Hi, Bapi or function module to update RBCO table from an internal table.

I have a requirement to update RBCO table from an internal table. is there any Bapi or function module or any other method other than update, modify statements.
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jul 12, 2011 12:28 PM

I don't know if any FM exists for your requirement. But you may like to copy it into a custom table and modify it according to your enterprise needs.

Similar Messages

Bapi Or Function Module for Updating a table

Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.

Hi Shiva Kumar Tirumalasetty ,
There is no FM / BAPI to update directly to any SAP tables . SAP won't suggests to develop a FM/BAPI like that , as it will cause some data inconsistency problem .
We have to search and find BAPI's/ FM's for requirement specific if not exists then need to think about the alternate options (LSMW/ BDC etc..)
Hope this answers your question.
Thanks,
Greetson

Any Bapi or function Module to update standard table

Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.

I don't know if any FM exists for your requirement. But you may like to copy it into a custom table and modify it according to your enterprise needs.

HR-ABAP Any BAPI or Function module to update infotypes 167 & 170

Hi,
Can anyone let me know is there any BAPI or Function module to update infotypes 167(Health Plans) & 170(Flexible Spending Accounts).
Thanks,
Sandeep

Hi,
U can use HR_BEN_CREATE_PLANS internally it calls HR infotype operation as specified by suresh.
Suresh : If there are approximately 3000 records to be updated on regular basis do u think is it better to use BAPI's or BDC
regards
Vick

Updating database table from an internal table

Hi All,
I am updating a database table from an internal table.
I am changing the non-key fields in that table.
when I check sy-subrc = 4.
Record already exists, because I am changing non-key fields of the
database table.
Is there any addition like to accept the duplicate keys with update.
Alternatively, I have used Modify, It is adding new record,
Again, I have search the old record and use Delete on the database table.
Thanks & Regards,
Kalyan Chandramouli
SAP ABAP Consultant

Hi,
You are right, the field which I am trying to change is a part of primary key.
Because, sy-subrc = 4. says,
No line with specified primary key exits in the database table.
I have a Z-tabel, with Kunnr Vkorg Matnr Bzirk Bztxt Split_percentage
In this table primary key consists of KunnrVkorgMatnr+Bzirk.
I am able to change the Split_percentage using UPDATE.
Now, my client want to change Bzirk, Bztxt also in the table.
How can I Go.
Thanks & Regards,
Kalyan Chandramouli
SAP ABAP Consultant

BAPI or Function Module to Update the Alternative Payer (KNZA) of Customer

Hi Experts,
My client requirement is to update the Customer Permitted Alternative Payer during creation of BP
Would you please let me know the any BAPI or Fictional Module available to UPDATE the u201CPermitted Alternative Payer (KNZA)u201D of Customer Master.
iam trying SD_CUSTOMER_MAINTAIN_ALL function module, its failed to update the KNZA tables. please help to close the issue.
Thanks in Advance.
Venkatesh M.

Hi Ravi,
Thanks for the quick reply.
The Function Module, what you are given is BTE. it will not trigger when creating of contract.
My Requirement is when creating the contract for the particular BP, we need to UPDATE the Alternative Payer of Customer.
Here i required BAPI or Function Module to change or Update the customer master Alternative Payer (KNZA).
Regards,
Venkatesh M

BAPI or Function Module to Update Vendor Details

Hi Friends,
I need to update Vendor Details (Street) in my program using a BAPI or Function Module. Is there such thing available which can do my job?
Regards,
Raju...

Hi,
Thanks for the Reply.
I tried to use the FM Vendor_Update... It updates the adrress field in the table LFA1. But it is not reflected in the transaction FK02.
So, Is there any thing that I have to do after the FM Vendor_Update is called so that the address field is also get reflected in address field of FK02 transaction.?
Regards,
Raju...

Bapi or function module to update rstgr field in bseg table

what is the bapi or function module used to update the fields in bseg table particularly "rstgr" field?

