HFM and Database single server installation

Hi Everyone
I am trying to install HFM, FDM, HFR and database on single server (64bit 2008 R2 OS), I started with installation of 64 bit database(v11g Release2) which I have installed in my D drive rest everything remains at default path. Installation completes successfully, also I am able to login into the database through SQLPLUS.
Then I start my installation for clients which I am installing in c drive, installation of 32 bit client is successful and when I try to login through that client I am not able to login(TNS Protocol error).
Moving ahead with the installation of 64bit client, I am not able to install since it throws me an architecture error "Actual Value 32bit and Expected Value 64bit" if I install 64 bit first and then the 32 bit everything goes fine but I am only able to connect through 64 bit client and not with 32 bit.
Now I have few questions here..
1) Can I install database, HFM, FDM, HFR on single server (11gR2 and v_11.1.2.1) if yes what is the correct way???? Installing database first and then clients and then 11.1.2.1??? or what????
2) Why does it throw me an architecture error while it recommended to install 32 bit first and then 64 bit??????
3) If I install 64bit client first and then 32 bit I am able to make connectivity to database only from 64 bit so in that case after installing the suite I should run HFM atleast but I am only able to run it once the moment I take a restart of server everything goes down with "Apache bridge error" and then the 404 forbidden error.
If any one can guide me with proper steps for database installation and clients that would be great!!!!!
I am installing foundation services first then HFM followed by FDM and HFR.
Regards
Vikalp

The following blog post might help you:
http://blogs.technet.com/b/dpm/archive/2014/09/29/support-tip-dpm-2012-r2-ur3-agent-install-fails-with-error-0x80070643.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Similar Messages

  • SharePoint Server 2013 single server installation licenses and system requirements

    We are thinking of setting up a SharePoint Server 2013 for the following features to be accessed by our test team (<100 users)
    Our requirements are as follows - 
    Total user access <100 users(starts with 50 and may be go upto 100)
    Mainly Access to TeamSite(Document library), WiKi, BI reports view(SSRS Reports integration)
    We have a Visual Studio Ultimate license that covers SQL Server 2012 and Share Point server 2013.
    We have also got a Amazon EC2 machine access to create a Xlarge box with Microsoft recommended Cores, Memory, storage for SINGLE INSTALLATION of SharePoint Server 2013 and SQL server database on Windows Server 2012 
    My queries are as follows
    Are the licenses above sufficient to go ahead with setting up the SP Server? or do i need any other licenses ?
    I would like to create local LDAP in amazon without connecting to the company active directory. Would this be possible? We have users from other locations(different countries) providing services to our company and we would like them to access this portal
    to share and access docuemnts without any network issue etc..
    Are there any known firewall issues with EC2 machines for share point deployment
    System requirements for single server installation (with or without BI reports)
    Please note this implementation is only for internal use by the test team and is not critical. Not a production implementation. 
    Is there any better solution?
    Much appreciate your help 
    Thanks
    Vara

    MSDN subscription licenses for SharePoint aren't, as far as i know, for use as production devices. This means that whilst you can use it for testing and development you can't use that license for the SharePoint server that you'll all be using.
    As such I think you will need to buy a SharePoint 2013 server license. The same goes for SQL, Windows etc.
    There is also the question of user licenses, ie. CALs. I don't remember if those come included as part of an MSDN subscription.
    2) Possibly. As long as Amazon can host a domain for you it should be possible.
    3) Pass. Microsoft prefer you to use Azure and most of my training and experience is with that.
    4) High. 4 cores, 24GB of RAM minimum.
    http://technet.microsoft.com/en-us/library/cc262485.aspx#hwforwebserver
    You'll either need a 2XLarge or a memory orientated box, in which case you won't have much storage space.
    Internal team infrastructure is still important. If you're using it enough to make it worth having then you need it there and running.
    Have you considered using Office 365?

