HGST TOURO MOBILE PRO BLACK 1TB EME

Any experience with this, Seems good - I want to use it for editing in fcpx. USB 3.0, 7200 RPM, should do it, I guess,
https://www.deal.no/deal/default.asp?page=vare&ProdusentID=0S03560&ref=Prisjakt. no&utm_source=Prisjakt.no&utm_medium=cpc&utm_campaign=0S03560
S

ok so youre not booting from the bay caddy HD
yes your info is indicative most certainly of a bad sata connector
ive got 5 HD caddies 10 feet from me they all went toes up dead with hours of each other due to 5cent junk SATA connectors
sorry. but 3rd party HD devices can be great. but they flop due to using Incredibly junky sata connector circuitry
6 out of 10 complaints of dead external HD are in fact wrong. the HD are ok. its their junk sata connectors sadly

Similar Messages

Hitachi Touro Mobile Pro USB Harddrive in Windows 8

Did some one solved the Problem with the Hitachi Touro Mobile Pro USB Harddrive in Windows 8 ?
This drive is compartible with Windows 8 and get installed fine but in Windows 8 when you plug it in it gets installed as SCSI drive. I am sure it should be installed as IDE drive. The result is you cant use the drive right, like slow reading of a file up
to no reading at all. And this harddrive is relativly new so Windows 8 should be aible to do the job.
I wrote to Hitachi Support and they told me Microsoft 8 is the problem and Microsoft told me Hitachi is the problem....
The solution would be to re do the driver for USB 2.0 and USB 3.o so it can detect all USB devices correct and install the right driver.
I did install Windows 8 now 3 times and this problem occours for me still. So I will have to wait until this is solved , becourse I am not will to buy a new harddrive

Yes the Drive is compatible with windows 8 and windows 8.1, but it does not open any files on the hard drive so useless...I talked with Hitachi and the have send the correct driver to microsoft, but it is up to them when they get integrated.This drive works
just fine in Windows 7 Pro. I tried to use the drive in different Laptops with windows 8.1 and still the same problem. So clearly it is not a Problem on my Laptop !
Windows 8 installs the scsi driver not ide driver
And it is very disapointing for me that microsoft has still not solved this Problem. I spend alot of money on my Laptop and windows 8 + my harddrive . I will not buy a new harddrive becourse Microsoft is not willing to solve it for me......
With other words for me was the step to buy Windows 8 a bad idea. When I am aible to use my harddrive I will install it again..but until I get a clear statement that it is fixed I stop waisting my time with install windows 8 and going back to windows 7...Both
company make alot of money on user like me and that is what we get......

HT1338 Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Lion upgrade I get message that hardware is not supported. But X Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?

Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Mountain Lion upgrade I get message that hardware is not supported. But X Mountain Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?
<Edited by Host>

See babowa Post Here... on Compatibility...
https://discussions.apple.com/thread/4136749?tstart=0

Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

If you are speaking of the USB 3.0 Canvio, you are not alone. Call Toshiba and check on their progress in alleviating the problem. I heard they are blaming Apple, but since theirs is the only drive that exhibits this problem, I think the burden is on Toshiba.
Some users have reported that by using a micro USB 2.0 connector (see bottom picture), instead of the 3.0 that comes with the drive, that it is a workaround. Notice that the 3.0 connector has sort of a "dual head" nature to the construction. One part of it is 2.0 USB micro compatible. I've never tried it myself though.
Read ths thread for a discussion on the subject.
https://discussions.apple.com/thread/3510032?tstart=0

HT1446 My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

Crestron Mobile Pro G App on iPad 1

Hello I have an multiple IPAD 1s and 2s in my household. One of each IPADs struggles with the Crstron Mobile Pro G App. A pop up screen "Warning Wifi was powered off while the device was in Auto-Lock (Sleep) Press connect to reconnect. BUT it happens continually in the middle of changing channels. I've already deleted the app and reloaded in hopes this might rectify the situation but it does not. The other IPADs in the household do not do this. Can't figure out what is the deal. Does anyone have knowledge of this? I would greatly appreciate it. Thank you. Tami Stewart
And just now updated to new OS on the IPAD so maybe I should try that before I complain??

