Help with volume and screen rotation.

Having trouble with volume and rotation. I have gone through the setting and made changes to lock screen and mute, but now it seems I have to choose between the two. The switch on the side also is not working. Any suggestions?

1. If Side Switch is set to Mute, check to make sure it's not muted
http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
2. Check the Volume buttons
http://i1224.photobucket.com/albums/ee374/Diavonex/6a787edc3564e00c2ca6b70d4f236 e8b.jpg
3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

Similar Messages

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need headset with volume and mic keys

In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.

arvi2512 wrote:
In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.
Please take a look at the Nokia WH-920 Purity Headset - http://www.nokia.com/global/products/accessory/wh-920
Availability is limited and may vary per region.
Good luck

Need help with volume I can't get rid of and terminal

I own a external HD named "elements". One day a second volume appeared named "elements". Every time I tried to save files to my external HD they were written on this mysterious volume. The volume isn't showed on my desktop - only when I try to save something with Opera (browser) or in the terminal I can see it.
I renamed my external HD so I can write files to it. So far so good.
But how can I get rid of this volume? The finder does not show it. Spotlight does noch find it. Only in the terminal I can see this volume and I can see the files in it.
the terminal command "diskutil eject /volumes/elements" or "diskutil unmount force /volumes/elements" did not help.
what can I do?

It sounds like a "false clone" was created on your internal HD, which can happen if the target volume of a backup program becomes unavailable during the copy process.
Try this:
First eject and disconnect all external drives, then:
Finder>Go menu> Go to Folder
enter /Volumes and click Go
Don't touch the alias to your internal HD volume, or any other alias.
If you see "elements," and it is NOT an alias, trash it and empty the trash.
jd

Doing photo upside down why and screen rotation no working help

screen rotation no working its no locked
and camera doing photo upside down why

I tried to reset and still nothing

Thinkpad Twist with Windows 7 - screen rotation

So a client of mine bought the Twist with Windows 8 on it and really did not like windows 8 and asked me to repalce the install with Windows 7, wiping out the drives .... I managed to get all but 2 devices identified and install, one has an ID of PNP0C40 which is related to a button and the other one PNP0C60 is related to a convertable laptop display sensor.
The PNP0C60 is likely related to my problem, no screen rotation.
Is there a driver for this sensor that might work with Windows 7?
If the answer is, we do not support windows 7, could someone reccomend a forum where folks are trying to downgrade the Twist to 7? my searches come up with mostly amazon reviews.
Thanks, if anyone needs help with any of the other drivers for Win 7 on the Twist ... I'd love to help
Ken

I was in the same scenario, my company bought a Twist for testing but we want Windows 7 because we can't train everyone on using Windows 8.
I finally found a project on SourceForge that seems to be working great.
http://yeokhengmeng.com/2013/01/auto-rotate-screen
I had to install the ThinkVantage Active Protection System before the program would function.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014892
It's a simple install, you calibrate the different rotations of the laptop, read the README it will tell you how to get going, it takes 5 minutes.
I added it as a startup item for all users but I had to follow these instructions to get rid of a security prompt.
http://www.technipages.com/disable-publisher-could-not-be-verified-messages.html
I've been testing it and it's almost better than using the built-in button because it's automatic.

Help with Facebook and Social Media wigets (Was: How do I fix the three probs that...)

I am having problems with the facebook or social media widgets. I would like the link to send viewers to my facebook business page, but when testing it shows my pic and a 'switch' sign (see screen shot) and when I open the site the message is as the other screenshot, great, but I don't know where to find which 'asset' is the problem and why. Also why bother having child pages if the menu doesn't reflect that? I see that drop down menus are an issue, also with some other forum members.
Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
For some reason the facebook widget now loads the correct page, and I give up about the drop down menu, hopefully this will be addressed in the next update of Muse??

Hello,
For the "asset" issue, try locating the asset in the assets panel. It should have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
For the child pages in the menus issue, go to the menu options (by clicking the small blue arrow in the right top corner of the menu), and then change the menu type to "All Pages" instead of "Top Level Pages".
Hope this helps.
Cheers
Parikshit

Help with N8 and Adobe Premiere?