Hi,
Use Bapi
BAPI_ACC_DOCUMENT_POST
Regards,
Prashant

Bapi or Function Module to update Material Master Data

Hi Friends,
           could anyone let me know any BAPI's or Function Modules for Material Master UPdate.
Thanks in Advance
Regards
Tina

hi Tina,
check this BAPi BAPI_MATERIAL_SAVEDATA to create and change the material master .
Try ....
BAPI_MATERIAL_SAVEDATA
REPORT Z_BAPI_MAT.
               STRUCTURE DECLARATIONS                             *
TABLES: BAPIMATHEAD, "Headerdata
        BAPI_MARA,    "Clientdata
        BAPI_MARAX,   "Clientdatax
        BAPI_MARC,    "Plantdata
        BAPI_MARCX,   "Plantdatax
        BAPI_MAKT,    "Material description
        BAPIRET2.     "Return messages
DATA:V_FILE TYPE STRING.
DATA:
BEGIN OF LSMW_MATERIAL_MASTER,
    MATNR(018) TYPE C, "Material number
    MTART(004) TYPE C, "Material type
    MBRSH(001) TYPE C, "Industry sector
    WERKS(004) TYPE C, "Plant
    MAKTX(040) TYPE C, "Material description
    DISMM(002) TYPE C, "Extra Field Added In the Program as itsrequired
    MEINS(003) TYPE C, "Base unit of measure
    MATKL(009) TYPE C, "Material group
    SPART(002) TYPE C, "Division
    LABOR(003) TYPE C, "Lab/office
    PRDHA(018) TYPE C, "Product hierarchy
    MSTAE(002) TYPE C, "X-plant matl status
    MTPOS_MARA(004) TYPE C, "Gen item cat group
    BRGEW(017) TYPE C, "Gross weight
    GEWEI(003) TYPE C, "Weight unit
    NTGEW(017) TYPE C, "Net weight
    GROES(032) TYPE C, "Size/Dimensions
    MAGRV(004) TYPE C, "Matl grp pack matls
    BISMT(018) TYPE C, "Old material number
    WRKST(048) TYPE C, "Basic material
    PROFL(003) TYPE C, "DG indicator profile
    KZUMW(001) TYPE C, "Environmentally rlvt
    BSTME(003) TYPE C, "Order unit
    VABME(001) TYPE C,
    EKGRP(003) TYPE C, "Purchasing group
    XCHPF(001) TYPE C, "Batch management
    EKWSL(004) TYPE C, "Purchasing key value
    WEBAZ(003) TYPE C, "GR processing time
    MFRPN(040) TYPE C, "Manufacturer part number
    MFRNR(010) TYPE C, "Manufacturer number
    VPRSV(001) TYPE C, "Price control indicator
    STPRS(015) TYPE C, "Standard price
    BWPRH(014) TYPE C, "Commercial price1
    BKLAS(004) TYPE C, "Valuation class
END OF LSMW_MATERIAL_MASTER.
               INTERNAL TABLE DECLARATIONS                         *
*to store the input data
DATA:
BEGIN OF it_matmaster OCCURS 0.
        INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.
DATA:
END OF it_matmaster.
*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
     INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.
*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
     INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.
               TO UPLOAD THE DATA                                  *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = V_FILE
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = IT_MATMASTER
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
               DATA POPULATIONS                                    *
LOOP AT IT_MATMASTER.
BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
BAPIMATHEAD-IND_SECTOR = IT_MATMASTER-Mbrsh.
BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
BAPIMATHEAD-BASIC_VIEW = 'X'.
BAPIMATHEAD-PURCHASE_VIEW = 'X'.
BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
BAPI_MARA-BASIC_MATL = IT_MATMASTER-WRKST.
BAPI_MARA-MFR_NO = IT_MATMASTER-MFRNR.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-OLD_MAT_NO = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-BASIC_MATL = 'X'.
BAPI_MARAX-MFR_NO = 'X'.
BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP.
BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
IT_MATERIALDESC-LANGU = 'EN'.
IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
append IT_materialdesc.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      headdata                   = BAPIMATHEAD
      CLIENTDATA                 = BAPI_MARA
      CLIENTDATAX                = BAPI_MARAx
     PLANTDATA                  = BAPI_MARc
     PLANTDATAX                 = BAPI_MARcx
    FORECASTPARAMETERS         =
    FORECASTPARAMETERSX        =
    PLANNINGDATA               =
    PLANNINGDATAX              =
    STORAGELOCATIONDATA        =
    STORAGELOCATIONDATAX       =
    VALUATIONDATA              =
    VALUATIONDATAX             =
    WAREHOUSENUMBERDATA        =
    WAREHOUSENUMBERDATAX       =
    SALESDATA                  =
    SALESDATAX                 =
    STORAGETYPEDATA            =
    STORAGETYPEDATAX           =
    FLAG_ONLINE                = ' '
    FLAG_CAD_CALL              = ' '
   IMPORTING
     RETURN                     = IT_RETURN
   TABLES
     MATERIALDESCRIPTION        = IT_MATERIALDESC
    UNITSOFMEASURE             =
    UNITSOFMEASUREX            =
    INTERNATIONALARTNOS        =
    MATERIALLONGTEXT           =
    TAXCLASSIFICATIONS         =
    RETURNMESSAGES             =
    PRTDATA                    =
    PRTDATAX                   =
    EXTENSIONIN                =
    EXTENSIONINX               =
WRITE:/    IT_RETURN-TYPE,
        2   IT_RETURN-ID,
        22 IT_RETURN-NUMBER,
        25 IT_RETURN-MESSAGE.
           IT_RETURN-LOG_NO,
           IT_RETURN-LOG_MSG_NO,
           IT_RETURN-MESSAGE_V1,
           IT_RETURN-MESSAGE_V2,
           IT_RETURN-MESSAGE_V3,
           IT_RETURN-MESSAGE_V4,
           IT_RETURN-PARAMETER,
           IT_RETURN-ROW,
           IT_RETURN-FIELD,
           IT_RETURN-SYSTEM.
ENDLOOP.
Regards,
Naveen

