HFR login in error

Hi All,
I'm using HFR 9.3.1V, I'm able to login to FR studio using admin ID, but while draging a Grid in to report to create a new report it si giving some error:
Error: DatasourceIDLogin.LoadDatasourceNames Error: -2147467259 Error Loading DatasourceList to Repository
can any one let me know why im getting such error
its really urgent.
Regards
SVK

Hi,
You should use OID username.
for eg, if your domain name is mydomain and username is xxx.
then c_user should be xxx not [email protected]
and also better avoid . (dot) and other special characters when you create
user name.
eg
mail_session.login('xxx', c_password, c_ldaphost, session_id, c_ldapport);
Make sure that you have created OID and mail user account for this user.
Bala.

Similar Messages

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

After creating a contained database, getting a login failure error while trying to connect to it.

After creating a contained database and a user with passowrd under the same database, I tried connecting to the contained database. I entered the server name, login credentials and went to the connection properties tab to select the contained database using
<browse server> option under "connect to database". Here I get the login failure error.
TITLE: Browse Server for Database
Failed to connect to server <servername>\<login>. (Microsoft.SqlServer.ConnectionInfo)
But when I manually enter the Database name instead of selecting from the <browse server> option the connection gets through.
Is this a Bug ? Has anyone else faced this error?

Hello,
Is this a Bug ? Has anyone else faced this error?
It's not a bug, it's working as intended. Contained users don't have instance level permissions and cannot "login" to the instance (which is what the "browse" button is attempting). In order for it to work, the database name must be in the connection string
(which with the browse button, it will not be).
Welcome to contained users, they aren't for everyone.
Sean Gallardy | Blog | Microsoft Certified Master

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Swing : login with error checking

Hi all,
I am trying to write a login with error checking on the password. If password validation fail. It will remain there. If it passes it will go to the application. any samples and sites please.
thanks
andrew

CardLayout would be good for this sort of thing - allows you to lay panels on top of one another and then switch the display accordingly.
Thus, when your app starts up you show the login screen and then once a user successfully logs on you switch to the main application screen.
I put a basic example on another thread earlier:
http://forum.java.sun.com/thread.jsp?thread=341205&forum=421&message=1404092

Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux

Hi All,
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Thanks in advance.

set hostnme correctly

Terminal login:PAM error: Critical error-immediate abort

I have previously posted this question under Tiger Forum, but have since discovered this Unix forum.
I do not have any understanding of Unix, but as described below have been forced to use Terminal due to a Printer Setup Utility error.
This is a copy of my original question:
Printer Setup Utility recently wiped of my selected printer (HP 2710) & when I attempt to add it again gives the error "server-error-service-unavailable."
Under Terminal Help there is a solution for this problem
(also @ http://docs.info.apple.com/article.html?artnum=107054),
however when I open terminal the follow error appears, "login:PAM error: Critical error-immediate abort."
I have no idea what this means or how I could fix it (& then hopefully my printer setup utility).
Thanks for any suggestions

Hi Justin,
Where it's located (or should be) is in the directory 'pam.d' which is in the directory 'etc' on the boot drive '/'
Thus the path: /etc/pam.d/
The file is called 'login'
To see from the Finder:
Because the /etc directory is invisible in the Finder use 'Go to Folder…' from the 'Go' menu (commandshiftG) and type in the path to the directory, i.e. /etc/pam.d/
This will open the directory if it's there. The 'login' file will probably open in TextEdit for viewing.
To see from the Terminal:
Either cd (change directory) and list...
<pre>cd /etc/pam.d
ls</pre>
or just list without changing your working directory...
<pre>ls /etc/pam.d/</pre>
View the file in question with cat (concatenate and print)...
<pre>cat /etc/pam.d/login</pre>
or if you've changed your working directory, just...
<pre>cat login</pre>

Login: PAM Error (line 313): Critical error - immediate abort?

Hi there,
so I'm having problem with my MacBook Air. Since a few days it is taking realllly long to start up.
And it asks my password (even I didn't require that).
When I checked my Terminal it said: login: PAM Error (line 313): Critical error - immediate abort
what can I do? can someone help me?
Thanks!

Post Unix/Terminal queries in the Unix forum under OS X Technologies.

Login Failed error while creating a CR using Universe

Hi,
We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
For ex universe name is : xyz
Now i want to use this universe in crystal reports, we are using CR2008.
I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
After this when we click Ok it is giving an error message saying that Login Failed
We are unable to get the solution for this anybody please guide us to solve this.
Regards,
Pradeep.B

Have you checked out this article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
It has a section on troubleshooting Universe connections.

ERROR – SQL Server Login Failed, Error 11001

We have an application that uses MSDE as its ‘Back-end’.
It has been working fine for years. We have however had to recently re-build the Operating System on our own Server that it was running on.
Original O/S Environment
We used Windows Server 2008 r2, using
Hyper-V to run Windows Server 2003 so that we can use
MSDE to run our application.
We do not want to change to later versions of SQL Server Express as they no-longer support Replication.
NEW O/S Environment
When we re-built the Server we went for Windows Server 2008 r2, using
Hyper-V to run Windows 7 Enterprise so that we can use
MSDE to run our application.
We have used this setup many times before and know that MSDE runs quite happily under Windows 7.
Servers have been renamed
The real Windows Server 2008 r2 machine used to be called FILESERVER.
It is now called FILE-SERVER.
The virtual machine running our application was originally called GEMSERVER.
It is now called GEM-SERVER.
What’s happening on the Server
The application is running fine. We can access the underlying MDSE Database with SQL Server 2005 Management Studio Express without problem.
We can build a test ODBC Data Source and connect to the ‘SQL Server’ Database, again without problems.
What’s happening on the Client PC
The application does not connect. I get:
     An error occurred while connecting.
     [DBNETLIB]ConnectionOpen (Connect())SQL Server does not exist
     or access denied.
When I build a ODBC Data Source to test the Connection I get:
Microsoft SQL Server Login
Connection failed:
     SQLState: '01000'
     SQL Server Error: 11001
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
     (Connect()).
     Connection failed:
     SQLState: '08001'
     SQL Server Error: 6
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL
     server not found
I can Ping GEM-SERVER from the Client PC without problems.
I have disabled Firewalls an Anti-Virus Software on both the GEM-SERVER and the Client PC – to no avail.
I’ve tried connecting with:
Named Pipes,
TCP/IP,
IP Address of GEM-SERVER – 192.168.16.122,
Using Specific Port 1433 in connection.
NONE of it worked. L
ANYBODY any ideas what to try next?

