Help XSLT Data Mapper and Transformations

Hi guys,
I need help in oracle ESB (XSLT Data Mapper and Transformations). I need to use the XSLT Data Mapper and Transformations using Response XML to Request XML.
Thanks
Vyas

The concept is the same as BPEL. Without going into too much detail have a look at the folowing tutorial.
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28212/buildendtoend.htm#BEICEFJD
Near the bottom they show how to do transformations.
cheers
James

Similar Messages

Selective data load and transformations

Hi,
Can youu2019ll pls clarify me this
1.Selective data load and transformations can be done in
    A.     Data package
    B.     Source system
    C.     Routine
    D.     Transformation Library-formulas
    E.     BI7 rule details
    F.     Anywhere else?
If above is correct what is the order in performance wise
2.Can anyone tell me why not all the fields are not appear in the data package data selection tab even though many include in datasource and data target.
Tks in advance
Suneth

Hi Wijey,
1.If you are talking about selective data load, you need to write a ABAP Program in the infopackage for the field for which you want to select. Otherway is to write a start routine in the transformations and delete all the records which you do not want. In the second method, you get all the data but delete unwanted data so that you process only the required data. Performancewise, you need to observe. If the selection logic is complicated and taks a lot of time, the second option is better.You try both and decide yourself as to which is better.
2. Only the fields that are marked as available for selection in the DS are available as selection in the data package. That is how the system is.
Thanks and Regards
Subray Hegde

F4 help for Date field and Validation

Hi Friends,
I am new to BSP programming .I knew getting F4 help in normal ABAP.But i don't know in BSP .
I want simple steps to get F4 for a field on Page as well as date field .
and How to valid those entered dates.
Presently i am using length 10 character variable for DATE without F4 help and No validation.
I think you guys will help me out.
Thanks,
Venkat.O

Welcome to SDN.
for F4 help with validation for dates you can use the following code.
<htmlb:inputField id         = "wf_ad_date"
                                type       = "date"
                                showHelp   = "TRUE"
                                value = "<%= sy-datum %>"
                                visible    = "true"
                                disabled   = "false"
                                required   = "true"
                                maxlength = "10"
                                size       = "10"
                                doValidate = "true"
                                design     = "standard" />
For other type of fields check out this weblog by Thomas Jung
<a href="/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30 Value Input Help Popups Version 3.0</a>
Regards
Raja

Master Data cleansing and transformation from non-SAP source systems

Hi all,
Our client (Media)wants to cleanse and transform his master data from non-SAP source system to be uploaded into BW (no R/3 yet). If anybody has a document regarding this topic that i could use, i will appreciate if u sent it to me.
thanks.

Hi,
https://websmp203.sap-ag.de/~sapidb/011000358700001965262003
https://websmp203.sap-ag.de/~sapidb/011000358700006591612001
https://websmp203.sap-ag.de/~sapidb/011000358700001971392004
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000471477&_OBJECT=011000358700008927932002E
/manfred

Help to do data mining and transformation...

I have a specific task to accomplish and I am wondering if Oracle Data Mining is the correct tool to use, and if not what possibly might be. Here is brief description:
I have a table with about 500 millions rows of data per day, transactional internet traffic data. It contains about 20 columns/dimensions. The requirement is to transform this flat data into a new table that contains (as one column each) each unique variation of those dimension values recorded.
So for example, if we have 3 dimensions of say gender, age and zip code we would determine each unique combination of those found in the actual data and write out x number of columns to identify them and store a count value for each one. The count will just tell us how many of that combination was found in the data, and the end result will be of course an aggregated table for fast querying on all observed dimensions.
For performance reasons we want to pass through the data only only.
We tried cubes but this takes too long (because it also tries to build out all the non-observed combinations), and we know we could try a code approach but fear this may take too long also. The problem is more of a performance one of course, with that many rows and possible combinations to consider.
Any ideas?
Thanks in advance.

