Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

If you use a legitimate replacement part it should work fine

Similar Messages

If I bought an iMac from America would there be any differences/problems?

I live in Australia. If I bought an iMac from America would there be any differences/problems with me using it in Australia & connecting it to other Apple products (that were purchased in Australia)?

For that matter, you will receive cables which are incompatible with Australian electrical mains outlets.
Therefore, you will need a plug adapter.
You should also check with Customs for duties and import regulations and restrictions.
In my country, for example, all electrical devices imported from outside the EU are subject to duties and VAT and, if they are radios, TVs or any comparable device (and an internet-enabled PC is considered comparable), they must also be approved by the Department of Communications for compliance to radio frequency standards. In some rare cases, approval may be denied, most of the time it costs a very high fee.

There's any difference between the 2 ways

i need to update specific infotype record.
there's 2 ways:
1) update the specific record the disadventage is that
   the update doesn't pass sap date check from the screen.
   in addition, i can't use batch input because while i
   lock the employee i need to update other record.
2) from dynamic event in modify record.
   in this way it's pass sap date check ? ?
for finally, is there any difference between the 2 ways ?

Hi,
If you use the BAPIs 'BAPI_EMPLOYEE_ENQUEUE' & 'BAPI_EMPLOYEE_DEQUEUE'
before and after each function call to 'HR_INFOTYPE_OPERATION', you should be able to update mutiples infotype records for the same employee in a single Program.
2). Are you referring to Dynamic Actions?
Regards,
Suresh Datti

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Any difference in the architecture of VC 7.0 and VC 7.1

Hi All,
Can anyone explain me if there is any difference in the architecture of VC 7.0 and VC 7.1
Also, is there any diff in terms of browsers for the applications deployed on Adobe Flex and WD HTML
Nikhil Bansal

Hi,
Check the below Blog .for Arctitecture Differences between VC7.0 and VC7.1 .
SAP NetWeaver Visual Composer
The Mian differences b/w the Adobe Flex and the HTML Runtimes is Look and feel.
Adobe Flex or Flash will give you Very rich good look and feel when compared to HTML ,and also it supportes so many fetaures in VC.
HTML Runtime is very Old Run time in VC
Thansk,
Govindu

Is there any difference between the digital connection cables?

Is there any difference between digital connection cables that connect to the back of a computer? I've seen some with two groups of nine pins and a blade. I've seen some with a solid group of 27 pins. I've seen the blade pin and the four pin. I currently run one that has two groups of nine pins with a blade pin. I use it for DVI and it does ok. I wanted to look into the HDMI cable and see how or if things would be different. I bought a cable that has the 27 pin connector with a blade. It physically connects but there is no signal. I checked the monitor and I set it first to HDMI and then tried AUTO. It made no difference. I powered it all down and restarted it all and there was no difference. Do I need to keep looking for a cable that has the same design connection to the PC but has the HDMI connection on the other end. I may have this info wrong. I just know I have two large connections at the time but the last cable I tried had one large connector and one that looked like an advanced USB design. And then is there really any gain between the two as far as video quality or response?

There are several type of connectors/cables with different effect.
VGA
DVI
HDMI
To understand more, I would say please look it up.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

The are any difference between the late 2008 and early 2009 15' MacBook Pro

Hello,
This is my first post here so I salute you all. I would like to know if there is any difference between the 15 inch MacBook Pro produced at the end of 2008 and the one produced AFTER iLife 09 has been launched (at the beginning of 2009). I see that the declarations of conformity are a little bit different: http://images.apple.com/euro/compliance/pdf/M98EMC_IntE_EuroDoC.pdf vs http://images.apple.com/euro/compliance/pdf/M98AIntE_EuroDoC.pdf (see the Emissions and wireless radio equipment sections). I don't know if those declarations are relevant and if the fact that they complies with different standards and/or directives means that the hardware is different... What do you think?
Just a little note: I am NOT talking about the late 2009 17' version. I'm referring only at the 15' versions produced before and after the launch of iLife09
Message was edited by: vamist

Hi, I think I know why Apple is able to offer 8gb ram support on the revised 2.66 MBP and not on the 2.53 or 2.4 MBP.
Take a look at this:
15'' 2.4-2,53 NVDA Chipset
http://s1.guide-images.ifixit.com/igi/oEmmaxSOKDDvZfZh.large
17'' NVDA Chipset
http://s1.guide-images.ifixit.com/igi/SSLSgODWYbiIuTLL.large
There are TWO different revisions. The first is B2 and the latter is B3.
I think that the former does not support 8GB of RAM and the latter does. That explains why the 17'' has support and now the NEWs 15'' also have, Apple gave the 15'' not only a speed bump but also the newer revision of the chipset!

Would there be any impact on MP functionality in a MUI enviornment

I am validating my MP on the latest version of System Center. Wanted to know if the OS has MUI enabled, would there be any impact on the MP functionality given that System Center strings are English only irrespective of the whatever the languages
is set using the MUI.

Hi, no impact on functionality
http://technet.microsoft.com/en-us/library/hh457558.aspx
http://msdn.microsoft.com/en-us/library/ee533664.aspx

I'm having my replacement iPod touch 5th generation in a week, will there be any differences in comparable to the non-replacement iPod touch?

I'm having my replacement iPod touch 5th generation in a week, will there be any differences in comparable to the non-replacement iPod touch?

No.

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

''duplicate of https://support.mozilla.com/en-US/questions/905881''
Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

Hi Kossa,
You can also check if the issue occurs in
Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
Besides, uninstall it and re-download
a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
J
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Regards,
Linda

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hi O_H_I_O,
Have you got an error code ?
Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
Apart from this ,we can run the built-in tool to a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
We also can run the following fixit tool to have a check.
Fix problems with CD or DVD drives that can’t read or write media
http://support.microsoft.com/mats/cd_dvd_drive_problems
Best regards

Is there any difference of the Downloading speed of Folio if i'm in Enterprise or Professional Editi

Hi Adobe,
I have compared the downloading time between Adobe Multi-Viewer and Zinio App(also hosting digital magazine), I found out that it is so much faster in Zinio.
Are there any difference of the downloading speed if let's say the I'm in Enterprise or in Professional edition?
Thank you for the response!

There is no speed throttling that I’m aware of.
Bob

Does anyone know if there is any difference at all in the display between the 4 and the 4s. I use my 4 with no problems but have issues with the 5 - makes me feel ill. Any help appreciated before I make an expensive mistake

Can anyone tell me if there is any difference at all in the display between the 4 and 4s. It appears they are the same from the specs but I dont want to make an expensive mistake. I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.

In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast. I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable. There are no differences however, that are noticeable by the user.

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Is there any difference between the 2 different USB cords when syncing???

I know this may be a paranoid question to ask but I just wanted to make sure.
Is there any difference between the newer USB cords with the shorter plug (the end that goes into the iPhone) and the older ones with the bigger, square-shaped plugs that you can pinch on the sides to retract?
Is there a difference in transfer speed, syncing speed, or reliability, or build quality?
Just asking cuz the newer USB cord that came with my iPhone 3GS is getting frayed and so I'm using the older one instead.
Thanks to whoever helps.

No difference except, as you noted, you have to squeeze the older one to remove it. It's important that you do that so you don't damage it or the iPod.

Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

Similar Messages

Maybe you are looking for