Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???
Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?
Similar Messages
-
Bonjour
Je souhaiterais savoir s'il est possible de bloquer l'ipod touch par wifi si celui -ci se connecte, suite à un vol.Google translate:
Hello I would like to know if it possible to block the ipod touch via wifi if it connects after avolBonjour I like to know if it possible to block the ipod touch via wifi if it connects through theft
No. Apple says:
Apple does not have a process to track or flag lost or stolen product
http://support.apple.com/kb/HT2526 -
I synced by ipod touch with itunes and it wiped all my music. Now itunes does not recognise my ipod. How can i fix this?
Here
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Does the iP{od work OK
Does it charge when connected? -
Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions
What happens when you try to restore? Error message?
-
please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!
With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal. -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?
You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
This may or may not correct your problem - call back if it doesn't.
Clinton -
My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup? -
I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance
I have the same problem with another TeamLava app, Fashion Story.
-
# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing! -
I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?
You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
How do I uninstall a program that is running in the background but does not show in Force Quit?
Open Activity Monitor and look for the program. Select it and Quit or Force quit it from within Acitiviy Monitor.
Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages. You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
OT -
My flash reads the xml, but does not understand the tag php....
my flash reads the xml, but does not understand the tag php. I want to read my xml dynamically, please help me.
code:
stop();
function randomOrder(targetArray)
var _loc2 = targetArray.length;
var _loc3 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc3[_loc1] = _loc1;
} // end of for
var _loc4 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc4[_loc1] = _loc3.splice(Math.floor(Math.random() * _loc3.length), 1);
} // end of for
var _loc5 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc5[_loc1] = targetArray[_loc4[_loc1]];
} // end of for
return (_loc5);
} // End of the function
var randomNUM = "?n=" + random(9999);
_root.lan = 1;
var homehead;
var homelink;
var homelinkwindow;
var homebg;
var homeflash;
var lamp = Array();
var promo = Array();
var promobottom = Array();
var headimg = Array();
f_xmlwork2 = new XML();
f_xmlwork2.ignoreWhite=true;
f_xmlwork2.load("banner.php");
f_xmlwork2.onLoad = function(sucess){
if (sucess){
trace ("XML loaded!");
f_xmlItemx2 = parseInt(this.firstChild.childNodes[0].firstChild);
f_totalx2 = f_xmlItemx2.length;
trace(f_totalx2);
var _loc12 =0;
// declarar a imagem de fundo
homebg = this.firstChild.childNodes[0].firstChild.nodeValue;
f_headimg = this.childNodes[1];
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2) {
juju = f_headimg.childNodes[_loc2];
jj = headimg.push({headimg: f_headimg.childNodes[_loc2].attributes.headimg, bgimg: f_headimg.childNodes[_loc2].attributes.bgimg, msgimg: f_headimg.childNodes[_loc2].attributes.msgimg, leftthrow: f_headimg.childNodes[_loc2].attributes.leftthrow, rightthrow: f_headimg.childNodes[_loc2].attributes.rightthrow});
//end for
allpromo = this.childNodes[2];
jjpromo = allpromo.childNodes;
for (var _loc2 = 0; _loc2 < allpromo.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promo.push({img: jjpromo[_loc2].attributes.img, title: jjpromo[_loc2].attributes.title, url: jjpromo[_loc2].attributes.url, window: jjpromo[_loc2].attributes.window, info: jjpromo[_loc2].childNodes[0].nodeValue});
// end of for
allpromobottom = this.childNodes[3];
jjpromobottom = allpromobottom.childNodes;
for (var _loc2 = 0; _loc2 < allpromobottom.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promobottom.push({url: jjpromobottom[_loc2].attributes.url, window: jjpromobottom[_loc2].attributes.window, info: jjpromobottom[_loc2].childNodes[0].nodeValue});
} // end of for
if (f_xmlwork2.loaded == true)
headimg = randomOrder(headimg);
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2)
trace (headimg[_loc2].headimg);
} // end of for
play ();
} // end if
trace(f_xmlwork2);
stop();
PHP code:
<?