After doing some research I realize what I need is a cube, but one that does not contain every single dimension combination but only those that actually exist (to speed up the creation time and reduce storage space). Is this something Oracle supports? Anyone?

Help with data imports and identifying correct contact

Hi Guys,
I am looking to import some data from a csv into a table called 'interactions'
This table is linked to contact via a 1-to-many relationship.
when I am importing data often I get errors saying that it cant determine which contact to use because we have contacts with the same name.
Is there anyway I can import data into the 'interaction' table and not only say which contact this is attached to but also provide some more information such as the contacts parent account so that it can identify the correct contact more often and leave
me less that I need to add manually?
Many thanks in advance

The data import wizard is built into CRM. You can now place csv files of different entities into a single zipped file to do a sort of pseudo batch import.
It may be helpful to download a template of the import file for the entity that you want to import. This can be downloaded within CRM. The benefit is that you are given the column headings. And when you hover over a column heading, it tells
you the data type it will expect. I will use the template and just copy and paste the data in from another spreadsheet if I get the data from a user. The import runs smoother then.
If you have the resources, there are 3rd party tools such as Scribe that can import data from different sources into CRM. A bit costly but you can get a trial version to test. The trial may only be good for 2 weeks. But it offers the ability
to transform data if necessary for the import.
Jason Peterson

HELP - no date/time and clip order is weird

Hello,
I have a feeling I have seen people with the same problem as I have now but I haven't found a good answer on what to do. First of all, after having capture my clips into Premiere CS3, the date/time of the clips are obviously not in the app - can't find them anywhere so a workaround is to use paper and pen and look at the timestamp of the camera when a shot was taken. Not so good. It is weird that I can't make this date/time marking of clips work - even KISS apps like WMM does this very easily. Anybody?
But last time I run into a tricker problem. After capture I had a greater number of clips, and now I can't sort them in any sensible order. Maybe they were initally sorted chronologically but after having reordered for some other reason the chronological order seems impossible to revert to.
Also the automatic clip naming seem to be of no help:
Untitled Clip 01 01 9
Untitled Clip 01 01 10
Untitled Clip 01 01 11
Untitled Clip 01 01 12
Untitled Clip 01 02 7
Untitled Clip 01 02 8
Untitled Clip 01 02 9
Untitled Clip 01 02 10
Untitled Clip 01 03 4
Untitled Clip 01 02 5
seems to have the cronological order
Untitled Clip 01 01 9
Untitled Clip 01 02 7
Untitled Clip 01 03 4
Untitled Clip 01 01 10
Untitled Clip 01 02 8
Untitled Clip 01 02 5
etc
Anybody who can give me some advice about this. This is very time consuming and annoying...
Thanks
/D

Sorting by media start assumes all on the same tape and only one tape per bin. Might not be the case always, especially if you want to match up shots from several cameras using datacode. That's why I use Scenalyzer to put date/time in the filename.
Adobe didn't mention displaying datacode in their spec, so it shouldn't really be too much of a surprise to find it isn't included.
Since I don't use PPro's capture, I don't know the subtleties of the results of opting to split capture files into scenes. Does that give any hints in filename or logging etc?
If you want extra datacode facilities in CS5 (gossip says CS4 is beyond the new feature stage), then best submit a request via
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Help with date format and sql

Hi
I am a complete oracle idiot.
I have created a table with 2 columns po_id,po_date. Yhe id data type is number,date type is date. To add values to the table i enter something like
"insert into purchase_orders(po_id,po_date) values(1,01/01/2004)"
It does not accept the date and will not add the record, i have also tried the date format 01-Jan-2004.
What is the proper way to add the date.
Thanks
Garry

You probably want to use an explicit to_date cast. That lets you specify the format of the date string, i.e.
INSERT INTO purchase_orders( po_id, po_date )
VALUES( 1, to_date( '01/01/2004', 'DD/MM/YYYY' );Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

XSLT Vs Data Mapper.

