Hitachi Touro Mobile Pro USB Harddrive in Windows 8

Did some one solved the Problem with the Hitachi Touro Mobile Pro USB Harddrive in Windows 8 ?
This drive is compartible with Windows 8 and get installed fine but in Windows 8 when you plug it in it gets installed as SCSI drive. I am sure it should be installed as IDE drive. The result is you cant use the drive right, like slow reading of a file up
to no reading at all. And this harddrive is relativly new so Windows 8 should be aible to do the job.
I wrote to Hitachi Support and they told me Microsoft 8 is the problem and Microsoft told me Hitachi is the problem....
The solution would be to re do the driver for USB 2.0 and USB 3.o so it can detect all USB devices correct and install the right driver.
I did install Windows 8 now 3 times and this problem occours for me still. So I will have to wait until this is solved , becourse I am not will to buy a new harddrive

Yes the Drive is compatible with windows 8 and windows 8.1, but it does not open any files on the hard drive so useless...I talked with Hitachi and the have send the correct driver to microsoft, but it is up to them when they get integrated.This drive works
just fine in Windows 7 Pro. I tried to use the drive in different Laptops with windows 8.1 and still the same problem. So clearly it is not a Problem on my Laptop !
Windows 8 installs the scsi driver not ide driver
And it is very disapointing for me that microsoft has still not solved this Problem. I spend alot of money on my Laptop and windows 8 + my harddrive . I will not buy a new harddrive becourse Microsoft is not willing to solve it for me......
With other words for me was the step to buy Windows 8 a bad idea. When I am aible to use my harddrive I will install it again..but until I get a clear statement that it is fixed I stop waisting my time with install windows 8 and going back to windows 7...Both
company make alot of money on user like me and that is what we get......

Similar Messages

  • Hitachi Touro Desk 2GB USB 3.0 incompatible with the W520

    I bought one of these:
    http://www.ebuyer.com/275652-touro-desk-pro-black-2-tb-3-5in-7200-rpm-htoldeb20001bbb-in-0s03240
    for the purpose of doing regular windows system images so I can restore the complete system in case of problems.
    Surprisingly, the crystal mark shows the USB drive being faster than my internal WD 750GB Scorpio Black, which I always thought was dog slow.
    However, this drive does not work with the W520 and windows system image.  You always get:
       The backup failed.
       The request could not be performed because of an I/O device error. (0x8007045D).
    First Hitachi told me that this was a known Microsoft incompatibility with all 512E drives (i.e. 4k blocks physically, 512k logicaly), which is false as I have two other 2GB 512E drives which work just fine (Vertbatim and a WD) with system image.
    Then they said it must be the computer chipset and USB drivers (both are up to date).
    So its RMA.
    See the details here: http://www.blogger.com/blogger.g?blogID=912095636414664130#editor/target=post;postID=715913504833881...

    The issue could be related to drive firmware not compatible with system board.
    You must update the hard drive firmware then check it may resolve the issue.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Apple Mobile Device USB Driver missing Windows 8.1

    Have just downloaded iTunes 11.3 but it now doesn't recgonize my 6th Gen. iPod nano.  Have narrowed it down to a missing Apple Mobile Device USB Driver in the Device Manager but there isn't a potential alternative to the iPod i.e. another device to choose from.
    How can I re-install/download this driver?
    Thanks.

    OK.  I found my answer, thanks to another posting.
    Uninstall iTunes
    Uninstall Apple Software Update
    Uninstall Mobile Device Service
    Uninstall Bonjour
    Uninstall Application Support....all in this order.
    Clear everything from Trash.
    Restart PC
    Install latest version of iTunes.
    It worked!

  • I disabled "Apple Mobile Device USB Driver" in Windows

    I did this because my device wasn't charging and I was trying (still am trying) to solve that problem.
    But once I disabled the "Apple Mobile Device USB Driver" under the Device Manager the device didn't dhwo up with an "X" next to it it just went away. And now when I plug in ipods it will not show up at all!
    I even booted into safe mode expecting to see more drivers there and I still didn't see the apple one to re-enable it. I should have deleted it then it would have just come back on a re-boot!
    Anyone have any suggestions?

    Re-installing the apple mobile device support under add and remove programs fixed this issue. Found this after many iTunes re-installs.
    Still have a charging issue. I will post that in a different message.

  • Can I burn "mavericks" on USB harddrive from windows ??

    I have one MAC. computer , and its OS damaged ... I have "mavricks" on PC >> Can I burn it on a harddrive from PC ??
    IF not __ PLZ addvaice me what i have to do >>>>>my MAC. computer can't boot and apper this

    I don't know how you would get the Mavericks installer on your Windows PC.
    Boot into Recovery on your Mac and reinstall the OS.
    To boot into Recovery hold down cmd-r on restart.
    You might just try resetting PRAM as that might fix your problem. Hold down cmd-opt-p-r after you hear the startup tone. Keep holding them until you hear the tone two more times then release.
    If it doesn't boot normally, you'll need to reinstall the OS using Recovery.
    http://support.apple.com/kb/HT4718

  • Connecting to Mac's external USB harddrive from Windows XP

    Hi
    I would like to connect to my external hardrive, that is connected to my Mac from Windows XP using apple share
    From Windows I can see the Macs internal hardrive but not the external one
    From the Mac -of course- I can see its external drive
    Is there a way to share that drive so Windows can see it through the Mac?
    Thanks for help
    Gyula from Belgium
    G5   Mac OS X (10.4.6)  