  • ZENworks Single Server installation error

    Hi.
    I have a problem during the single server installation.
    Let me tell you server status.
    Server OS: MS Window server 2003 Enterprise
    SQL: MS-SQL 2005 Enterprise edition.
    with IIS and Active Directory.
    Error message show like this
    "Couldn't replace ~DSDATAFOLDER~ with "E:\Program Files\Microsoft SQL
    Server\MSSQL.1\MSSQL\DATA" in file Scripts\SQL_PSTOKEN.sql(error code -2)
    Would you let me know if you know how to figure out this?

    Originally Posted by lanoxox
    I have changed the installation procedure that was "distributed setup" in the CD.
    There was error during the "Policy Distribution Service". the message is
    "The Database STDSDB exists,but the password you entered for user account "DS_STDSDB_USER" is incorrect ,Try another passwor?"
    I could not go forward after this. and there was no account for "DS_STDSDB_USER"
    in the SQL Server. I think it could not create this account.
    Hi, how did you solve this? the TID doesn't solve this error.
    Regards.

  • Split Single Server Installation into two servers...

    Hello everyone,
    We are using OCS 10.1.2.3, SO Linux RHEL 3. We have the infra and apps in a single box installation. All in one and we are using all Collaboration Suite services except Wireless.
    We are having a huge performance problem in there. After we start to use Content Services, our Infra Database is growing 10 Gb per month and the app tier is consuming all RAM memory from the server.
    So, we are trying to separate the Infra tier from the App tier, in two servers, but we can't find anything, any docs, any articles, any metalink notes, nothing at all!
    So, my question is:
    * Anyone has been through the same situation?
    * Is actually possible to separate the tiers after one year running both tiers on the same server?
    Thanks in advance,
    Paulo.

    We have moved our database to new hardware - so I know that portion is possible. We had the two databases for our ocs install in the same RAC environment. We had 3 sets of servers for our install 2 OCS App nodes, 2 IdM nodes, and 2-node RAC DB (holding 2 databases). We moved the IdM databases to a new RAC environment to allow IdM nodes to be up when we need to perform maintenance on OCS App/RAC nodes.
    Moving the database required only an update of TNS and OID information that pointed which hosts held the database.

  • Oract Tutor 14 Author server installation and Publisher Client-Server installation

    hi all,
    does any one know about the installation of Tutor Author 14 server version and how to setup Publisher Client-Server architecture??
    please share any document or link that can guide with this..
    thanks and regards,
    SD

    Hi,
    are you on itanium or x86? Your log says, "inux_ia32_jrockit_160_14_R27.6.5-32_jdk.zip not found" that means you should have itanium.
    Regards

  • SharePoint Single Server Installation

    Hi,
    We have question related to SharePoint 2010 SingleServer re-installation.
    We want to confirm whether we need to format the OS before re-installing the SharePoint 2010.
    Does the un-install will completely remove the SharePoint (including Registry entry)?
    Thanks in advance.
    Regards, - Swati

    We want to confirm whether we need to format the OS before re-installing the SharePoint 2010.
    Inder : You can surely re install sharepoint 2010 on same box.
    Does the un-install will completely remove the SharePoint (including Registry entry)?
    Inder: I have seen that some registry files still exist on the server but they get overwritten when we re install the software
    If this helped you resolve your issue, please mark it Answered

  • Maximum no of users supported by OCS 10.1.2 in a single box installation ?

    Hi OCS experts,
    What is the maximum number of users supported by OCS 10.1.2 in a single box installation for a 6 way Intel box or a 12way AIX box.???
    I mean if the server hardware (processor, memory, and storage are huge enough)...
    Are there any limits by the software side of OCS ???
    I am planning to deploy OCS for about 15,000 users on Redhat Linux AS 4. We also have the option to deploy it on AIX if required.
    Many thanks,
    maas.

