Hi all truble in goods movement

hi all
i want to create a new goodsmovement using bapi FM. for that i use "bapi_goodsmvt_create ".
problem is thats when i am creating the goods movement by using txn mb11 it works and when the same data i pass to the fm in se37 it generates a problem that "Goods movement not possible with mvmt type 201".
will u plz help me.
i have using this data:
movement type 201
plant 6101
storage location 0001
material 100-100
quantity 1
cost center 0000001000

Hi,
1) Don't forget to send GOODSMVT_CODE parameter
     GM_Code 01: Goods receipt for purchase order
     GM_Code 02: Goods receipt for production order
     <b>GM_Code 03: Goods issue </b>
     GM_Code 04: Transfer posting
     GM_Code 05: Other goods receipts
     GM_Code 06: Reversal of goods movements
     GM_Code 07: Subsequent adjustment to a subcontract order
Regards.
David

Similar Messages

Goods movement in Confirmation IW42,

Hai all PM gurus,
I have activated the back flush indicator in the Material master record.I have maintained the components in the task list also.In the maintenace plan for that the particular task list, the componetns also copied - flagged the check box back flush indicator manually in the components screen. While doing confirmation by IW42, the goods movements are not posted?. In the components over view screen also, the material is not copied?. What might be the problem?. Any configuration required.

hi
how you came to know the goods movement has not posted.while confirming definitely it will show message as confirmed and goods movement posted.
kindly read the sap definition for ALL components
All components on goods movements overview
Specifies that in the goods movements overview, all components are to be displayed that are assigned to the operation in question. The system posts the withdrawal of all components displayed in the overview as a backflush.
Use
You use this indicator to decide which components are displayed in the overview for individual time confirmation:
If you set the indicator, the system displays all the components regardless of whether or not the backflushing indicator is set for the component in the order.
If you do not set the indicator, the system only displays the components for which the backflushing indicator is set.
In addition, the material produced appears in the goods movements overview if it is to be placed into stock using an automatic goods receipt. You specify whether or not an automatic goods receipt is to take place in Customizing for the operation control key or in the production scheduling profile.
Dependencies
The indicator has no influence on the overall completion confirmation.
regards
thyagarajan

Expected Goods Movement in GATP

Hi Experts
Has anybody used the Expected Goods Movement (EGM) functionality in Global ATP ? I'm trying to find out if it requires EWM as a pre-requisite.
The SAP Help link seems to show this under GATP, but gives examples from EWM, so I'm not sure.
Business requirement is that in certain cases, show some inventory as 'available' a few days before it posts as goods receipt. EGM seems to meet the requirement, but we don't have EWM in scope.
Thanks
Rishi Menon

Hi,
1.Please keep the tick mark for the All components for Goods movements in OPK4,Confirmation parameters
As per the SAP Help
2.If you set the indicator, the system displays all the components regardless of whether or not the backflushing indicator is set for the component in the order.
3.If you do not set the indicator, the system only displays the components for which the backflushing indicator is set.
In addition, the material produced appears in the goods movements overview if it is to be placed into stock using an automatic goods receipt. You specify whether or not an automatic goods receipt is to take place in Customizing for the operation control key or in the production scheduling profile.
I think it can be helpful
Thanks
Balaram

Restrict all goods movements for materials untill the latest costing run ex

Hi dudes,
1 here i have a requirement that i need to restrict all goods movements in the month for all materials(SFG,FG) untill the latest costing run(standard cost estimate) on 1st of each month.
2. Can we restrict the status of process order in such a way that Conformation can be done only after the goods issues against production order. The goods receipt can be done only after the conformation of the process order.
Thanks in advance.
Robert.

Robert,
Procedurally you can block, by not opening the current period, before the costing run is completed, just when you wanted to release the cost estimate, at that time you can lock all users and then open the next period and then release your cost estimate and then unlock all the users. You need to work with your Basis/MM/FICO guys to have this procedure implemented.
On the GI Check before confirmation and Confirmation check before GR, you can use Confirmation and GR releated User exits to check. There are many posts on this topic, a simple search on this forum would take you to the thread.
Regards,
Prasobh

How to block all goods movements incurs to a warehouse?