Hi,
Have you solved the problem?
I've it too.
Please let me know.

Mack Book Pro black out

I have a Mac Book pro. Purchased in UK. Have had intermittent problems - auto reports sent back to Apple. Gone on for 2 years. Now packed in completely.
Authorised dealer now wants £600 odd to fix - not happy - I should have been fixed when under warranty...
But every time I was about to take my Mac in to be fixed (being without your Mac for a week is like having your arms chopped off) it would fix it self.
I 'm trying to contact someone at Apple to say their fees to fix are unrealistic...and can they help.
No contact email address. Hours to wait on phone. And no Genius appointments - unless I travel 2 hours!
Logic Board - £409.50
Battery - £174.74
Labour - £60
Total = £644.24
Can you help? Where do I direct my concerns??
Have purchased over 25 Mac's for my businesses over the years plus all my family use Apple products. Never any issues.
But this Mac Book Pro has had issues!!
Thanks
Peter

Here are some things you can try. Do you have a newer operating system? http://reinout.vanrees.org/weblog/2015/01/06/macbook-pro-black-screen.html If you can use the CommandR or Option R to go to recovery. You can use the disk utilities to check and repair the drive and permissions.

My screen on my MacBook Pro blacks out constantly. If I press on the bottom left side of the MacBook, I can keep the screen on. I have been placing a small note pad to keep pressure on the bottom in order to keep the screen lit up.

My screen on my MacBook Pro blacks out constantly. If I press on the bottom left side of the MacBook, I can keep the screen on. I have been placing a small note pad to keep pressure on the bottom in order to keep the screen lit up.

You should try taking the battery out and putting it back in, but then if that doesn't work, you should take it into your Apple Retail Store and have a genius at the Genius Bar take a look. That seems like a hardware problem to me.

Yoga 2 Pro - Black screen when on tablet mode

Hi,
2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
My bios is updated and I have Windows 8.1.
Any suggestion???

I found the answer to my problem at
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated?

Macbook Pro Black Screen (Yosemite 15" 2014)

Hey guys, I was just sitting down and opened up Skype and my macbook pro suddenly went black, just previously I had been watching stuff for a few hours on my macbook hooked up to my TV via HDMI cable. I thought to simply restart, I heard the sound chime but the screen remained black, I hooked my macbook back to the tv and everything shows up and works perfectly on the TV, i can adjust the backlit keyboard lighting, but as its through HDMI sound/brightness adjustment couldn't be done, without HDMI attempting this changes nothing, I have reset the PRAM & tried to enter safe mode which didnt seem to go into safe mode, instead staying as a black screen, i have now force shut down my laptop about 20 times with nothing working on the screen, the whole screen is black, no cursor or graphics visible, shining a light in the screen shows nothing, the apple logo behind is not lit. I have researched literally every available article on this matter that I could find but most relate somehow close to mine but with different issues such as cursor showing or external monitor not showing display, I am convinced this is something related to me pulling out the hdmi or confusing it somehow, this laptop is literally like 2 months old and I cant see how there could possibly be a hardware issue.
Thanks all for reading hope someone has an idea I haven't tried!
Specs:
Year: 2014
GPU: Intel Iris Pro
Memory: 16GB RAM
OS: Yosemite
Symptoms:
Black Screen
No Display on Macbook
Keyboard and Keyboard lighting working
External Monitor fully working through HDMI
Sound Chime and booting correctly

Just encountered this problem this morning. Here's the fix: (Relayed from another forum)
1. Shut the computer down by holding the pwr button down for 10 sec.
2. Restart the computer with a short push on the pwr button and press the shift key down at the same time until you see the progress bar start moving.
3. Once you reach the point when your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password and hit Enter.
4. After a moment you should see the spinning ball.
Apparently this is an issue with an uncompleted update, but instead of asking you for your details to complete the update the screen goes black, but the computer is still able to receive your inputs.

