Hi. Can you tell me if using the sat nav functionality on the in-built maps app on my iphone 5, uses just GPS (hence no cost) or GPS and data roaming, hence a running cost for the extent of my journey?
Hi
As the tile says, I am looking to find out if I need to purchase an actual Sat-nav app or if I can use the inbuilt functionality and not incur additional data charges
Thanks
The built in Maps apps requires a data connection to download mapping data. So, if you want to avoid data costs, you need to purchase a navigation app that stores the data locally on your phone.
Similar Messages
-
Can you tell me what I should do? My iPad shows the following message, " This iPad has not been backed up in 4 weeks. Back ups happen when this iPad is plugged in locked and connected to Wi-Fi" Thank you in anticipation you will be able to help me, Ray Mill.
Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
hello there peeps, i cant use the iphone that i bought from a local buy, swap and sell site. the phone was restored to factory setting and i used it for 4 months but after that a message appeared and said that this phone has been lost. i tried to restore it again but i need the previous owner's apple id and password.
i tried to contact him but i cannot reach him already, i tried reaching him on the sell site's page but still no response. i am pretty sure that the phone is not stolen coz i was present when he restore it to its factory setting. i just wanna ask you people what else can i do with it to be activated again, i paid $200 for this iphone 4 and dont just want it to go down to the drain. PLEASE HELP.. thank youonyok13 wrote:
... i cant use the iphone that i bought from a local buy, swap and sell site.... i just wanna ask you people what else can i do with it to be activated again,
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?
you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC -
I am an international student studying in Kettering University, US and i have an isic that is international student identity card. Can you tell me what is the procedure to claim for a discount by using my isic. Want to buy ipad air 2 for education.
Welcome to the US! I think you can just take your ID card to the Apple store or shop online : http://store.apple.com/us/browse/campaigns/education_pricing
the site has all the info for eligibility and available items for purchase -- I think you can type in your school to see if on list of approved schools. I think the ID checking is rather benign. discounts are modest from what I recall. -
I have not been able to use my digitalPersona v4.11.3826 (fingerprint login) since I downloaded firefox 4.0.1. Will this be incorporated to the add-ons or if not, can you tell me what the easiest way is to go back to using the older version of Firefox?
EgisTec, who now provide the HP Simplepass application, have made an update of the scanner software for Firefox 4, for details see https://support.mozilla.com/questions/814397
-
Can you tel me the exact status values for TBTCO table
Hi Experts,
Can you help me any one to know about "Status" field in TBTCO table.
what is the meanings of this status values.
1.P.
2.S.
3.F.
4.R
5.Y
6.A.
7.Z
Can you tell me any function module to find status for the program and for the jobname.
Thanks.
SailuHi,
Just used the where used list and found INCLUDE LBTCHDEF.
Check it. seems clear
btc_running LIKE tbtco-status VALUE 'R',
btc_ready LIKE tbtco-status VALUE 'Y',
btc_scheduled LIKE tbtco-status VALUE 'P',
btc_intercepted TYPE btcstatus VALUE btc_scheduled,
btc_released LIKE tbtco-status VALUE 'S',
btc_aborted LIKE tbtco-status VALUE 'A',
btc_finished LIKE tbtco-status VALUE 'F',
btc_put_active LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
Regards -
I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?
I see an upgrade path from Safari but don't want to change that and would like to be able boot from Maverick when needed.
Is this possible and how?
Thank you!On the Apple site I see an upgrade path but not from scratch. I will use my current systems and then it place a complete install of Maverick on the other drive to boot from?
Thank you! -
How can I unlock my iphone from Iusacel (Mexico) I moved to Canada and the Iusacel company told me they cannot do it. Can you tell me how? I want to keep using my iphone.
The normal process is to request the unlock with the carrier. They process it and pass it on to Apple to be applied to the Apple's iPhone database. The carrier would then inform you when Apple has provisioned the unlock, and you would restore your iPhone as a new device in iTunes to apply the unlock (you would get a message at the end of that restore as new in iTunes indicating the unlock was successfully applied). You could then restore your iPhone from backup to get everything back as it was.
However, for some carriers, you seem to beed to complete the iTunes restore from within the country where they provide service. Regardless, have you tried restoring as new in iTunes to see if it processes any provisioned unlock request? Just be sure to backup the iPhone first, before restoring as new. -
Hi,
Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
Thank you
Regards,
AnthonyHi,
The default max attachment size is 8MB.
Regards.
Mike -
hi, please can you tell me when the ipad mini 2 is coming out? i don't know whether to get the ipad mini, or wait for the 2nd generation
Oh, ok. thanks for the help anyway
-
Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
-
Can you tell me the system requirements for arch please.
can you tell me the system requirements for arch please.
Enhu, welcome to the forums. Listing minimum requirements is pretty standard for most distros nowadays, and this being Arch, we expect you to do a minimum of effort to find out something like that. The wiki link is pretty clear on the memory, and since Arch is i686, any i686 CPU will do - something a search would have told you as well. This has been covered ad nauseam already.
Closing before we get any more attempts at trolling Windows. -
I am using Mavericks. In Mail I had a list of VIPS and used it extensively. Now it has disappeared and VIPs on the menu bar is faded. There is nil response to VIP in help. Can you tell me what has happened?
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/VIPSenders.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
Can you tell me where I can find the exercise files for Dreamweaver
can you tell me where I find the exercise files for Dreamweaver
Creating your first web site in DW CC - 5-part tutorial. Click on the blue GET FILES button to download the ZIP folder.
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.
Maybe you are looking for
-
Extractor for PM process orders
Hi Experts, We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but no
-
The link to the Java SE JDK document (javadocs) does not seem to be working at present: see page Java SE 6 Documentation - http://www.oracle.com/technetwork/java/javase/downloads/index.html#docs
-
Linking BW report outputs with VC story board output
Hi Everyone, I have a scenario where I have display list of report names in VC output screen and I have to link these texts with few BW report outputs. This can be achieved in WAD using HTML coding by linking the report's URL, how can we do the same
-
ı bought the newsweek magazine subscription and couldnt verify the mail so now when ı try to sign in my account it says authentication failed. ı took the bill so what will ı do now? How will I enter and download my magazine. thanks
-
Named suddenly launching at startup
When my installation of OS X 10.6.4 startups the built-in firewall is asking for permission to allow "named" to accept incoming network connections. I understand that named is a daemon responsible for, or at least related to, DNS resolution. Is that