Hi all,
I am wondering if you can provide me a way, a transaction code on how to perform the following?
How to block all goods movements incurs to a warehouse.
I am trying to execute LX23 (Stock comparison IM/WM) and try to remove the differences using batch input file.
SAP document indicates the prerequisite to use this feature is that all inventory movements to the warehouse be blocked before clearing the differences (i.e. adapt the IM figure to that of WM figure).
Appreciates.
Daniel

I think the requirement here is to block inventory movement (GR, GI, PCN etc.) to storage locations which are connected to your warehouse. Blocking movement on storage types in your warehouse does not serve this purpose.
Is it really necessary to block inventory movement when running LX2? LX23 eventually will need to correct the stock via IM posting at the end.
Anyway, if storage location level authorisation check is not currently in use in your system (OLMB -> Authorisation Management -> Authorisation check on storage location), you may try to activate authorisation check on storage locations connected to your warehouse so that those who has no M_MSEG_LGO assigned won't be able to post inventory movement to the warehouse.

I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

From what you say, I understand that you already installed Windows 7 on a second volume. Is this correct?
In that case, it doesn't make sense to use VMware Fusion unless you want to run Windows and OS X at the same time. If you do that, you will keep all your data.
If you haven't installed Windows 7 and you want to install it in VMware Fusion, you will be installing it in a virtual machine, so you won't lose anything.
I recommend you to have a look at VirtualBox first > http://www.virtualbox.org It's free and it's sufficient for most of users

Default or fixed Batch number in all goods movement???

Hi Experts,
Expecting to through light on the below and provide a solution.
We have requirement that for a material a default batch to be created as 000
and assigned . The same should flow automatically in all the Business
Transactions Like Production Order , Goods Issue, Goods Receipt , Sloc
Transfer etc.
Can anyone suggest the batches created for a material in Tcode : MSC1N only
to be allowed in any goods movement transaction.
One requirement Pl. except the Feild exit any other suggestions.
Thanks in advance
Regards ,

HI,
check the spro settings at Logistic General ---> Batch Management ---> Define Batch creation for goods movement, here you remove automaic batch creation and select proper manual assignment that suits to your requirement. If is manual only tnen yoy can assign your own batch,

Confirmation of Production Order without all Goods Movements

Hello experts!
I've tried to do a confirmation of one material that had only one level BOM with one material, but, when I try to do the Goods Movement in CO15, only the component appears. To another materials the goods movements was done for the two materials.
I've changed routing, BOM, material record... but I didn't have success.
Any ideas?
Regards,
Rodrigo.

Dear
You might have kept Backflashing Indicator -1 in MRP2 view and while doing CO15-In goods movement tab -You will find BOM compoenets with movement type -261 .But your requirement is to carry out the Auto GR-101 while confirmation posting .
Please do the following :
1.Goto -OPJK-Define Production Scheduling Profile -Here for that scheuling profile which have been assinged in Work Scheduling view -Mark the Auto GR active .
2.In the routing or in the Production Order -Operation Overview screen -Goto Operation Details -Slect the last operation -Assing the Operation Control Key which has Auto GR active like SAP Stanrda PP03 .Please check in OPJ8-Slect the Operation Control key -Hit the details information -Check the Auto GR Marked .Based on this while you will do CO15 , GR-101 (MIGO-101) will happen .
Hope it helps
Regards
JH

Tracking Goods movement based on Serial Number

Hi All,
I need expert advise on the following regarding the usage of Serial numbers from MM Perspective:
1. Whether the Number range for Serial Numbers can be given. This is to take care of the Goods bearing serial numbers, being delivered by the external vendor. I have two options: one to update the stock with the same serial number as given by the vendor & the second is to generate my own serial number for the material.
2. I also need to track the complete Goods movement based on the Serial Number of the material.
Pls advise asap.
Regards,
Shekhar.

Hi Kishore,
Thnx for your prompt response.
As requested, If I need to update the stock and want to continue with the serial number as given by the vendor (may be in the form of barcode), what config settings are reqd ?
Secondly, pls advise whether we can assign Number range to the Serial Numbers. Then we need to work upon situation where the serial number provided by the vendor is beyond the specified number range.
Pls advise.