Hi,
What will be the difference between Siebel Data Mapper and XSLT ? One of the difference that I have identified is that XSLT's can be used to convert one XML to other without the need to have an IO defined like in data mapper.
Apart from this I have failed to recognize any major difference.
Please share if any one of you have any other difference which can help decide when do we go for XSLT ?
Thanks :-)

Hello,
I found a workaround to the problem :-) you need to close JDeveloper and relaunch it. The linking of the two sides is then possible.
Jon

Illustrator Data Sets and Variables Help Please

Hi, how's everyone doing? I need a little help with Data Sets and Variables, or at least i believe that's what i need help with. Ultimately i am trying to run an action on a batch of files.
I have an eps file with two images placed side by side. They are the same image. I am trying to replace both images and save the file accordingly. Trying to make this happen using a bunch of files. All the files can be in one folder and will be the same size.
I hope this make sense and what i need done is doable.
Any help or advise would be greatly appreciated.
Thanks in advance.

Not sure a I read you correctly but if I understand you
what you have to do is make the first two images as dynamic variables using the variable panel and save it as a data set
then replace those two images and save those as a data set
So now you have data set one and two.
You can save that as an variable library (xml)and that can be loaded into other documents.
The question is can it be actioned?
It can be scripted and do you want the same two images to replace the same two image in each document.
I think you really have to tell us more.

Difference between Data staging and Dimension Table ?

Difference between Data staging and Dimension Table ?

Data Staging:
Data extraction and transformation is done here.
Meaning that, if we have source data in flat file, we extract it and load into staging tables, we take care of nulls, we change datetime format etc.. and after such cleansing/transformation at then end, load it to Dim/Fact tables
Pros: Makes process simpler and easy and also we can keep track of data as we have data in staging
Cons: Staging tables need space hence need memory space
Dimension Table:
tables which describes/stores the attribute about specific objects
Below is star schema which has dimension storing information related to Product, Customer etc..
-Vaibhav Chaudhari

Data Mapper to relational database

I've been reading the "Patterns of Enterprise Application Architecture" book and it has opened my mind to a lot of different designs.
I'm trying to design a large accounting system in OO. I'm unclear on how I should design the mapping inbetween the domain logic and database.
Should the controller classes talk to the data mappers?
In inheritance if my classes don't directly relate to tables should I have one data mapper or one for each class?
When I'm using a data mapper and I select all from a table does the mapper create multiple objects or does it return a result set?
If it creates multiple objects how does the domain logic sort this data?
Do I really need a Unit of Work to manage my data mappers? How hard are they to create? Is there only one Unit of Work class for all data mappers?

I've been reading the "Patterns of Enterprise
Application Architecture" book and it has opened my
mind to a lot of different designs.Usually the worst time to apply the stuff, because you're looking to use it before you really understand. But there must be a first time for everything. Great book, though.
I'm trying to design a large accounting system in OO.Wow, is this for personal education or a paid gig? I hope it's the former. If not, make sure that "build versus buy" is part of the decision. Would anybody write an accounting package in this day and age, with SAP, Oracle, QuickBooks, Great Plains, and a thousand others ready to buy?
I'm unclear on how I should design the mapping
inbetween the domain logic and database.
Should the controller classes talk to the data mappers?Depends on what you call controllers. I like to think of them as the classes that implement the service interfaces. The methods in the service interface are the use cases. I think the distinction between controller and service is very important, because a web-based app will certainly have a controller. If you fall into the trap of putting all the logic into that class, you can't use it WITHOUT the web controller. It also puts you right in line to turn this into a service oriented architecture.
The services will certainly call the persistence interface. Make sure you have one.
In inheritance if my classes don't directly relate to
tables should I have one data mapper or one for each
class?That's one way to do it.
When I'm using a data mapper and I select all from a
table does the mapper create multiple objects or does
it return a result set?I think it ought to return a Collection of objects. You should never return a ResultSet. That should be instantiated and closed within the scope of the persistence layer. ResultSets are database cursors, a scarce resource. They should be kept open for the shortest time and scope possible.
If it creates multiple objects how does the domain logic sort this data?You won't ask for all of them unless you have something sensible to do with them. If you're referring to the literal "sort", it's an easier question. Have the database do an ORDER BY in the SELECT. Hard to tell what you mean by this.
Do I really need a Unit of Work to manage my data mappers? You do if you need ACID properties for transactions.
So you're going to try to do all of this by hand? A hard job, indeed. You're talking about writing your own transaction manager.
How hard are they to create? Is there only
one Unit of Work class for all data mappers?I haven't read Fowler's book in a while, and I don't have it handy, but it's one Unit of Work per transaction when I think about the term. What you need is something that will demark transaction boundaries.
If you weren't writing this yourself, you'd be using JTA (Java Transaction Architecture.) That's what I'd recommend that you do.
But if this is an educational effort, knock yourself out.
%