Need BAPI or Function Module to update MAEX Table

Hi Experts !!
I need to update the MAEX table in mass level through a batch job.
Updating the table directly is not recommended. So, a BAPI or a FM would have helped.
One more thing, if I update it through a BAPI or FM, will the change history log in MM02 or MM03 be maintained automatically by SAP ?
Also if I directly update the MAEX table, how to maintain the change history log ?
Below are the fields which I want to update.

Those FM are update FM (check with SE37) called at end of transaction after checking data validity and must not be called alone in a customer program, using those FM is not better than direct SQL update of database (or you actually want to duplicate SAP standard checking and find every update FM to call, wrong idea usually)
Read also 1710449 - Transaction MM17 (Mass Change) or BAPI BAPI_MATERIAL_SAVEDATA does not support update on database table MAEX. So nowadays the correct solution is the use of Batch Input
Regards,
Raymond

BAPI or Function module for updating shipment

Hi experts,
Do you know any bapi or FM to update shipment events (i actualy want to update events and dates under 'more dates' tab in vt02n) ? If so, please provide details about FM and what interface parameters to pass.
Thank you very much!
Kind regards

Did you try this functions,
RV_SHIPMENT_UPDATE
- Guru
Reward points for helpful answers

BAPI or Function Module to update IMZO

Hi,
I'm looking to update table IMZO from a custom program but can't find a FM or BAPI to update the standrd table IMZO. I know this is updated from CJ20N but I can't find the FM or BAPI that does this.
Can anyone help?

Hello Damien,
I am in the same situation. I need to add/update Investment Program positions in projects programmatically. Did you find a solution for this, please? Or at least the way to update table IMZO?
Thanks a lot in advance,
Abel

Bapi/Function Module to update course/training data

Hi,
I need a bapi or function module to update the course/training session data in transaction LSO_PSV2, like the course name or course location.
Any idea?
Thanks in advance.
Best regards,
Sónia Gonçalves

Hi,
What do you mean by update routing? Mass update of the routing master data?
If update of routing master data only is necessary, you can use LSMW to automate mass change, however, if you also need to update other affected areas such as Production Order, you can also apply LSMW to Read PP Master Data of the affected transactions.
Thanks,
Kumar

BAPI or Function module for WAHD2

Hi all,
Is there any BAPI or function module to update consumption values in the t-code WAHD2 ?
I found one WAHD_DISPLAY_CHANGE but when I executed this, it is opening another page where we can edit the values like in the t-code. So I am not sure how to use this inside my program.
Please share your valuable thoughts on this.
Thanks.

The FM is WAHDA_WRITE_WAHD_SINGLE

How to create Function Module with TABLE parameter (for internal table)

Hi Guys,
I am trying to create a function module by using TABLE parameter. I have to pass an internal table to this function module for processing.
But it saying : TABLES parameters are obsolete!
And I am not going further.
Please suggest any work arround.
Thanks

Hi,
create a table type in SE11..
Then use that in your function module importing/exporting/changing parameter for passing internal tables..
Thanks,
Naren

Hi, Bapi or function module to update RBCO table from an internal table.

Similar Messages

Maybe you are looking for