    Many thanks. But as OCS 10.1.2 documentation indicates upto 1,000 users for single server installation. So I wanted to know if there is any practical limit by the OCS software itself on the number of users in single server deployment on Linux.
    Like for instance IBM indicates that domino 7 can now go upto 12,000 users in a single box.
    Is there any similar recommendation from Oracle to ease in capacity planning decisions for Architects and Implementers.???
    I understand that it would be a very difficult prediction keeping in mind the huge functionality of OCS. So let me narrow the scope of our deployment, In the beginning we would using OCS mostly for Email (15,000 users) and about 2000 of these users would also be using calendering. 4,000 Email users use POP clients to check emails frequently. Remaining users use Webmail to check emails upto 2 or 3 times a day.
    Now, if you experts advice that a six way IBM eServer X445 server with 16GB RAM and sufficient SAN storage would be able to take this load then I can go ahead with it. Do I have to take any specific measure in design and deployement to leave room for adding nodes.
    Many thanks,
    maas

  • Multiple queues- single server

    I've 5 queues and a single server that needs to order all the rows of queues (by unique ID).
    I can have IDs that not already arrive at queues. I need to wait for them.
    What algorithm can I use to solve this problem?
    I think that is the same problem of Oracle recovery using archive log files. We have lot of files
    (with random SCNs) and we need to apply them to database.
    Thanks a lot
    André

    If i correctly understand it can be possible pseudocode as i described below:
    start with lowest ID
    do infinitely
    --for each queue
    --**search ID from queue
    **if found then
    ****process ID
    ****increment ID by one
    Reg.

  • Installation of EBS 12.1 and Database on the same server

    Hi,
    Due to resource crunch, I would like to do new installation of EBS 12.1 and Database on the same server where already EBS 12.1 and Database installed.
    I have one server where EBS 12.1 and Database installed (Single node installation).
    Now I want to create another environment for other purpose (another test env.). But I don't have another server .
    So Can I start new installation of EBS 12.1 and database on the same server ?
    I have enough space and memory on server.
    Are the installtion conflict with each other ? any implications happen on the first environment ?
    I want my first environment run fine without any prob., after installing EBS and DB on the same server.
    Please guide me.
    Regards,
    Sanjay Patel

    So Can I start new installation of EBS 12.1 and database on the same server ?
    I have enough space and memory on server.Yes you can as long as you have sufficient resources.
    Are the installtion conflict with each other ? any implications happen on the first environment ? If you install in different ORACLE_HOMEs you should be OK.
    Thanks,
    Hussein

  • SQl Server Installation failing for Database Engine and Its Services

    Hi,
    I was trying to install SQL SERVER 2008 R2 on VM having 500 GB hard disk and 16 GB RAM.
    OS is Windows Server 2008
    But it fails for Database Engine.
    Installation Details are as Below.
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Exit code (Decimal):           -2068119551
      Exit facility code:            1211
      Exit error code:               1
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Start time:                    2014-10-13 18:41:01
      End time:                      2014-10-13 19:26:32
      Requested action:              Install
      Log with failure:              C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354Detail.txt
      Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x476BF04A%400xBB814387
    Machine Properties:
      Machine name:                  KVS-IN-WFAN092
      Machine processor count:       4
      OS version:                    Windows Server 2008 R2
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         di-softwareSoftwaresSQLSQL_2008_R2_Enterprisex64setup
      Installation edition:          ENTERPRISE
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITYNETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Automatic
      CONFIGURATIONFILE:             C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    False
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE,REPLICATION,FULLTEXT,SSMS,ADV_SSMS
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  NT AUTHORITYLOCAL SERVICE
      FTSVCPASSWORD:                 *****
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:Program FilesMicrosoft SQL Server
      INSTALLSHAREDWOWDIR:           C:Program Files (x86)Microsoft SQL Server
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:Program FilesMicrosoft SQL Server
      INSTANCEID:                    SQLServer
      INSTANCENAME:                  SQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITYNetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITYNETWORK SERVICE
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           KRONOSENGsuperuser
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  False
      TCPENABLED:                    1
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Full-Text Search
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Management Tools - Complete
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354SystemConfigurationCheck_Report.htm
    And Error in log file are maily as below.
    2014-10-13 19:26:27 Slp: Completed Action: SqlBrowserConfigAction_install_Startup_Cpu32, returned True
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11
    dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "SqlBrowserConfigEngAction_install_Startup_Cpu64" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlBrowserConfigEngAction_install_Startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
    for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "SqlEngineConfigAction_install_startup_Cpu64" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlEngineConfigAction_install_startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
    for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant
    features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "AgentInstall_AgentInstallStartup_Cpu64" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: AgentInstall_AgentInstallStartup_Cpu64 The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant features. The feature is tested for results:
    ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64. There
    are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature
    is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "FulltextConfigAction_install_startup_Cpu64" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: FulltextConfigAction_install_startup_Cpu64 The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature is tested for results:
    ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There
    are 11 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are
    2 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64.
    There are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
    2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features.
    The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
    2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
    2014-10-13 19:26:27 Slp: Completed Action: PostMsiTimingConfigAction, returned True
    2014-10-13 19:26:27 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
    2014-10-13 19:26:27 Slp: ----------------------------------------------------------------------
    2014-10-13 19:26:27 Slp: Running Action: ExecuteExtendedTimingsWorkflow
    Thanks,
    Mahesh

