Hi all. My charger cable broke up by the computer. I can fix it myself but I can find anywhere to buy the part. Can any one help?
Hi all. My charger cable broke up by the computer. I can fix it myself but I can't find anywhere to buy cable. Can any one help?
Replacement MagSafe DC cables are not available. You'll need to work with the pieces you have or buy a new AC adapter (which would be the better choice).
Similar Messages
-
all the other computers in the house connected
mac book is saying it is connected but it is notHey Cook1028,
Thanks for the question. I understand you are experiencing issues with Wi-Fi connectivity on your MacBook Pro. The following resource may provide a solution:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks,
Matt M. -
Third party accessories no longer supported... All my charging cables were great before the latest ios update, why?
I don't know which accessories you have, but the 'better' ones are usually made with Apple's cooperation. Stuff from Targus, Kensington, Belkin and the like.
Ive used a belkin and Onn lightning cable with my iPod with no error messages.
You SHOULD be able to keep using the accessories and just ignore the warning. But I say should because that may not be the case with everything.
The issue stems from various incidents involving shoddy third party accessories malfunctioning - sometimes quite spectacularly. But the headlines never read 'cheap knock off cable shorted out' they read 'iphone burst into flames' -
i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...
BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times. -
Hi all, I'm trying to download a film from iTunes onto my iPad but downloaded the HD version instead of SD and don't have the room to download it. Have removed everything I can to make space but still need another 1.2 GB. Is there any way I can delete it so I can delete the version I wanted, or even better change to the SD version? The film is still queuing in the downloads list. I've tried edit and delete but that doesn't work. I also can't re-download the film from iTunes.
Any suggestions very welcome!Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks
Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/
-
i have my brother i phone 5 but i dont have i cloud id or password i have serial number and all package the iphone can any one help me cuz i want open it please cuz my brother is dead sorry for time
first i thank u
but i just want apple id for his wife can remmber the password for the id he was have much more 5 apple id and i try to put them and i think u and apple can help us for we are older users of apple . them cant help us for just 1 time i have all package of phone the serial number and IMEI all of it . and thx u agine -
when ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?
You may need to connect the iPod in Recovery Mode and then restore it via iTunes. See this article for instructions on getting your iPod into Recovery Mode.;
http://support.apple.com/kb/ht1808
B-rock -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694 -
I upgraded to the new version and something went funky. Tab weren't working. So thought I'd uninstall and reinstall and now I'm stuck in the cycle. I can't uninstall as it tells me that a previous version needs the computer to restart. I'll restart and then try again and get the same message. If I try to just reinstall, it get the same message. Right now, I can't access Firefox at all. Help!
Hi @Skeetermarie85,
Welcome to the HP Forums!
I understand that you are unable to uninstall the software in order to re-install the software with your HP Officejet 8600. I am sorry for the frustration, but I am happy to help!
I am not sure which version of Windows you are using, but this should work with Windows XP and up. Please try a level-three uninstall by going through this fatal error guide, Fatal Error 'Error 1155. Not Found.' (MSI Error 1155) Displays During Software Installation in Windo.... Even though this guide does not match your error, I believe the level-three instructions will help.
If you still need further assistance, please reply with the version of Windows you are using. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
My iPhone 5 have the glass popping sound when I press on the top left corner of my phone but I don't know why, I don't see any visibility of the glass coming out. My friends all told me to not exchange because after all the software is perfectly fine.
My phone just turned 2 months old. But in Singapore as long your phone is under one year warranty I can still go for an exchange at the respective telco, but my friends all suggest me to not change now cause after changing it'll be a refurbished set instead of a brand new one.
-
All of a sudden my login password won't be accepted can any one help but the weird part is after a few min the computer just turns its self on
This happened to me, too. I couldn't log in to ANY accounts on the machine. Restarted, failure again, restarted again.
Solution: Wait.
After restarting I let the machine sit for a minute. Then it worked!
I ran Onyx and repaired permissions. Big mistake, apparently. Now I have to type my admin password everytime I want to move or save. All my Office docs open as Read-Only.
Maybe you are looking for
-
E.g., reading an online newspaper. I will open many tabs with different articles. About 1 out of 10 tabs will have a 706 error, which goes away when I click the reload button. It's most noticeable then, but it occasionally happens (1 out of 10 sites)
-
Change Button Name in JOptionPane.showMessageDialog
Hello, I've written the following code that invokes a JOPtionPane messageDialog, when the delete button is hit in the following frame and the selectedItem in the JComboBox is Default. I want to change the JOPtionPane button name from OK to Close. Is
-
I am trying to adapt a 3rd party calendar script for operation on my PHP site. I'm guessing that the script was writted for use with Access or something besides MySQL since it uses "*" as a wildcard in the SQL (which I can fix). But it also uses that
-
Publish / preview iphone app in landscape mode
Hi, I was wondering if it is possible to get my iphone app to preview in landscape mode without having to manually rotate it. I have it set to landscape mode with the landscape stage size, but it launches the preview in portrait mode. Thanks
-
CardManager not selectable?
Hello everybody. I have a problem using a JCOP J3A081 chip. The chip (NXP P5CC080HN, Package HVQFN32) ist in FUSE STATE: not fused and I can boot it without problems. But the CardManager is not selectable: /atrresetCard with timeout: 0 (ms) --Waiting