Using XML extraction from Oracle and XSLT data transformation

Hi
How can transfer data ie: Using XML extraction from Oracle and XSLT data transformation with java application?
usually i use to do querying sql, getting data from table assinging to model class then send it to UI. how can i go for XML extraction form oracle?
thanks

Sorry, I don't understand what exactly you want to do. And I'm under the impression that you might not know exactly what you want to do as well. Could you explain a bit more detailed what you want to achieve?

Can we cleanse and transform data at flat file or external table level?

Hi,
I have some data that I want to cleanse and transform. I don't want to cleanse it after i populate the external table, I want to get done with it at flat file level or while populating the external table. Can we cleanse and transform data at flat file or external table level through Oracle or OWB 11.2? Is it possible to run a conditional load (i.e. having a where clause or if-else-then) for an external table? Can we call oracle functions for an external table at the time of creation?
Thanks in advance.
Regards,
Ann.

Hi Oleg,
Thanks a lot for the clarification. :)
So is there a way that I can clease the data within the text file through Oracle or OWB? I have datatype mismatches in the data and most of my data is getting rejected because of that. The way I can think of, for solving this problem, is to create the external table with all fields with datatype varchar and then cleansing the data. But it doesn't seem very effecient plus it will get very complicated because I have almost 80-90 fields.
Any help?
Thanks and regards,
Ann.

Need help with date and time calculations please

Hello there.. Im stuck, and im hoping someone can help..
Working on a list to manage and track PTO. User completes PTO request form,
Fields
Name
Start Date (with time)
End Date (with time)
Total Number of Days/hours requested: (calculation)
Full Day: (Yes/No)
ok business need
user has the ability to request a certain number of hours as opposed to a full day.
After searching around on google. I found this calculation to help me figure out how many BUSINESS days being requested.
=IF(ISERROR(DATEDIF([Start Date],[End Date],"d")),"",(DATEDIF([Start Date],[End Date],"d"))+1-INT(DATEDIF([Start Date],[End Date],"d")/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End
Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End Date])=7),1,0))
This works great as long as its a [Full Day]="YES", displays results in column labeled Number of days
now if [Full Day]="No", displays results in column labeled Number of Hours
BUT this is my issue (well part of it) it calcuate the correct number of hours.. but puts a "1" in "Number of Days" why.. dates have not changed.. I think Its something with the above calculation but I could be way off.
the end result is I need number of days to concat with number of hours
i.e 1 full day 4 hours 1.4
0 full day 5 hours 0.5
1 full day 0 hours 1.0
so that the total can be deducted via workflow.. from the remaining balance in a tracker. (seperate list)
Any angels out there??

Posnera-
Try changing time zones and see if the travel itinerary times change.
Fred

Help XSLT Data Mapper and Transformations

Similar Messages

Maybe you are looking for