    I have uploaded detail.txt at below url.
    http://m.uploadedit.com/b041/1413264342685.txt
    Hi Mahesh,
    According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
    setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
    However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
    to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
    For more details about this error, please review the following similar thread.
    http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
    Thanks,
    Lydia Zhang

  • Multiple oracle database on single server

    Hi,
    In our organization, we are going to install, SRM, BW and XI on a single server, each going to use its own database.
    So, in that case, will the listener and listener port for all the three database will be the same, or we need to define it during the installation.
    Please help me in this regard.
    Thanks and Regards,
    Sailesh K

    Hi Sailesh,
    The best option is different binaries (Oracle & Sap), different Filesystems and different ports (Listener, msserver, gw, and so on) for every system you install. And, of course, different system numbers!
    Best Regards,
    JC Llanes.

  • Win32 Oracle 10g Database Server Installation problems

    Hello,
    I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
    o OracleDBConsoleORCL [started]
    o OracleOraDb10g_home1iSQL*Plus [started]
    o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
    o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
    o OracleOraDb10g_home1TNSListener [started]
    o OracleServiceORCL [started]
    I have created the following files:
    # LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = d:\oracle10gServer)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = d:\oracle10gServer)
    (SID_NAME = ORCL)
    # TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL)
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    I go to the DOS console and type:
    c:> sqlplus scott/tiger@ORCL
    and I get:
    ERROR: ORA-28000: the account is locked
    I did this right after I restarted my computer.
    When I use the Enterprise Manager at:
    http://localhost:5500/em/
    I get for ORCL:
    Status: Status Pending
    Status Pending Since: Unavailable
    Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
    Current Status: open
    This is the correct current database status, although it doesnot match the current status in the sitemap page
    What does this mean? Do you think this may contain the clue to the answer to this problem?
    When I restart the Database I get the same status: unavailable.
    I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
    gkk

    I can help you with the SCOTT account being locked. Try:
    sqlplus /nolog
    connect / as sysdba
    alter user scott identified by tiger account unlock;

  • Multiple database in single server

    Hi experts,
    Please tell me how to configure multiple SID with single listener.
    I configured the DR setup of two databases in single server. Now the problem is, if I start one listener from orapm1(CRM), my data is replicating only for CRM, and if I am going to start my listener from oraPE2 user (DBM), error is coming u201C listener is already startu201D but DBM is not replicating with DR site.
    And when I stop the listener from oraPM1, and start listener from user oraPE2(DBM), my DBM is replicating properly, I want to start both in parallel with one listener.
    Right now I have only one port for both database (1527) and only one LISTENER, should I need to change the port for one server e.g DBM (primary and standby), and then change in listener files. For both side (primary and standby)
    If I am correct please let me know the steps, what precautions we need to take.
    And what change I need to do in listener file.
    2nd) Can I work on same port for both SIDs, if yes please tell me the steps.
    My CRM is working properly so I need to change in DBM part.
    I am attaching listener file from both users in same server (10.11.230.12)
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER_PE2 =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = PE2.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = PE2)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = 10.11.230.12)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PE2)
    (ORACLE_HOME = /oracle/PE2/102_64)
    pm1 listener file
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = PM1.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = PM1)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = 10.11.230.12)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PM1)
    (ORACLE_HOME = /oracle/PM1/102_64)
    Thanks in advance.