13" MacBook Pro - Black flicker in Windows 7 x86 (BootCamp)

Hello everybody,
I just bought a new MacBook Pro 13" (late 2011 model). Because I study mechanical engineering, I had to install Win 7 x86 for using some of the programs we need.
What I noticed is that I get ocasional black flickering on the screen, for instance when I want to enter a web adrees in mozilla or when I resize a window. The flicker stays there and it doesn't go away untlil I resize the window again or go through all the options shown in the suggestion menu. Recently the Intel display driver also crashed.
Does anyone know what that could be? It's really annoying, I'm starting to regret I bought an apple product...
Cheers,
L

Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
Csound1 wrote:
lokiman wrote:
I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
You too have a black screen in Windows 7. ?

Yoga 2 Pro Black Screen

My Yoga 2 Pro is black screening on start up. Running Windows 8.1. On startup, the keyboard lights up, switches off and nothing on the screen - not even the Lenovo logo. Have tried one key recovery, still nothing. Also tried an external monitor and nothing on that either. Strange thing is that this first happened yesterday, and after a few restarts it suddenly started working. Put my machine to sleep, then this morning, same problem! Please, please help if you can - my only machine and need it for work - I'll be in a bad way if I have to send it in for repair.

The problem in this thread sounds almost exactly the same:
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/New-Yoga-2-Pro-Impossible-to-turn-screen-...
Obviously with this Comodo software, but the symptoms are similar.
I think I will try their recommendations before sending it for repair, as its probably exactly the same thing that Lenovo will do.
I also can't believe that this is a serious recurring issue otherwise EVERYONE would be returning their Yoga 2 Pros.
The fact that the screen switched off from inactivity then never turned on leads me to believe its a software problem, not hardware. At least I hope so.
Al

Mac Mini / Boot Camp / XP Pro / Black Screen with DVI display

Boot camp partitioned the hard drive on my new Mac Mini and restarted after I clicked Start Installation, but came up to a black screen. No blue installation screen, nothing.
I downed it with the power button and unhooked the display from the DVI port. I went and got a VGA cable instead and hooked it up via the DVI/VGA adapter and started up again with the Option key. Chose the Windows XP Pro SP2 installation CD and it went through the Windows installation OK.
The trouble is this Norwood Micro HD17A (17" widescreen) looks TERRIBLE on VGA whether I run Windows or Mac OS, because there's no selection for 1280 x 768 resolution. It looks great on DVI both on Mac OS and in Windows once I get XP Pro to load.
After logging in to Windows I can unhook the VGA cable and adapter and reconnect the monitor using the DVI. The moment I do this Windows looks great, with native resolution supported and everything's fine. But this is a terribly cumbersome login procedure!
It seems that XP Pro has no trouble communicating with this display, provided I can get Windows to load. I contacted Apple Support but they say it's a problem with Windows, so I submitted a support request to Microsoft. I'm waiting for them to tell me it's a problem with Boot Camp or the firmware.
I've seen descriptions of very similar problems on other forums (123macmin.com) and here, but no solutions anywhere. Anybody know what's happening here?

Update: Microsoft says it's probably a problem with the hardware:
==========================================
Mark, I would like to explain that the issue should be related to the display card driver. We still need to contact the Apple support to verify if their machine has been tested under the XP environment when DVI or AVG is in use. This issue is related to Hardware and cannot be resolved from a Windows XP standpoint. Our Windows XP Support Team deals mainly with issues related to the Windows XP Operating System. Thus, we are not the best resource for this issue.
Please understand the problem may be beyond our support boundary and, therefore, our help to troubleshoot this issue is limited. Let’s contact the manufacturer who will be more familiar with their products. To contact them, please access the following link:
http://www.apple.com/support/contact/
==========================================
Meanwhile I sent Redmond the System Information in an NFO file. More as this develops!

Macbook Pro Black boxes across screen then crashes

I have a Macbook Pro that I got 2 months ago. A couple days ago it froze and had black boxes all across the screen, then it crashed. Today when I started it up after I logged in while it was loading the black boxes popped up again, then it crashed. And when I tried to restart it it just beeped. The battery was around 50% so it wasn't dead. Its been fully updated and I haven't made any changes to it. Please help if there's anything I can do without taking it in

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

HGST TOURO MOBILE PRO BLACK 1TB EME

Similar Messages

Maybe you are looking for