    Use SharePoints from Hornware.com

  • HGST TOURO MOBILE PRO BLACK 1TB EME

    Any experience with this, Seems good - I want to use it for editing in fcpx. USB 3.0, 7200 RPM,  should do it, I guess,
    https://www.deal.no/deal/default.asp?page=vare&ProdusentID=0S03560&ref=Prisjakt. no&utm_source=Prisjakt.no&utm_medium=cpc&utm_campaign=0S03560
    S

    ok so youre not booting from the bay caddy HD
    yes your info is indicative most certainly of a bad sata connector
    ive got 5 HD caddies 10 feet from me they all went toes up dead with hours of each other due to 5cent junk SATA connectors
    sorry.  but 3rd party HD devices can be great. but they flop due to using Incredibly junky sata connector circuitry
    6 out of 10 complaints of dead external HD are in fact wrong.     the HD are ok.  its their junk sata connectors sadly

  • Re: GE72 2QD APACHE PRO - USB Driver Issues Windows 10

    Quote from: graneri.fabien on Yesterday at 17:55:44it seems that things are moving and MSI is uploading a lot of drivers for W10
    Thanks for the heads up!
    I see that my laptop (GS70 2QE) already has the W10...

    Yes the model ID is KVR16N11K2/16. I have clear cmos as instructed in the manual and tried to run with just 1 memory. I even tried both by themselves to see if maybe 1 is faulty. The spare graphics card was a Asus 1...

  • X1 Carbon USB 3.0 port failed on Hitachi TOURO drive

    I bought a portable USB drive TOURO Mobile MX3 1TB last night.  It failed to work with the USB 3.0 port on my X1C.  It works fine with the normal USB 2.0 port, slower of course.
    I checked the USB controller driver is the lastest.  Just don't know how to solve this issue.

    I borrowed a WD USB 3.0 drive from a friend, and plugged into my X1C USB3.0 port.  It works like magic.  So I bought one WD drive myself.
    Conclusion is the X1C USB 3.0 port is not compatible with the Hitachi TOURO drive.  Strange thing does happen sometimes.

  • How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    How do I convert my Windows 7 Folder to an ISO image to burn to my  USB Flash drive (16GB)  in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    Sorry - confusing - My question has NOT been solved yet - can anyone help?

  • After updating to iTunes 12  the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

    After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
    I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
    I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • Why is Windows 8.1 causing my Verizon Mobile Broadband USB Pantech modem to auto connect/

    Why is Windows 8.1 causing my Verizon Mobile Broadband USB Pantech modem to auto connect? If I turn it off in Windows Settings I can not get service. As I am on a 5 GB plan I do not want my internet running at all times nor do I want o have to disconnect from the internet every time I turn my computer on.

        mebpapa,
    Hmm. That is a bit conflicting. After all, we don't want you to have to worry about usage running up or having to get disconnected each time you get on the computer. Ultimately, this is a software functionality of Windows 8.1 however. Have you noticed a high increase of usage when the auto connect is left on or are you just taking precautionary measures?
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • MacBook Pro 10,2 Early 2013 13" Retina - Hitachi Tuoro Desk Pro 4TB USB 3.0 keeps ejecting

    Hi, as subject says, My WD 1.5TB Caviar Black brand new is inside Hitachi Tuoro Desk Pro 4TB USB 3.0 HDD enclosure and keeps ejecting randomly only on wake from sleep. On clean boot HDD works fine. Anyone know solution to this problem?
    Thank you

    Hi, as subject says, My WD 1.5TB Caviar Black brand new is inside Hitachi Tuoro Desk Pro 4TB USB 3.0 HDD enclosure and keeps ejecting randomly only on wake from sleep. On clean boot HDD works fine. Anyone know solution to this problem?
    Thank you

  • Apple Mobile Device USB Driver shows up with an ! in Device Manager (Windows 8)

    When trying to sync my iPhone 5C with iTunes for Windows 8, the device is not recognised on the software. I have checked that my devices are up to date and uninstalled and reinstalled iTunes. I've uninstalled and reinstalled 'Apple Mobile Device USB Driver' in Device Manager, yet it continues to come up with an '!' next to it, and when checking the properties it states "This device cannot start. (Code 10) The specified request is not a valid operation for the target device." How do I fix this problem?

    Hi, acxdunicorn.  
    Thank you for visiting Apple Support Communities. 
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

Maybe you are looking for

  • Gtk messed up after latest upgrade

    After latest upgrades it seems that anything gtk-related (2 or 3) is drawn as garbage, see image on http://i.imgur.com/g57D0KS.jpg Tiled-qt on the left looks fine, however, as does chromium. Xorg.log here: [ 13.396] X.Org X Server 1.14.2 Release Date

  • IPhone 5 glass feels loose and there is a click when I press on the screen?

    Should I take to Genius Bar will they replace it?

  • Requesting feedback and advice on modifications to the FIDL examples

    Hello, With the help of this forum, I've been learning about FlexRIOs, low-level FPGA programming, the higher-level FlexRIO Instrument Development Library, and general techniques for high-speed synchronization and acquisition. I believe I'm now on th

  • Missing Printer Driver

    Hello, I just got my new MacBook yesterday. I'm very pleased with it so far. I went to hook up the printer, an HP Color Laserjet 1600, and the MacBook couldn't find the drivers. I went to the HP support site and they didn't list a driver for Mac, jus

  • Determining type of telecine

    Hi, I work at a post house and just started playing with Cinema Tools to perform an inverse telecine on finished projects of ours. Some of them have worked without a hitch using either F1-F2 AA or F2-F1 AB. Though there are several more which have be