    Dear Experts,
    please tell me is it ok or i need to change something else?
    this example is for only one listener, and i put both SID details in same LISTENER, or i need to change the listener name for another server. it is very confusing...
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = PM1.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PM1)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = 10.11.230.12)
              (PORT = 1527))
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY =PE2.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PE2)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = 10.11.230.12)
              (PORT = 1528))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PM1)
          (ORACLE_HOME = /oracle/PM1/102_64)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = ON
    SID_LIST_LISTENER  =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PE2)
          (ORACLE_HOME = /oracle/PE2/102_64)
    Rishi

  • Oracle 11g Server Installation and Configuration

    Hi All..
    I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
    This is for a server and we might even need to replicate the entire DB.
    Can any on please help me out in this .
    Thank you

    Hi,
    Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
    Regards,
    Hussein

  • SQL SERVER INSTALLATION FAILS AND I TRIED SO MANY TIMES TO INSTALL AFTER UNSINSTALLATION , BUT IT SEEMS WORTHLESS.KINDLY SUGGEST ME .

    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2147467259
      Start time:                    2015-02-16 10:35:41
      End time:                      2015-02-16 11:15:03
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SSMS:            Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for BIDS:            Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for RS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  ABHI
      Machine processor count:       4
      OS version:                    Future Windows Version
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         f:\33ee254b43729031825c982f\x64\setup\
      Installation edition:          Express
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      true
      AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Disabled
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    true
      ENU:                           true
      ERRORREPORTING:                true
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, RS, BIDS, BOL, SSMS, SNAC_SDK, LOCALDB
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITY\Network Service
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          AllFeatures_WithDefaults
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  NT Service\ReportServer
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           ABHI\abhi24
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  true
      TCPENABLED:                    0
      UIMODE:                        AutoAdvance
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150216_102728\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Common Files
      Component error code:          0x84BB0001
      Error description:             The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
    failure of the WMI server to start.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
      Feature:                       SQL Server Data Tools
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Common Files
      Component error code:          0x84BB0001
      Error description:             The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
    failure of the WMI server to start.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Common Files
      Component error code:          0x84BB0001
      Error description:             The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the
    failure of the WMI server to start.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xA60E3551%400xD3BEBD98%401211%401&EvtType=0xA60E3551%400xD3BEBD98%401211%401
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The system cannot find the path specified
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The system cannot find the path specified
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The system cannot find the path specified
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xF57C3D6F%400xDC80C325&EvtType=0xF57C3D6F%400xDC80C325
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       Documentation Components
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       LocalDB
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150216_102728\SystemConfigurationCheck_Report.htm

    Hi,
    It seems to me like you have
    1. Previous failed instance of SQL Server installation which subsequently caused further SQL Server installations to fail
    2. The windows account with which you logged into machine to install SQL Server is corrupt
    You can, If possible create a new windows account give it admin privileges and then log into machine using this account
    After you login follow below method to remove failed SQL Server installation
    Uninstall
    Uninstall SQL Server completely from add remove program. Make sure no previous failed installation fragments are present on your system. Please use this
    link for uninstalling existing instance of SQL Server
    . If you have SQL Server 2005
    use this link .
    If you are unable to uninstall SQL Server completely because you deleted SQL Server files and un-installation is giving error please follow below method. This method is tested and suggested on
    this thread and 
    Forum .
    Below Solution (about removing reg keys) will work correctly for SQL Server having Just one instance.
    If you have multiple instances and you have messed up SQL Server installation please contact Microsoft Support personal to get better guidance on removal of SQL Server. Please DONT use this method if you are new to SQL Server take help of experienced
    DBA to locate proper registry keys and remove them if you are not confident at all it would be better calling Microsoft Support.
    Note: Removing necessary registry entries might cause SQL Server instance to crash so backup registry before doing changes.
    1. Uninstall the existing SQL Server  and all the components from the add remove program.
    2.
    Backup the registry .
    3. Delete the following keys using regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer.
    7. Reboot the machine.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

Maybe you are looking for