Hi, I am using Adobe Premiere Pro CS4 v4.1.0.
I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems.
The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz.
When I create a project and load the .mp4 file into it, the first problem I see is that it reads it as 500fps and the video is only a second or 2 long.
I then interpret the footage to the correct 25fps, and the video then works fine. However, the sound seems to not be there.
I've noticed that due to Premiere interpreting it as 500fps, it thus only plays the first second or two of the sound when left as 500fps and plays all the video in that second or two, and thus when changing to the correct 25fps, it is therefore only the two seconds playing over the entire minute of video.
I also tried changing the file into other formats. The only other one that kind of worked was .mov. It allowed the sound to work perfectly, the video loaded at correct frames, however, when playing the video on premiere, it then showed black screen for most of the clip.
Have tried to find out about this online and installed a couple different codec packs and media players, but nothing helped with this problem in Adobe Premiere. However, the clip played fine in the media players, such as RealPlayer.
If anyone has any advice on this, it would be appreciated. I would prefer to fix this issue correctly rather than have to manually interpret or transcode the footage each time I want to edit it.
Btw, I also posted this question on a forum with Nokia N8 Users, and others also tried it out and had same or similar issues. They also tried on CS5 and it still didn't work.
*UPDATE* I just tested again to change the file from .mp4 to .mov by simply renaming it, and this time it loaded perfectly into Premiere. However, I have to do this on my XP computer, as my Windows 7 doesn't change the format of file by simply renaming it. Hence, I would still like help with getting it to recognise the .mp4 correctly though in the first place, rather than having to rename my files each time on the XP computer.

Moshpit84 did you utilize the uninstallers located in Applications/Utilities/Adobe Installers to remove your installation of Premiere Pro? Also what version of the Adobe Application Manager are you currently using?

Help with Recovery and Time machine

So a friend of mine sent me her laptop to change hard drives. She also sent her Time machine external HDD. I used her drive as a recovery disc using the Lion recovery tool. I didnt see or didnt read any where that stated the drive would be unusable afterwards. But after restoring OSX and moving her data back from the old drive I cant seem to get the Time Machine disc contents. So im trying to get the data from the drive without completely wiping it.
Any suggestions?
She has 13 (black)book late 2007
running 10.7.4

You should not restore a Time Machine backup from one Mac to another one, especially a new one.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Help with Title and Author Displaying on the iBooks Bookshelf.

I have created a book using iBooks Author and connected my iPad to my iMac to Preview my book, the book previews correctly the information I have entered into iBooks Author, however when you look on the iBooks Bookshelf it says UNKNOWN TITLE and UNKNOWN ARTIST even though I have entered this on my title page in iBooks Author, however the icon of my book on the iBooks Bookshelf is showing correctly the photo on the cover and the title and author, can any one help with this please?
Also no Category is showing against my book onthe iBooks Bookshelf how do I add one please?

To be honest, you should really put this under a seperate post of your own, but I'm not here to whine...
It sounds that you haven't defined the book title yet.
Open your book in iBooks Author and go to the panel on the left-hand side of your screen that shows your page thumbnails. Scroll to the top of this box, and find the panel that has the:
Book Title
Intro media
Table of contents
Glossary.
If your Book Title here says simply 'Book Title', then define it by double-clicking on the 'Book Title' text in the thumnails panel, and type in your book's title.
HTH.

Need help with ipohne, white screen!!

i got given a iphone and had to get the screen fixed on it so i bought a kit , but the only thing is when its turned on it only lights up with a white screen. you can touch the screen and it makes noises and so fourth but you cant see anything but a white screen, i have no clue what to do ... HELP PLEASE!!!

Since the screen turns off see if:
- Placing the iPod in Recovery mode will allow a restore via iTuns.
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you still have the problem the it appears that either the drop caused other damage or upi damaged the iPod or did something incorrect whenyou replaced the screen
BTW, the white screen of death is when the screen turns white AND you can turn it off.

Need help with archive and install

I'm doing and archive and install. The first try was with a defective retail version of OS X Tiger, which did part of the job then stalled. Now I've been able to get a good DVD of this and was able to do an archive and install,although I couldn't check the box to save user settings etc., On the screen it gives me 3 options transfer info from another mac, transfer info from another partition on this mac or do not transfer my info. I'm new to all this, because of the first failed archive and install do I transfer the info from another partition or not transfer at all and find the old folder later on in the process?

Hi D,
I couldn't check the box to save user settings etc.
I think that is due to the partial previous install moving things to a Previous System folder, but not finshing.
Let's see if that's what happened... if you have 2 Macs with Firewire this could be a lot easier.
Oh, do you have a Backup?
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
After quitting DU, look for Terminal in that Menu Bar, open that and type in this...
Wait, let's hear if you have another Mac or Boot Disk first...

Copying a preogram with includes and screens

Hi Experts,
I'm trying to copy a program with all includes and screens in ecc 6.0 version. But I am not able to find the screen for the copied program. I have selected the check box for screens also. What might be the problem?
Thanks
Naidu

Hi Naidu,
Use nugget to download and upload.
use this links
How to install the SAPlink plugins
Hope this will help you.
Regards,
Vijay

Help with volume and screen rotation.

Similar Messages

Maybe you are looking for