant get ridof the effect from left to right. if someoen can help me it will be greatly appreciated. also if u can explain it will be great. i wanna learn flash
how do i add the file? grrrrrrrrr i need some help.
-
Archive applet. Help with adding files to archive, then show.
I need help with this applet: http://pastebin.com/589064
The user is supposed to add, remove and open archives with text in it.
My problem is now the highlited area in the code (the lines with the @@'s).
This button should list all files i have added to the archive, however when i press the button, i only get a numberlisting. eg, if i have added 4 files to the archive I get: 0123
However I want the Joptionpane to show a listing of the files in the archive.
When I press "open" i can choose a file, press add, then open a new file, press add, and then when i click show archive, the filenames of the two files i added, should list through a Joptionpane..as you can see, i've tried, but i'm very unfamiliar with this.OK..i've done it
check out http://pastebin.com/589268
however, now i'd like to change the code, so that if i try to add to files with the same filename, the applet should show an error message..
How do i do that, please? :-) -
Help with removing person in photo
I'm fairly new to photoshop and am familiar with removing objects/content aware.In the link im trying to remove the person with the hat on and fix whats left over to make it look like water is there.Mostly though having trouble removing the lower part of the guy between his arms and keeping the water and plants there.
http://i.imgur.com/Ol4NQ2J.jpg
So my question would be what is the cleanest/pro way of removing the person and keeping it looking like the water and weeds are still there?thanks for the help.thank you Cadogan, I am glad you like the results. Here are a few images that might help:
this was the plane I made inside vanishing point, the idea is to ignore everything else and just try to focus at the river perspective. If your plane turns red or yellow you have an invalid plane that vanishing point can't really understand. play around with settings until you get a blue plane. once the plane looks good, hit ok to exit vanishing point.
create a new layer and go back to vanishing point, clone stamp some water from the top right area, until you get something like this:
as you can see I am overlapping his arms a lot, and cleaning up unwanted parts later by loading up the mask. play around with Levels to lighten up the water a bit and it should blend pretty well.
finally, add a new layer to clone stamp the weeds, these were the general areas I used:
please post again if you have any question, have fun! -
Can you help with rematching file names
After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
TonyBecause this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it? -
Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments. -
I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
Copy
The operation cannot be completed because you do not have sufficient privileges for some of the items.
OK
From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
HelpYou are probably better off using
ditto
In a terminal
man ditto
and read the description and instructions.
Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well. -
Need help with connecting file inputs to arrays
In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*; //Imports the Java library
class progB //Defines class
public static void main (String[] arguments) throws IOException
BufferedReader keyboard; //<-
InputStreamReader reader; // Allows the program to
reader = new InputStreamReader (System.in); // read the the keyboard
keyboard = new BufferedReader (reader); //<-
String name; //Assigns the name variable which will be parsed into...
int newnames; //...the integer variable for the amount of names.
int order = 0; //The integer variable that will be used to set the array size
String[] array; //Dynamic array (empty)
System.out.println (" How many names do you want to input?"); //This will get the number that will later define the array
name = keyboard.readLine ();
newnames = Integer.parseInt (name); // Converts the String into the Integer variable
array = new String [newnames]; //This defines the size of the array
DataInput Imp = new DataInputStream (System.in); //Allows data to be input into the array
String temp;
int length; //Defines the length of the array for a loop later on
for (order = 0 ; order < newnames ; order++) //<-
{ // Takes the inputed names and
System.out.println (" Please input name "); // gives them a number according to
temp = keyboard.readLine (); // the order they were inputed in
array [order] = temp; //<-
for (order = newnames - 1 ; order >= 0 ; order--) //<-
{ // Outputs the names in the reverse
System.out.print (" \n "); // order that they were inputed
System.out.println (" Name " + order + " is " + array [order]); //<-
for (order = 0 ; order < newnames ; order++) //<-
if (array [order].startsWith ("M") || array [order].startsWith ("m")) // Finds and outputs any and all
{ // names that begin with M or m
System.out.print (" \n "); //
System.out.println (array [order] + (" starts with M or m")); //
} //<-
for (order = 0 ; order < newnames ; order++) //<-
length = array [order].length (); //
if (length >= 5) // Finds and outputs names
{ // with 5 or more letters
System.out.print (" \n "); //
System.out.println ("Name " + array [order] + " have 5 or more letters "); //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with? -
I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.
-
Help with referenced files and importing
This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
Would any or all of these issues be resolved by moving to a managed file set up?
Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
Any insights would be appreciated. Thanks.It is not as complex as you are making it. Aperture is not per se an editor. It is for storing and organizing, and quickly decoding RAW images. It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
You don't want to have your images referenced so you can also edit them with other programs. That destroys the non destructive design of Aperture. If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
You need to read further as to how and why Aperture works the way it does.
Ernie -
Help with removing/deleting medical collection!
Hello!! I am new to this forum and I am so glad that I found it. The wealth of information shared on this site is remarkable. Thank You All!!! I am looking for guidance with removing/deleting a medical collection from my CR. I researched the HIPPA process and guidelines (which I know cannot be discussed on this site) but I have not heard back from the creator. My question is has anyone had success with removing a medical collection without using the HIPPA process? If so, can you please share your strategy with me? The CA is Sav-it Enterprises in NJ and the amount owed is $300 from 2011 and I am willing to pay in full, today, in order to get it deleted. I sent them a pay for delete letter and they sent me the statement from the doctor's office and updated the account with the CRA. However, I did notice that the date of first delinquency is incorrect, if that even matters. I don’t know what I should do now or how I should move forward with getting it deleted. Any information you can share with me will be extremely helpful. This is the only remaining collection account that I have and I need it removed in order to increase my scores to qualify for a mortgage. Thanks in advance.
Yes, I do have proof that they date is incorrect - its off by 1 year. Also, the billing statement they sent me shows the date as 2011 but they are reporting it as 2012. I also have explanation of benefits from my insurance provider which confirms that date as 2011. Okay. I will call them today to offer full payment and then send a GW letter shortly after paying. I really hope it works because I really need to get this removed.
Maybe you are looking for
-
I have all my lyrics for my songs in iBooks on my Ipad. Before updating to IOS8 when I called up a song only the lyrics came up. Now after updating to IOS 8 there is a header and bottom(showing the page). The header is cutting off my words and the
-
How should i know that i have or already installed these in my database?
my question regarding the steps in Post Installation Actions in installing patchset Oracle 9i Data Server 9.0.1 Patch Set 4 for Sun SPARC Solaris (32 bit Database) I'm not very sure about the instruction.. How should i know that i have or already ins
-
Monitor problem - cursor slips back onto macbook
Everything's working fine with the monitor displaying, then the cursor slips back onto the macbook, and the only way I've found is to switch the monitor off and disconnect it. Very annoying, has anyone found this, and found a solution?
-
Dear cons I want to create a purchase order for validity period of 3 month. that means we can enter G.R Upto 3 month. After that the system will not accecpt G.R. example- Creation date of P.O- 01.01.2008 on 01.04.2008 the system will not acccpt GO
-
HT2638 I am trying to rebuild Iphoto 11 Library
For some reason my iphoto library does not wanna work however the file is still there, trying to do a rebuild but hitting the command/option keys, In get a box that asks which library want to open and then get a error message, does not give me the op