Goods receipt inbound delivery using old goods movement transactions

Hi! I have a client who is still using the old goods movement transactions in the new ECC system. I would like to confirm whether it is possible at all to receipt inbound delivery (from shipping notification) using any of the old goods movement transactions? I don't seem to be able to find one that work.
Cheers!
SF

Yes, does anyone have any idea re this?
Cheers!
SF

Goods movement document based on stock determination

All,
I am trying to create goods movement document using BAPI_GOODSMVT_CREATE based on production order for movement type '261'. Before to that we have to use the function module BF_STOCK_DETERMINATION to pick the stock from appropriate storage location( for example: if order quantity is 3; then quantity 2 will be picked from
Un-restricted stock and 1 qty will be picked from consignment stock). What happens is when it gets into MB_CREATE_GOODS_ISSUE_ITEM inside the BAPI, at the routine "MM07MMFF0_FUSSZEILE_WA_PRUEFEN" there is a routine called "FORM WERK_PRUEFEN(sapfm07m) when it gets into this routine the values in the internal table"T158"
losses its visiblity. so i get an error "document type" missing, when the function module"FI_DOCUMENT_TYPE_CHECK"
is called as part of the routine.
But if i call the BAPI_GOODSMVT_CREATE without calling BF_STOCK_DETERMINATION material document is get created.
If any one worked on this please help me i tried for more than week but i couldn't solve it. I really highly appreciate you help.
With regards,
Shiva.

Called in two different program and it worked. In the first program i call "BF_STOCK_DETERMINATION" and export the values to memory and then i call the second porgram using "submit...and return"; import the values and called
"BAPI_GOODSMVT_CREATE". Material document is created.
Regards,
Shiva.

Value of the goods movement is negative:

Hi All,
We are posting GR for Import PO.
MIRO for custom has been already done.
But at the time of posting GR, system is throwing following error.
Value of the goods movement is negative:
Message no. M7301
Pls guide.
We are not working with subcontracting process. its a normal raw material purchase.
Regards
Edited by: sapsarang on Jan 21, 2011 5:44 AM

Can you please share the solution ...

Value of the goods movement is negative in GR

Dear all,
While preparing GR for an imports sch agmnt we are receiving an error message "Value of the goods movement is negative".
System is giving the diagnosis of the error message are "Sub-contracting by-product value is higher than GR value" & "Delivery cost is negative".
But our case is an imports GR and we have prepared GR for same sch agmnt on last month also.
Pl send us your valuable suggestions to resolve this issue. (What are all the other factors to cause this type of error)
Regards,
M.Sarathi

Hi
Check the following
1) In Scheduling agreement additional data for that line in ME32l, check for field Pr.date.cat. It should not be 5. If it is 5 and the price validity falls below GR date then you get this errror.
2)If you get that Pr.date.cat field in display mode, remove time dependent condition tick from document type config. then it will allow you to change.
Hope your problem will be solved. If not please revert back
Regards
Antony

Goods movement failures.

Dear Freinds,
All my movements are getting failed during the goods movement through CO11N transaction (movements w.r.t production order). These are appearing in transaction COGI. It is giving the error saying that "No stock posting possible for this material". But without any change ... I am able to save the movement. Error is giving the below detailed description
*"No stock posting possible for this material
Message no. M7097
Diagnosis
The material belongs to a material type whose stocks are not managed on a quantity basis.
Procedure
Enter a different material or terminate processing.
If required, check the setting of the material type for the plant in the Customizing system of the material master data."*
For your information, please note that we already maintained quantity updation check box in the material type configuration.
Regards,
Surya.

Dear Friends,
Thanks for your reply. Please note the below.
1. I have maintained the material type settings initially itself.
2. Today I observed that... this problem is coming only for the transaction CO11N. I am not getting this problem in CO15 transaction. But as per the clients requirement, I have to go for CO11N only.
3. This is not the problem of batch management or batch management activation / stock availability...because without correcting any data... I am able to save the goods movement in COGI transaction.
Regards,
Surya.

Good Movement issue in SAP retail ITS

Hi All,
Business is posting goods movement using SAP retail store ITS. The document gets posted in SAP successfully but storage location is not coming correct for a movement type. We have checked the configuration and it is fine. We are not able to replicate the issue in test systems.
Kindly help us on how we can able to find a cause of this issue.
Thanks for you help.
Regards,
John

Hi John,
Retail Store Application is desinged in such a way that for the movement type,the default storage location for the destination plant is automatically taken.
But you can modify the code as per your requirments by implementing the given BAdI.
CALL METHOD exit_gr_field->CHECK_INPUT_GR_item
Modify the field for stroage location W_UMLGO .
I hope this helps.
Regards,
Lorraine

Hi all truble in goods movement

Similar Messages

Maybe you are looking for