$link= mysql_connect("localhost","rnpac_eco","123");
mysql_select_db("rnpac");
$dir="banner/";
$dir1="produtos/img_pro/";
$dir2="universo/actividades/";
$sql = 'SELECT tbl_produto.id_produto, tbl_produto.produto, tbl_produto.legenda, tbl_produto.detalhe, tbl_produto.preco, tbl_produto.produto_cat_id, tbl_detalhe_produto.proprietario, tbl_detalhe_produto.local, tbl_detalhe_produto.qualidade, tbl_detalhe_produto.alcool, tbl_detalhe_produto.acidez, tbl_detalhe_produto.ph, tbl_detalhe_produto.informacao, tbl_detalhe_produto.gestor, tbl_detalhe_produto.condicionamento, tbl_detalhe_produto.detalhe_t, tbl_detalhe_produto.interesse, tbl_detalhe_produto.transporte, tbl_detalhe_produto.produto_id, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1, tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6
FROM tbl_cat_produto, tbl_produto, tbl_detalhe_produto, tbl_imagem_produto WHERE tbl_produto.id_produto = tbl_detalhe_produto.produto_id AND tbl_produto.id_produto = tbl_imagem_produto.produto_id ORDER BY RAND()';
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row1=mysql_fetch_array($resultado);
$sql = "SELECT tbl_sub_universo.id_subuniverso, tbl_sub_universo.subuniverso, tbl_sub_universo.universo_id, tbl_actividade.id_actividade, tbl_actividade.entidade, tbl_actividade.legenda, tbl_actividade.subuniverso_id, tbl_actividade.det, tbl_actividade.preco, tbl_actividade.data, tbl_detalhe_actividade.actividade_id, tbl_detalhe_actividade.periodo, tbl_detalhe_actividade.descricao, tbl_detalhe_actividade.programa, tbl_detalhe_actividade.informacoes, tbl_detalhe_actividade.actividades, tbl_detalhe_actividade.localizacao, tbl_detalhe_actividade.locais, tbl_detalhe_actividade.servicos, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1,tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6, tbl_imagem_produto.actividade_id FROM tbl_sub_universo, tbl_actividade, tbl_detalhe_actividade, tbl_imagem_produto WHERE tbl_actividade.id_actividade =tbl_imagem_produto.actividade_id AND tbl_actividade.id_actividade =tbl_detalhe_actividade.actividade_id ORDER BY RAND()";
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row2=mysql_fetch_array($resultado);
$query='SELECT * FROM tbl_banner ORDER BY RAND()';
$resultado = mysql_query($query);
echo' <?xml version=\"1.0\"?>
<home_left_headline>
<bgimg>'.$dir2.''.$row1['imagem1'].'</bgimg>
</home_left_headline>
<home_flash>';
while($row = mysql_fetch_array($resultado)) {
echo'<swf headimg="" bgimg="" msgimg="" leftthrow="" rightthrow=""></swf>';
echo'</home_flash>';
echo'<promotop>
<promo img="" title="" url="" ><![CDATA[]]></promo>
<promo img="" title="" url="" ><![CDATA[]]></promo>
</promotop>';
mysql_close($link);i have two files banner.php, for testing my flash banner.
This one works:
-------------------------------| banner.php |---------------------------------------------
<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>
-------------------------------|end banner.php |---------------------------------------------
this other does not work:
-------------------------------| banner.php |---------------------------------------------
<?php
echo"<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>";
?>
-------------------------------|end banner.php |---------------------------------------------
Why? What is wrong? why does my flash does not understand the tag php
Message was edited by: armandix
Maybe you are looking for
-
Where are PDF files "printed" by Acrobat 8.3.1 in Mountain Lion?
I just got a new Mac Mini and transferred my old version of Acrobat Pro 8.3.1. I know that it will have some problems in Mountain Lion, but I only want to do a few simple things. When I try to print to PDF and select Adobe PDF 8.0 as the printer (t
-
Deprecation of JMS topic receival in post 7.0
Hi, In chapter 12 of the "Programming WebLogic Web Services" manual of WebLogic 7.0, I read: "Receiving Data from a JMS topic is deprecated in this version of WebLogic Server" Is this realy true (sinc
-
Time capsul on cabel net and wifi net
Can I connect Time capsul on the cabel net and wifi net at the same time. I have 2 PCs connected in cable net and macbook is conected via wifi. I have some problems with this, pls help. Thanks
-
I can't download the new firmware 1.0.3 to my iPod nano 3, when i try to download it says "Itunes could not contact the iPod software update server because you are not connected to the Internet" But I am connected to internet! I can purchase music an
-
HT201210 unable to restore 3gs, error code -1 comes up at end of firmware restore
I am trying to restore my Iphone 3gs, unfortunately when the restore reaches the end of firmware restore it seems to pause for a minute, i then get a message telling me that anunknown error has occured, error code (-1). i cant seem to find out what t