Here's the solution that we came up with to our own problem:
This problem was actually caused by a bug in our own Application.
For some reason when we restored our MDSE Database the correct SQL Server Access Protocols were not setup correctly. (It is designed to handle these setup issues for us and has done so previously.)
We still have to determine why it happened and rectify the problem within our Software.
However to correct the problem with our own 'Server' we had to manually:
Run netsvrcn.exe using command prompt as an Administrator on the ‘Server’ running the MSDE Database,
Enable TCP and NAMED PIPES protocol
Restart SQL Server instance
Exclude the ports SQL Server normally listens on, from the firewall using ‘Windows Firewall Advanced Security’ for both in-bound and out-bound rules:
1433 TCP port
1434 UDP port
We then tested the ODBC connection from client machine and found that it worked fine, as indeed did our application.
However we still have a residual problem.
For we cannot connect to our Server called GEM-SERVER using GEM-SERVER\GEMSQLSRVR we have had to use 192.168.16.122\GEMSQLSRVR.
We are not sure why. We obviously wish to use the machine’s name rather than its IP Address, as its IP Address is dynamically assigned by a DHCP server so may change in future.
Do I need to raise this remaining problem as a separate issue?

SSO Login page Error : Unexpected errors (WWC-41400)

Hi,
I downloaded the zip file ssosdk.zip from download section of OTN for SSO and followed the steps in the Install document. All the process went through without any error. But when i tried to access my login URL, i am getting this error :Unexpected errors (WWC-41400)
.Even if i try to login using my ORCLADMIN username and its password i am getting the same error and remains in the same page.
while configuring the partner application i did not encounter any error. Kindly suggest me how to proceed further.
Vijay

This also happened to me after I run ssodatan to change the logon_url port.
Can anyone provide some help with this?!

SSO Login Page Error

Can anyone solve this issue??
We are developing ASP.Net application with oracle 10g Application server for single sign-on.
we need to map the IIS URL(eg /private/*), redirecting to Oracle Application server,authenticate it and get the result back
to IIS.
As of Oracle Document we installed and configured proxy plugin and SSO plugin in IIS,and registered a partner application
using ossoreg.jar command and it was successfully redirecting to the Single Sign-on login page
but the problem is, after I click Login button it gives "page not found" error
and the URL read as "http://<host.domain>:<port>//sso/auth"
A normal login through SSO doesnt give any error...
Do we need to change some config in policy.properties configuration file??
Please reply, if anyone identified the problem.
Regards
Guhan

Hi,
I have triued the same thing here ... linking to a protected url on an IIS server. Initially I had similar problems. Check your plugin.conf file and make sure your login server file is defined correctly ... no " and use the Windows path conventions.
Also, I thought I had directed the config file (osso.conf) to be in the directory i had created but it showed up in oracle_home/apache/apache/conf/osso. You may need to move it.

Login Credentials Error "Your PC is offline." with Microsoft Account

i use windows 8.1 whenever i try to sign into my laptop this error shows up " your pc is offline. Please sign in with the last password used on this P C. " I recently switched from my local account to microsoft account. my passwords for local
and microsoft account are different I tried entering both the passwords but it still shows the same error.

i just want to add 2 more
try to disable your WIFI and try to connect using your local account or Microsoft Account
You can also try your Microsoft account login at another online PC to make sure there is no issue with Account or internet connection
Refresh PC will be last option
Yes, I suspect you used the wrong password

Login failed error while importing an adaptive RFC model

Hi there,
I am trying to import a adaptive RFC model for a BAPI from a 46D system, to which I have connected using VPN from my WAS J2EE server. I have given the login details as Single server(Not load balancing), and given the user login details. However, I am not able to proceed further because it gives me the error 'Name or password is incorrect, please re-enter'. This is strange because I am giving the correct name and password, and I am able to login to this system through SAP GUI using same logon credentials.
I am confused as to what it is expecting to move forward. I have tried changing case of the user name, restarting my WAS etc. The client is correct, and the login language is EN.
Could anybody have any clues or have you faced a similar problem?
thanks in advance,
LM

I have had the same problem.
I think whoever programmed the logon routine at that point should be fired immediately and banned from programming for life! Logging on is a very basic and well-understood task, and programmed gozillions of times since 1940s. Common sense and unwritten rules of programming dictate simply if you make something case-sensitive, then you should accept an input in its original form (i.e. password in smalls, or whatever) but not change it to uppercase and then work case-sensitively. Either this, or you program everything case-insensitively.
Fire that programmer or give him to us gollumvoice

HFR Issues - "5200: Error executing query: Invalid Item ID"

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

This was due to an invalid default Point of View for the user that was incompatible with the particular report.
Change the Preferences to User Point of View Preview and run the report again.
File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
Re-run the report and select the desired POV.
This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
You can turn off later. Let me know if it fixed this issue.

HFR login in error

Similar Messages

Maybe you are looking for